Proper workflow when using both Final Cut (Motion) & Adobe Effects

I am trying to use some Red Giant Software, and its capabilities are severely limited in Final Cut and Motion because you can not use the bezier pen to create shapes on the fly. For Final cut and motion you have to create the shape you want in illustrator 1st, and then import it as an SVG in final cut or motion. There are quite a few plugins that have this issue.
What is the best way to have all my movie editing only in FCP, but to use adobe effects in place of motion (or in addition to). My major fear is that I am continually want to be making changes to my already compressed video out of adobe effects, so when I pull it into FCP I may want to make a change further compressing in effects, and back into FCP and so on and so forth. If I save it as uncompressed video my video files would be so large then it would take years to render each time.
Any suggestions?

Your solution was definately helpful, however if you don't mind I have a few more questions.
This is the only thing that I found that would help me move FCP into AE without rendering & compressing and degrading quality.
http://www.studiodaily.com/main/training/howtutorials/f/post/Final-Cut-Adobe-CS4 -Workflow_10122.html
The problem with this is that I would never use premier to edit my video, I only want to use After effects for very specific plugins (like Trapcode 3stroke and Particular). If you look at this video it seems you would need you get the entire studio which serves no purpose as I don't want to use Encore or Premier just AE. I was hoping that I could something like the video (save it as XML format - something non-destructive), to transfer my movies between both applications.
It looks like your solution however is the best thing that I have been able to find. I also read on some posts that were labeled in October 2008 that there were some 3rd party translation software products that were supposedly going to be released in 2009. If anyone has any information about it - please let me know. If I don't find anything else I think the reference movie workaround is probably the best thing - the danger is (as another person said below), I was afraid that if I use more then 1 application to edit a reference movie that it would screw up audio & video sync or screw up the final render in some way.

Similar Messages

  • There is no video preview when using a Final Cut Pro X project as my source.

    When I send my FCPX project to Compressor 4 there is no video preview in the preview window. I have the source selected from the dropdown preview settings but the screen is black with no sound, even though the timecode is correct. Any suggestions? Thanks in advance.

    If you export (command e) as a QT movie, then bring that into Compressor as the source file, can you preview it?
    Russ

  • Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    Hi, I have small problem, for some time in music area I had two folders to use 1. Apple loops for soundtrack pro 2. Final Cut pro sound effects now both are gray and with out content may I know what happend

    I just went through this and it appears that my Focusrite Saffire was the culprit. I connected all the outputs on the focusrite according to the way the jacsk on the back were labeled and then set up the multichannel speaker setup to match. Then I went into STP, created a pink noise clip and panned it around, the LFE, center and rears were not in the right place.
    I reconnected the hardware to match the 5.1 pan pot in STP then changed the multichannel speaker setup to match. Everything appears to be correct now but I would have loved to have been able to just assigned the output busses to correct outputs in the saffire.
    Next step is to pan that pink noise around with my SPL meter to calibrate the room.

  • What settings are best to export sharpened images from Photoshop to use in Final Cut?

    I need to give a professional photographer the correct dimensions to export her images from Photoshop for me to use in Final Cut. I told her:
    1080 x 1920, 300 dpi, and also to Convert Images to Apple RGB (Final Cut doesnt work well with Adobe RGB, I am told). Her images have alot of heavy sharpening on them--she is an artist--and when i import them into Final Cut, many of the lines that should be crisp are zig-zagged, and if I apply motion to them, they "shake."
    My problem is specific to images that have been highly sharpened in Photoshop; i have imported lots of professional images before with no problem. I am on deadline and hope someone out there will see this.

    You were right about trashing the finalcut plist. As well as a very specific set of directions I now have put together from what you and others have said elsewhere, and this is it, i hope it helps others with their Canon XHA1 and Final Cut Express HD:
    Trash the final cut preferences (plist) in your Home - LIbrary.
    go into the Canon XHA1 menu, make sure that you're not set to down-convert to DV.
    Get out of the menu. Shut the camera off,
    plug in the firewire cable to both the camera and computer,
    and turn the camera back to VCR mode.
    Open up Final Cut, and go to Easy Setup ,
    choose HDV- Apple Intermediate Codec 1080i60
    This worked beautifully but took me nearly four hours to figure out, including researching the web and experimenting in FCE HD

  • What is the proper way to back up Final Cut Pro x

    What is the proper way to back up Final Cut Pro x?
    Final Cut Pro X & Motion 5 are the only two programs I do not have a hard copy for.
    Click and dragging the files from the applications folder to an external harddrive seems to simple to be correct.
    Are their additional folders or actions that are required to back up these software?
    I'm having problems and was instructed to back up all files ASAP before taking my iMac (mid 2010) to the Apple store for treatment.
    Please help!
    josh

    The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
    Most apps from the Mac App Store are simple drag & drop installation. DId FCPX or M5 just download to your Mac or was there an installer app involved? If they just donwloaded, then dragging them to backup media should be enough. If there was an installer, then you should backup the installer. But these apps aren't going to disappear from the Mac App Store in the short time that your Mac is in a repair shop. You can also download them again fromthe Purchased pane after you have signed into your account.

  • "media server application expectly quit" when submitting from final cut pro

    browsing through the list, it seems the problem couldn´t be solved so far.
    doing some systematic testing, the following riddle shows up:
    ... when adding a QT ref movie (or movie) directly to the compressor batch list and submit to the cluster, everything runs fine.
    ... when exporting from final cut pro:
    menu -> export -> using compressor ...
    submitting in compressor using:
    1) Cluster: this computer: everything keeps running fine.
    2) Cluster: MylovelyCluster ....
    the job fails with the message "Failed: HOST [clusternode_name.local] media server application unexpectedly quit"
    since there is 5TB + of data to be compressed, copying files to the render nodes is not an option. all data is on a shared xraid, connected via giganet.
    Any ideas, any hints appreciated !
    regards,
    p.s. Anybody running an XSAN having the same issues?
    G5s, G4s, G3s, macminis, powerbooks   Mac OS X (10.4.7)   xraid

    ... well, the answer is in other topics.
    showstopper explains it patently again and again ...
    thanks from here.
    shortly: when submitting from FCP, every node HAS to have FCP installed and MUST have access to the same relative file path (mounted shared volume). If the volume is not present, the render node will open the reconnect media dialogue and waits for user input.

  • How can I export a file that may use in Final Cut Pro?

    Hello friends,
    May I know how to export a file that I can use it Final Cut Pro???

    If you are talking about rendering then just use any production codec that FCP supports. You have access to them all. Use the Render Cue or create a custom preset in the Adobe Media Encoder.
    If you want to do something like dynamic link with FCP, that does not exist. You can save a PPro project as a FCP XML but any PPro effects or PPro settings unique to PPro will not come across. If you turn an After Effects project into a FCP project by going through PPro as was suggested then you will NOT get any of the effects you applied to your composition or any of the animation or anything but the footage In and Out points, opacity, rotation and position because that is all that will be moved into PPro because After Effects plug-ins are not compatible with PPro. If there is a dynamic link to an AE project in your PPro project that will not move to FCP at all. You'll get nothing.
    So the long and short of it is if you want the work that you have done in AE to show up in FCP you must render the project. I use ProRez 444 10 bit for any work I do on FCP. You can make a custom Output Module preset to help speed up the workflow.
    If you are new to AE please read this on rendering: After Effects Help | Basics of rendering and exporting
    If you are really new please go through these three tutorials: Basic Workflow

  • How doI Import HD clips from HTC Desire HD for use in Final Cut Express?

    Before anyone says it I know it's dead easy with and iPhone but how difficult is it to import video from the HTC Desire HD to use with Final Cut Express? I am looking at purchasing this phone and would be interested in people's thoughts.

    Hi Tom,
    Pleased to make your acquaintance, having recently used your FCE4 editing workshop as a bible I'd like to thank you for making an understandable read! Re my comments: This was early days with the application and I have a lot of work to catch up on before I get to work with it properly. In a test I set it up using the 720p25 apple intermediate codec and it needed rendering. the phone uses 3gp to record. I haven't gone into any detail with it yet, still busy trying to migrate from windows mid project from adobe premiere before even attempting to provide any focus to my camera on my phone. I will report back when I get there if anyone is interested!

  • Why do I keep getting a Video rendering error: 10008 when exporting in Final Cut Pro X?

    Why do I keep getting a Video rendering error: 10008 when exporting in Final Cut Pro X?
    I'm using FCPX 10.2
    Yosemite 10.10.3
    MacBook Pro (13-inch, Early 2011)
    2.7 GHz Intel Core i7
    8 GB 1333 MHz DDR3
    500GB with 308GB free

    It appears Apple's latest update has solved the issue. Whew!
    MacBook Pro (13-inch, Early 2011)
    2.7 GHz Intel Core i7
    8 GB 1333 MHz DDR3
    500GB with 308GB free
    Yosemite 10.10.3
    FCPX 10.2

  • Do I need Final Cut Pro HD when I have Final Cut Studio?

    I will be starting my second project on my new mac and using final cut pro. It will be an instructional DVD. This is my first posting and I guess my first attempt at reaching out (baby steps).
    I will be borrowing an HD camera (some consumer grade). My Question is do I need Final Cut HD when I have Final Cut Studio installed. I notice Final Cut Pro 5.1.4 has HD import and export settings.
    Also, since I have mentioned my project is there any quick reference ideas for a learn to play an instrument DVD, CD or anything.
    And lastly as I wonder off my thread a little. Is this Discussion forum my quickest way of getting an answer, I mean is there anyone who will let me bug them from time to time?
    Thanks
    Mac Pro 1,1 Mac OS X (10.4.9) 2X2 GHz Dual-Core Intel Xeon 1 GB Ram
    Mac Pro 1,1 Mac OS X (10.4.9) 2X2 GHz Dual-Core Intel Xeon 1 GB Ram
    Mac Pro 1,1   Mac OS X (10.4.9)   2X2 GHz Dual-Core Intel Xeon 1 GB Ram

    I will be borrowing an HD camera (some consumer grade).
    Forgot to welcome you to the forum... Welcome.
    Before you jump into this project you may want to do some research. The format you are talking about is HDV, highly compressed and some would say difficult to edit with. A search here on HDV will give you plenty to read and probably point you to some interesting articles.
    Might also consider why you want to shoot HD at all right now since you will most likely be going to Standard Def for distribution.
    You'll find that if you just check in and browse the topics every day or so you'll pick up lots of good information (and probably a few laughs)
    If you're looking for examples for this type of project, just hop down to your local music store. Most have "How To" DVD's for sale.
    Good Luck
    rh

  • Photos used in Final Cut Express

    WHen I include photos from iPhoto in my Final Cut Express movie and put the movie to DVD; some of the photos displayed on the TV are good while others are distorted and jump or flicker while displaying. It appears that the ones that are 800K or less display good while those that are about 2GB are the problem. Apple care told me that the photo resolution when taken photos to use in Final Cut Express HD should be set at 720x480 or there abouts.. No where in any documentation can I find this information. Even when I put in a call to the Final Cut Express technical help they could give me an answer. Can anyone help with this... MY DV camcoreder clips display perfectly.. Ken Landgraf

    (I'll assume you meant 2MB, not 2GB, Ken.)
    I also expect you are talking about distortions when you zoom and pan the photos. 720x480 is okay for still photos and it resolves to about the resolution of a TV screen. If you want to zoom in, you should guess the magnification and approximate the dimensions so that the zoomed portion resolves at about 720x480. A 2MB photos is likely to be from a 4megapixel camera (highest resolution setting) and 2300x1700 pixels.
    Note that a 'still' photo in FCE will usually look sharper than on a TV because of the whole chain of 1950s technology that produces a TV image.
    If you are commenting on distortions you see when watching your video in FCE, you really need to 'render' the video and watch it on a TV monitor. 'Jumpiness' can be an artifact of the RT rendering or (lack of) TV interlacing.
    If you are zooming in/out of images and you're seeing lots of sparkly artifacts, like shimmering on water ripples, try adding a 'gaussian blur' and/or 'flicker' filter to a clip. Either will soften artifacts without much blurring of either the zooming image.

  • Is it possible for a mac to recognise a camcorder as a video input without using imovie/final cut?

    Is it possible for a mac to recognise a camcorder as a video input without using imovie/final cut, I use web based video capture software and need an HD input that the mac would recognise as if it were a webcam?
    Any help would be greatly appreciated!
    Thanks

    HI,
    I used to use an analogue Camcorder and a DV converter that had Firewire output at one stage when starting out in iChat.
    See the Item 3  in the "Before your Start" item on this page
    8:41 PM      Saturday; November 12, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously
    Message was edited by: Ralph Johns (UK)

  • When you uninstall final cut pro does your projects delete too

    When you uninstall final cut pro does your projects delete too

    No, only the app is removed.
    The Events and Projects are completely untouched and ready to use when you reinstall or update FCP X.
    To uninstall simply drag the FCP X application icon to the trash and delete it.

  • When i open final cut pro x  when it starts loding the projects it shows the spining beach ball and is stuck wat can i do?

    when i open final cut pro x  when it starts loding the projects it shows the spining beach ball and is stuck wat can i do?

    Possible  corrupted project or media fies. Here's what I'd suggest.
    First trash preferences. If that doesn't work…
    Move your Final Cut Projects folder into a folder named Hidden Folder. See if FCP then launches. If it doesn't hide your Final Cut Events folder. Once FCP launches successfuly, create a test event and project.
    To track down the problem, successively move load events and projects from hideen to their proper location and open FCP. When and if you get the crash you have hopefully located the problem.
    The easiest way to do this is to purchace Event Manager X ($5).
    Good luck.
    Russ

  • Whats the best blu-ray writer to use with final cut pro x

    Whats the best blu-ray writer to use with final cut pro x

    The Sea Tech Blu Ray Writer works great with my Mac.

Maybe you are looking for