Property not appearing in Taxonomy list?

Hi All
I have created 2 properties which will be used to classify documents in a taxonomy structure. However I have a problem - the properties I have created do not appear in the property list in the 'Taxonomy Query Builder'. I am not sure why?
Does anone have any ideas what I am missing?
Thanks in advance!

Thanks for that it worked on for the Taxonomies however the values are now not appering in my XML form - the combo boxes are empty?
Do they have to be manually inserted in the form? i.e Static combo box?
Thanks

Similar Messages

Treatment of exchange rate difference- company code not appear in the list

Dear guru,
I am configuring the treatment of exchange rate difference (SPRO> MM> LIV > Incoming invoice> configure how exchange rate differences are treated). However,the company codes that needed to be configured are not appear in the list. Please note that in the config screen, dont have the option of "New entry", we only set base on the list of existing company codes.
Also, please be noted that we configured accounts for KDM, PRD in OBYC already
Appreciate your respond.
Thanks and best regards,
Hong

Hi,
Check in table "T169P" & "T169V", whether your Co. code exists or not? If not then maintain following config settings.
SPRO > Materials Management > Logistics Invoice Verification > Incoming Invoice
> Maintain Default Values for Tax Codes (After maintaining this entry by "New Entries", it will start appearing for following options)
> Configure How Exchange Rate Differences Are Treated
> Configure How Unplanned Delivery Costs Are Posted
> Edit PO Supplement Text in Invoice Verification
> Set Check for Duplicate Invoices

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help?

I still use Aperture 2.1.4. I need to export an image file with a CMYK profile. Whereas a generic CMYK profile is listed in ColorSync Utility, it does not appear on the list of profiles in the edit portion of the export preset dialogue. Help? Is there some way to add the CMYK profile to the list of choices that are available in the export preset dialogue such that I can choose it?

leonieDF
Thanks for your response. My profiles are located within color sync utility as you can see here:
These profiles do not respond to clicking and dragging. Since they are all in one place, more or less, I'm reluctant to make further attempts to relocate them. Accessing the CMYK profile is the first difficult experience I've encountered with this arrangement. I have never needed the CMYK profile until recently, and that need has now past. However, it remains a mystery to me as to why it does not appear with all the others on the menu of export choices in Aperture 2, or on the menu of profile assignment choices in the Preview application (where again all the other profiles are listed as choices). I'm beginning to think my current set up will permit me to view an image that was created in CMYK space, but does not easily assign, or convert to that space. I don't face these restrictions with all the others, so it remains a curious circumstance for me. I anticipate upgrading my computer and software in the near future which might alleviate this issue altogether. Again, many thanks for your attention to this matter. The reach of this community is astounding.

I need to reset my security questions, I don't have a rescue email and I live in Lebanon (Does not appear in the list of countries for apple calls)

Hi,
I forgot my security questions and I don't have a rescue email setup.
I serached the internet and the only solution I found for that is to call apple. The proble is there is no phone to call, they have to call you and there is a list of countries.
I live in Lebanon and it does not appear in the list of countries listed for apple customer support call.
How can I reset the security questions.
thank you

The Three Best Alternatives for Security Questions and Rescue Mail
    1. Use Apple's Express Lane.
          Go to https://expresslane.apple.com ; click 'See all products and services' at the
          bottom of the page. In the next page click 'More Products and Services, then
          'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
          ID security questions' and click 'Continue'.
     2. Call Apple Support in your country: Customer Service: Contact Apple support.
     3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

ITunes Does Not Appear in the List of Default Programs?

My wife is trying to get iTunes to be her default media player, using the instructions found at this link: http://support.apple.com/kb/HT3202.
However, when she goes to the list of default programs, following steps 1 and 2 at that link, iTunes does not appear in the list.
How can we correct this?
Thanks very much in advance for any info.

Vik-
I was having this same problem. I understood how to change the default program but like yours my iTunes was not in the list so therefore I was unable to set it to default.
This worked for me: (I have Vista)
I checked for updates on my iTunes program and there was an overdue update. I installed and restarted iTunes. Then went to my Default Programs tab and followed the instructions just as described in the support material and after my installation of the newest update my iTunes was now listed in the lineup of available default programs.
I hope this works for you as well!
Thanks and good luck!

Taxcodes are not appearing in dropdown list PO & MIRO

I have created new Taxcode but this taxcode does not appear in dropdown list at item details tab of PO creation screen. when enter manually taxcode system accepts but its not showing in dropdown list. similar is case when i check MIRO ..new created Taxcode is not appearing there. Could you please help me out to find solution

Hi,
In T-code OBZT select the transaction as "Relevant for all transaction against your tax code" then check the same in PO and Miro it will appear in the drop down list.
Regards,
Patil

The Shared option is not appearing in my list. I am turning it off and the back on and it is not appearing. Please HELP

Been trying for anout 1 hour now and no joy. I am trying to transfer all my music and apps etc from my old laptop to my new and read home sharing would be the easiest. However I am switching home sharing on and it is not appearing on the list.
Help would be appreciated.
Thanks

Device not detected in iTunes for Windows

Mail messages in my In Box are not appearing in the list of messages.

Mail: SOME mail messages in my In Box are not appearing in the list of messages. Instead, there's a blank line in its place if already read, or just the blue dot if unread. But when I click on the line, the message's column/header detail appears (and I can open it).
(Coincidental or not, immediately prior to this situation, I established a New Rule that mail coming from my son's email address should be Moved to the IN Box as they had been going to Trash. None of the emails I'm questioning have any reference to his email address in them.)

Continuation of info (from GDTGG): When I leave that mail message and click on a different one, the blank line marking its place once again appears for the message. (There was a similar problem posted by someone else in 2009 entitled "Inbox Has Blank Lines" but with no apparent solution that I could find.)

Created new data source, does not appear in the list

Hi I created a new data source using information provided in http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_1.html. But the new data source I created does not appear in the wizard. Could some body give me a clue? Can somebody point me to more detailed documentation on how to integrate a new data source into Reports Builder?
thanks
Srinivas

Hi
I desperately need help to troubleshoot why my data source is not appearing in the list eventhough I feel I have done things as per the tutorial. From reading the tutotial I am not clear -
- If specifying an icon is mandatory. If I don't specify an icon my datasource should still appear right?..without an icon?
- It is mandatory to implement the editor. I have hard coded things because I don't foresee any interaction by a user with the data source. There is just one column which WILL always appear if this DS is chosen.
- Finally in the integration instructions(http://otn.oracle.com/products/reports/apis/pdstutorial/textPDS/PDS_5.html) they mention that the classes have to be compiled with "report build" , is that a tool?
thanks
Srinivas

CDs loaded, Artist name does not appear in ARTISTS list

Among all the CDs I've loaded and songs purchased, I have 2 Carly Simon
CDs on my video iPod. However, Carly Simon's name does not appear in my
list of ARTISTS in the Music Menu.
I did a sync with my iTunes list and the songs are indeed loaded.
Why is her name missing from the list and how do I get it back?
It used to be there!
Thanks-

I just found the answer on the discussion board.
In my SETTINGS I had compilations turned on.
When I switched it off, Carly Simon was back in my
ARTISTS list.

Epson r800 prints, but does not appear in Printer List: can't use Utilities

My Epson r800 prints, but does not appear in Printer List. It is connected via USB to the iMac. A Brother LH-2070N is connected via AirPort Extreme. I need to use Utilities to clean the head of cartridge, check levels, etc.. Is there a way to fix this problem?
iMac Mac OS X (10.4.9)

For your Epson try this:
Hard Drive, Library, Printers (folder), Epson folder,
Inkjetprinter folder, Utilities folder and here you
will find Epson Printer Utility2. Click on it and it
should work.
Note. Epson utilities will not work unless the
Printer is directly connected to the computer.
Had the same issue with my 2200 photo and the above
worked.
Tried again after reinstalling the drivers. There is no separate Inkjet Folder, but the Printer Utility is within the Epson folder. Unfortunately, the r800 still does not appear in the Printer List, hence no utility.

Why MSDAORA provider does not appear in the list of providers of management studio?

I have a Windows Server 2008R2
64-bit standard. with SQL Server
Express with Advanced Services 2008R2
64-bit. After performing the
above installation and do all the updates, I installed
Oracle 10G 32 bit client.
open sql server management studio and looked
at the list of providers. MSDAORA
does not appear in the list. I can do to make the
management studio put it in the list of
providers.
ps: this server must have the client
installed Oracle 10G 32
bit because I have several 32-bit applications
that use this client

Hello,
MsDaOra is the old (bases on Ora 8.5) deprecated Microsoft driver for Oracle; you should avoid to use this driver.
You can install the 32 bit and 64 bit Oracle OleDb driver parallel on the machine, that works. The you can use the driver version depending on the tool you work with.
Olaf Helper
* cogito ergo sum * errare humanum est * quote erat demonstrandum *
Wenn ich denke, ist das ein Fehler und das beweise ich täglich
Blog
Xing

Enhancement view does not appear in my list of views

Hi ,
I have created an enhancement and now I used the wizard to add a new view to this application.The view created does not appear in my list of views but it appears in my Z BSP application.
Please help!
Regards
Shilpi

Check whether you are in Enhanced Version of UI Component ! (Original UI CMP name and Enhanceset : Z*)
Thanks
Allot points if this helps !

Album artwork does not appear in album list or grid

I added album artwork (did get info then copy and paste) and it shows up fine in cover flow but does not appear in album list or grid view.
What am I doing wrong? Artwork files were scanned from album covers that I have.

Your album artwork cache may be corrupt. Provided most, if not all, of your artwork is embedded you can simply delete the Album Artwork folder that you will find inside your main iTunes folder and then scroll slowly through the library in Grid/Albums mode to rebuild it. Any images that were "downloaded" rather than embedded will need to be reacquired.
Threre are separate folders for the downloaded and cached images, but I've always gone for a complete rebuild so I don't know it would work to delete just the cached folder.
tt2

CD does not appear in Source list

Hi
when trying to import from CD, the first CD appears in the source list but subsequent CDs don't. I've looked at the iTunes support page and seen the post about running msconfig but the file mentioned does not appear startup item list (so I cant disable it ).
I have the latest patches for XP and the CD drive.
Any further thoughts ?
Thanks

That did not work either. I get another message that says the disk image failed to mount.
I did finally get the updates for Panther last night via software update, but it has not solved anything. Also had someone come over and see what they could figure out -- to no avail.
Digital data CD's appear on desktop just fine. CDr's load. Just not music cd's. It's driving me crazy!

Property not appearing in Taxonomy list?

Similar Messages

Maybe you are looking for