Properties window - Engage 2008
I inadvertently (don't know how) changed the location of the properties window from the right hand side of the screen to the top. How do I change it back to the right of the screen?
Thanks!
Hey,
I it´s easy Click on the top of the properties window and drag it down and you will see the navigating bars, so drag it to the bar on the right hand side and relese it.. There you go man
Jan
Similar Messages
-
Properties window and Object Browser window not visible anywhere
Although "Properties" and "Object Browser" are ticked in the View menu, the windows do not appear anywhere on the screen (yes I have looked everywhere). The "Components" window appears as normal. It does not matter what Xcelsisus file I am working in, as the problem is the same even when I first launch Xcelsius. I was running Xcelsius Engage 2008 with Office 2003 and did not have this problem. I recently upgraded to Office 2007 and now I have this problem. I run the same software on my notebook without any problem. Very frustrating. Any ideas on how to fix the problem? Thanks JR
Hi JR,
This should be something simple. Please use the shortcut to get focus to :Object Browser" by pressing Ctrl+4, If you are unable to spot the object brower, it must be minimised eighter of the corner of Xcelsius window.
Use "Restore Dwon" button which will be at the right top corner (before Close Button) so that your Xcelsius window become smaller size. Try to find the border of the working window and make it smaller in all 4 sides using mouse. You will find the Object Browser, Property window somewhere.
Please revert if this does not helps you.
With best wishes
BaaRaa. -
Dear All,
I hope someone can help me here with EPM 11.1.2.1 installation problem on my notebook - Windows Server 2008 R2 x65, 8 GB RAM, running SQLServer 2008 Express.
I installed Hyperion Foundation. The installation and configuration went through successfully.
I am facing two problems:
Problem 1
When I try to access the workspace through the URL http://hostname:19000/workspace/index.jsp, I get error:
Quote
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
End-quote
Problem 2
Also, the service "Hyperion EPM Server" service not able to start. When I try to start, I get error message:
Quote
The Hyperion EPMA Server service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.
End-quote
I tried checking everything but can't seem to figure out what's going wrong.
I have uploaded (1) EPM Config Manager screenshot (2) EPM System diagnostic report (3) EPM Registry editor output and (4) system services listing at
http://www.mediafire.com/?pr9l1v99w4d9u4r,c3vggxeibqkxbo2,lyzclu2aggbn8qh,8kur9gxal5b361z
It would be very grateful if someone can have a look and help me.
Many thanks in advance for any help / pointers / suggestions.
- NeilHi Pablo,
Thanks to your suggestion for database, problem #2 seem to be resolved. I am now able to start EPMA Service.
Re: Problem 1
a) Log for C:\Oracle\Middleware\user_projects\epmsystem1\diagnostics\logs\services\HyS9FoundationServices-sysout is as below
-----<start>--------
<Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Feb 15, 2012 4:04:47 AM > <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Feb 15, 2012 4:04:47 AM > <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
<Feb 15, 2012 4:04:48 AM > <Info> <Security> <BEA-090065> <Getting boot identity from user.>
Enter username to boot WebLogic server:
------<end>-----
I am intrigued by the last line "Enter username to boot WebLogic server:" - is there anything wrong going here?
Log for C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0 is as below:
-----<start>--------
####<Feb 15, 2012 12:49:49 AM <Info> <WebLogicServer> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589459> <BEA-000000> <WebLogic Server "FoundationServices0" version:
WebLogic Server 10.3.4.0 Fri Dec 17 20:47:33 PST 2010 1384255 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
####<Feb 15, 2012 12:49:49 AM <Notice> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589568> <BEA-170019> <The server log file C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\logs\FoundationServices0.log is opened. All server side log events will be written to this file.>
####<Feb 15, 2012 12:49:49 AM <Info> <Log Management> <RCPL02> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1329324589584> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
####<Feb 15, 2012 12:49:49 AM <Info> <Diagnostics> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324589631> <BEA-320001> <The ServerDebug service initialized successfully.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "t3s" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "http" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "https" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiop" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "iiops" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldap" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "ldaps" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594904> <BEA-002622> <The protocol "cluster" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "clusters" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "snmp" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002622> <The protocol "admin" is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594919> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
Listen Address :28080
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
####<Feb 15, 2012 12:49:54 AM <Info> <RJVM> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594950> <BEA-000570> <Network Configuration for Channel "FoundationServices0"
Listen Address :28443 (SSL)
Public Address N/A
Http Enabled true
Tunneling Enabled false
Outbound Enabled false
Admin Traffic Enabled true>
####<Feb 15, 2012 12:49:54 AM <Info> <Server> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324594982> <BEA-002609> <Channel Service initialized.>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595013> <BEA-000406> <NTSocketMuxer was built on Jan 24 2006 20:40:35
>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000436> <Allocating 4 reader threads.>
####<Feb 15, 2012 12:49:55 AM <Info> <Socket> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595075> <BEA-000446> <Native IO Enabled.>
####<Feb 15, 2012 12:49:55 AM <Info> <IIOP> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324595216> <BEA-002014> <IIOP subsystem enabled.>
####<Feb 15, 2012 12:49:59 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324599818> <BEA-090894> <Successfully loaded the OPSS Policy Provider using oracle.security.jps.internal.policystore.JavaPolicyProvider.>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600286> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600442> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_9V5rIdcvntKDauQNwFIW41HchnU=>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600722> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLAuthorizermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:00 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324600738> <BEA-090074> <Initializing Authorizer provider using LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601050> <BEA-090075> <The Authorizer provider has had its LDIF information loaded from: C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\XACMLAuthorizerInit.ldift>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\DefaultCredentialMappermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601315> <BEA-090827> <LDIF template file C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DefaultCredentialMapperInit.ldift was empty. The WebLogic provider CredentialMapper has been bootstrapped but has not been initialized with any LDIF data.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-000000> <BootStrapServiceImpl.loadLDIFTemplate - Did not find C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\data\ldap\XACMLRoleMappermyrealmInit.initialized, will load full LDIFT.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601331> <BEA-090074> <Initializing RoleMapper provider using LDIF template file C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift.>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601346> <BEA-090075> <The RoleMapper provider has had its LDIF information loaded from: C:\Oracle\Middleware\user_projects\domains\EPMSystem\security\XACMLRoleMapperInit.ldift>
####<Feb 15, 2012 12:50:01 AM <Info> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090093> <No pre-WLS 8.1 Keystore providers are configured for server FoundationServices0 for security realm myrealm.>
####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601565> <BEA-090082> <Security initializing using security realm myrealm.>
####<Feb 15, 2012 12:50:01 AM <Notice> <Security> <RCPL02> <FoundationServices0> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1329324601658> <BEA-090083> <Storing boot identity in the file: C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\boot.properties>
------<end>----- -
Hi,
Windows 7 or Windows Server 2008 R2 domain join displays error "Changing the Primary Domain DNS name of this computer to "" failed...."
DC:windows Server 2008 R2
Domain functional level:Windows Server 2003
When Winxp join domain, have no this error message.
I checked http://support.microsoft.com/kb/2018583?wa=wsignin1.0 does't work.
There have 3 suggestion in this article:
1.The "Disable NetBIOS over TCP/IP" checkbox has been disabled in the IPv4 properties of the computer being joined.
Doesnt's work.
2.Connectivity over UDP port 137 is blocked between client and the helper DC servicing the join operation in the target domain.
On my DC, I run netstat -an, reslut as below:
UDP 192.168.20.3:137 *:*
3.The TCP/IPv4 protocol has been disabled so that the client being joined or the DC in the destination domain targeted by the LDAP BIND is running TCP/IPv6 only.
We are not using IPV6.
This server recently updated from Windows Server 2003 to Windows Server 2008 R2. Before upgrade, when Win7 and Win2008 join this domain, also have the same error message.
Please help to check this issue.
Thank you very much.
BR
Guo YingHuiHi Guo Ying,
I have faced this critical error which makes over-writes the host names in the domain when you join.
For example: Already you had a host name called as PC.domain.com in the domain.com Domain.
When you try to add the another host name called as PC in the domain.com Domain, it doesn't give you the duplicate name error on the network it does over-write the existing host name called as PC.domain.com & it will add the new host name into the domain.
Host name which got over-written will get removed from the domain. I faced this issue in my project. My DPM host name got removed from the Domain & new host name got joined into the domain which halted my backups for one day.
Final Resolution is as follows:
You need to start the dns console on the DC & drop down the domain name.
Select the _msdcs when you click on _msdcs it will show the Name Server's list on the right hand side.
You need to add the Domain Naming Master under the _msdcs or add all the domain controllers which you had.
After you add the Name server's try joining the PC OR Laptop to the domain which is successfully joins it.
Regards
Anand S
Thanks & Regards Anand Sunka MCSA+CCNA+MCTS -
Windows Server 2008 R2 x64 - Windows Update Errors...
Hello,
I've a windows 2008 R2 Enterprise SP1 server that I've applied Windows updates to this evening. A large number were successful, however there are 13 that will not install and keep on failing. I've run sfc/scannow which found and repaired some
errors - restarted server - no difference.
Please see windowsupdate.log output below (apologies for the length). I've tried installing individual updates from the 13 but it makes no difference and the errors are just the same. It seems to be the same error for each update although unfortunately doesn't
mean much to me. Any assistance would be greatly appreciated.
Thanks gents.
2014-05-13 20:45:13:189 900 f84 AU AU received approval from Ux for 13 updates
2014-05-13 20:45:13:189 900 f84 AU AU setting pending client directive to 'Progress Ux'
2014-05-13 20:45:13:219 900 126c AU BeginInteractiveInstall invoked for Download
2014-05-13 20:45:13:219 900 126c AU Auto-approving update for download, updateId = {1B127611-D28E-4167-A1DC-243A51BC528F}.203, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:219 900 126c AU Auto-approving update for download, updateId = {C750962E-9D5E-45CE-9967-AE2D67115966}.202, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:219 900 126c AU Auto-approving update for download, updateId = {332AA342-7AC4-4FB4-9C27-C2C9F4EAE6C0}.201, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:219 900 126c AU Auto-approving update for download, updateId = {3732354D-3DAE-4E71-B82C-61A12C300F72}.201, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:219 900 126c AU Auto-approving update for download, updateId = {A0689F68-807A-4D39-8112-8F931F8D0D85}.202, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:220 900 126c AU Auto-approving update for download, updateId = {88126772-A2FD-490A-8C84-787E94DAFE65}.201, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:220 900 126c AU Auto-approving update for download, updateId = {DFAA6388-FE05-49D7-A410-71B92D1C1B37}.202, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:220 900 126c AU Auto-approving update for download, updateId = {E2186FA0-D10C-4E1D-9619-A4FEB1ECF00B}.201, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:220 900 126c AU Auto-approving update for download, updateId = {FA04F2A3-4DB5-4903-A08C-ADDFCF93EE28}.201, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:220 900 126c AU Auto-approving update for download, updateId = {7E8ACCAD-2892-4F2D-9549-1FF8BE44AAD1}.203, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:220 900 126c AU Auto-approving update for download, updateId = {99C920B7-65AB-4ACD-A4AD-C4F522E4D7A9}.201, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:220 900 126c AU Auto-approving update for download, updateId = {EDE986B7-03CE-4B0C-8891-AF09113CB0DB}.200, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:220 900 126c AU Auto-approving update for download, updateId = {338B46CC-C71E-4294-A9D3-DF943FFEF642}.201, ForUx=1, IsOwnerUx=1, HasDeadline=0, IsMinor=0
2014-05-13 20:45:13:220 900 126c AU Auto-approved 13 update(s) for download (for Ux)
2014-05-13 20:45:13:220 900 126c AU UpdateDownloadProperties: 0 download(s) are still in progress.
2014-05-13 20:45:13:220 900 126c AU #############
2014-05-13 20:45:13:220 900 126c AU ## START ## AU: Download updates
2014-05-13 20:45:13:220 900 126c AU #########
2014-05-13 20:45:13:220 900 126c AU # Approved updates = 13
2014-05-13 20:45:13:222 900 126c AU AU initiated download, updateId = {1B127611-D28E-4167-A1DC-243A51BC528F}.203, callId = {AE497400-C1FA-434C-96A2-442420AD7155}
2014-05-13 20:45:13:225 900 1384 DnldMgr *************
2014-05-13 20:45:13:225 900 126c AU AU initiated download, updateId = {C750962E-9D5E-45CE-9967-AE2D67115966}.202, callId = {10C2CAD4-1000-4CFF-B414-F762841CC51D}
2014-05-13 20:45:13:225 900 1384 DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdatesWuApp]
2014-05-13 20:45:13:225 900 1384 DnldMgr *********
2014-05-13 20:45:13:226 900 1384 DnldMgr * Call ID = {AE497400-C1FA-434C-96A2-442420AD7155}
2014-05-13 20:45:13:226 900 1384 DnldMgr * Priority = 3, Interactive = 1, Owner is system = 1, Explicit proxy = 0, Proxy session id = 2, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-05-13 20:45:13:226 900 1384 DnldMgr * Updates to download = 1
2014-05-13 20:45:13:226 900 1384 Agent * Title = Security Update for Windows Server 2008 R2 x64 Edition (KB2868626)
2014-05-13 20:45:13:226 900 1384 Agent * UpdateId = {1B127611-D28E-4167-A1DC-243A51BC528F}.203
2014-05-13 20:45:13:226 900 1384 Agent * Bundles 1 updates:
2014-05-13 20:45:13:226 900 1384 Agent * {7E051B49-3C92-45B0-9138-97BEDCE52225}.201
2014-05-13 20:45:13:229 900 1384 DnldMgr *********** DnldMgr: New download job [UpdateId = {7E051B49-3C92-45B0-9138-97BEDCE52225}.201] ***********
2014-05-13 20:45:13:229 900 1384 DnldMgr * Queueing update for download handler request generation.
2014-05-13 20:45:13:229 900 1384 DnldMgr Generating download request for update {7E051B49-3C92-45B0-9138-97BEDCE52225}.201
2014-05-13 20:45:13:239 900 1384 Handler Generating request for CBS update 7E051B49-3C92-45B0-9138-97BEDCE52225 in sandbox C:\Windows\SoftwareDistribution\Download\b29165aeaa9b7c6358a11fe608ad59db
2014-05-13 20:45:13:239 900 1384 Handler Selected payload type is ptExpress
2014-05-13 20:45:13:240 900 126c AU AU initiated download, updateId = {332AA342-7AC4-4FB4-9C27-C2C9F4EAE6C0}.201, callId = {C6D9C785-32FE-4AD7-9DEB-C7105A3C1262}
2014-05-13 20:45:13:240 900 1384 Handler UH: DpxRestoreJob returned 0x80070002
2014-05-13 20:45:13:240 900 1384 Handler Detected download state is dsHavePackage
2014-05-13 20:45:13:243 900 126c AU AU initiated download, updateId = {3732354D-3DAE-4E71-B82C-61A12C300F72}.201, callId = {F055F0F1-9AE5-433A-A2BD-03D142912DA1}
2014-05-13 20:45:13:247 900 126c AU AU initiated download, updateId = {A0689F68-807A-4D39-8112-8F931F8D0D85}.202, callId = {326F2698-90E8-421E-B5B1-2A64797E7842}
2014-05-13 20:45:13:250 900 126c AU AU initiated download, updateId = {88126772-A2FD-490A-8C84-787E94DAFE65}.201, callId = {065E2D23-EF67-47E1-8C87-440BD7137483}
2014-05-13 20:45:13:253 900 126c AU AU initiated download, updateId = {DFAA6388-FE05-49D7-A410-71B92D1C1B37}.202, callId = {606C3C01-D996-4932-A142-30A8B192F2C0}
2014-05-13 20:45:13:256 900 126c AU AU initiated download, updateId = {E2186FA0-D10C-4E1D-9619-A4FEB1ECF00B}.201, callId = {4805FBCE-4AB1-4751-A8AE-0847B69EA142}
2014-05-13 20:45:13:259 900 126c AU AU initiated download, updateId = {FA04F2A3-4DB5-4903-A08C-ADDFCF93EE28}.201, callId = {04DDA2A9-B6C8-47F0-BE70-B0F50D7A6BA2}
2014-05-13 20:45:13:262 900 126c AU AU initiated download, updateId = {7E8ACCAD-2892-4F2D-9549-1FF8BE44AAD1}.203, callId = {E0241A77-09F1-4498-97A6-DDD57483954E}
2014-05-13 20:45:13:266 900 126c AU AU initiated download, updateId = {99C920B7-65AB-4ACD-A4AD-C4F522E4D7A9}.201, callId = {52A53948-0632-4E15-A14A-841FB5C95F61}
2014-05-13 20:45:13:269 900 126c AU AU initiated download, updateId = {EDE986B7-03CE-4B0C-8891-AF09113CB0DB}.200, callId = {AB354496-CB3D-4A07-9F3C-1069C43C61E1}
2014-05-13 20:45:13:272 900 126c AU AU initiated download, updateId = {338B46CC-C71E-4294-A9D3-DF943FFEF642}.201, callId = {E7AB48E8-5603-48BD-A051-1CCA7DFF4652}
2014-05-13 20:45:13:272 900 126c AU # Pending download calls = 13
2014-05-13 20:45:13:272 900 126c AU <<## SUBMITTED ## AU: Download updates
2014-05-13 20:45:13:279 900 f84 AU Getting featured update notifications. fIncludeDismissed = true
2014-05-13 20:45:13:279 900 f84 AU No featured updates available.
2014-05-13 20:45:17:040 900 f84 Handler FATAL: CBS called Error with 0x80073712,
2014-05-13 20:45:17:041 900 1384 Handler FATAL: UH: 0x80073712: Async stage operation failed in CUHCbsHandler::StageCbsPackage
2014-05-13 20:45:17:056 900 1384 Handler FATAL: Request generation for CBS update complete with hr=0x80073712 and pfResetSandbox=0
2014-05-13 20:45:17:056 900 1384 Handler FATAL: Error source is 106.
2014-05-13 20:45:17:056 900 1384 DnldMgr FATAL: DM:CAgentDownloadManager::GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x80073712.
2014-05-13 20:45:17:056 900 1384 DnldMgr Error 0x80073712 occurred while downloading update; notifying dependent calls.
2014-05-13 20:45:17:254 900 1384 Agent *********
2014-05-13 20:45:17:254 900 12d0 AU >>## RESUMED ## AU: Download update [UpdateId = {1B127611-D28E-4167-A1DC-243A51BC528F}]
2014-05-13 20:45:17:254 900 1384 Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdatesWuApp]
2014-05-13 20:45:17:254 900 12d0 AU # WARNING: Download failed, error = 0x80073712
2014-05-13 20:45:17:254 900 1384 Agent *************
2014-05-13 20:45:17:259 900 1384 DnldMgr *************
2014-05-13 20:45:17:259 900 1384 DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdatesWuApp]
2014-05-13 20:45:17:259 900 1384 DnldMgr *********
2014-05-13 20:45:17:259 900 1384 DnldMgr * Call ID = {10C2CAD4-1000-4CFF-B414-F762841CC51D}
2014-05-13 20:45:17:259 900 1384 DnldMgr * Priority = 3, Interactive = 1, Owner is system = 1, Explicit proxy = 0, Proxy session id = 2, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-05-13 20:45:17:259 900 1384 DnldMgr * Updates to download = 1
2014-05-13 20:45:17:259 900 1384 Agent * Title = Security Update for Windows Server 2008 R2 x64 Edition (KB2872339)
2014-05-13 20:45:17:259 900 1384 Agent * UpdateId = {C750962E-9D5E-45CE-9967-AE2D67115966}.202
2014-05-13 20:45:17:259 900 1384 Agent * Bundles 2 updates:
2014-05-13 20:45:17:259 900 1384 Agent * {45AFABD9-B938-457D-95EA-A32C2FA19D37}.202
2014-05-13 20:45:17:259 900 1384 Agent * {1E81D165-A493-4813-8526-04D8F35C37D8}.202
2014-05-13 20:45:17:262 900 1384 DnldMgr *********** DnldMgr: New download job [UpdateId = {45AFABD9-B938-457D-95EA-A32C2FA19D37}.202] ***********
2014-05-13 20:45:17:263 900 1384 DnldMgr * All files for update were already downloaded and are valid.
2014-05-13 20:45:17:263 900 1384 DnldMgr *********** DnldMgr: New download job [UpdateId = {1E81D165-A493-4813-8526-04D8F35C37D8}.202] ***********
2014-05-13 20:45:17:263 900 1384 DnldMgr * Queueing update for download handler request generation.
2014-05-13 20:45:17:263 900 1384 DnldMgr Generating download request for update {1E81D165-A493-4813-8526-04D8F35C37D8}.202
2014-05-13 20:45:17:269 900 1384 Handler Generating request for CBS update 1E81D165-A493-4813-8526-04D8F35C37D8 in sandbox C:\Windows\SoftwareDistribution\Download\371b4bee540898fe91c5fa6958cf73cc
2014-05-13 20:45:17:270 900 1384 Handler Selected payload type is ptExpress
2014-05-13 20:45:17:271 900 1384 Handler UH: DpxRestoreJob returned 0x80070002
2014-05-13 20:45:17:271 900 1384 Handler Detected download state is dsHavePackage
2014-05-13 20:45:18:265 900 f84 Handler FATAL: CBS called Error with 0x80073712,
2014-05-13 20:45:18:266 900 1384 Handler FATAL: UH: 0x80073712: Async stage operation failed in CUHCbsHandler::StageCbsPackage
2014-05-13 20:45:18:267 900 1384 Handler FATAL: Request generation for CBS update complete with hr=0x80073712 and pfResetSandbox=0
2014-05-13 20:45:18:267 900 1384 Handler FATAL: Error source is 106.
2014-05-13 20:45:18:267 900 1384 DnldMgr FATAL: DM:CAgentDownloadManager::GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x80073712.
2014-05-13 20:45:18:267 900 1384 DnldMgr Error 0x80073712 occurred while downloading update; notifying dependent calls.
2014-05-13 20:45:18:307 900 1384 Agent *********
2014-05-13 20:45:18:307 900 12d0 AU >>## RESUMED ## AU: Download update [UpdateId = {C750962E-9D5E-45CE-9967-AE2D67115966}]
2014-05-13 20:45:18:307 900 1384 Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdatesWuApp]
2014-05-13 20:45:18:307 900 12d0 AU # WARNING: Download failed, error = 0x80073712
2014-05-13 20:45:18:307 900 1384 Agent *************
2014-05-13 20:45:18:310 900 1384 DnldMgr *************
2014-05-13 20:45:18:310 900 1384 DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdatesWuApp]
2014-05-13 20:45:18:310 900 1384 DnldMgr *********
2014-05-13 20:45:18:310 900 1384 DnldMgr * Call ID = {C6D9C785-32FE-4AD7-9DEB-C7105A3C1262}
2014-05-13 20:45:18:310 900 1384 DnldMgr * Priority = 3, Interactive = 1, Owner is system = 1, Explicit proxy = 0, Proxy session id = 2, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-05-13 20:45:18:310 900 1384 DnldMgr * Updates to download = 1
2014-05-13 20:45:18:310 900 1384 Agent * Title = Security Update for Windows Server 2008 R2 x64 Edition (KB2839894)
2014-05-13 20:45:18:310 900 1384 Agent * UpdateId = {332AA342-7AC4-4FB4-9C27-C2C9F4EAE6C0}.201
2014-05-13 20:45:18:310 900 1384 Agent * Bundles 1 updates:
2014-05-13 20:45:18:310 900 1384 Agent * {B4DB0FFF-81FE-4D1D-BF01-D59B829303FC}.201
2014-05-13 20:45:18:314 900 1384 DnldMgr *********** DnldMgr: New download job [UpdateId = {B4DB0FFF-81FE-4D1D-BF01-D59B829303FC}.201] ***********
2014-05-13 20:45:18:314 900 1384 DnldMgr * Queueing update for download handler request generation.
2014-05-13 20:45:18:314 900 1384 DnldMgr Generating download request for update {B4DB0FFF-81FE-4D1D-BF01-D59B829303FC}.201
2014-05-13 20:45:18:321 900 1384 Handler Generating request for CBS update B4DB0FFF-81FE-4D1D-BF01-D59B829303FC in sandbox C:\Windows\SoftwareDistribution\Download\7d02b28581a54bc209cde32aa0661586
2014-05-13 20:45:18:321 900 1384 Handler Selected payload type is ptExpress
2014-05-13 20:45:18:322 900 1384 Handler UH: DpxRestoreJob returned 0x80070002
2014-05-13 20:45:18:322 900 1384 Handler Detected download state is dsHavePackage
2014-05-13 20:45:18:655 900 f84 Handler FATAL: CBS called Error with 0x80073712,
2014-05-13 20:45:18:655 900 1384 Handler FATAL: UH: 0x80073712: Async stage operation failed in CUHCbsHandler::StageCbsPackage
2014-05-13 20:45:18:656 900 1384 Handler FATAL: Request generation for CBS update complete with hr=0x80073712 and pfResetSandbox=0
2014-05-13 20:45:18:656 900 1384 Handler FATAL: Error source is 106.
2014-05-13 20:45:18:656 900 1384 DnldMgr FATAL: DM:CAgentDownloadManager::GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x80073712.
2014-05-13 20:45:18:656 900 1384 DnldMgr Error 0x80073712 occurred while downloading update; notifying dependent calls.
2014-05-13 20:45:18:680 900 1384 Agent *********
2014-05-13 20:45:18:680 900 12d0 AU >>## RESUMED ## AU: Download update [UpdateId = {332AA342-7AC4-4FB4-9C27-C2C9F4EAE6C0}]
2014-05-13 20:45:18:680 900 1384 Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdatesWuApp]
2014-05-13 20:45:18:680 900 12d0 AU # WARNING: Download failed, error = 0x80073712
2014-05-13 20:45:18:680 900 1384 Agent *************
2014-05-13 20:45:18:684 900 1384 DnldMgr *************
2014-05-13 20:45:18:684 900 1384 DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdatesWuApp]
2014-05-13 20:45:18:684 900 1384 DnldMgr *********
2014-05-13 20:45:18:684 900 1384 DnldMgr * Call ID = {F055F0F1-9AE5-433A-A2BD-03D142912DA1}
2014-05-13 20:45:18:684 900 1384 DnldMgr * Priority = 3, Interactive = 1, Owner is system = 1, Explicit proxy = 0, Proxy session id = 2, ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}
2014-05-13 20:45:18:684 900 1384 DnldMgr * Updates to download = 1
2014-05-13 20:45:18:684 900 1384 Agent * Title = Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2742599)
2014-05-13 20:45:18:684 900 1384 Agent * UpdateId = {3732354D-3DAE-4E71-B82C-61A12C300F72}.201
2014-05-13 20:45:18:684 900 1384 Agent * Bundles 1 updates:
2014-05-13 20:45:18:684 900 1384 Agent * {D7F10B98-0B4D-402C-B0A5-FF2135F8620C}.201
2014-05-13 20:45:18:687 900 1384 DnldMgr *********** DnldMgr: New download job [UpdateId = {D7F10B98-0B4D-402C-B0A5-FF2135F8620C}.201] ***********
2014-05-13 20:45:18:687 900 1384 DnldMgr * Queueing update for download handler request generation.
2014-05-13 20:45:18:687 900 1384 DnldMgr Generating download request for update {D7F10B98-0B4D-402C-B0A5-FF2135F8620C}.201
2014-05-13 20:45:19:325 900 1384 Handler Generating request for CBS update D7F10B98-0B4D-402C-B0A5-FF2135F8620C in sandbox C:\Windows\SoftwareDistribution\Download\44b836e953f10e780a421d6fb4995a79
2014-05-13 20:45:19:325 900 1384 Handler Selected payload type is ptExpress
2014-05-13 20:45:19:326 900 1384 Handler UH: DpxRestoreJob returned 0x80070002
2014-05-13 20:45:19:326 900 1384 Handler Detected download stat
M TiplerUnfortunately that made no difference - the updates still won't install and the checksur.log file still contains the same data...
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.22471
Package Version 25.0
2014-05-14 08:15
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
(f) CSI Missing Winning Component Key 0x00000000 amd64_microsoft-windows-csrsrv_31bf3856ad364e35_6.1.7601.18113_none_27ac1dcabbfe37b8
(f) CSI Missing Winning Component Key 0x00000000 amd64_microsoft-windows-smss_31bf3856ad364e35_6.1.7601.18113_none_0a5f8ec22fd235a9
(f) CSI Missing Winning Component Key 0x00000000 wow64_microsoft-windows-smss_31bf3856ad364e35_6.1.7601.18113_none_14b439146432f7a4
(f) CSI Missing Winning Component Key 0x00000000 wow64_microsoft-windows-csrsrv_31bf3856ad364e35_6.1.7601.18113_none_3200c81cf05ef9b3
Summary:
Seconds executed: 446
Found 4 errors
CSI Missing Winning Component Key Total count: 4
(w) Unable to get system disk properties 0x0000045D IOCTL_STORAGE_QUERY_PROPERTY Disk Cache
Looks like a repair install is required. I'll keep you updated.
M Tipler -
Windows Server 2008 R2 only detect USB storage drives if I restart the system
Hi, I have a Windows Server 2008 R2 with an weird behaviour. I cannot connect any USB drive (not USB external hard disk neither pendrives). Windows device manager detects the device as
Mass Storage Device, but with a yellow exclamation sign. The exact error code is:
The device cannot start.
However, if I restart the machine keeping the USB disk plugged, the hard disk (or pendrive) is correctly detected and usable.
I've tried:
Update mass storage driver.
Review HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\usbstor "Start"
and is 3 (I think is right)
I've tried with different usb hard disks that are working in other PCs.
I've tried with large (>1TB) disks and small (8GB) pendrives.
I've tried all available USB ports, front and back, with same behaviour.
Always I get a yellow exclamation (Device cannot start) and if I restart the computer the device is working perfectly.
Can someone help me?
Thanks in advance
Edit: Here is the log of connecting a Kingstone USB 8GB pendrive
>>> [Device Install (Hardware initiated) - USB\VID_0930&PID_6544\C860008863DBCE801A0B24B4]
>>> Section start 2015/01/09 09:35:49.342
ump: Creating Install Process: DrvInst.exe 09:35:49.498
ndv: Retrieving device info...
ndv: Setting device parameters...
ndv: Searching Driver Store and Device Path...
dvi: {Build Driver List} 09:35:49.966
dvi: Searching for hardware ID(s):
dvi: usb\vid_0930&pid_6544&rev_0100
dvi: usb\vid_0930&pid_6544
dvi: Searching for compatible ID(s):
dvi: usb\class_08&subclass_06&prot_50
dvi: usb\class_08&subclass_06
dvi: usb\class_08
cpy: Policy is set to make all digital signatures equal.
dvi: Enumerating INFs from path list 'C:\Windows\inf'
inf: Opened PNF: 'C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf' ([strings.0c0a])
dvi: Created Driver Node:
dvi: HardwareID - USB\Class_08&SubClass_06&Prot_50
dvi: InfName - C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf
dvi: DevDesc - Dispositivo de almacenamiento USB
dvi: DrvDesc - Dispositivo de almacenamiento USB
dvi: Provider - Microsoft
dvi: Mfg - Dispositivo de almacenamiento USB compatible
dvi: ModelsSec - Generic.NTamd64
dvi: InstallSec - USBSTOR_BULK
dvi: ActualSec - USBSTOR_BULK.NT
dvi: Rank - 0x00ff2000
dvi: Signer - Microsoft Windows
dvi: Signer Score - INBOX
dvi: DrvDate - 06/21/2006
dvi: Version - 6.1.7601.17577
inf: Searched 1 potential matches in published INF directory
inf: Searched 36 INFs in directory: 'C:\Windows\inf'
dvi: {Build Driver List - exit(0x00000000)} 09:35:51.900
ndv: Selecting best match from Driver Store (including Device Path)...
dvi: {DIF_SELECTBESTCOMPATDRV} 09:35:51.900
dvi: No class installer for 'DataTraveler 2.0'
dvi: No CoInstallers found
dvi: Default installer: Enter 09:35:51.900
dvi: {Select Best Driver}
dvi: Selected driver installs from section [USBSTOR_BULK] in 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf'.
dvi: Class GUID of device changed to: {36fc9e60-c465-11cf-8056-444553540000}.
dvi: Set selected driver complete.
dvi: Selected:
dvi: Description - [Dispositivo de almacenamiento USB]
dvi: InfFile - [c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf]
dvi: Section - [USBSTOR_BULK]
dvi: Signer - [Microsoft Windows]
dvi: Rank - [0x00ff2000]
dvi: {Select Best Driver - exit(0x00000000)}
dvi: Default installer: Exit
dvi: {DIF_SELECTBESTCOMPATDRV - exit(0x00000000)} 09:35:51.916
inf: {SetupCopyOEMInf: C:\Windows\INF\usbstor.inf} 09:35:51.931
inf: Driver Store location: C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf
inf: Published Inf Path: C:\Windows\INF\usbstor.inf
inf: {SetupCopyOEMInf exit (0x00000050)} 09:35:51.931
dvi: Searching for hardware ID(s):
dvi: usb\vid_0930&pid_6544&rev_0100
dvi: usb\vid_0930&pid_6544
dvi: Searching for compatible ID(s):
dvi: usb\class_08&subclass_06&prot_50
dvi: usb\class_08&subclass_06
dvi: usb\class_08
inf: Opened PNF: 'C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf' ([strings.0c0a])
dvi: Selected driver installs from section [USBSTOR_BULK] in 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf'.
dvi: Class GUID of device changed to: {36fc9e60-c465-11cf-8056-444553540000}.
dvi: Set selected driver complete.
ndv: Driver selected, now performing install...
ndv: {Core Device Install} 09:35:51.947
inf: Opened PNF: 'C:\Windows\INF\usbstor.inf' ([strings.0c0a])
inf: Opened PNF: 'C:\Windows\INF\usbstor.inf' ([strings.0c0a])
dvi: {DIF_ALLOW_INSTALL} 09:35:52.259
dvi: No class installer for 'Dispositivo de almacenamiento USB'
dvi: No CoInstallers found
dvi: Default installer: Enter 09:35:52.259
dvi: Default installer: Exit
dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 09:35:52.259
ndv: Installing files...
dvi: {DIF_INSTALLDEVICEFILES} 09:35:52.306
dvi: No class installer for 'Dispositivo de almacenamiento USB'
dvi: Default installer: Enter 09:35:52.306
dvi: {Install FILES}
inf: Opened PNF: 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf' ([strings.0c0a])
inf: {Install Inf Section [USBSTOR_BULK.NT]}
inf: CopyFiles=USBSTOR.CopyList (usbstor.inf line 173)
flq: CopyFiles from an inbox inf.
cpy: Open PnpLockdownPolicy: Err=2. This is OK. Use LockDownPolicyDefault
flq: QueueSingleCopy...
flq: Inf : 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf'
flq: SourceInf: 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf'
flq: SourceSection: [sourcedisksfiles]
flq: Source root path based on SourceInf
flq: SourceRootPath: 'C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_amd64_neutral_26b33263a639795d'
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x09000000
flq: {FILE_QUEUE_COPY}
flq: CopyStyle - 0x09000000
flq: SourceRootPath - 'C:\Windows\System32\DriverStore\FileRepository\usbstor.inf_amd64_neutral_26b33263a639795d'
flq: SourceFilename - 'USBSTOR.SYS'
flq: TargetDirectory- 'C:\Windows\system32\drivers'
flq: TargetFilename - 'USBSTOR.SYS'
flq: SourceDesc - 'windows cd'
flq: {FILE_QUEUE_COPY exit(0x00000000)}
flq: {FILE_QUEUE_COPY exit(0x00000000)}
inf: {Install Inf Section [USBSTOR_BULK.NT] exit (0x00000000)}
dvi: Processing co-installer registration section [USBSTOR_BULK.NT.CoInstallers].
inf: {Install Inf Section [USBSTOR_BULK.NT.CoInstallers]}
inf: {Install Inf Section [USBSTOR_BULK.NT.CoInstallers] exit (0x00000000)}
dvi: Co-installers registered.
dvi: {Install INTERFACES}
dvi: Installing section [USBSTOR_BULK.NT.Interfaces]
dvi: {Install INTERFACES exit 00000000}
dvi: {Install FILES exit (0x00000000)}
dvi: Default installer: Exit
dvi: {DIF_INSTALLDEVICEFILES - exit(0x00000000)} 09:35:52.384
ndv: Pruning file queue...
dvi: {_SCAN_FILE_QUEUE}
flq: ScanQ flags=620
flq: SPQ_SCAN_PRUNE_COPY_QUEUE
flq: SPQ_SCAN_FILE_COMPARISON
flq: SPQ_SCAN_ACTIVATE_DRP
flq: ScanQ number of copy nodes=1
flq: File 'C:\Windows\system32\drivers\USBSTOR.SYS' pruned from copy.
sig: Using catalog 'C:\Windows\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\Package_3_for_KB982018~31bf3856ad364e35~amd64~~6.1.3.2.cat'.
cpy: DrpSetRegFileProt 'C:\Windows\system32\drivers\USBSTOR.SYS' Status=0 Class=Inbox Windows protected
flq: ScanQ action=200 DoPruning=32
flq: ScanQ end Validity flags=620 CopyNodes=0
dvi: {_SCAN_FILE_QUEUE exit(0, 0x00000000)}
ndv: Committing file queue...
flq: {_commit_file_queue}
flq: CommitQ DelNodes=0 RenNodes=0 CopyNodes=0
flq: CommitQ early exit: No nodes are queued
flq: {_commit_file_queue exit OK}
ndv: Registering CoInstallers...
dvi: {DIF_REGISTER_COINSTALLERS} 09:35:54.037
dvi: No class installer for 'Dispositivo de almacenamiento USB'
dvi: Default installer: Enter 09:35:54.069
inf: Opened PNF: 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf' ([strings.0c0a])
inf: {Install Inf Section [USBSTOR_BULK.NT.CoInstallers]}
inf: {Install Inf Section [USBSTOR_BULK.NT.CoInstallers] exit (0x00000000)}
dvi: Co-installers registered.
dvi: Default installer: Exit
dvi: {DIF_REGISTER_COINSTALLERS - exit(0x00000000)} 09:35:54.100
ndv: Installing interfaces...
dvi: {DIF_INSTALLINTERFACES} 09:35:54.100
dvi: No class installer for 'Dispositivo de almacenamiento USB'
dvi: No CoInstallers found
dvi: Default installer: Enter 09:35:54.100
dvi: {Install INTERFACES}
inf: Opened PNF: 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf' ([strings.0c0a])
dvi: Installing section [USBSTOR_BULK.NT.Interfaces]
dvi: {Install INTERFACES exit 00000000}
dvi: Default installer: Exit
dvi: {DIF_INSTALLINTERFACES - exit(0x00000000)} 09:35:54.100
ndv: Installing device...
dvi: {DIF_INSTALLDEVICE} 09:35:54.100
dvi: No class installer for 'Dispositivo de almacenamiento USB'
dvi: Default installer: Enter 09:35:54.100
dvi: {Install DEVICE}
inf: Opened PNF: 'c:\windows\system32\driverstore\filerepository\usbstor.inf_amd64_neutral_26b33263a639795d\usbstor.inf' ([strings.0c0a])
dvi: Processing Registry/Property directives...
inf: {Install Inf Section [USBSTOR_BULK.NT]}
inf: AddReg=USBSTOR_BULK.AddReg (usbstor.inf line 174)
inf: {Install Inf Section [USBSTOR_BULK.NT] exit (0x00000000)}
inf: {Install Inf Section [USBSTOR_BULK.NT.Hw]}
inf: Empty section
inf: {Install Inf Section [USBSTOR_BULK.NT.Hw] exit (0x00000000)}
dvi: {Writing Device Properties}
dvi: Provider name=Microsoft
dvi: DriverDate 06/21/2006
dvi: DriverVersion=6.1.7601.17577
dvi: Class name=USB
dvi: Manufacturer=Dispositivo de almacenamiento USB compatible
dvi: Matching DeviceID=usb\class_08&subclass_06&prot_50
dvi: Strong Name=usbstor.inf:Generic.NTamd64:USBSTOR_BULK:6.1.7601.17577:usb\class_08&subclass_06&prot_50
dvi: {Writing Device Properties - Complete}
inf: {Install Inf Section [USBSTOR_BULK.NT.Services]}
inf: Addservice=USBSTOR,0x00000002,USBSTOR.AddService (usbstor.inf line 177)
inf: ServiceType=1 (usbstor.inf line 234)
inf: StartType=3 (usbstor.inf line 235)
inf: ErrorControl=1 (usbstor.inf line 236)
inf: ServiceBinary=C:\Windows\system32\DRIVERS\USBSTOR.SYS (usbstor.inf line 237)
inf: DisplayName="Controlador de dispositivo de almacenamiento USB" (usbstor.inf line 233)
dvi: Add Service: Modified existing service 'USBSTOR'.
inf: AddReg=DeviceSpecific (usbstor.inf line 238)
inf: {Install Inf Section [USBSTOR_BULK.NT.Services] exit(0x00000000)}
dvi: Updated reflected section names for: usbstor.inf
dvi: {Install DEVICE exit (0x00000000)}
dvi: Writing common driver property settings.
dvi: DriverDescription=Dispositivo de almacenamiento USB
dvi: DeviceDisplayName=Dispositivo de almacenamiento USB
dvi: Install Device: Restarting device. 09:35:54.537
dvi: Install Device: Restarting device completed. 09:35:57.625
!!! dvi: Device not started: Device has problem: 0x0a: CM_PROB_FAILED_START.
dvi: Default installer: Exit
dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 09:35:57.641
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL} 09:35:57.641
dvi: No class installer for 'Dispositivo de almacenamiento USB'
dvi: Default installer: Enter 09:35:57.641
dvi: Default installer: Exit
dvi: {DIF_NEWDEVICEWIZARD_FINISHINSTALL - exit(0xe000020e)} 09:35:57.657
ndv: Device install status=0x00000000
ndv: Performing device install final cleanup...
! ndv: Queueing up error report since device has a PnP problem...
ndv: {Core Device Install - exit(0x00000000)} 09:35:59.201
ump: Server install process exited with code 0x00000000 09:35:59.232
<<< Section end 2015/01/09 09:35:59.279
<<< [Exit status: SUCCESS]I tried, but windows says that the best driver is alredy installed.
Now I've just tried to delete (uninstall) absolutly all devices under Universal Serial Bus Controller
(host controllers, root hubs, etc) into Device Manager, and then I've click on
Scan for hardware changes to force reinstall of all USB drivers. After that I've connected my USB external hard disk and has been correctly recognized and its working. However I don't know if when I'll restar the server and connect a new one usb device
it will continue working or not. I'll try later, because this is a production server.
I've tried for drivers into HP site to update or reinstall, but there isn't any driver for motherboard or USB controller. It's an HP ML350 G6. -
Hello,
I am a new IT Manager at this company and need assistance big time. Their environment looks as follows:
Server 1. Domain Controller Server (Windows Server 2008 R2 Standard) running active directory.
Server 2. Email Server (Windows Server 2008 R2 Standard) running Exchange Server 2010 .
* Note. No back ups to work with aside from whats mentioned below.
DC had a virus infection causing a lot of issues on the shared network drives 2 days ago locking up all the files with a crypto ransom virus. Running Avast suppressed the infection. Had to recover the file shares which luckily had a back up.
The issue is that the Exchange Server 2 post this lost connectivity with the AD Server 1. Exchange Server 2 when launching EMC could not launch the console stating the following:
"No Exchange servers are available in any Active Directory sites. You can’t connect to remote
Powershell on a computer that only has the Management Tools role installed."
Shortly after I found that it is possible the EMC launcher was corrupt and needed to be reinstalled following another blog post. I deleted the exchange management console.msc per instructions only to discover I couldnt relaunch it because there was
no way how. So I copied another msc file that happened to be on the DC Server 1 back to Exchange Server 2 and got it to launch again.
Another post said that it might be an issue with the Domain Account for the Computer, so to delete it in the AD Server 1 only to find that rejoining it from Exchange Server 2 using Computer>Properties> Chage Settings > Change is greyed out because
it is using the Certificate Authority Service.
I tried manually re-adding the computer in AD and modeling permissions after another server in group settings but no go. After this I was unable to login to the Exchange Server 2 with domain accounts but only local admin, receiving the following Alert:
"The Trust Relationship between this workstation and primary domain failed."
I tried running the Power Shell tools on Exchange Server 2 to rejoing and to reset passwords for domain accounts as noted in some other blogs but no luck as the Server 2 could not make the connection with Server1 or other errors it kept spitting out.
I also during the investigation found the DNS settings were all altered on both the Server 1 and Server 2 which I luckily was able to change back to original because of inventorying it in the beginning when I started.
I need help figuring out if I need to rejoin the Exchange Server 2 manually by disabling the Certificate Authority Service (or removing the CA as listed here:
https://social.technet.microsoft.com/Forums/exchange/en-US/fb23deab-0a12-410d-946c-517d5aea7fae/windows-server-2008-r2-with-certificate-authority-service-to-rejoin-domain?forum=winserversecurity
and getting exchange server to launch again. (Mind you I am relatively fresh to server managing) Please help E-Mail has been down for a whole day now!
MartyI recommend that you open a ticket with Microsoft Support before you break things more.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems." -
How do I run a non-server program on Windows Server 2008
I currently run a synchronization software application on my desktop in order to backup and synchronize over 600GB of data. I would like to install this on our server, which runs Windows Server 2008, but the software does not provide for installation
on this operating system. I continue to receive a message stating that the software may not run properly on Windows Server OS, but it does not allow me to bypass this message. Is there any way to create a partition or trick the software into thinking
that it is running on a different operating system or do I have to abandon Server 2008 and install a basic home operating system in order to run this software? Any help would be tremendously appreciated.
Thanks!
Hi,
According to your description, my understanding is that you want to install an software which is not supported by Windows Server.
Try to install this software in other compatibility mode:
1. Right-click the installation program and select properties.
2. Select Compatibility tab, select the checkbox Run this program in compatibility mode for.
3. try to use different OS to install this program.
Besides, you may right-click the installation program and select Run as administrator.
Above are my personal suggestion and just for your reference. If the problem still exit, I suggest you to connect the software‘s support/form for better help.
If you want to backup date, I suggest you to use Windows Server Backup, you may reference the link below for detailed information:
http://technet.microsoft.com/en-us/library/cc770757.aspx
Best Regards,
Eve Wang -
Windows server 2008 upgrade hangs at gathering files 0%
Hii,
While upgrading my Virtual Machine from Windows Server 2003 STD 32 Bit to Windows Server 2008 STD 32 Bit...it gets stuck at Gathering files 0%..
I have tried my changing the ISO file and also copied the setup files to one of my local drive then to having the same issue...
I have up graded almost 40 to 45 server but still didnt face such problem please suggest me any solution and i have also tried my googling the same but no luck...
And for info its an VM server in ESXI 5.5Hi
Might help:
Open Windows Explorer on the system you are trying to upgrade AFTER a failed attempt
There will be three new folders:
$UPGRADE.~OS
$WINDOWS.~BT
$WINDOWS.~LS
Go into the Security Properties and give "Everyone" Full Rights (on each folder)
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
I have two printers installed on Windows Server 2008 R2 (64-bit):
1. Samsung SCX-4521f
2. Samsung SCX-4300
There are two computers (Windows 7 Professional, 32-Bit) connected to this server that utilise these shared printers.
The drivers installed are as follows:
SCX-4x21_Win7_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7 3.04.96:03 Print Driver 11 Dec, 2009 12.37 MULTI LANGUAGE)
SCX-4300_Print.exe (Win 2000/XP/2003/Vista/2008/Win 7(32,64bit) 3.04.95:07 Print Driver Jan 19, 2011 53.07 MULTI LANGUAGE)
After printing documents for some time (within a 24 period) the printers no longer respond to print requests.
On the server opening "Control Panel\Hardware\Devices and Printers" shows the two printers with yellow exclamation marks.
The "SCX-4x21" printer shows the "Status" as "Needs troubleshooting" and "Printer: Error".
The "SCX-4300" printer shows the "Status" as "Needs troubleshooting".
Neither will print a test page.
Searching for new drivers automatically returns saying: "The best driver software for your device is already installed".
The error persists and nothing will print.
When double-clicking on the "SCX-4x21" printer (or going to "Control Panel\Hardware\Devices and Printers\Samsung SCX-4x21 Series") you see the following:
"Printer: Error" and "N document(s) in queue".
Clicking on either of these brings up the print queue and shows a document with the status of "Error - Printing".
As each job with an error is cancelled the next one attempts to print and also displays an error like the last.
Once all the jobs are cleared the printer information says "Printer: Ready".
Sending a "Print Test Page" sends the printer into an error state saying "Printer: Error".
With the "SCX-4300", sending a "Print Test Page" displays a bubble saying: "Toner Empty: Replace Toner".
However, I can't see any specific error messages.
How do I find out what exactly "Needs troubleshooting"?
Please can anyone advise further?The printer (SCX-4300) has stopped again.
Since it has been stopped I have done your recommendations:
Unticked the "Enable bidirectional support" option under the "Ports" tab in the printer properties.
Set the "Interactive Services Detection" to Automatic and started it.
Unfortunately the printer did not start printing, the print jobs did not restart or delete.
I decided to check the Operational logs that we enabled.
The first job I see goes like this:
Information: Rendering job 41.
Error: The print spooler failed to delete the file C:\Windows\system32\spool\PRINTERS\00041.SHD, error code 0x2. See the event user data for context information.
Information: The print job 41 was sent through the print processor SSE1MPC on printer Samsung SCX-4300 Series, driver Samsung SCX-4300 Series, in the isolation mode 1 (0 - loaded in the spooler, 1 - loaded in shared sandbox, 2 - loaded in isolated
sandbox). Win32 error code returned by the print processor: 0x0.
Information:Printing job 41.
Information:Spooling job 41.
This job actually printed.
Other jobs printed fine with no error.
There are no other errors in the "Operational" log other than the "print spooler failed to delete" error.
Any ideas what to try now?
Update: Unticking the "Enable bidirectional support", clearing the print queue and then trying again seems to have fixed the problem for now. -
Windows Server 2008 r2 as Windows XP Pro 2.0 (Issue: 1)
Windows Server 2008 r2 as Windows XP Pro 2.0 (Issue: 1)
Flabbergasted at the sheer level of idiocy required to use Windows 7 Ultimate or Windows 8.1 Pro I remain a stead fast winXPro user to this day (mid-2014) and beyond. My i3-3225 XP machine turns 2000+ Passmark system scores and excels at everything the
way we all use to, before Microsoft's policy of operating systems built for idiots, by idiots came to pass. Then as a sheer act of desperation I tried Server 2008 r2... is it the OS I have dreamed of? Short of an XP Theme conversion kit I have questions...
Problem 1) Windows Explorer: In the folder directory left pane... the little [+] box next to the folder names flash on and off each time I use the right window pane. Can I by any and all means make them not do this, remain visible, sit still; like XP used
to do?
Problem 2) Start Menu: This popup is a double wide window pane, two columns of annoyance. Can I reduce this to a single wide by removing the right pane entirely by any and all means. I have removed every button from the right pane, but it still exists, it still
has a default picture user icon and says Administrator.
Problem 3) If specific programs/drivers are unavailable for this OS 2008 r2, I presume win 7 x64 by default work.
Problem 4) Passmark benchmarking software tested my system, with windows 8.1 I had a processor score of 9,400, but server 2008 r2 put out only 8,100 in repetitive tests. Why the slowdown? I only use this as an XP like os, no actual server stuff, should i disable
something?Windows Server is not intended to replace Windows XP. i would advice to try Windows 7 or 8 instead.
1) I cannot picture what you mean. ther is a setting to define wheter the left pane should follow if you browse in the right one. Tools- folder options- general 'navigation pane'
2)Windows vista/2008 is the last version that had a (optional) single pane start menu. if you don't like the current one, ther is third party software available to replace the start menu
3) yes, these will be ok
4) 2008 R2 is a server OS and is out-of-the bow not optimized for foreground applications. Windows 8.1 on the other hand is a newer and more performant OS optimized for client usage. in both cases a lot of performance gain is to be expected by selecting
the right drivers, disabling or unisntalling unneeded software and windows features, disabling unneeded services. I would recommend to (a least) go to computer properties -advanced settigns- advanced and set 'adjust for best perfomance of" to programs (instead
of background services)
MCP/MCSA/MCTS/MCITP -
EPMA 11.1.2.1. on Windows Server 2008
Hi,
after installing and configuration of EPMA 11.1.2.1 on an Windows Server 2008 system, I got in the diagnostic tool the following messages in RED!
Foundation / Performance Management Architect FAILED AppMgrLoadAdf Launch external checker with next command: d:\Oracle\Middleware\EPMSystem11R1\..\jdk160_21/bin/java -DEPM_ORACLE_HOME=d:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=D:\Oracle\Middleware\user_projects\Development -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=D:\Oracle\Middleware\user_projects\Development\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.appmanager.AppMgrLoadAdf
Error: AppMgrLoadAdf failed when requesting information from EPMA. Please check that all EPMA services have started and are currently running.
Recommended Action: Make sure external checker is working. 7 seconds PASSED CFG: Configuration Validating that configuration tasks have been completed 0 seconds PASSED DB: Database Connectivity Checking connection to database jdbc:weblogic:sqlserver://NLDN4778DSQ.develop.ubsw.net:1433;databaseName=HPMA 0 seconds FAILED DimEditorLoadAdf Launch external checker with next command: d:\Oracle\Middleware\EPMSystem11R1\..\jdk160_21/bin/java -DEPM_ORACLE_HOME=d:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=D:\Oracle\Middleware\user_projects\Development -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=D:\Oracle\Middleware\user_projects\Development\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.dimeditor.DimEditorLoadAdf
Error: DimEditorLoadAdf failed when requesting information from EPMA. Please check that all EPMA services have started and are currently running.
Recommended Action: Make sure external checker is working. 7 seconds FAILED EnumApplications Launch external checker with next command: d:\Oracle\Middleware\EPMSystem11R1\..\jdk160_21/bin/java -DEPM_ORACLE_HOME=d:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=D:\Oracle\Middleware\user_projects\Development -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=D:\Oracle\Middleware\user_projects\Development\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.repository.EnumApplications
Error: EnumApplications failed when requesting information from EPMA. Please check that all EPMA services have started and are currently running.
Recommended Action: Make sure external checker is working. 7 seconds FAILED EnumDataSyncs Launch external checker with next command: d:\Oracle\Middleware\EPMSystem11R1\..\jdk160_21/bin/java -DEPM_ORACLE_HOME=d:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=D:\Oracle\Middleware\user_projects\Development -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=D:\Oracle\Middleware\user_projects\Development\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.repository.EnumDataSyncs
Error: EnumDataSyncs failed when requesting information from EPMA. Please check that all EPMA services have started and are currently running.
Recommended Action: Make sure external checker is working. 7 seconds FAILED EnumDimensions Launch external checker with next command: d:\Oracle\Middleware\EPMSystem11R1\..\jdk160_21/bin/java -DEPM_ORACLE_HOME=d:\Oracle\Middleware\EPMSystem11R1 -DEPM_ORACLE_INSTANCE=D:\Oracle\Middleware\user_projects\Development -Djava.util.logging.config.class=oracle.core.ojdl.logging.LoggingConfiguration -Doracle.core.ojdl.logging.config.file=D:\Oracle\Middleware\user_projects\Development\config\validation\11.1.2.0\validationTool-logging.xml com.oracle.epm.epma.config.validations.dimeditor.EnumDimensions
Error: EnumDimensions failed when requesting information from EPMA. Please check that all EPMA services have started and are currently running.
Recommended Action: Make sure external checker is working. 8 seconds FAILED PMAJ: EPMA Service Validating whether jobmanager service is available.
Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code: 500
Recommended Action: Check that the application is started 0 seconds FAILED DSC: EPMA DimensionServer Server Configuration Validating EPMA Dimension Server startup... failed...
Error: com.hyperion.cis.utils.BadResponseCodeException: Bad response code with GET method: 500
Recommended Action: Check application is started. 2 seconds FAILED EXT: External Authentication Check UBSW external authentication provider configuration
Error: EPMCSS-00735: Failed to get users from user directory UBSW. Error executing query. LDAP response read timed out, timeout used:120000ms.. Verify MSAD user directory status and configuration.
Recommended Action: Check that the external provider is accessible and configured correctly in Shared Services
All services are running?
Thx for any help.
Andreas
Edited by: user622503 on Jun 7, 2011 1:07 AMLooks like you are using SQL Server, if you look in windows event viewer I believe there should be a detailed error message. There are some special properties that it mentions that you must set on your SQL Server instance for it to start property.
If you see messages indicating this is the error, you might run these commands on your sql environmnent:
ALTER DATABASE HYPEPMA
SET ALLOW_SNAPSHOT_ISOLATION ON
ALTER DATABASE HYPEPMA
SET READ_COMMITTED_SNAPSHOT ON -
Windows Server 2008 r2 install error gpt partition style
Good morning I am trying to install Window Server 2008 r2 (trail) on my Dell inspiron 15 and also keep Windows 8 when I set up a partition of 50G and go thru the install it tells me The selected Disk is of the GPT partition style. How do I fix this
issue.
Thanks
MikeHi,
Since we are still discussing the same problem, so I merged them.
I want to confirm some information. Is your computer boot in BIOS mode or UEFI mode? Open computer management->Disk management->Properties->Volumes.
Is your current partition type GPT or MBR?
For now,
starting with Windows Server 2003 Service Pack 1, all versions of Windows Server can use GPT partitioned disks for data. Booting is only supported for 64-bit editions
on Itanium-based systems. For windows 7, windows VISTA and window server 2008, Booting is only supported for 64-bit editions on UEFI-based systems.
So, the solution is either to change the boot mode or convert your disk. Remind, if you want to convert your disk, data on it should be cleared.
Hope this helps. -
Joining Windows Server 2008 to Windows Small Business Server 2008
We have Windows Small Business Server 2008 and it came with a copy of Windows Server 2008 and MS SQL. (A packeged deal from Microsoft).
Long ago I installed Windows Server 2008 and MS SQL on a computer and joined it with SBS2K8.
My Windows Small Business Server 2008 crashed and I had to redo it and now I can't get the Windows Server 2008 to join it.
We are not using the computers for a domain or anything but they are on our network with regular IP addresses.
The Windows 2008 Server uses the SBS2K8's IP address for it's DNS. The DNS for the SBS2K8 is 127.0.0.1
We are using Windows Server 2008 for SolidEdge and MS SQL has to authenticate against the SBS2K8 to run.
Should I hook both computers up to a switch for their own network to get them talking to each other?
Do I have to put the Windows 2008 Server name in the SBS2K8 for a user?
Please advise and thanks.Hi:
Read the warning at the end of this and be sure you follow it.
Can you explain further this part: We are not using the computers for a domain or anything but they are on our network with regular IP addresses.
I ask because SBS MUST be a domain controller or it will not work. Right click My Computer - Properties - Computer name tab and let us know if the SBS is "domain" or "workgroup".
What I expect is the SBS is a Domain, and when you reinstalled it it becomes a new domain, even if it has the same name. The Server was a member server in the old domain, so the solution to this is to change the Server 2008 with SQL from domain to
workgroup in the same place as above, then after it restarts rejoin it to the SBS domain by changing it once again to Domain.
Both the SBS and the Server 2008 should have static ip addresses and the SBS should be the DHCP server for the rest of the network, not your router/firewall.
Warning: You MUST check in control panel - users on the Server 2008 to verify you have a local administrative level account and you are positive you know the password for that account. When the server restarts after being placed into workgroup
mode the domain administrator will no longer be able to logon to the Server 2008.
Larry Struckmeyer[SBS-MVP] If your question is answered, please mark the response as the answer so that others can benefit. -
Hi,
I am working on a validation script to get the list of hotfixes installed on Domain Controllers every month as part of our monthly DC patching process. I have been successful in getting these details for DC's with (Windows Server 2008
R2 SP1, Powershell v2.0) using the below command.
Get-HotFix -cn $computer | Select-Object PSComputerName,HotFixID,Description,InstalledBy,InstalledOn | where InstalledOn -ge (Get-Date -Day 1 -Format d) | FT -AutoSize
I execute the above from a jump box with powershell v4.0 (Server 2008 R2)
However, when I try the same command from the jump box to query DC's with (Server 2008 SP2, powershell v2.0). It doesn't return the InstalledOn date and time. It was giving error for the InstalledOn property and hence I renamed it to $_.InstalledOn. Now
I don't get error but still no details displayed for InstalledOn property.
I tried using the below, as could see on few forums that this might resolve the issue. I also tried removing the "where" part but still no installation date returned.
Get-HotFix -cn $computer | Select-Object HotFixID, Description, InstalledBy, @{l="InstalledOn";e={[DateTime]::Parse($_.psbase.properties["installedon"].value,$([System.Globalization.CultureInfo]::GetCultureInfo("en-US")))}}
| where {$_.InstalledOn -ge (Get-Date -Day 1 -Format d)} | FT -AutoSize
Have tried this locally on the 2008 SP2 DC but still not working. Please advise what is going wrong?
Note: If I execute the below command locally on the 2008 SP2 DC, I am getting the InstalledOn output. However, when executed from the jump box with powershell v4.0 (Server 2008 R2) to query
the same 2008 SP2 DC, it just gives the prompt again without any error or output. This behavior is consistent for other 2008 SP2 DC's in the environment.
Get-HotFix -cn $computer | Select-Object HotfixID,Description,InstalledBy,InstalledOn | where {$_.InstalledOn -ge (Get-Date -Day 1 -Format d)} | FT -AutoSizeHi jrv, I have already tried the Win32_QuickFixEngineering option, which doesn't work either. Apologies for not mentioning the workarounds that I have already tried.
Get-Hotfix seems to be just a wrapper for Win32_QuickFixEngineering as per the below article. (http://technet.microsoft.com/en-us/library/hh849836.aspx)
I have seen a mention of using the WU ActiveX control on few forums, but was too lazy to read it through.
After rigorous testing, it makes me realize that somewhere the Get-Hotfix dates formatting\comparison isn't working.
Maybe you are looking for
-
Error while loading Crystal report
Professionals' I have encountered an error while opening a crystal report 2008, I am using VB.NET 2005 with Business One. When I am running the source code it works fine. With ARD I am getting problem "Crystal report can not open". What should be the
-
GUI_GET_DESKTOP_INFO is not worked when run in background
Dear all, I want to retrieve the computer name using this function module. It is working fine in foreground but it returns no result when I run in background. Is there any other method to get the computer name in background? Thanks in advance.
-
How to find out workflow in various releases of SAP
Hi Experts, I would like to know as to how we can find out in which release of SAP was a given workflow introduced. For eg. if we take WS04200009(WF for leave request). I want to know if this was incorporated in ECC 6.0 or ECC 5.0 or older versions.
-
Convert from epoch timestamp to human readable date
Hi everybody, I want to retrieve a human readable date from an fpga target of a sbRIO9636 ,so what is the function which can convert an epoch timestamp to a human readable date ? (Noting that i need to retrieve the second,minute,hour,day,month,
-
WRT600N(V1.0) and LG BD390 Blu-Ray player...
For some reason the LG BD390 is not seeing both access points to the WRT600N. It is only seeing whatever the FIRST one is set to. So if I set the top one to G, it will see it as G and if I set it to N, it will see it as N and will connect fine. Howev