Proposal of same destination storage bin as source storage bin

I am using the function module: 'L_TO_PREPARE_ITEM_INT' for finding out the destination bin. But I am getting the same storage bin of source bin for destination bin proposed thru this FM. It doesn't make any sense. How can I avoid proposal of same storage bin. Is there anything to do in configuration or any userexits can be used to avoid this problem.

Hello,
I suspect the issue is from because of Capacity Check Method. Try removing Capacity check Method. If it works fine, then, build the right capacity check method based on your need.
This should solve your problem.
Regards,
Sathish

Similar Messages

  • Problem in Source storage bin for returs

    Hi,
    i did  PGR for a returns delivery and when i tried to create TO
    for the same system is taking the source bin as 000000000 and not the delivery number. i checked  the movement type 651 where my entries are correct ie,.. in source storage type i have given 904 and checked the field " source" . 
    can any body tell me why the system is taking 00000000 as source storage bin rather than the del no............
    waiting for ur quick reply.....
    thanks

    Hi Csaba / rajasekar
    i have those requirement tupes maintained correctly.
    and further i have gone through OSS notes, it is very helpful.
    here i would like bring one more thing to ur notice that this problem i am facing intermittently and not each and everytime.
    System is picking up delivery no sometimes and some times it is not.
    Further i'll take this oppurtunity to ask u one more question ie...
    in OMLR transaction assignment of WM-IM mov types, i have not maintained 601 mov type entry ie,... the entry IMmov type 601 and WM mov type 601 with all the fields in between....but i wonder how the system is allowing me to create TO for the delivery and reverse the same...and even i can find WM mov type 601 in delivery at the time of creating this TO......pls try to anser me how the system is automatically picking this WM mov type and allowing me to create TO........
    waiting for ur response

  • Not Printing the source storage bin in the layout

    Hi Gurus
    As i am printing the layout to pick the goods for delivery, in which iam not getting the source storage bin for some deliveries only. sometimes its picking and some times not, what has been the reason behind it. i have take the help of an Ababper to check the conditions if any for that filed. but i cannot find any.
    Please help me,
    Thanks in advance,

    sorted out by setting the SPAD - Device types
    format, just added the zxxx format to this and now it is working

  • TO Error: Source HU ******* is not contained in Source storage unit *******

    Dear All,
    Our warehouse Handling Unit managed. I have created a delivery which is partially picked.
    After that when I am trying to create Transfer Order, I am getting an error "*Source HU ******* is not contained in Source storage unit ******"
    I am getting a pop up window in the name of "Enter withdrawal of Handling Units", and it is asking me to enter the Quantity to be repacked.
    I am getting this error only when I am doing Partial picking.
    How to get rid of this error. Kindly suggest.
    Regards,
    Mullairaja
    Edited by: MullaiRaja on May 26, 2011 10:47 AM

    Hello
    This can be the whole pallet have to be withdrawn from the source (flag LTAP-HOMVE is set on, 'X'), but HU picking control does not propose the source HU as the destination HU (flag LTAP-HUPIK is clear, ' '). Kindly check.
    If that is not the case then, for your reference refer following SAP notes:
    - 662020:      Processing of TO with different storage types
    - 514604:      Storage unit is not deleted when posting goods issue
    - 721901:      Errors LF-064, L3-848 while picking w/o pick-HU
    - 552073:      Message L3222 when creating transfer order with LT09
    - 505542:      Incomplete TO confirmation in Transaction LT0H & LT0I
    Thanks & Regards
    JP

  • Ip sla operations with different keys for the same destination

      Hi all,
    the customer wants to use different ip sla operations for the same destination (ip sla responder). From the first source router he uses key key1 and from the second source router he uses key key2. The ip sla responder responds only for the first router which uses the key key1.:-( Is it a normal behaviour? Can I use different keys for different ip sla operations for the same ip sla responder?
    See the configuration on the responder:
    key chain test
    key 1
      key-string 7 *key1*
    key 2
      key-string 7 *key2*
    ip sla key-chain test
    ip sla responder
    He tried to use ip sla responders on:
    Ciscu 2911
    Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.2(4)M3, RELEASE SOFTWARE (fc2)
    Cisco 881
    Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
    Thank you.
    Roman

    Thomas,
    Have a look at:
    http://www.cisco.com/en/US/docs/ios-xml/ios/sec_conn_dmvpn/configuration/15-2mt/sec-conn-dmvpn-share-ipsec-w-tun-protect.html#GUID-2B448241-FD10-4F3B-BFF8-DFD44982D235
    If you're using one tunnel source you need to use one ipsec profile, unless you're running (a) p2p tunnel which you're not in this case.
    While you MAY have some luck with sharing/unsharing among different interface I'm afarid it will not be ever mentioned as supported.
    The situation will change with upcomfing 3.10 and 3.11 IOS XE releases (and corresponding IOS releases).
    M.

  • Source Storage Type

    Hi,
    To identify pick or putaway, can i derive it from source storage type .
    For all line items, will the source storage type would be fixed and destination  changed
    Or is it possible that there can be a mix of source storage types in a single transfer order.

    I think yes !!
    Regards
    Anurag

  • Stock transfer from storage bin to another storage bin.

    Hi,
    i would like to know the method to be followed in order to transfer the materials from one storage bin to another within the warehouse and also within a storage type.
    Also i would like to know how to transfer the material from one storage type to another.

    As everyone has mentioned above, to manually create TOs to transfer stock, use LT01 w/ movement type 999. However, this method is limited to a single material at a time.
    Depending on your scenario, you may want to set up storage type replenishment - where you regularly restock a smaller warehouse location from a larger one:
    Example: Small warehouse section with customer counter service & larger warehouse where bulk items and bulk quantities are stored
    Not sure if this is your scenario or not, but here goes:
    Requirement is to use the "Large, small" picking strategy for the receiving storage type.
    Material master records in that storage type need minimum and control quantities maintained on the WH2 tab
    Run (or schedule) program RLLNACH1 to automatically create transfer requirements to transfer stock from bulk storage to the smaller storage type - and then, depending on your config, either stop as TR or automatically post os TOs.
    Good luck

  • 2x RFC server on the same destination computer?

    HI,
    I'm new to sap and i don't know much about the way a rfc server connects to a sap gateway.
    We are trying to run 2 rfc servers on the same computer. Both of them register at the same sap gateway, under diferent programID , but with the same destination.
    the programID were registered with SM59.
    One server registers himself, and the other no.
    Any ideas?

    ok, so that's what i'm doing, and it doesn't work for me: as i said, it doesn't throw any kind of Exception or anything, it's just running as if the code of the remote method do nothing.
    i have a different name for each of the servers,
    each server extends UnicastRemoteObject and implements a R.I/F, and when i do "super(port_num)" for each one of them- i give them different port numbers.
    the clients are calling the right names in the lookup
    but yet, nothig works.
    maybe it's a codebase problem?
    where should i define the codebase in such case?
    can they have each one it's own codebase?
    one (of the) thing(s) i don't fully understand about rmi, is the client port: if i have a simple client-server system on different computers, the client is "connecting out-wards" through the rmiregistry port (1099) ??
    if so, when i have 2 clients on the same computer- they'll both try to
    connect through the same port (1099) wouldn't that create a collision??

  • High Level Bin Search, before Storage Type Search

    Hi,
    Can anyone help me to guide, which user Exit/Badi, be used for searching Empty bins, before storage type search. I come to know from one of colleague below message.
    "" if you want to check the quantities on a higher level (before storage type search ), you can use the user exit "+++".""
    I am unable to understand which kind of user exit "+++".
    Background: Want to do putaway with storage type 007: Our high rack is  having space (Bins) with different capacity. One rack can have 4 type of racks.
    We want to putaway material with different bin types in one storage type.
    Regards,
    Mainsh Gupta

    Hi Vijay,
    Thanks for your quick reply. I am trying user exit given by you. Once again I would like to submit my requirements here.
    a) We have 98 racks in Warehouse.
    b) Product is Ball Bearing.
    c) Bearings are handeled in Ea, Issue and Stock unit is Ea
    d) Alternate Unit of Measure is Box, i.e. per box quantity is mentioned into Material Master.
    e) Each Rack is having 5 different type of bins.
    f) We want to fill rack from bottom to top for first rack, and then next rack.
    g) Once we do putaway for any material, each time system should pick Next empty bin, and each bin type is different.
    Case 1) If going with Storage Type 007: 
                    i) Need to maintain palletization data in Material master WM view 2.
                   ii) Can not maintain any capacity check for Capacity utilization in Material Master. Capacity is only Pallatization data.
                  iii) While creating TO, System goes for placemet of material from bottom to Top in Rack, but give similar quantity for each bin,  &  these quantities are defined from Material Master from Palletization data.
                  iv) In this case it is not checking bin capacity.
    My query:
    i)  How can we split quantity during TO Creation based on Next Empty Bin avaialbe with certain capacity and all further bins with other capacity.
    ii) Can we have different type of bins in one storage type if we are going for Storage type 007. or it is mandatory to have similar kind of bins.
    Case 2) If going for Storage type 002:
                  i) Not maintined Palletiztaion data in Material master.
                 ii) Maintining capacity check in WM View 1.
                iii) Maintained Capacity check in Bin master.
                iv) WHile careting TO , system doesnot spilt quantity for next empty bins avaialbe, Only one line item comes for whole quantities. and system throw an error.
    Message Number: Message no. L3068
    Message Details: Maximum quantity for storage bin TR-15 will be exceeded by 740.000 PC
    My query: How can we split TO quantity as per next empty bins available.
    If you will give me your contact number, I can speak to you over phone and eleborate in more details for your clear understanding my issue.
    Regards,
    Manish

  • Multiple toggle buttons to the same destination causes conflicts

    I'm trying to set up multiple toggle buttons so that a user can click on a button at any time and set the state of the dashboard. Each toggle button has a unique value (and each one has the same static value for both on and off) and I've mapped all the toggle buttons to the same destination cell. But they all seem to be competing to set the desination to their preferred value even when they're not being clicked on and, as a result, the dashboard keeps changing state in unexpected ways. Is there a fix for this?

    When you have multiple components trying to insert to the same destination cell, the front-most object wins at load time. So, if tb1, tb2, tb3 (tb3 being the front-most object) are all set to respectively insert values 1, 2, 3 to the same cell, the cell will have value 3 initially.
    Now there is an issue when objects in different groups try to insert to the same cell. The release note for FP3 implies that this problem is resolved, but I think it is not fixed completely...

  • Storage bin type and storage unit type.

    Hi,
    Can anyone explain what is the differnce between the staorage bin type which is maintaine for storage bins and the storage unit type which is maintained in material master.
    Can any one correct me that My material storage unit type is maintained in TT and the storage bin for put awayis maintained in PC (storage bin type).
    is this the right way to be adapted.
    Sunil

    Hi,
    THe storage unit type is a description of how the material is stroed in the storage bin.
    Some bins may not able to allow a full pallet due to height restrictions,but a half-pallet may fit.so warehouse can define a storage unit type that defines a half-pallet and qty of the material that can fit on that half-pallet.
    Configuration menu path:IMG-logistics Execution-Warehouse Management-master data-material-define storage unit type.
    where as storage bin is the lowest level of storage defined in the warehouse.
    With Regards,
    Jaheer.

  • Storage unit types and storage bin types  - Need

    Hi,
    i want to know what is the use of the storage unit type and storage bin type.
    thanks,
    Maxx

    Dear Maxx,
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/c6/f844694afa11d182b90000e829fbfe/frameset.htm
    Storage Bin:
    A storage type generally contains several storage spaces or slots. These are called storage bins in Warehouse Management (WM). The storage bin is the smallest available unit of space in a warehouse. The storage bin therefore describes the position in the warehouse where the goods are or can be stored.
    Since the address of a storage bin is frequently derived from a coordinate system, a storage bin is often referred to as a coordinate. The coordinate 01-02-03 for example, can refer to a storage bin in row 1, stack 2, and level 3.
    You assign each storage bin to a specific warehouse number and storage type according to its location. You must also assign each storage bin to a storage section.
    You can also define the following additional characteristics of a storage bin:
    Maximum weight
    Total capacity
    Fire containment section
    Storage bin type (for example, for small or large pallets)
    With certain stock placement strategies, the storage bin type plays a significant role in optimizing the automatic search for a storage bin in connection with the pallet type. For example, you can define the WM putaway strategy to place large industrial pallets into a specific large bin type and smaller pallets into small bins.
    Storage Unit:
    In the system, a storage unit record consists of a header and at least one material data record (quant data record).
    The header contains information which is relevant for the entire storage unit and includes the:
    Storage unit number
    Storage unit type (SUT) of the storage unit
    Storage bin in which the storage unit is currently located
    Status, which provides current information about the storage unit
    Specific information about the stock contained in a storage unit is found in the material data record. The material record is already familiar to you in the existing system as a quant data record. For SU management, this information can be managed at the storage unit level.
    The following graphics illustrate how WM handles storage bins with and without the use of storage unit management. For these examples, storage bins are displayed in which 200 boxes of red pencils and 50 boxes of blue pencils are stored. The stock is distributed on two pallets.
    Hope this will help.
    Regards,
    Naveen.

  • WM : Automatic replenishment TO for fixed bin from warious storage types

    Hi Gurus,
    We have storage type 011 - fixed Bin storage type , 022  - self Storage and 055 - High Rack Storage. Also we have set up for automatic TO creation for fixed bin in fixed bin storage type when stock falls below minimum fixed bin quantity.
    My problem is : system only creates TO when there is some stock in 055 - High Rack Storage. If there is no stock in 055 system doesn't create any TO. But there's lots of stock in 011( other than fixed bin) and 022.
    we want system to serch for 055/ 022/ 011 sequence. So if there is no stock in 055, it should go for 022 and then 011.
    Can anyone advise me on this? I will be really grateful.
    Kind Regards
    Raja Ram

    Hi,
    Can you please explain me the steps required to config the picking strategy for fixed bin replenishement?
    Thanks & Regards
    Raja Ram

  • Same Destination for Multiple Clips

    Hey Kids...
    It should be simple but I seem to be drawing a blank.
    I have, for example, 6 clips that I want to convert to Pro Res. Once I have applied the setting, how do I set the same destination, a file on an external drive for example, for all the clips all at once - as opposed to having to set the destination for each clip manually.
    I know it can be done...but I appear to be vapor locking on how to do it.
    Thanks in advance.
    MS

    Highlight all the individual encodes, (not the container the encode settings templates are a part of) once highlighted, Right click your mouse, select "Destination" in the popup menu and select the new destination from those listed, or go up to the Target menu and select the "Destination" menu and select other to create a new destination.

  • Forward two different dial numbers at the same time to the same destination

    Hello everybody,
    I need to forward two different dial numbers in the same phone (Cisco 6921) to the same destination.
    I'd change the phone if it'll be necessary.
    Forward from the end user web is not a valid posibility. It is neccesary to do this forward from the phone.
    Any idea, suggestion or testing scenario should be appreciated.
    I use CUCM 8.5
    Thanks in advance.

    you can mask the other number by using translation pattern 

Maybe you are looking for