Property inspector goes blank and can't edit in design mode

I have the property inspector open but it is completely blank. This has never happened before and I have no idea how to get it back. In addition to that I have the view split between code and design but can not edit in design.

I have the property inspector open but it is completely blank. This has never happened before and I have no idea how to get it back. In addition to that I have the view split between code and design but can not edit in design.

Similar Messages

  • When i select the Full Screen option in video streams (like youtube, veoh, anything like that) i can do that 1 time 2nd time the screen goes blank and can only exit it with the Esc button and then i have to restart firefox and again i have my one Full ...

    When i select the "Full Screen" option in video streams (like youtube, veoh, anything like that) i can do that one(1) time second(2nd) time the screen goes blank and can only exit it with the escape(Esc) button and then i have to restart firefox and again i have my one "Full-screen Ticket"

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • Whenever I try to open a new tab, the tab just goes blank and says "New tab". I can't open any websites. What do I do?

    It started very suddenly. The tab just went blank when I tried to open a new one, and then just continued every time I open a new tab. It loads the selected website for a milisecond, and then just goes blank and says "New tab". In my own language of course. I tried reinstalling, rebooting and nothing seems to do it. I have Tab Mix Plus as a tab manager.
    What can I do? Please help.

    That did the trick. But I had to start Firefox in safe mode, because it just went to the blank page where the Troubleshooting page should have been, of course. Thanks for the help anyway. Now I just need to get my old addons back.

  • When I use Siri, my screen goes blank and the apple logo appears and disappears. I've reset it, but problem still occurs. How can I fix this?

    When I use Siri, my screen goes blank and the apple logo appears and disappears. I've reset it, but problem still occurs. How can I fix this?

    Did you reset your iPad like this: Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.

  • Firefox crashes when I load any youtube video on the latest version, it not only crashes firefox but my whole computer goes blank and I have to restart, why is this?

    Backstory: There are two possible events that could be causing this
    1: At some point I may have followed a ''Tinyurl' link that consquently lead me to a youtube video, to which youtube worked perfectly fine before hand, and this is where i witnessed the first crash. Theories into whether this link, previously stated, may have done something to my system have been thought about, but the fact that youtube still works on the latest Microsoft Internet Explorer seems to present the idea of a virus or an error redundant. I own the latest Macfee antivirus software and Ccleaner(running the registry check) and have run them complete with disc defragment and scan disc error recovery along with an additional malware scanner. Nothing seems to have come up on anything. After doing all this, my last resort was System restore and this seemed to solve the problem, mainly because i had an earlier version of firefox. therefore i resisted updating for aslong as possible whenever it told me to update. but the otherday i thought i'd risk it again thinking it may have been a problem alot of people have been having and it would of been fixed, but sadly it hasn't. this lead me to google the problem and was advised to start firefox on 'safe mode' as there may have been a confliction between add ons or plugins with youtube or some thing like that, but sadly that hasn't worked either. The plugins i had installed with it were the ones firefox has told me to get, or recommended and the only two addons i had on firefox was Adblock plus (fanboy subscrip) and Noscript.
    Details of what actually happens: go to a youtube link, video loads for about 2 seconds(both video and audio), screen freezes, and flashes maybe once with some small lines across the bottom half of the screen horizontally towards the right corner, then the screen goes blank and makes my laptop dorment, but still running, thus I restart my system.
    Sadly now when I system restore there isn't a point far back enough before this problem. So its either i downgrade(which seems to be the only option) or simply stop using firefox, as internet explorer works perfectly fine. however running firefox with no scrip and adblock plus is the ideal browser customisation, which is why this is rather annoying.
    so number 1 was the tinyurl theory and i must admit i was abit foolish to follow such a random link, but whats happened has happened.
    2: basically there is a major disfunction with the latest firefox that has to with the addons i have included onto firefox and this seems to be causing a terrible effect on my system.
    in a nutshell: firefox worked perfectly before upgrading to the new firefox and before i followed this link, the rest of my system is completely normal and virus and error free or so it says, Other browsers seem to work also. safe mode does not cure the problem.
    Running on a customised Dell laptop, which is pretty midrange-toprange and hasn't been active long, so it has the general HD video card thats included in all Studio 15 Dell laptops.
    any help appreciated.
    cheers.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; MDDC; OfficeLiveConnector.1.5; OfficeLivePatch.1.3; Creative AutoUpdate v1.40.02; AskTbMYC-SRS/5.7.1.11118)

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • When I am on a phone call and I double click the button to go to my home screen, then open another application (usually my calendar program, Calengoo), my screen goes blank and I am not able to return to either the app, the phone, or the home screen.

    When I am on a phone call and I double click the button to go to my home screen, then open another application (usually my calendar program, Calengoo), my screen goes blank and I am not able to return to either the app, the phone, or the home screen. If I am speaking to a person, if they hang up then I am back to the phone application. If I'm leaving a message, I am unable to return to the phone screen to end the call, and have to wait until the other phone hangs up. I'm also unable to switch back and forth to look at my calendar if I'm calling someone about scheduling. This has only started happening since the most recent iOs update. I run into situations similar to this about once per day during the work week, as I use my phone is this manner quite often. While not life altering it is quite frustrating. Can anyone here help me figure out a way to avoid this? If it helps, I have noticed a general downgrade in overall performance starting two system updates ago (apps opening more slowly, closing unexpectedly more often, etc.). I have an iPhone 3GS with the latest OS update.
    Thank you for any help or suggestions,
    Chris

    I could be corrupted backup.
    You can check the notification settings for message.
    Settings>Notification Center>Messages>Alert Style
    It should be on Banners or Alerts.
    Settings>Messages> Turn on Imessage and send as SMS and below that "Blocked" to check if you have any numbers block might be blocking the message.
    You can also do a hard reset by holding power and home till it restarts and release after seeing the apple logo.
    Still doesn't work? Settings>General>Reset>Reset all settings

  • Right after starting up display goes blank and shuts down?

    Right after starting up display goes blank and shuts down?
    Any ideas I can't get it started. Thought I would ask for help before making a genius appt.

    Thanks that was very helpful info. I was able to boot into the recovery disk partition and run some basic HD tests and it found no issues.  Then I booted into the hardware test and it found no issues. After these tests it still failed to boot into Mavericks. I'm guessing its a software issue and I can not find the original computer disk. I have a time machine backup from 2 months ago and I could use the disk utility on the recovery sector to launch it but I want to wait and see if I can boot from a software DVD first. If I can repair the current OS that is my best option.
    Thanks.

  • When I try to transform an object my screen goes blank, how can I correct this?

    When I try to transform an object my screen goes blank, how can I correct this?

    Please answer all questions you have been asked and provide all pertinent details if you want help.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Website loads, then goes blank and says loading forever

    Firefox 4b1, site loads normally, once loaded page goes blank and displays the loading icon forever, when this happens report broken website grays out and cannot be used. Works in F3.6 just fine, just trying to confirm something on my computer isn't affecting. Affects all sub-pages.
    == URL of affected sites ==
    http://borderlands.wikia.com

    Try clearing your cache and cookies.
    # Open the Tools menu, then select Clear Recent History... .
    # In the '''Time Range to clear:''' drop-down, select '''Everything'''.
    # Click the arrow next to '''Details''' to display the list of items that can be cleared.
    # Select both '''Cookies''' and '''Cache'''.
    # Click Clear Now .

  • Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

    Ipod nano 5th gen - works fine when plugged in either to wall or computer and appears to be fully charged but as soon as it is unplugged screen goes blank and will not start - is the battery shot?

    Yes, your battery is likely toast and in need of replacement.  Not much else for troubleshooting here.  Sorry.
    B-rock

  • When I click on certain website like youtube the screen goes blank and will to open. What do I need to do?

    when I click on certain website like youtube the screen goes blank and will to open. What do I need to do? I really need help

    1. System Preferences >  Flash Player > Advanced >  Delete  All
         Press the "Delete All" button
         Install Adobe Flash Player.
        http://get.adobe.com/flashplayer/
        Follow the prompts.
        Quit Safari.
        Restart computer. Relaunch Safari.
    2.  Allow  Plug-ins
        Safari > Preferences > Security
        Internet Plug-ins >  "Allow  plug-ins"
        Enable it.
        Press " Manage Website Settings" button for more options.

  • Apart from the lock button problem in iphone 5 the display brightness suddenly goes blank and becomes normal after locking and unlocking the iphone. The Apple service centre in India is denying to service the iphone as it was purchase in USA even thoug it

    Apart from the lock button problem in iphone 5 the display brightness suddenly goes blank and becomes normal after locking and unlocking the iphone. The Apple service centre in India is denying to service the iphone as it was purchase in USA even though the iphone is in warranty.

    iPhones do not have an international warranty.  Warranty is valid only for the country of purchase.  This is most likely because different countries require different iPhone models.  Not reasonable to expect all countries to maintain stock for all models.

  • My phone screen goes blank and after a minute or so goes back to home screen. why?

    hello. my phone screen goes blank and after a minute or so goes back to home screen. why? any help please?

    Howdy mbaeguasu,
    It sounds like your iPhone may be restarting unexpectedly while you’re using it. Take a look at the article linked below and, if you haven't already, try installing the latest version of iOS on your device.
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
    So long,
    -Jason

  • I have a new Nikon D750 sitting on my desk and can't edit the photos with any adobe product?  We are in full wedding season and am a little frustrated.  Photo mechanics opens them right up to download them.   I am using the Nikon software to convert them

    I have a new Nikon D750 sitting on my desk and can't edit the photos with any adobe product?  We are in full wedding season and am a little frustrated.  Photo mechanics opens them right up to download them.   I am using the Nikon software to convert them into tiffs.  when is the camera raw update coming out.  I am not the only photographer with this issue check out all the chatter about it.

    This happens every single time a new camera comes out from one of the two big camera makers. Nikon and Canon do not send preproduction units to Adobe, so Adobe has to go out and buy a D750 or whatever from the store to test and profile it before they can update Lightroom. They can't get one earlier than you and I can. The profiling is quite an extensive operation. Other camera makers do send preproduction units, use dng, or do the profiling in-house and there you often get support right from release. If camera makers would finally embrace an open raw format such as dng, this whole problem would be gone but both Canon and Nikon seem to think they live in an upside-down world where their clients only use their software.
    Usually the dead period only lasts a few weeks but it is frustrating nevertheless. My only advice is to not buy a new camera at the day of release and expect to have third parties to support it. You definitely should not be buying these cameras right away if your business depends on it. Aperture, Capture One, etc. have the exact same problem. No third party (read non-Nikon in this case) will support the camera from the release date. Some are quicker than other adding support. Adobe is somewhere in the middle of the pack in this respect. Nobody outside of Adobe knows when an update comes out. Could be tomorrow, could be a few more weeks or a month. They might jump straight to Lightroom 6 and never add direct support to LR 5. Sometimes they will first bring out a beta version of dng converter that will convert the new camera's nef files to dng, which will work fine in the current Lightroom before updating Lightroom itself.

  • TS3274 Hi I have a 1st generation iPad 64Gb, my problem is when I am surfing the Internet or trying to read a magazine that I have bought and downloaded, the iPad closes down the app and the screen goes blank and then back to the home page. Any ideas?

    Hi I have a 1st generation iPad 64Gb, my problem is when I am surfing the Internet or trying to read a magazine that I have bought and downloaded, the iPad closes down the app and the screen goes blank and then back to the home page. Any ideas?

    Hi Fayed11,
    Welcome to Apple Support Communities.
    You may find this article useful for troubleshooting any apps on your iPad that aren't behaving as expected:
    iOS: Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/ts1702
    Have a great day,
    Jeremy

Maybe you are looking for

  • How to get the PDF Document version when using Digital Signature

    Hi, I have a form which contains two signature fields. When i sign the form the pdf document is saved as a version which can be seen by clicking the Signature Panel. I need to get the binary of the versions stored in the form. Please suggest me the h

  • Sizing jpg or gif images to use in DW

    Being new I am unaccustomed to the sizing (pixels) as much as I probably should be. I have Adobe Photoshop, Illustrator, InDesign, Dreamweaver, etc. I understand that you should use images of titles, etc. that you want to use different fonts for sinc

  • Firefox changes "(" to "%28" in download filenames. IE does not. How to fix?

    When I download a file from a web site: Example ----- file (test) number1.pdf Using IE, the downloaded file is named --------------------- file (test) number1.pdf Using Firefox (36.0.1) the downloaded file is named --- file %28test%29 number1.pdf Is

  • Login screen problem

    Hello, I have a problem with my macbook (lion): my login screen doesn't work well cause I disabled my profile visualization using onyx. Now I can see only the guest user and  I can't enter in my admin profile. How can I riactivate my admin profile?

  • How system read transaction for movement type

    Dear friends, We are facing problem - in case of movement type 101 system is reading PRD transcation key for valaue of inventory with another transaction key WRX.  I dont know the logic how system read transction key. If I use 101 movemment type then