Properties window and Object Browser window not visible anywhere

Although "Properties" and "Object Browser" are ticked in the View menu, the windows do not appear anywhere on the screen (yes I have looked everywhere). The "Components" window appears as normal. It does not matter what Xcelsisus file I am working in, as the problem is the same even when I first launch Xcelsius. I was running Xcelsius Engage 2008 with Office 2003 and did not have this problem. I recently upgraded to Office 2007 and now I have this problem. I run the same software on my notebook without any problem. Very frustrating. Any ideas on how to fix the problem? Thanks JR

Hi JR,
This should be something simple. Please use the shortcut to get focus to :Object Browser" by pressing Ctrl+4, If you are unable to spot the object brower, it must be minimised eighter of the corner of Xcelsius window.
Use "Restore Dwon" button which will be at the right top corner (before Close Button) so that your Xcelsius window become smaller size. Try to find the border of the working window and make it smaller in all 4 sides using mouse. You will find the Object Browser, Property window somewhere.
Please revert if this does not helps you.
With best wishes
BaaRaa.

Similar Messages

Roles and Object queries tab not visible in MBO attribute properties

Hi,
We have installed the SUP Personal developer edition 2.0 on a windows 2008 server. I am trying to create a sample application for getting the list of sales orders by using the SAP BAPI. Once I have the MBO in place, I see that I cannot view the 'Roles' and 'Object Queries' tabs in the 'Attributes' section of the MBO properties.
Does anyone know why this happens? Is it due to configuration issues? Do help me out as we're trying to get a demo working.
Thanks & Regards,
Vaishnavi

Hi Vaishnavi,
Check whether you have selected "Advanced" mode . You should be able to see it.
Regards,
Viju

Firefox does not put the file extension ".exe" onto the firefox application, and the browser will not open.

I downloaded firefox 3.6.6 from the website, followed the install directions and the browser does not open. I opened the task manager and firefox.exe was not in the process list. Locating the target using properties from the desktop icon if found that the application file did not have the ".exe" extension that it showed in the icon field for location. I have uninstalled and reinstalled several times with the same result. I am running windows XP Media Center Version 2002 service pack 3.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.3; OfficeLivePatch.0.0; InfoPath.1)

This would usually only happen if the originals were .doc, .dot, .docm, .dotx or .dotm files and someone changed their extensions. Does your Office installation open docx files created in Word 2013? If not, perhaps the Office installation is
faulty. In that case, try repairing the Office installation (via Programs & Features > Microsoft Office > Change in the Windows Control Panel).
Cheers
Paul Edstein
[MS MVP - Word]

Crystal reports not rendering properly and toolbar is also not visible in firefox 21.0

my application works fine in chrome and internet explorer when it comes to crystal reports but Firefox is not rendering them properly. they are disturbed and toolbar is also not visible. i am using visual studio 2008 for development and the crystal reports that come with it. it works fine on local system but have issues when deployed on online server. all my clients are facing the same problem. they have to use alternate browser for printing reports. But i would be happy if Firefox renders them correctly. Anyone can help?

i made this change in my code using Visual studio 2005 VB
rpt.ExportToHttpResponse(ExportFormatType.PortableDocFormat, Response,
False, "Title you want")
it make me a PDF and i dont need the cristal report bar to print it
i hope you help you

My existing object styles are not visible

My existing object styles are not visible in the object style panel- only via quick apply (so I know they exist)
Any idea how I can make this panel functional again?
Using CS6
Thanks!

@ Bob, I think you posted the response to a differnt question...
@ chandasz, see Replace Your Preferences

I have just rented two movies and after download they are not visible anywhere in iTunes for me to watch.

I have just rented two movies and after download they are not visible anywhere for me to view. Usually in the iTunes menu there is an option call 'rentals' where rented movies sit until they expire, this is no longer visible. The movie files are listed in the finder under music/movies.... With the rest of my iTunes data, but they will not play in iTunes from there and I can't add them to my library for watching.
The only thing I am currently doing differently is that I have just subscribed to iTunes Match; would this affect my rentals?

Hi Cmcb,
Under your Library list, you should see "Movies". Click on that, and you will see a screen with several tabs at the top - Rentals, Unwatched, Movies, Genres, Home Videos, etc.
As Hackintosh indicated above, click on the Rentals tab, and your movies will be displayed there. Doulbe click on one to start playing it.
If you do not have your sidebar showing, go up to View at the top, and click on Show Sidebar. Then you will see your Library lists on the sidebar, which will include Movies.
Cheers,
GB

I have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice

i have iphone 4 and it connect to some wireless networks and some others are not visible while other lphones can find these networks and i tried to restart the phone many times and there is no result, kindly advice

Some updates and clarifications:
1. I already have my 2.4 channel fixed.
2. Wireless network name is 8 alphanumeric characters; no spaces
3. Already using WPA2 security with a 10 alphanumeric key (again, no spaces)
4. I am running Airport Utility 6.0, Mac OS version 10.7.4
I should also say that these problems started happening less than a month ago...prior to that all devices where working normally.
An added update: My two e-readers (nook ST and Kindle 3) are also refusing to connect...perhaps confirming that I have 2.4 GHz issues?

Elements 11 Preview Window not visible in dual monitor mode

When I go to dual monitor mode the preview window is hidden. I can still hear the audio from the clip but I can't see the video window. It is still hidden when I switch back to single monitor mode. The only way to bring it back is to close out the program and reopen it. Does anyone know where it goes and how to make it visible?

MAINEEDIT
I have just set up for Premiere Elements 11 Dual Monitor Mode in Windows 8 64 bit computer.
How do you have your monitors set up...Extend Across.. or other?
I am not having any problems keeping track of what I believe you are referring to as the "Preview Window". So please excuse
if I double check with you via the following screenshot.
Preview Window which can be brought up
a. double clicking the file in Project Assets
b. double clicking the file on the Expert workspace Timeline
I am going to go over this one more time with my Premiere Elements 11 and Windows 8 64 bt computer to see
if I can create the situation that I am interpreting that you have.
Thanks.
ATR
Add On...This especially makes me ask....
When I reopen the program the preview window appears in its normal position.
The Preview Window is going to close when you save/close the project. As you saying that you re-opened the project
to find the Preview Window opened?

Properties Window not functional (DW 8 MAC)

I am sure that this is something that I did wrong somewhere,
but I can't figure out for the life of me what it is :)
As of last Friday, the Properties window below my Design
window does not show the properties of the item that is selected
(independent of tag); it also does not allow me to input data, such
as a URL. I have not installed or deleted any new software over the
past couple of weeks and did not make any changes to the website
from other tools either.
At this point, this has me reduced to coding up straight HTML
to maintain my site, which is less than optimal.
I have also tried this under DW CS3 and get the same results.
I have also gone through the general troubleshooting steps,
including renaming the Site Prefs file and creating a new Admin
user and trying it from that account.
Any suggestions are welcome.
Thanks,
Frank

Same probleme here using CS3. But some more trouble:
Since about 5 days, i'm not able to use the upload function
directly after opening a file, the button is grey. I have to switch
to the code view and back to the design view in order to be able to
upload the file.
Some other strange things:
- Changes in an opened CSS file are not displayed in an html
file opend. Even pressing the F5 key doesn't change the
design-view. I have to close and to reopen the file in order the
see the changes.
- Working with tables is not possible using the design-view:
Changes I make using the "properties-bar" don't change the source
code of my file.
- there are a lot of other things which make problems at the
moment. I'm not sure how to solve these problems - perhaps I need
to re-install the application.

Safari - New Windows Not Visible

I'm having problems with Safari - when I try to open a new window, either by File>New Window or by clicking a webpage link which opens in a new window, the new window does not appear.
The windows are opening somewhere as they show in the list when clicking on the WIndow tab (although selecting them in the list does nothing, nor does clicking the mouse side buttons to show all windows).
When quitting Safari I get the multiple pages open message, i.e. "There are 27 windows open in Safari. Do you want to quit anyway?".
Reopening Safari solves the problem only for a short time, as does a Restart.
I have recently (after major iTunes and kernel panic issues) run DiskWarrior, replaced and tested additional RAM, and repaired disk permissions to no avail.
Any ideas?

Deleted the three files suggested - now, on opening Safari I cannot expand the Safari page to fill the screen width (after a certain point dragging across from the corner, the header bar disappears and the page will not expand further).
I still have exactly the same problem with opening new windows - they appear in the list, but I can't view them.

How do I sync my phone to transfer itune purchases? Plugging in doesn't do it and "my device" is not visible in the itunes page line-up.

how do I sync my phone to transfer new itune purchases? plugging in does nothing and "my device" does not show in the lineup on the left side of the itunes page. thanks.

If your phone is not recognized by iTunes, look at the appropriate support document for a possible solution.
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows, http://support.apple.com/kb/TS1538
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Mac OS X, http://support.apple.com/kb/TS1591

CRM materials extended and in R/3 - not visible in CRM

Materials extended in masterfile maintainence, materials showing in PRD in R/3.
Products not visible in the CRM online system using /ncommpr01 to view the materials.
Any help on this issue would be most apprectiated.

Hi , I went into transaction /nsmw01 and there are bdocs there on the date in question that have a bdoc validation error for each material. Bdoc type - PRODUCT_MAT.
The bdocs state is E04. The flow context description is mBDoc Validate.The flow context is MI0
The DDIC type of extension part of BDoc is: COMT_PROD_MATERIAL_BDOC_TAB
In relation to these bdocs that have the validation error, how would I go about getting eradicating this issue, and getting the materials into CRM.
The materials are visible in R/3 production but now in CRM at the moment.
Any further help would be most appreciated.

Piece List and Object list are not moving through transports

Hi All,
I have created the Piece List and Object list for Language translation in Development system and saved them in transport.
When i moved this in Quality system then nothing is showing there.
I have checked the Log of transport movement,everything is showing OK there.
Please suggest me the way to solve this issue.

Hi
let me explain in Points
1
error messages about logs not found during the transport.
This is usually caused by incorrect maintenance of the setting for the transport directory. Check in particular the parameters DIR_TRANS and TRANSDIR by referring to the advice given in note 556734, section "What do I need to consider when setting up the transport?".
2
An import supposedly has an error, but cannot find an error in the log files.
This is usually due to the order-independent logs. In the order-independent steps, DDIC objects of other requests may also be edited. For example, the request to adjust a table remains for so long in the internal transport tables and is therefore also processed during a subsequent transport until the adjustment was successfully completed. An error can then be displayed for the subsequent request although its objects were all imported without any errors. Explanatory notes for this are 413993, 512493, 407116 and 330378. After every import, the order-independent logs should therefore also be checked.
If the system refers to canceled RDD* jobs, check the job log via SM37 and via ST22 the short dumps and via SM21 the syslog of the system.
Hope all my inputs helps you
santosh

I have window xp professional and this browser will not open. I have removed it and downloaded it again and still it won't open.

I think an older version of Morilla Firefox in order for this work on my computer.

Right.
"Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears"
And I'd close all of the running Apps (double tap on the home button, press and hold app then tap red - sign in corner of listed apps). This probably seems very elementary, but like I indicated the issue you are describing seems so much like a memory issue.....if this isn't it, the issue you describe has me scratching my head
BTW, you don't have any issues with the touch screen, correct? It seems to be functioning normally except for the issue you describe?

Address Book window not visible

Have a strange problem with Address Book on a friend's new 27-inch iMac.
When Address Book is launched, the menus appear at the top of the screen but there is no window. Some menu items are greyed out but some are visible. Have tried various things:
Window > Address Book does not make the window appear. Repaired permissions, removed .plist files.
Can view the Address Book entries from the Address Book button in Mail.
Any ideas, anyone?

Start by backing up the user/Library/Application Support/Addressbook folder.
In that folder is a file called AddressBook-v22.abcddb. Delete that and start address book. That will delete the index and have AB recreate it. I don't know if that is the problem, but may be.
On a different tack, download and install the 10.6.3 combo updater. It may fix what is broken. However, most problems are data-related, not the application itself.
Can you log into a different user and open Address Book? Just create a new user account for testing, if there isn't another. I keep one just for checking stuff like this. Checking in a different user will tell us if it is a system-wide problem, or just that one particular user.

Properties window and Object Browser window not visible anywhere

Similar Messages

Maybe you are looking for