Proposal Log could not be found

HI All,
When running F110 some times system does not display proposal log.
It gives Message No. F0215. Proposal Log could not be found.
In the proposal one item is coming in exception list and sysyem said please refer proposal log to know the reason.
While log is not displayed.
Do I need to do any special setting for displaying log or why it is not displaying log.
(Some time it displays log)
Please advice.
Regards
Sanjay

Hi Sanjay
Normally the system saves the log and deletes it after 5 days from the date of its creation (the resident period could be longer/shorter depending on the settings done by Basis team)
Also ensure that the vendor numbers entered in the Paramter tab is also entered in Additional log.
After trying to display the log, Please check whether any missing authorzation in T.code SU53.
Regards

Similar Messages

Windows Patching - Error when logging in - "The Specified procedure could not be found"

Hi,
I am in the process of windows patahcing our estate with SCCM 2012 R2. All going well, except for 3 machines which have the error: "The Specified procedure could not be found" when the user logs in. I have tried to log in my self, created a new
local account (via my machine remotely), but still no luck. Have checked Event Viewer and Windows Update but cant see where it failed. Been checking the net for fixes but no luck. The machine is a Windows 7 SP1 Enterprise 32 bit, info for server if needed
is SCCM 2012 R2. I have attached the WindowsUpdate log, incase that can help? I dont want to spend ages removing previous updates (via SCCM) as I dont have the time!
Wont let me attach the windowslog!If any one can help, be great!

Hi,
Let's make clear your issue.
Did you logon these 3 computers?
Have you tried to install the Windows Update manually for these 3 computers?
If no, have a try.
If yes and the error still persists, try to
reset Windows Update components for test.
Karen Hu
TechNet Community Support

Error log 'At least one entry could not be found in object buffer' in SLG1

Hi Experts,
We are getting error log 'At least one entry could not be found in object buffer' in SLG1 transaction.
Unable to trace the source of error. Could you please help us identifying the same.
Regards,
Santosh Kacham

Hello,
the reason could be the use of order_save badi, mostly there is a wrong + faulty implementation which causes this error. Please check first if any own coding part is involved, when creating documents / tickets.
Thanks + regarsd
Rene

I cannot log into facebook. I get the following message: 404 Error - Not Found The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request,

I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.com

I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

After I updated my iPhone with IOS 6.1 my old Apple ID keeps popping up on my iPhone for me to type in the password that I no longer know. On the Apple site the Manage my Apple ID says my old Apple ID could not be found. How do I get this to stop?

I just updated my iPhone with the newest update IOS 6.1. My old Apple ID keeps popping up on my iPhone for me to type in the password that I no longer know. All the passwords I type in do not work. I no longer have access to this email which is my old Apple ID. After installing the newest software update my old Apple ID came up to finish configuring. Since I no longer have access to this Apple ID and email account and after trying some passwords I skipped the step. It then said FaceTime, iCloud (which I do not use), and more may not work. I clicked that it was OK since I could not remember the password to my old Apple ID. I then went to my settings to be sure my newer email was my Apple ID by typing in my current Apple ID and password. Also, I went to Manage my Apple ID online and my old Apple ID could not be found. Is it OK I skipped that step in the IOS 6.1 configuration? How do I get my old Apple ID to stop popping up?

Blue
It sounds like you restored from an old back-up. Did you back-up just before your software update? It will use your last one and if your last back-up was a ywear old then it will use that one.
In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
Sorry for your losses.
Cheers

Broadcasting Workbook Error | An active RFC server could not be found

Hi All,
I am facing an issue while trying to broadcast(distribute) a workbook. The broadcasting of a query from the query designer works fine. But when I try to distribute a workbook, it throws up the following error. We have used the SMTP method(Using SMTP plug-in) for broadcasting and we know that we can use RFC(Using RFC connection) too. But my question is whether RFC method is a must for workbook distribution.Kindly help me.
Thanking you,
Best Regards,
Manesh
The Error Log
Processing for user PUSHM, language EN
Processing setting
An active RFC server could not be found
Error occurred during processing of framework class CL_RSRD_PRODUCER_EXCEL, type PROD
Processing setting !TEMP_2CC00BE0E24C704991039F6E9C2AC4E4 completed with errors
Job step for user PUSHM, language EN ended with errors


Hi,
Are you using BI 7 ?
Have you configured a Precalculation server in transaction RSPRECADMIN ?
Precalculation servers are basically PC, that are used for their Excel capabilities, in order to produce up-to-date workbooks.
Best regards,
Guillaume
Message was edited by:
Guillaume GARCIA

Error - A valid installer could not be found, using AAMEE and CS6

I receive the error - A valid installer could not be found, when using AAMEE 3.0 to create a CS6 Trial Package in Windows 7. I'm following the procedure documented here - http://blogs.adobe.com/oobe/tag/cs6 Imaging CS6-Attack of the Clones. I've tried both pointing at the DVD and pointing to a local folder, after copying the DVD to a local folder and copying the \payloads folder from the second DVD. I know the DVD is valid because I did a manual installation. I'm pointing at the folder that contains the Set-up.exe file, plus I've tried pointing at every other folder as well, with no success. I have a 40 user license for CS6 Master Collection for a classroom on our campus. I need to create a image for this classroom, and was thrilled that a solution was being provided to accomodate this, but AAMEE does not work! I'm working in a Windows 7 environment.
On top of this frustration, my Adobe ID is not working, I've used "chat" support and phone support and I can still not log in. They claim it has been escalated. When I explained the AAMEE error to the phone support rep, he informed me that there was no technical support and my only option was to post the question on the forum...but you have to log in with your Adobe ID to post a question! Round and round it goes. So I had to create another ID under a different email, just to post my question. I'm getting the mystery "an error has occurred, please try again", when I try to log in with my work Adobe ID.
Help! Anyone?

RESOLVED - Thanks in part to the ALBERT-in-Vancouver and Tushar Bammi thread concerning a similar problem. I dissected the PDApp.log. I had copied the installation DVDs to a local folder per the Deployment Guide, when installing from the DVD initially failed. But, PDApp.log stated - EnterpriseNativeApplet Individual media disks on fixed volumes are not supported, please use CD/DVD or mounted ISO/DMG media. That clued me in to trying to create the MSI using the DVDs again. My fault - that the original attempts to create the MSI from the DVDs did not work, I didn't realize I needed to run AAMEE with elevated privileges. Note - the earlier attempts when I was running AAMEE with elevated privileges and pointing to the locally copied installation files, failed. Interesting. I'm confused as to why the Deployment Guide directed my to create a product-install folder...
I haven't tested the MSI file yet, but if I have additional problems I will start a new thread.
Thanks.

A server with the same hostname could not be found!

Hi macusers,
I saw that error on multiple threads but I found none related to my issue. So, before ignore it let's describe it:
Two MAC Mini: one early 2009 and second late 2010. Both OS 10.9.1, MacKeeper installed, 6+Gb for RAM. Both uses the same router to connect the internet. Both are LAN connected not WiFi. I even changed the DNS addresses on router using Google DNS.
On Mac 2009:
1. Safari opens pages randomly. Sometimes a website is not open but when I create a new tab and select the website from bookmarks the website is opened while in previous tab still says: Safari cannot find the server .... All those websites are used in my daily work. I am not reseting Safari unless necesary.
2. MAIL is showing online only Gmail acccount from 4 accounts. The rest of the accounts are not Gmail and appear as Offline. I restart MAIL and they appear online. I have to do that Open/Close MAIL several times a day.
3. Sharefile and oDesk Team application cannot be opened because of that error: A server with the same hostname could not be found!
4. Apple Store is displaying questions marks instead of the icons and I can barely see what softwares I have installed.
Now the beauty. Only on MAC 2009 I am experiencing those issues. The other MAC is fine. So far.
What I tried so far:
A. Reboot in SafeMode and Repair Permissions, Repair Disk. Everything OK.
B. PRAM Reset and SMC Reset.
C. Scan for viruses. No virus detected.
oDesk Team app is working fine on the other MAC and I managed to install it on Mac 2009 on Windows 7 partition as well. Is working fine.
Here are some screenshots showing you some of the errors I am picking on my side.
That one is taken while trying to connect to ShareFile. After three or four attempts it finally managed to connect.
That was a beauty. While MacKeeper was showing me that I am Offline, I was talking on Skype with a friend.
Still cannot access oDesk Team application. However, after several attempts it is logging but what is showing me is a real nightmare.
If I choose to see my contracts (though in the upper corner there is not my account) they do appear:
Any valuable entry will be highly appreciate it.
Warm regards,
Sebastian
P.S. I just remembered that I saw on a post in here related to the same error that someone from Apple asked a guy to make a test in terminal using a command line. I do it on my MAC and here is the result:
Message was edited by: sebdea

Hi Grant,
Here is what I did and so far seems it is wworking.
1. I deleted oDesk and ShareFile. I removed them using MacKeeper (I found this application very usefull for uninstalling applications as MacKeeper looks for them all over the computer: cache, preferences, application support etc.) While for oDesk is simple as I can look myself for oDesk in any file names, whith ShareFile was a little tricky to amke it amnually as MacKeeper find files that contain Citrix name then ShareFile. I will not guess unless I would search the internet on how to manually remove sharefile from my system.
2. I manually delete all cahe files and folders from ~Library and ~User/Library.
3. After reboot I installed Onyx and order maintanance where I checked all its options, including but not limited to DNS caches, fonts caches, everything.
4. After I reboot computer, I went in Disk Utility and Repaired permissions.
Reboot again. Now seems to work fine. At least odesk Team is working properly. I will have a second thought for installing ShareFile.
Some romanian mac users suggested to check my router connectivity and change some DNS in it. Looks like that was also a problem on some MACs. I recall the few weeks ago I had an issue with TP Link router. My computer wasn't connected to internet, though router showed that there is internet connection. I ping router from my computer and I received answer from ping. I ping google from computer, nothing. I ping google from router, was wroking. I connected the computer directly to internet without router, was wroking. When connected back through router, nothing. I contacted the guys from TP Link and they suggested to use google DNS instead of those my ISP provided. But since then I had not experienced any issue with router and internet, until now. The DNS are still those from google.
I will keep you updated if any issues are appear again. So far, it is working perfectly as it supposed to work.
Warm regards,
Sebastian

Airport Extreme/Time Capsule backup volume could not be found?

I am having problem with Time Machine. When I try to backup using Time Machine, I get an error message, " The backup volume could not be found." Strangely, Time Machine recognized the drive when setting the Time Machine preferences, but not when I backup.
If i select from the 'select disk' again and try again i get Keychain Access error 25299 and have to delete that in the Keychain for it to even get to the point of counting down to start back up
I have erased my Time Capsule recently and was starting fresh but now i cannot get time machine running again...
In the shared section of the finder the time machine backup is only appearing in the network area rather than directly there...
Any ideas?
Many thanks.

Hi there.
I would suggest First Aid of your Keychain, but that hardly ever works (especially in this situation).
What I would do first, is go to ~/Library/Keychains/, grab the login.keychain and move it to the desktop. Log out, and log back in again. If that fixes it, then get the old login.keychain from the desktop and put it in the trash. (You will lose all your saved passwords for networks etc.)
If that doesn't work, unfortunately the only option would be to do an Archive & Install.
So you just need to put your 10.6 disk in again and install over the system.
Your personal data/files should still remain intact. Although I would still suggest making a backup (ironic considering the situation)
Cheers
Taylor

The backup volume could not be found

Spent a fair amount of time on the phone with Apple last night trying to get my Macbook Air to work with Time Machine/Time Capsule.
Symptoms of my problem included Time Machine Preferences giving the error "The backup volume could not be found"
Console messages complaining about not being able to find the MAC address for machine:
(console is accessed by clicking Go -> Utilities -> Console from the Finder, and then selecting All Messages)
11/7/08 11:06:13 AM System Preferences[123] *Time Machine failed to get MAC address for machine.*
11/7/08 11:13:09 AM /System/Library/CoreServices/backupd[1603] Starting standard backup
11/7/08 11:13:09 AM /System/Library/CoreServices/backupd[1603] Network mountpoint /Volumes/Time Capsule not owned by backupd... remounting
11/7/08 11:13:09 AM kernel AFP_VFS afpfs_mount: /Volumes/Time Capsule-1, pid 1604
11/7/08 11:13:09 AM /System/Library/CoreServices/backupd[1603] Network volume mounted at: /Volumes/Time Capsule-1
11/7/08 11:13:09 AM /System/Library/CoreServices/backupd[1603] *Volume at path /Volumes/Time Capsule-1 does not appear to be the correct backup volume for this computer. (Cookies do not match)*
11/7/08 11:13:09 AM /System/Library/CoreServices/backupd[1603] Backup requested due to disk attach
11/7/08 11:13:14 AM /System/Library/CoreServices/backupd[1603] *Backup failed with error: 18*
And my only network interface was showing up as en1 (instead of en0). You can check this by using Network Utilities:
- On the Finder main menu bar click Go -> Utilities -> Network Utilities
If "Network Interface (en0)" is not an option in the drop down list under "Please select a network interface for information" (mine was showing as en1), then the following steps will probably solve your problem:
1) Enable the root user
- Open the finder
- On the Finder main menu bar click Go -> Utilities -> Directory Utility
- On the menu bar click Edit -> Enable Root User
- set a password (they suggested using the same password as is used for the main user account)
2) Login as the newly enabled root user
- Click Log Out... from the Apple menu on the main menu bar
- select "Other" at the login screen
- enter the user name "root" and the password you set in step 1
3) Drag Preferences folder to the desktop
- open the finder, and click on Macintosh HD and then Library
- drag the Preferences folder onto the desktop
4) Restart the computer
- Click Restart from the Apple menu on the main menu bar
After this, the Network utility should show "Network Interface (en0)", and Time Machine should work.

Jackson,
See this article for the reasons why you see "Time Capsule-1 does not appear to be the right volume..."
[http://discussions.apple.com/thread.jspa?messageID=8116036&#8116036]
As for the error message you are getting, here are several reasons why you would see this message...
*_"Backup Volume Could Not Be Found"_*
First, it is important to distinguish this error message from another, similar Time Machine error that states, “The backup volume could not be mounted”. This is important as the causes and cures for these two errors can be very different.
*Reselect Your Time Machine Disk*
(http://support.apple.com/kb/TS1329)
In the Finder, go up to the "Go" menu and select "Connect to Server".
Click the "Browse" button at the dialogue box.
In the Network window that opens, do you see your TM drive?
Double click it to mount the drive.
Now let's try to reselect it for Time Machine use.
Go to System Preferences --> Time Machine.
Click the "Change Disk..." button.
Select "None" and click "Stop Backing Up".
Now click "Choose Backup Disk" and reselect your drive again.
Close System Preferences and try backing-up again.
On the other hand, does your Time Machine drive NOT appear at all? Is it appearing on your desktop? If it is still connected try disconnecting the cable, waiting a few seconds and then reconnecting the cable. Does the drive mount on the desktop? Try initiating a backup now.
*Disk Fails to Wake From Sleep*
“If your external HD has a sleep function that does not wake for Time Machine backups. Time Machine will alert you that "The backup volume could not be found", and backups will not be made.” [http://support.apple.com/kb/TS1337]
*3rd-Party Disk Utilities* #
Many external hard disks come with software for maintaining/monitoring hard disk activities. It may have come on a separate CD or been installed on the drive itself. If these programs have been installed they may interfere with Time Machine backups, generate erratic behavior, or cause the drive to ‘disappear’ altogether.
You may never know these applications are there as they may be running in the background. Go to System preferences --> Accounts. Select your account in the pane on the left. Click “Login Items”. Are there any items listed there that might refer to hard disk utilities. If so remove them using the “-” button at the bottom.
*Delete Time Machine Preference .plist*
It may be that the preference list that stores the name of your designated backup disk has become corrupted.
Go to --> Macintosh HD / Library / Preferences (Note: NOT Home / Library / Preferences).
Drag the .plist file labeled,
com.apple.TimeMachine.plist
to the root level of your Macs’ hard drive.
Reboot your computer.
This .plist file is automatically recreated at startup if it is missing.
Now try choosing the external HD in the TM Prefs for backup.
*Time Capsule Has a Long Name*
“When using your Time Capsule for Time Machine backups in Mac OS X 10.5 Leopard or later, the Time Capsule backup volume may not mount and Time Machine may not be able to back up to it. This alert may appear: "Backup volume cannot be found". This can happen if the Time Capsule disk has a long name. [http://support.apple.com/kb/HT1170]
Open AirPort Utility (in /Applications/Utilities).
Click your Time Capsule's icon.
Click "Manual Setup".
Enter the password for the Time Capsule if prompted.
Click the Disks icon.
Highlight the volume name that appears under "Time Capsule Disk".
In the Name field, enter a name for the volume that is less than 27 characters long.
Click Update.
After Time Capsule restarts, on the Mac(s)using Time Machine, open Time Machine preferences and reselect the Time Capsule volume.”
Let us know if any of these suggestions help.
Cheers!

Dboraslib.dll - Error 126 : "The specified module could not be found."

Hi,
After installation XI 3.0 and adapters, the dispatcher(dispwork.exe) is failing to start in a ABAPJ2EE system (web AS 6.40).
The dev_disp trace file shows the following error:
Please do help to resolve this problem.
trc file: "dev_disp", trc level: 1, release: "640"
Mon Aug 09 12:14:43 2004
kernel runs with dp version 124000(ext=101000) (@(#) DPLIB-INT-VERSION-124000-UC)
length of sys_adm_ext is 524 bytes
ERROR => DlLoadLib: LoadLibrary(dboraslib.dll) Error 126 [dlnt.c 237]
 Error 126 = "The specified module could not be found."
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 1
intno 0
make: multithreaded, Unicode
pid 2908
***LOG Q00=> DpSapEnvInit, DPStart (00 2908) [dpxxdisp.c 1093]
 shared lib "dw_xml.dll" version 1 successfully loaded
 shared lib "dw_xtc.dll" version 1 successfully loaded
 shared lib "dw_stl.dll" version 1 successfully loaded
 shared lib "dw_gui.dll" version 1 successfully loaded
Mon Aug 09 12:14:48 2004
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3878]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2506872 (12472)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 06440040, size: 2919328)
DpShMCreate: allocated sys_adm at 06440040
DpShMCreate: allocated wp_adm at 06441B58
DpShMCreate: allocated tm_adm_list at 06444478
DpShMCreate: allocated tm_adm at 064444A0
DpShMCreate: allocated wp_ca_adm at 066A8518
DpShMCreate: allocated appc_ca_adm at 066AE2D8
DpShMCreate: allocated comm_adm_list at 066B0218
DpShMCreate: allocated comm_adm at 066B0230
DpShMCreate: allocated vmc_adm_list at 066F6F00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 066F6F28
DpShMCreate: allocated wall_adm at 066F6F30
MBUF state OFF
Mon Aug 09 12:14:49 2004
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 614 MB
<ES> 613 blocks reserved for free list.
ES initialized.
Mon Aug 09 12:14:52 2004
J2EE server info
start = TRUE
state = STARTED
pid = 3216
argv[0] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[1] = C:\usr\sap\SXI\DVEBMGS00/j2ee/os_libs/jcontrol.exe
argv[2] = pf=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1352
argv[5] = -DLISTEN_PORT=1353
argv[6] = -DSAPSYSTEM=00
argv[7] = -DSAPSYSTEMNAME=SXI
argv[8] = -DSAPMYNAME=cgnlpt036_SXI_00
argv[9] = -DSAPPROFILE=C:\usr\sap\SXI\SYS\profile\SXI_DVEBMGS00_cgnlpt036
argv[10] = -DFRFC_FALLBACK=ON
argv[11] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.0 2.0 3.1.1) [dpxxdisp.c 1455]
***LOG Q0K=> DpMsAttach, mscon ( cgnlpt036) [dpxxdisp.c 9701]
Mon Aug 09 12:14:54 2004
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 1
Release check o.K.
Mon Aug 09 12:15:33 2004
ERROR => W0 (pid 3224) died [dpxxdisp.c 12152]
ERROR => W1 (pid 3232) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3240) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3248) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3256) died [dpxxdisp.c 12152]
ERROR => W5 (pid 3264) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3272) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 3280) died [dpxxdisp.c 12152]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-3224 (SIGUSR2)
ERROR => DpWpKill(3224, SIGUSR2) failed [dpxxtool.c 2464]
killing W1-3232 (SIGUSR2)
ERROR => DpWpKill(3232, SIGUSR2) failed [dpxxtool.c 2464]
killing W2-3240 (SIGUSR2)
ERROR => DpWpKill(3240, SIGUSR2) failed [dpxxtool.c 2464]
killing W3-3248 (SIGUSR2)
ERROR => DpWpKill(3248, SIGUSR2) failed [dpxxtool.c 2464]
killing W4-3256 (SIGUSR2)
ERROR => DpWpKill(3256, SIGUSR2) failed [dpxxtool.c 2464]
killing W5-3264 (SIGUSR2)
ERROR => DpWpKill(3264, SIGUSR2) failed [dpxxtool.c 2464]
killing W6-3272 (SIGUSR2)
ERROR => DpWpKill(3272, SIGUSR2) failed [dpxxtool.c 2464]
killing W7-3280 (SIGUSR2)
ERROR => DpWpKill(3280, SIGUSR2) failed [dpxxtool.c 2464]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:43 2004
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Aug 09 06:45:43 2004
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 3224 Ended no 1 0 0
1 DIA 3232 Ended no 1 0 0
2 UPD 3240 Ended no 1 0 0
3 ENQ 3248 Ended no 1 0 0
4 BTC 3256 Ended no 1 0 0
5 BTC 3264 Ended no 1 0 0
6 SPO 3272 Ended no 1 0 0
7 UP2 3280 Ended no 1 0 0
Dispatcher Queue Statistics Mon Aug 09 06:45:43 2004
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 6 ( 66%), shm 3 ( 33%)
since last update total 9, udp 6 ( 66%), shm 3 ( 33%)
Dump of tm_adm structure: Mon Aug 09 06:45:43 2004
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Aug 09 06:45:43 2004
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:48 2004
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=3216)
killing process (3216) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiSelClear: removed hdl 3 from selectset
DpDelSocketInfo: del info for socket 3 (type=7)
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 456
NiSelClear: removed hdl 4 from selectset
DpDelSocketInfo: del info for socket 4 (type=9)
NiBufClose: clear extensions for hdl 4
NiBufSetStat: bufstat of hdl 4 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 4 / socket 448
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3172) (SOFT_KILL)
Stop icman
killing process (3196) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3172 HANDLE:472)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:49 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3172 HANDLE:472)
[DpProcDied] Process died (PID:3196 HANDLE:464)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
[DpProcDied] Process lives (PID:3216 HANDLE:440)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:50 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:51 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:52 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:53 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:54 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:56 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:57 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:58 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:15:59 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:00 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:01 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:02 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:03 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:04 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:05 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:3216 HANDLE:440)
waiting for termination of J2EE server
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Aug 09 12:16:06 2004
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:3216 HANDLE:440)
NiIMyHostName: hostname = 'cgnlpt036'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9927]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 5, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 5 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 5
NiBufSetStat: bufstat of hdl 5 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 5 / socket 368
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2908) [dpxxdisp.c 8460]
Good Bye .....

Hi,
Thanks for the reply.
dboraslib.dll is properly installed - I checked the registry and physical location of the file.
The problem was : Environment variable "Path" not being set properly for the "oracle jre".
Solution:
After setting the path, the dispatcher started to run properly without any problems.
Path=<Drive>\oracle\ora92\bin;<Drive>\Program files\Oracle\jre\1.3.1\bin; <Drive>\Program files\Oracle\jre\1.1.8\bin
FYI - We are using WIN2K with SP4 and oracle DB 9.2
Regards,
Sridhar

Error: The specified procedure could not be found

Apparently the password expired on my Windows 7 BETA installation. Upon restart the system notifies me and asks for a new password. After confirming the password I get the error:
"The specified procedure could not be found"
I cannot log in at this point. The old password won't let me in and I can't change it. The administrator account I found is disabled by default.
Is there any way to log in?

Okay, here is your dilemma.
You cannot login to your only account and the local administrator account is in its default disabled mode.
There is a solution, albeit totally unsupported. Go to http://www.sysresccd.org/Main_Page and download the latest SystemRescueCd. Burn a CD from the ISO. When you boot with the SystemRescue CD, you will type ntpass and hit <enter>. From there, make sure you read the screens. You will have make selections depending on how you loaded Windows 7 (clean vs. upgrade vs. dual boot, etc). Using this disk, you CAN enable the local administrator’s account and login in.
I just did the procedure using Windows 7, build 7000 with SystemRescueCd 1.1.6.
Good luck.

Account 'Contra account: Acquisition value' could not be found in ASKB

Hi SAP experts
1. First we have created new asset with reference old assets in As01
2. After that we have transfer all asset from old to new asset with in the company code in the ABUMN T.code in the month on 01.04.2010
3. After that we have run the deprecation for April, May and Jun. Up to this, there were no problem those periods
(now here we are following first we are running the ASKB and after that we are running AFAB)
4. now we are facing the new issue for July month while running ASKB Like Below
Account 'Contra account: Acquisition value' could not be found for Deprecation area 52
Message no. AU133
Diagnosis: When creating the accounting document, the system could not find account
'Contra account: Acquisition value' for company code 0216.
System Response
Procedure: Enter this account in the account determination for Asset Accounting.
Here in Error log it showing three account determinations 100002,100010 and 100040
5.As per my knowledge we can maintain the G/L account for account determination in the T.code AO90 for deprecation area wise but why the new error massage has come into picture.
Please let me know if you require more information about the issue
Can you any body please give me suggestion based on the issue and
Thanks and Regards
sudharshana vamsi

Hi Sridevi
Thanks for your suggestions
if i will maintain G/L account for account determination in the T.code AO90 for deprecation area wise, is there any effects for another company codes and balance sheet wise
And also we are running depreciation since 2003, now suddenly it is coming into picture in the month of July. and may i know the reason. Are there any new patches are added in sap
And also if you donu2019t mind can you tell me what are purpose to maintain the Contra G/L account in the AO90.
Thanks and Regards
sudharshana vamsi

Error AU133 Account 'Contra account: Acquisition value' could not be found

I have this error when running RAPERB2000 program in IDES ECC6.0.
I have checked AO90 and this B/S account (199990) is maintain correctly in area 64 for the account determination.
This is the job log:-
02.12.2010 23:21:41 Errors occurred during the posting run (see the log)
02.12.2010 23:21:41 Company code AA01, depreciation area 64, fiscal year 2010, account group 30000
02.12.2010 23:21:41 Account 'Contra account: Acquisition value' could not be found for area 64
02.12.2010 23:21:41 Company code AA01, depreciation area 64, fiscal year 2010, account group 40000
02.12.2010 23:21:41 Account 'Contra account: Acquisition value' could not be found for area 64
02.12.2010 23:21:41 Company code AA01, depreciation area 64, fiscal year 2010, account group 30000
02.12.2010 23:21:41 Account 'Contra account: Acquisition value' could not be found for area 64
02.12.2010 23:21:41 Document INT-000026 was created successfully for Asset Accounting
02.12.2010 23:21:41 Company code AA01, depreciation area 99, fiscal year 2010, account group 20000
02.12.2010 23:21:41 Document INT-000027 was created successfully for Asset Accounting
02.12.2010 23:21:42 Errors occurred during the posting run (see the log)
Anyone has any idea why this error occur?

Hi,
Error AU133, is generally issued from some wrong or missing customizing. The text of the error message indicates in your case that a "Account 'Contra account'" and area 64 is concerned.
1) At first, please double check if in in AO90 (or table T095) the account is maintained for area 64. Do you have not defined a contra account for acquisition value postings in the Asset Accounting Customizing settings (Transaction AO90)?
Further, check in tr. OADB if you have defined "Different Depreciation Area XX". That means area 64 takes the account determination from area xx and perhaps there it is no account defined?
If this is not the reason:
2) Execute report RACKONT1 or transaction OAK4. Account determination should be set following the rules explained in SAP note 7595. Even if some account is not directly used, the account determination has to be completed. If output from RACKONT1 is not error free, it indicates that your customizing is wrong. You might correct it with the help of note 7595.
Furthermore:
3) You have defined the account in Asset Accounting, however, it is not created in the affected company code. Check whether the account is correct and create it for the company code, if necessary.
4) You have entered an asset reconciliation account for the "Contra account: Acquisition value posting" (for example, the same account as for the "Acquisition:Acquis. and production costs" account). This is not permitted.
5) As "Contra account: Acquisition value posting" you entered an asset G/L account. If necessary change the automatic posting indicator in the G/L account master record.
Regards Bernhard

Data source CFMXBible.mdb could not be found.

Hello
I am following the book CFMXBible and I got it set up.
but in the beginning of the tutorial there is a form that is
suppose to sent the contents of my form to the db.
After I press the submit button, I get this error’
What is wrong here?
What should I do?
thanks
The web site you are accessing has experienced an unexpected
error.
Please contact the website administrator.
The following information is meant for the website developer
for debugging purposes.
Error Occurred While Processing Request
Data source CFMXBible.mdb could not be found.
Resources: · Enable Robust Exception Information to
provide greater detail about the source of errors. In the
Administrator, click Debugging & Logging > Debugging
Settings, and select the Robust Exception Information option.
· Check the ColdFusion documentation to verify that you are
using the correct syntax. · Search the Knowledge Base to find
a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1;
SV1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
Remote Address 127.0.0.1
Referrer
http://server:8500/cfmxbible/ch02/companyaddform.cfm
Date/Time 05-May-06 01:23 PM

Hello
I am following the book CFMXBible and I got it set up.
but in the beginning of the tutorial there is a form that is
suppose to sent the contents of my form to the db.
After I press the submit button, I get this error’
What is wrong here?
What should I do?
thanks
The web site you are accessing has experienced an unexpected
error.
Please contact the website administrator.
The following information is meant for the website developer
for debugging purposes.
Error Occurred While Processing Request
Data source CFMXBible.mdb could not be found.
Resources: · Enable Robust Exception Information to
provide greater detail about the source of errors. In the
Administrator, click Debugging & Logging > Debugging
Settings, and select the Robust Exception Information option.
· Check the ColdFusion documentation to verify that you are
using the correct syntax. · Search the Knowledge Base to find
a solution to your problem.
Browser Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1;
SV1; .NET CLR 1.0.3705; .NET CLR 1.1.4322)
Remote Address 127.0.0.1
Referrer
http://server:8500/cfmxbible/ch02/companyaddform.cfm
Date/Time 05-May-06 01:23 PM

Proposal Log could not be found

Similar Messages

Maybe you are looking for