Properties Tab in Adobe 10 vis-a-vis in Adobe 9
How can i input additional details in the properties tab in Adobe reader 10 like i used to input in adobe reader 9
You can edit the property tabs in Acrobat, but not Reader.
Similar Messages
-
Is it possible to change the settings in AR Properties Advanced tab with Adobe Acrobat XI?
I noticed when I went to print a PDF double sided, that despite the following the guidelines from Adobe on this process, it still printed single sided. I checked the properties of the PDF itself and on the Advanced tab, the DuplexMode was set to Simplex and was greyed out.
Is it possible to change the settings in that tab with Adobe Acrobat XI?
Regards
SharonDear Sara
Thank you for your reply.
I have two printers, both support automatic duplexing. Any PDF we receive
or create we are unable to print double sided on our mac mini¹s. I didn¹t
make it clear in my question that we were fine on Windows XP, but, having
recently changed to Mac have encountered this frustrating problem.
I did a lot of research prior to recording the question and it appears I am
not the only one who has come across this problem, and I have followed the
guidelines that Adobe promote on their website to be able to print double
sided, which doesn¹t work on the mac mini Osx Mavericks.
Because the Properties, Advanced tab has ³Print Dialog Presets² that are set
to simplex and greyed out I took that to mean that no matter what printer
settings I make, and I think I¹ve gone through all that I can, the pdf will
not print double sided on Mac but will on XP.
Sorry this isn¹t the reply you must have been hoping for and look forward to
receiving further advice in regard to this matter.
Regards
Sharon -
Adobe Captivate 'Not Responding' when properties tab is used.
Hi
Thought I'd share my revelation with you all in case anyone else is having the same problem.
I have just spent the past 2 days trying to figure out why Adobe Captivate 5.5 freezes whenever I try to use most of the options in the properties tab. I have a fairly robust system running windows 7 x64, incorporating a quad core processor, 8gb ram and 2 x 8gb graphics cards. I had tried everything including a complete re-instalation of all my Adobe software, only to discover that I have been a bit daft.
You see, eventually, I came to realise that it only froze when I was trying to adjust the properties of objects that had text in them. Upon checking my 'Fonts' folder I realised that I had over 4000 fonts installed. Initially I tried hiding all but the system fonts but this seemed to achieve nothing so I moved all of the non-system fonts to another folder and 'Hey Presto' Adobe Captivate now works like a dream.
Don't know why it froze when I tried to adjust any of the properties (not just the font) but it did. Now I just need to figure out how I am going to manage all of my fonts.Hi there
You might consider trying a freeware application called Font Frenzy.
Click here to view the site
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
No Layout type in the properties tab ????...
Hi Experts,
I am creating a AIF in the Tr SFP, when I go to the properties tab there is no layout dropdown list available and when I try to activate the form its not allowing me to activate instead a message on the status bar "Action Cancelled by user" and always in inactive mode.
Please help me out on this.
Thanks in Advance,
PraveenHi Experts:
I am having the same issue, where the system I am on is SAP ERP Central Component 5.0 (ECC5.0). There is no Layout Tab to define ZCI or xACF. I'm not sure if this is relevant, except that, I cannot get my Interactive form to work.
All PDF tests in SAP are passing except interactivity.
When I call my Adobe Interactive Form and set sfpdocparams-fillable = 'X' I get an error:
Error creating PDF Document -PDF Exception: Stream does not represent a PDF document.
I have applied the Usage Rights credential properly and my form displays read-only when sfpdocparams-fillable = BLANK. While in transaction SFP, I can see that my interactivity works when displaying the form through the Preview PDF tab.
Does anyone have any suggestions as to what I might do to determine why my interactivity is not working?
Thanks for your time experts,
Sean -
No video tab in adobe media encoder cs4
Hi,
I'd like to change the bit-rate when I export, but I have no video tab in adobe media encoder cs4 v4.2
http://adwords.google.com/support/aw/bin/answer.py?hl=en&answer=105647 explains how to change bit-rates but it unfortunately doesn't help me.
Any ideas would be apprciated.
MichaelI found the video and audio tabs etc.
First open in, "device central".
And then if you have "basic settings" displayed you still can't see the "bitrate" and "advanced settings".
You either have to scroll down, or close "basic settings".
And then all is revealed.
Michael -
How to get rid of the properties tab popping out when I create a new shape?
Hi! I am having a bit of trouble getting rid of the properties tab that pops out everytime I create a new shape in Photoshop CC.
Are there some settings to stop this from happening? I have my space strictly organized, as most of you probably, and I need to close it each time I create new shape... so it's frustrating.
Thank you!After you draw out a shape, then go to the Properties panel fly-out menu and uncheck Show on Shape Creation
-
Viewing print thumbnail only works after a TAB in adobe reader X
Hello,
Viewing print thumbnail only works after a TAB in adobe reader x.
In adobe reader 9 when you go to a specified page (the red circle in the screenshot), the example on the right site directly go´s to that page,
In adobe reader x when you go to a specified page nothing happend in the example, when you then use the TAB then de example wil go to the specified page.
Is this a incident in Adobe Reader X ?
On myPDF files have to be specially enabled for you to save the contents. It appears the old version of these files had this capability, but the new version does not. Without Acrobat you will be unable to save the files. If these are truly government files, you can try going to the government's website and see if you can download a copy that will allow you to save the form field data.
-
Properties Tab Stopped Working
Is there a way to make the properties tab start working again. After I add a component in Design View, the properties tab for that component doesn't appear. Even after I right-click on it and select Properties, the Properties tab for the component still says 'No description available'. This worked for the first few projects I created but I can't get it to work for any new projects.
I not sure if property sheet stopped working. There was a bug that caused the description part of the property sheet to occupy the whole area of the sheet when a build window opens at the bottom. Property sheet is a split pane and it is possible to resize the description are to occupy smaller space thus revealing the actual properties again.
-
Property missing in Node Properties tab
Hi,
I have created a Boolean Local Node property 'DoNotModify' with default value 'FALSE' and assigned it to a Property Category 'Accounts', but when i open the hierarchy and check the node properties in the 'Accounts' category the property is not showing up. I then wrote a property query on the same property and this is returning all the nodes in the hierarchy. So this means that the property has been created correctly, but why am i not able to see it in the Node Properties tab?? Please help. I am working in version 11.1.2.1.
Thanks,
Krishna
Edited by: 903463 on Jun 24, 2012 11:45 PMKrishna,
You need to assign the new property to an appropriate node type of the hierarchy else you will not be able to view the properties.
If you still want to validate, click "Show all properties". This will available in later patches of 11.1.2.1. Not sure whih patch are you in of 11.1.2.1 -
Hello,
Has anyone used Tabs in adobe forms to switch between windows/screens?
Is it possible?
Thanks,
BalaHmm interesting requirement ,
I have nt tried but i guess u can try implementing this scenario using subforms with row of buttons .
all the buttons can be placed in a subform (header subform).
The different UI can be placed in differnt subforms under this header subform.
Each subform will be controlled by a button .For the button fomcalc script can be used which makes the elements in the sunform visible and hidden .
design wud be :
button1 button2 button3
subform1 | subform2 | subform3 |
script will be as follows
event :initiaize
subform1.presence="visible"
subform2.presence="hidden"
subform3.presence="hidden"
onclick (for button2 in subform2)
subform2.presence ="visible"
I believe it would be a great experience to implement this.
Do let me knw the further update on this idea.
Swathi
Do offer pts:-) -
Properties Tab and Miscellaneous Tab in Workflow
Hi Experts,
I want know how the Properties Tab of all steps works in workflow?
please give some example workflows to check?
i found in SAP library WS30000015 as an example.
but i'm not able to find
1. how the sap.bc.bmt.wfm.process.status system settings is created?
2. how the values are created for the system settings?
what steps i need to do to create system settings and also how to create values?
how it will be used exactly in workflow?
please tell me about Miscellaneous tab also.
Is there any FM which gets the Creation Date and Time as input and gives the details of all the workitems created on that particular date. same position or job or org. unit as an input and gives the workitem details of that particular position or org. unit or job?
please clarify
Regards
SM Nizamudeen.
Edited by: Nizamudeen SM on Nov 28, 2008 7:38 AM
Edited by: Nizamudeen SM on Nov 28, 2008 7:41 AMHi,
Check out the links below.
I guess they can guide you.
[SAP EXPRESS Pop-up not displaying;
[http://www.sapfans.com/forums/viewtopic.php?f=26&t=315757]
regards,
Raj -
SVN properties tabs not updated
Hello,
I am using SQL Developer version 3.2.20.09 with SVN version 1.6.20.
In SQL Developer I have two plsql modules opened, each in its own tab. I want to view the svn properties of the modules. After selecting Versioning>View subversion properties in the edit window, a tab opens with header 'Subversion properties' and the svn propererties of the module.
Switching to the second plsql module, and executing the same menu option, nothing happens in the 'Subversion properties' tab. The properties of the first plsql module is still shown. The only way to show the properties of the second module is closing the 'Subversion properties' tab, and execute the menu option again.
Is this a known problem?
JoopHi Ranjith,
According to me theare woyld be two reason for your problem.
1)you would be not haveing proper permission for those file which your are faceing problem.
2)Your IE Ver would be 7.0 sometime this happens that EP not work fine with IE7.0 but no probs with IE Ver 6.0.
hope this helps if so please reward points .
Regards .
Vinit Soni -
Where is the New CSS Rule button that was in the properties tab?
There used to be a plus button in the properties tab. In Dreamweaver CS6 it is gone. I loaded in a tracing image, I want to type the * tag so the image and everything else will align to the upper left coordinates 0,0.
SeanJon Fritz II, you Rock! That was it I can see the Plus Button, and other icons at the bottom of the old CSS Panel by hitting Control + Alt + Shift + P.
Thanks, Have a great day!
Sean -
Missing Webdynpro activex control tab in Adobe Layout
Hi,
Can anybody tell me the reason for missing Webdynpro activex control tab in Adobe Form Layout?Only few tabs such as standard,ISR are available?Not all tabs are visible.
Regards,
Rohini.MHello,
The WebDynproActiveX objects are actually xfo files stored in a folder locally. Path looks like the following: C:\Documents and Settings\<user_name>\Application Data\Adobe\Designer\en\objects\
There should be a WebDynproActiveX folder containing all the xfo representing the objects. If you don't have them, download an install again the latest version of the LiveCycle Designer.
Regards,
Francois -
Page properties tab location?
I closed the properties tab at the bottom of the page and can't seem to figure out how to open it again. Can you please reming me where this is located. Thanks again.
Window > Properties (Ctrl+F3/Cmd+F3).
Maybe you are looking for
-
Need the last exit/BADI to get PO spool after PO is created or changed...
Hello Experts, I have a requirement wherein I need to get the spool number of my PO during create or change mode. I have checked BADIs like ME_PURCHDOC_POSTED, ME_PROCESS_PO_CUST but they are called BEFORE the spool is created. What I want is an enha
-
Hey , I hope someone can help.. been trying to upgrade from 9841 to 9860 for the last few days.. and I cant seem to get the preview build download part to work.. Seems like "80246017 Flight Settings Failure Content Download Error: Download failed" is
-
I have over 5 USB cable chargers from apple products that I have brought this year. All the USB cables have started to fray at both ends and all are Not working and they look old like I have had them for years. I am using a USB cable that I have had
-
Assignment of company code to the Equipment.
Hi All, I am new-able in sap pm please guide me. During creation of Equipment why we are assigning the Company Code, if plant is already assign. What is the need of company code. Thanks & Regards, B.K.Pathak.
-
Blocked scheduling defect equipment
Dear expert, I have a query regarding defective equipment. I used serial number management to track the history of equipment. I replace equipment with the new one. After i dismantle defective equipment the equipment status is become AVLB (available).