Properties Panel Default Size

I have the strange situation whereby when I open Xcelsius the Properties Panel is approx 50% of the width of the Xcelsius window. When I resize it to be around 25%, close and reopen Xcelsius it's still around 50%. I'm pretty sure it didn't used to be so wide.
I'm thinking I've got a Registry entry messed up or perhaps the default canvas. Can anyone point me in the right direction to sort this out?
Thanks
Charles

Hi Charles,
Here is how to reset the user defined settings (window sizes, which windows are open) in the registry.
You should make a backup of your windows registry before making any changes...
1). Close Xcelsius down.
2). Run regedit.
3). Navigate to and delete this key:
HKEY_CURRENT_USER\Software\Business Objects\Xcelsius\Settings
4). Then start Xcelsius and you should be good to go again.
I'm not sure what causes this but for me it sometimes happens when I am running Xcelsius and I change windows screen resolution, then have been into and out of preview mode, not all the time though...
If you can help me figure out some simple steps to reproduce it we can log the bug and hopefully get it fixed in the future...
Regards,
Matt

Similar Messages

Safari Panel Default Size - How to set?!

Hi and tnxs for reading.
How can we set a default size for popup / new panel in Safari?
Sometimes we surf website were by clicking a link we have another panel opened. I have a lot of this popup in some website I am using for my job.
However I have to resize these panel everytime because they are too small by default and cannot read all the msg inside.
What is the way to resize by default with dimensions I choose?
Many thanks

Hi ..
You can resize a Safari window by dragging out the bottom right corner of any Safari window.
Or try full screen mode.
Control + Command + F enters and exits full screen mode.

Tools- FP Grid Default panel grid size (pixels) does nothing

Hi all,
LV 2013 SP1
I want to set up FP grid of 5 x 5 pixels.
When I go to LV Tools -> Options FP Grid Default panel grid size (pixels) and change to 5 pixels it does nothing.
The FP still uses 12 sq pixel grid even when I restart LV.
Does this happen to others? Am I doing something wrong?
Thanks.
Solved!
Go to Solution.

Hi battler,
what happens when you open a new VI after changing the grid settings?
Those changes do not apply to old VIs as is written in the LabVIEW help here!
Read the LabVIEW help also here…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Character Styles in CSS Properties Panel are not correct

I am using Adobe Illustator CC.
I am trying to export all of the charter styles as CSS. However the CSS panel is not generating the correct style.
Right now, in the Character Styles Panel and CSS Properties Panel I have 3 styles (Default, h1, h2)
This is how they are defined in the Character Styles Panel:
1. [Normal Character Style]:Helvectic Neue LT Std, 55 Roman, 16px
2. h1: Helvectic Neue LT Std, 25 Ultra Light, 35px
3. h2: Helvectic Neue LT Std, 45 Light, 18px
HOWEVER
When I go to the CSS Properties panel the code is not showing the Font Style:
This is how they are defined in the CSS Properties Panel:
1. [Normal Character Style]:
.NormalCharacterStyle
font-family : Helvetica Neue LT Std;
font-size : 16px;
color : #19131F;
color : rgb(25, 19, 31);
2. h1:
.h1
font-family : Helvetica Neue LT Std;
font-size : 35px;
letter-spacing : 0.53px;
color : #FFFFFF;
color : rgb(255, 255, 255);
Missing: 25 Ultra Light
3. h2:
.h2
font-family : Helvetica Neue LT Std;
font-size : 18px;
text-transform : uppercase;
color : #FCFCFC;
color : rgb(252, 252, 252);
Missing: 45 Light
Am I not doing somethign correctly? Is it a problem with my font or with Illustrator?
Also, in case it makes a difference, I only have the default paragraph style defined. It's style is; Helvectic Neue LT Std, 55 Roman
Thanks!

CSS cannot render typographical multiple weight fonts simply because that's just not how it works. All CSS does is reference a physical font file and its properties and while it's possible to use the font-weight and font-style attributes to make standard fonts lighter or bolder it does not compare to anything you would do with the font in a real design environment. That and of course you still need to define fallback/ substitution options - the Helvetica Neue you are referencing is exclusively available on Apple systems only and even if what you are trying worked off the bat, it would be useless on alternate devices that have no access to the font.
Mylenium

CS4- properties panel not displayed correctly

I just installed Dreamweaver v10. The properties panel information is being clipped. Does anyone else have this problem?

Good evening,
make sure your dpi is set to default 96 dpi, I had this problem because working with a small screen and old eyes, I adjusted my font size, had to set back to default 96dpi, hope this helps

Main Properties panel's width

I've notice that in Fireworks 8, the main properties panel's
width extends
under the side panels, where in fireworks mx 2004,
dreamweaver 8 + under,
and flash 8 + under, all have the main properties panel just
in the middle
column under the canvas (assuming you are using the default 3
column
interface layout). This creates a problem because its now
wasted space and I
can't have as many side panel open at one time because of
this.
So the question is, is there a file I can change or modify,
maybe even take
a file from fireworks mx 2004, to make the width of the main
properties
panel stay in the middle column like its suppose to?

Hi Charles,
Here is how to reset the user defined settings (window sizes, which windows are open) in the registry.
You should make a backup of your windows registry before making any changes...
1). Close Xcelsius down.
2). Run regedit.
3). Navigate to and delete this key:
HKEY_CURRENT_USER\Software\Business Objects\Xcelsius\Settings
4). Then start Xcelsius and you should be good to go again.
I'm not sure what causes this but for me it sometimes happens when I am running Xcelsius and I change windows screen resolution, then have been into and out of preview mode, not all the time though...
If you can help me figure out some simple steps to reproduce it we can log the bug and hopefully get it fixed in the future...
Regards,
Matt

DreamWeaver in Win7: cannpt see the Properties Panel

Can anyone tell solution to this problem?
I've installed Dream to Windows 7, works fine, but I cannot see the Properties Panel
Solution is, to set Font Size in Control Panel to "Default (100%)"

That fixed the problem - thanks!
I did have both of those fonts ON already, but noticed that there were other versions of Tahoma and Verdana (with lower version numbers) that were OFF. I switched OFF the newer versions and switched ON the older versions of Tahoma and Verdana and the properties box was full of text, buttons, etc. just like it was supposed to be.
I've spend hours talking with Adobe, who said it was probably a problem with my display drivers and sent me to Apple. Apple said they were no longer supporting the ATI board in my 2009 MacPro and that I would need a new computer. I told Adobe and they said they would continue working on the issue, which they have - I've received several phone calls and emails from them, but no solutions.
How weird that running the newest versions of Tahoma and Verdana caused the problem and turning them off and using the older, Microsoft Office versions solved it. Must be a lesson here, but I don't know what that would be.
Thanks again!

Multiple SPRY Collapsible Panel Defaults

I have a page with three collapsible bars and want the only the first to be open and the other two to be closed when the page loads. How do I do this?

I figured this one out - duh! The properties panel allows you to set the panel defaults to opened or closed.

How to set default size for .chm window?

I know there is an answer at grainge.org, but it seems to be
referring only to a .chm using skins, which I am not.
Anybody know how to make the default size of the .chm larger?
thanks, Leisa

Lacona,
The default window size is set in your windows properties
dialog in RoboHelp. It can also be set manually in the .hhp file
before you compile. If you open the .hhp file in a text editor,
such as Notepad, you will see a [WINDOWS] section and for each
window defined there will be a series of numbers. One of these is a
vector [in square brackets] that defines the original position.
These are absolute screen pixels.
In older versions of RoboHelp, one of which I use, there was
a limit to the size of the window RH would allow but when I changed
the .hhp, RoboHelp didn't try to overwrite it unless I reopened the
Windows properties dialog. I'm not sure how the latest versions
handle this but you might try editing the .hhp with Notepad and
then compiling the .chm.
John

Properties panel does not entirely show

Part of the properties panel is not shown - what cause this? - how can it be fixed?
Using DW CS4 and Win 7
Arrows show how parts of the panel are not seen

1600 to 900 is screen resolution and font size was 125% - changed it to 100% and that allowed full properties panel to be displayed
Thanks everyone - Merry christmas
Date: Thu, 19 Dec 2013 15:00:47 -0800
From: [email protected]
To: [email protected]
Subject: Properties panel does not entirely show
    Re: Properties panel does not entirely show
    created by Nancy O. in Dreamweaver support forum - View the full discussion
What screen resolution are you using on your display settings?
What font sizes are you using on your system?
Nancy O.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5946046#5946046
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5946046#5946046
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5946046#5946046. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Dreamweaver support forum at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Xcesius properties panel not visible

Hi Experts,
I have a very basic question. I have been working on Xcelsius for quite some time and I have suddenly noticed that the properties panel in my xcelsius has disappeared. I have not made any upgrades.
In the 'View' menu, I have the option 'Properties' checked. Is there anything else that I need to take care of.
Thanks,
Sreeni

Check the size of the Properties window , I think u might reduse the size of the Properties window.

Symbol Properties panel not updating or refreshing

Y'all,
I'm running FW CS5 under Windows 7 Pro (64-bit), and my Symbol Properties panel has stopped updating when I select a symbol to modify. I have to close and re-open the Symbol Properties panel to force it to refresh.
If I have the panel open and select a symbol on the page, the panel remains blank.
If I have edited a symbol then deselected it, that symbol's properties remain visible in the Symbol Properties panel after the symbol is deselected.
If I have edited a symbol then select another symbol, the first symbol's properties remain visible in the panel and it does not update to show the properties of the newly selected symbol.
In all cases I must close and re-open the Symbol properties panel to force it to refresh and update.
I've also noticed two other peculiar refresh problems lately - when the rulers are visible and I either zoom in / zoom out on the document or change the application window size, the top ruler often vanishes. I have to minimize then maximize the Fireworks application window to force a refresh and get the rulers to re-appear.
Finally, the little document info boxes at the lower right corner of the canvas showing document size and zoom level often go blank or vanish when I either zoom in / zoom out on the document or change the application window size. I have to minimize then maximize the Fireworks application window to force a refresh and get the info boxes to re-appear.
It seems that the problem may be related to some larger Fireworks screen refresh problem. It did not behave this way when first installed - it began happening recently, and the only thing that has changed was a minor update to all of the CS5 design tools (including FW) about the way that image metadata is handled.
Is anyone else experiencing odd refresh errors? Is it possible that an extension could cause this?
Any help and advice would be appreciated, because it has become really cumbersome to use component symbols.
Thanks,
Dave

After digging around and looking at what has been updated or installed on my computer since these weird refresh problems began, I may have identified a possible cause.
Adobe installs the Java runtime with the Creative Suite (I'm not sure why, but it's there), and a few weeks ago the 1.6.20 update installed itself, but it failed multiple times before installing, then Windows 7 informed me that a component was improperly installed with the incorrect privileges. Last night the 1.6.21 update installed itself without any errors, and this morning Fireworks seems to be working normally again.
I'll keep monitoring FW for weird refresh problems, and if they return I'll post an update. It is possible that the 1.6.20 update broke something that was fixed by the 1.6.21 update.
Can anyone tell me why the CS programs require Java and what it is used for?
Thanks,
Dave

CS5 properties panel - poor performance

Hello,
I have recently started to experience an issue in Fireworks CS5 where the properties panel is very slow to update.
Once I have selected an object, I can select other objects of the same time with no delay. For example, from no selection, if I select a peice of text there is a 2-3 second delay while the properties panel updates to show the font type, size, leading, etc. Now if I select other text, the properties update accordingly, with no delay.
If I change the selection to a bitmap, there is another 1-2 second delay while the properties panel updates again.
All other panels and functions seem to be working correctly with no delay. Can anyone help with this issue?
Thanks.

Thanks folks... I figured it out. The answer was in the OPTIONS side menu of the EXPORT menu.

DW properties panel won't display properly ?

Title pretty much says it. Ever sence i got DW the properties panel dozen't display all the its items. I have uploaded a screenshot of it. I have dual monitors and have tried adjusting the resoulution up and down on both of them I run one at 1400x900 widescreen and the other at 1280 x 1024 both 19 in monitors adjusting resolution on iether dosen't make a difference. Another thing I thought it might be is my system font size its set to medium 125% I haven't tried adjusting that because thats right where I want it.We choulden't have to adjust our computers to the software, it should be the other way around. One more thing dose anyone know how to adjust the font sise in bridge ? the folders panel font is real small.

See
CS4 Property inspector fields truncated (Windows)
http://forums.adobe.com/thread/446724

Making Properties Panel reappear

Hello,
I cannot see the Properties Panel on my laptop anymore. I was using the dual monitor mode with my laptop at work. However when I try to use Xcelsius using only my laptop screen, the properties panel is not visible anymore. Any help you can provide will be much appreciated.
Thanks.

Various methods at your rescue:-
Delete the folder from HKEY_CURRENT_USER\Software\Business Objects\Xcelsius\Settings\en and restart xcelsius
Resize your laptop screen size
Check if the reinstallation work
Best Luck!!!

Properties Panel Default Size

Similar Messages

Maybe you are looking for