Proplem about use IDsync for windows 1.0 to sync users accounts

Hello.
I set the DS5.2 and IDsync 1.0 on the sunfire 240 and os is Solaris 9 .
I set all about the configuration of DS5.2 and Idsync include CA certifications on both software.
I can sucess sync useraccounts from Windows2003 to Sun.but I can't sync Useraccounts from Sun to Windows2k3.
and this my input command:
this is sync from windows to sun
bash-2.05# pwd
/var/opt/mps/serverroot/isw-LDAP-Server1/etc/CNN100
bash-2.05# idsync resync -h ldap-server1.sinomos.com -p 636 -D "cn=directory manager" -w passwdadmin -s dc=sinomos,dc=com -Z -P cert7.db -q passwdadmin -c -i NEW_USERS
Operation is started. Enter 'c' to cancel.
User progress: Dumped: 1
User progress: Dumped: 1 In sync: 1
this is sync Sun to Win2k3 happen a error
bash-2.05# idsync resync -h ldap-server1.sinomos.com -p 636 -D "cn=directory manager" -w passwdadmin -s dc=sinomos,dc=com -Z -P cert7.db -q passwdadmin -o Sun -c -i NEW_USERS
Cannot reset DS passwords when resyncing from DS to Windows.
Can anyone help me ! thanks!!

David,
The SSL related parameters in the IdSync CLI only apply to the communication between the command line and the configuration directory server.
The communication type to be used during the resync operation is the same as during normal synchronization. This is what you configured with the management console, when you setup your Active Directory and Sun Directory sources.
The -i NEW_USERS option can only be used when resync-ing from Active Directory to Sun Directory server.
This is why you get the error message "Cannot resete DS Passwords when resyncing from DS to Windows".
Bertold

Similar Messages

Idsync for windows - linked but not sync'd

This command succeeded, in the linking.log file, users are matched:
idsync linkusers -h ala-proxyldap -p 1389 -D "cn=Directory Manager" -w password -s dc=wrs,dc=com -n -q configwrs -f ../samples/jonathan.cfg
Immediately after running the above, I did the 'resync' command but it failed, corresponding users could not be found:
/idsync resync -h ala-proxyldap -p 1389 -D "cn=Directory Manager" -w password -s dc=wrs,dc=com -q configwrs -l test
============
Why?

I am running into the same problem you have. Any luck? Please advice.
Thanks!

Printer shared from my Mac is not seen from a PC using Bonjour for Windows

I am going nuts here, hope someone can help.
I have a Canon multi-function printer (MP830) attached via USB to a Mac G4 (with Mac OS X Tiger). At one time, I had it set so a Windows 2000 PC could print to it but deinstalled it after some printing issues, and have been unable to get to working again. The machines are connected together via a Netgear router. As far as I know, everything is the same as it was before, yet I cannot get it to work as it did.
- The printer works fine from the Mac.
- If I connect the printer to the PC, it works fine.
- On the PC, using Bonjour for Windows, I cannot see the printer attached to the Mac but I can see, and print to, an Epson printer that is attached to a different Mac.
- And from the second Mac, I am able to see -- but not successfully print to -- the Canon printer. The print job stays in the queue of the second Mac and says "Unable to connect to SAMBA host, will retry... Error: Connection failed with error."
- I have tried:
-- de-installing and re-installing Bonjour for Windows and the Canon print drivers on the PC
-- and have de-installed and re-installed the Canon drivers on the Mac
-- I have removed and re-added the Canon printer on the Mac. Printer Sharing is on, and this printer is checked in the Sharing box.
Any suggestions?
G4 Quicksilver and Dell PC with Windows 2000 Mac OS X (10.4.9) Canon MP830

Thank you. Those are beautifully written procedures.
Looks like it's a network issue. I reach the step, "Adding a printer using the wizard":
You must enter the following URL, you must use the Queue Name you noted down earlier
http://<IP address of Mac>:631/printers/Queue Name
which I do, entering
http://192.168.0.4:631/printers/MP830
and I get the following error:
"Could not connect to the printer. You either entered a printer name that was incorrect or the specified printer is no longer connected to the server."
And then I am toast!
Using the other procedure, I simply don't see the Mac's printers in the Bonjour Wizard's "Browse for Bonjour Printers" window.
Not sure where to go from here -- any ideas?
The Mac's IP (set via DHCP) is 192.168.0.4, subnet mask 255.255.255.0. The PC is 192.168.0.5, I can't find the subnet mask.
Pretty sure it's a network config issue, especially isnce I can Bonjour to my other Mac.
TIA...

Help downloading & using Illustrator for Windows Vista 32 bit laptop

Hello everyone:
I'm new to Adobe forums and would like to ask if anyone knows how to work around using Illustrator for Windows Vista 32 bit laptop. I tried twice, yet won't allow download due to "system requirements." I'm trying to start with a free trial. Thanks for the assist in advance!

As Mike said, CS6 is the last version to support Vista.
Download CS6 products
Creative Suite 6
Mylenium

I am running Office 2013. Trying to sync my reminders with my iphone using icloud for windows, but it is not working. Can anyone please help?

I am running Office 2013. Trying to sync my reminders with my iPhone 5c version 7.1.2 using icloud for windows, but it is not working. Can anyone please help?

I have photoshop elements 2.0 for xp. Is there a chance of using it for windows 8 ?

I have photoshop elements 2.0 for xp. Is there a chance of using it for windows 8 ?

Hi jerryoops,
Photoshop Elements 2.0 has not been tested and is incompatible for Windows 8.
Please consider purchasing the latest version Photoshop Elements 11.0 which is compatible with Windows 8.

Is there a way to burn audio to a cd using itunes for windows?

Is there a way to burn an audio cd using itunes for windows?

Make a playlist.
Click File>Burn Cd

Using Lightroom for Windows 8.1 with Epson Stylus Photo R3000 printer.

Using Lightroom for Windows 8.1 with Epson Stylus Photo R3000 printer. From PRINT section, if I click either "Page Setup" or "Printer" I get the Epson printer dialog box, drill down, change settings- so far so good. When I'm finished with the settings and close the dialog box (hit OK) the print job starts immediately; I never get a chance to hit the Lightroom "Print" button. Question: does this bypass any Lightroom processing or control of the print job?

Even if I just click the Printer button to verify my settings I should then return to Lightroom, and then click Print to start the job. This does not happen, the job starts as soon as I close the properties dialog box. Again, is any Lightroom processing or control being bypassed because of this?

What do you think about using exceptions for something more than errors

if you look the java.lang.Exception description at the JDK javadoc, you can see the following text:
"The class Exception and its subclasses are a form of Throwable that indicates conditions that a reasonable application might want to catch."
... we can�t see "error" word anywhere!!
What do you think about using exceptions for something more than errors? Can be possible use them as a way for send information to upper layers?
Thankx in regards...

it seems that what you say is a functional way of achiveing that, yes
but Exceptions are generally reserverd for "Exceptional" situations ie program messing up or invalid data
it does require a fair bit of processor time to actually generate and throw an Exception.
so, all in all its "better" to use "normal" condition flow control to achive what you want.. you can always return early, break loops, call methods to pass information

I share a macbook with my other half and we both use it for our iphones. When syncing using the new software I now have all of her and my contacts on my phone. I don't want her contacts! How do I get rid?

I share a macbook with my other half and we both use it for our iphones. When syncing using the new software I now have all of her and my contacts on my phone. I don't want her contacts! How do I get rid?

Hi,
You have 2 solutions:
1 - You can use 2 differents icloud account
2 - You use the same account but you don't sync yours contacts.
You configure that in Settings > icloud
You activate or desactivate what you want.
Have a nice day.

1 Apple TV 2nd Gen, Windows 7 Computer with multiple user accounts

The issue that I am having is I have 1 Apple TV 2nd Gen and Windows 7 Computer with multiple user accounts.
When I log onto my Windows user account, open up Itunes and turn on home sharing my Apple TV work perfect but if another family member switches to their Windows user account without logging me out, the home share shows up on Apple TV but it just says "Loading ... Library" and never loads.
If we switch back to my user account, restart iTunes, everything is fine. Is there a way to keep my home share active in ATV2 across multiple user accounts? All of my video is under my account.

You can home-share multiple libraries but only use one account at a time.

Inquire about the best laptop specifications for Developing Windows Apps and 3D modelling Animation using "Kinect for Windows v2"?

I need some help in choosing laptop that is most compatible with "Kinect for Windows v2"; in order to develop Windows Apps, and 3D modelling Animation and Character Design. Which is better (Specifications):
HP Pavilion Notebook PC 15-p150ne
AMD A10-5745M +
AMD Radeon R7 M260 (2 GB DDR3L dedicated) +
4 GB 1333 MHz DDR3, OR
HP Pavilion Notebook PC 15-p034ne
Intel Core i5-4210U + NVIDIA GeForce 840M (2 GB DDR3 dedicated) + 4 GB 1600 MHz DDR3L

The second system with the Intel chipset will more than likely have the Intel USB3 chipset required for Kinect. As for GPU they are similar, but the i5 with DDR3 1600MHZ ram is a better option. Keep in mind, if you are doing anything in-depth for
3D, a laptop isn't the best options, but if you have to go mobile then you have to decide what is best for your requirements.
Carmine Sirignano - MSFT

Anyone else having an issue with TCP connections using iCloud for Windows?

Hi,
Before I asked this question, I did wait to see if any related questions came up, but none did, so I submit it now.
On my admittedly older laptop running Windows 7 64b Home, I've run into difficulties with the iCloud for Windows app to the extent that I had to uninstall it.
It would that, as my laptop was running, in the background, iCloudServices.exe would endlessly iterate TCP connections, which, while not actively sending or receiving any data, after some hours would number over 100 instances, taking up resources, and grinding my laptop's WiFi connection to a grindingly slow pace. I ended up, within the app, turning off everything, iCloud Drive and Photos, (I never used bookmarks), but still this would continue to occur.
I contacted Apple Support, explaining what was going on, and they stated they only dealt with IOS and gave me a Microsoft Support number. When I called Microsoft support, I came more and more to the realization that the issue was specifically with the iCloud for Windows app, as that was the only software that was endlessly creating and not closing TCP connections as it was. How was Microsoft supposed to solve an issue with Apple code?
So I called Apple back, whereupon they insisted it was a Microsoft issue. I explained other cloud services installed on the same computer were not having the same issue, it was unique to ICloudServices.exe. They stated they only dealt with IOS. I stated I purchased an iPad Air less than 7 months ago, and was trying to run iCloud in support of that. They again stated they only dealt with IOS, and suggested I again try Microsoft. I asked them if it was reasonable to expect Microsoft to solve issues with Apple code? They said regardless, there was zero support offered for anything having to do with Windows, and all I could do was uninstall the app, which I did, though that did not feel very satisfactory to me. My thinking is, if Apple writes a Windows app in support of their hardware, they should offer support for it.
Anyway, I was just wondering, is this an issue unique to me? or have others experienced a similar issue? I found this issue by opening the Windows Resource Monitor, looking under the Networking tab, and scrolling through the TCP Connections section to find 100+ concurrent iCloudServices.exe instances listed, whereas even Chrome, with multiple tabs and extensions, topped out at around 20.
My one month old Desktop, DYI, sports a solid Asus 1150 MoBo, i7-4790k cpu, 16GB Ram, and an EVGA GTX 970 video card. I list some specs only to illustrate this computer has no hardware issues in comparison to my long in tooth laptop. On this desktop, running Win 8.1 Pro 64b, at least as many, identifiably Apple, background service TCP connections are created even compared to Chrome, regardless of many tabs being open, many extensions, and even some related apps. Adobe does not even come close, though I run the full CC subscription. On this new computer, running Windows 8.1 Pro 64b, there are currently over 50 TCP connections and loopbacks that do not identify themselves, with just a - for the Image, and PID. With the experience on my laptop, I wonder how many of these are generated by Apple software, if not specifically iCloud software?
The frustrating aspect of these connections is they seem in no way active, While the Chrome and Adobe connections can be seen to be transferring data, as long as I am not running iTunes, or so have my iPad actually plugged in, it seems 99% of the time these iCloudServices.exe connections are just taking up ports, neither sending nor receiving any data discernable to me under the Processes with Network Activity, or Network Activity lists, both displayed in the same window as the TCP Connections in the Windows Resource Monitor.
Though I am fairly ignorant as regards coding, it seems as if there is no call to close a connection, very specifically, iCloudServices.exe, when it is no longer needed, and the next time a connection is needed, a new one is opened, rather than accessing the one previously opened. The only other reason I could imagine this might be occurring is if my Norton Internet Security software might mask and/or block the port after a certain time of inactivity.
Anyone out there have any ideas or advice about this? Thanks in advance.

Thanks jared,
I'm still dealing with this issue through Apple. Some time after I posted this, I contacted Apple again. They did start a case up for me, as I was experiencing the same behavior on two different machines, with two different versions of Windows.
So far it remains unsolved. I've logged iClouds for Windows on my desktop, which is brand new, then logged for awhile after completely uninstalling Norton Security Suite, depending on the Microsoft security for some time, and finally logged after I uninstalled iCloud for Windows, restarted, installed a clean download, and connected using a completely different test account, which Apple set up for me. None of this made any difference. Looking at the logs, it seems every 10 minutes, iCloudServices.exe creates a new TCP connection to confirm I'm using less than 5GB on iCloud, (which I am by a good margin, using less than 2GB), it seems this connection is not closed, and when the next iteration rolls around 10 minutes later, a new TCP connection is created. I come very close to having 6 TCP connections created per hour, until I restart my computer. This works out to... 6 x 24 = 144/day.
Perhaps the article you posted will shed some further light on this. I'm thinking seeing the state of the connection through netstats, at the least, could help.
For the last week, I've been putting a hold on further logging, as Apple wants me to create a new user account on one of my computers, install iCloud for Windows there, and log it running in the other account. This however basically means I cannot use my computer for a fair number of hours, and I've been busy enough with work the past week that I haven't the time or energy to afford to set this up and run it. I've had need of my computers too much for the past week.

Using parallels for windows xp on my macbook

Hello. I want to take online GIS classes from ERSI this winter and am thinking about buying parallels to run their software (which is only supported by windows xp or vista). I am basically pretty computer illiterate and am not really sure about the most cost efficient way of setting this up. I know I have to buy parallels (or bootcamp, which is better for this case?), then buy the windows software, then install and hope for no hiccups the GIS training software (which is not supported by the ERSI online team when run on a mac). Has anybody gone through this specific or related procedure before and what kind of results did you have? Is my plan sound? With my tiger operating system do I still have to buy bootcamp, is that better to use than parallels? I don't have any other plans to use windows except maybe to send photos through my hotmail account. I will greatly appreciate any advice and/or direction you can provide. Thank you,
Dave

Hi,
I use Parallels with Windows XP and it runs just fine. I need Windows for one application that is not any where to be found for Macintosh. Follow the Parallels directions for installation and you should have any problems. To use Bootcamp you would need to be running Leopard.

3d Builder connect issues using Kinnect for Windows v2

I am running Windows 8.1, have a Kinect for Windows V2 sensor connected to my USB port, and have both the latest 2.0 SDK w/ Fusion & 3D Builder app installed. I already made sure I have webcam use enabled for 3D Builder under my privacy settings. Prior
to installing the 3D Builder, I was able to produce 3D .stl files using Fusion 2.0. I installed 3D Builder and attempted a scan, but I got a "no sensor connected" message. I started up Fusion and I'm no longer getting any depth feedback from the
Kinect to build a 3D .stl model. The image area is just blank white. I tried the Kinect Studio v2.0 application & have full sensor feedback - I can see a depth map and everything. I closed Studio & Fusion and reopened 3D Builder. Was able to click
scan this time. However, even though I'm no longer getting the "no sensor" message, it's acting as though it's scanning, but it isn't... I mean, I can start & stop a scan via the scan button, but it's blank like it was in Fusion & isn't generating
any sort of 3D model. I am able to import the scans I previously made in Fusion, edit those, and export to my printer. But, that's it. Ideally, I'd like to eliminate Fusion from my workflow and just use 3D Builder. But now I'd be overjoyed just to be
able to use Fusion to scan again. Is there a conflict w/ having both the SDK & 3D Builder installed? Please advise.
Thanks - Matt

Yes, both cam & mic have permissions enabled. I haven't installed evolution on my PC. IDK if there's really a need, is there? Isn't it about the same as Kinect Studio? I mean, I see the depth map and all that... it's just not a metro app. I'll install
it when I return home if that'll help diagnose the problem.

Proplem about use IDsync for windows 1.0 to sync users accounts

Similar Messages

Maybe you are looking for