Propose of Supply Not Found for External Requirement
Hello Experts,
I have a problem where I can't found any source of supply after proposing via button "Propose Sources of Supply" but will work for requirements come from Shopping Cart.
Somehow I found below facts after comparing requirement document created from external and shopping cart with BBP_PD :
- From req created by SC, ORDERED_PROD in table CRMD_ORDERADM_I have 40 digits format
- From req created by ext requirement, ORDERED_PROD in table CRMD_ORDERADM_I have 18 digits format
Then I created PR with external material number to avoid leading zeros difference, but the problem persist. So, ORDERED_PROD number format is not the cause.
Have anyone got the same problem? What's the solution?
Sincerely,
Ted
Hi Ted,
In standard, system stores the product ID in internal tables with
leading zeros.
You have the option to suppress the leading zeros by configuring
SPRO setting
"Define Output Format and Storage Format of Product IDs".
This is an example of systems:
You can see in BBP_PD, if you click on item, there
is a table called CRMD_ORDERADM_I. You can see that PRODUCT_SRC_SYS
for this cart is displayed as SRPCLNT100. Therefore, as setting
for leading zeros is maintained in SPRO for system SRQCLNT100 and
not SRPCLNT100, leading zeros are being displayed to end user.
Usually, when systems are copied you should replace the logical system name using transaction BDLS.
Please take a look at the following notes: 446294 and 121163.
Regarding the use of BBPSC01, check wiki content
https://wiki.wdf.sap.corp/wiki/display/PSupportSRM/Creating%27Freetext
+item%27
Kind Regards,
Edel.
Similar Messages
-
Problems with sources of supply determination for external requirements.
Hi gurus...
My scenario is SRM Classic Extended.
We have a problems with sources of supply determination for external
requirements comes from ECC. The shopping cart is created with successful
based in the purchase requisition at ECC, but when i try to make the
determination of sources of supply the system doesnt find any source of
supply.
There are a lot sources of supply creates for these parameters. The
contracts were already replicated to ECC.
This problem only occurs with external requirements comes from ECC, if i
created a shopping cart directly at SRM, using the same parameters, the
system propose the sources of supply correctly.
Is there something that we can do?? This is the normal comportment for the souces of supply?
Tks,
Gustavo NogueiraHello Gustavo Nogueira
Then it is an issue.
How are you searching the source of supply in sourcing cockpit.
Can you replicate the issue?
Let me know step by step,
as per standard SAP , source of supply data must be available for shopping carts so that buyer can assign the source of supply.
please share what source of supply you have there . -
Required component home not found for component 'oracle.as.jrf'
I am getting the above error message during unpacking a template. Below is what I have done..
First machine:
OS is Oracle Linux 64 bit version 6.4. Weblogic version 11g is installed with 2 managed servers up and running fine.
echo $MW_HOME
/u01/app/oracle/middleware
echo $WLS_HOME
/u01/app/oracle/middleware/wlserver_10.3
echo $DOM_HOME
/u01/app/oracle/middleware/user_projects/domains/ClassicDomain
Want to create another managed server on a second machine where the First machine has the Admin server..
Second machine:
OS is Oracle Linux 64 bit version 6.4. Weblogic version 11g is installed
echo $MW_HOME
/u01/app/oracle/middleware
echo $WLS_HOME
/u01/app/oracle/middleware/wlserver_10.3
echo $DOM_HOME
/u01/app/oracle/middleware/user_projects/domains/ClassicDomain
I go to the first machine and do a ./pack.sh command to create a template with a name of test.jar and it is successful. Use the -log command to see the logs.(everything is fine)
I copy the above created template test.jar to the second machine..
Than on the second machine, I do the ./unpack.sh command in the $WLS_HOME/common/bin folder and I get the following error message:
fail: read template from "/u01/app/oracle/middleware/wlserver_10.3/common/bin/test.jar"
CFGFWK-60550: Script execution aborted. The script may contain an error.
Required component home not found for component 'oracle.as.jrf' version '11.1.1.6.0'
Any ideas would really appreciate it. Both of the machines have the same weblogic installation and paths. The only difference is the amount of memory each machine has that is all.. Thank youI am getting the above error message during unpacking a template. Below is what I have done..
First machine:
OS is Oracle Linux 64 bit version 6.4. Weblogic version 11g is installed with 2 managed servers up and running fine.
echo $MW_HOME
/u01/app/oracle/middleware
echo $WLS_HOME
/u01/app/oracle/middleware/wlserver_10.3
echo $DOM_HOME
/u01/app/oracle/middleware/user_projects/domains/ClassicDomain
Want to create another managed server on a second machine where the First machine has the Admin server..
Second machine:
OS is Oracle Linux 64 bit version 6.4. Weblogic version 11g is installed
echo $MW_HOME
/u01/app/oracle/middleware
echo $WLS_HOME
/u01/app/oracle/middleware/wlserver_10.3
echo $DOM_HOME
/u01/app/oracle/middleware/user_projects/domains/ClassicDomain
I go to the first machine and do a ./pack.sh command to create a template with a name of test.jar and it is successful. Use the -log command to see the logs.(everything is fine)
I copy the above created template test.jar to the second machine..
Than on the second machine, I do the ./unpack.sh command in the $WLS_HOME/common/bin folder and I get the following error message:
fail: read template from "/u01/app/oracle/middleware/wlserver_10.3/common/bin/test.jar"
CFGFWK-60550: Script execution aborted. The script may contain an error.
Required component home not found for component 'oracle.as.jrf' version '11.1.1.6.0'
Any ideas would really appreciate it. Both of the machines have the same weblogic installation and paths. The only difference is the amount of memory each machine has that is all.. Thank you -
AIP-50143: Transaction Instance Not found for Transaction Id
Hey Guys,
We have configured a Custom Document Exchange over Generic protocol to transfer a file.
1. Internal delivery channel is 'SFTP' - Picks file
2. External delivery channel is 'SFTP' - Puts file
3. Exchange protocol - Custom document over generic
4. Translation enabled - False (Currently its turned off, but the file is xml so we may want to turn it on)
5. Validation enabled - False
We are encountering below error in B2B while processing. Can someone please help with this.
Thanks,
Phani
010.02.05 at 18:41:41:672: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setDocumentPlugin PickReqRev 1.0
2010.02.05 at 18:41:41:672: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setDocumentPlugin info : Cremul version D96A
2010.02.05 at 18:41:41:672: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setDocumentPlugin info : EDIPHARM version 1.0
2010.02.05 at 18:41:41:672: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setDocumentPlugin info : PickReqRev version 1.0
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setExchangePlugin Generic version 1.0
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:setExchangePlugin info : Genericversion 1.0
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage translated payload =
oracle.tip.adapter.b2b.message.MessageStorage@140fee
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage msg.isSignalMsg() = false
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage Call Outgoing Response Processor
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Response:Response:outgoingResponse Enter
2010.02.05 at 18:41:41:673: Thread-26: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Response:Response:outgoingResponse Update the Request-Response Table Row for RefertoRequestMessageID with message state Processing Outgoing Response
2010.02.05 at 18:41:41:676: Thread-26: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:null
2010.02.05 at 18:41:41:677: Thread-26: BusinessLogicLayer - (DEBUG) Push Stack: queryBusinessTransactionInstance
2010.02.05 at 18:41:41:693: Thread-26: BusinessLogicLayer - (DEBUG) Pop Stack: queryBusinessTransactionInstance
2010.02.05 at 18:41:41:694: Thread-26: B2B - (ERROR) Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.collaboration.B2BWFEventManager.handleException(B2BWFEventManager.java:478)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.getTransactionInstance(CollabCatalogAccessor.java:364)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.setTransactionState(CollabCatalogAccessor.java:283)
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:871)
at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3249)
at oracle.tip.adapter.b2b.msgproc.Response.outgoingResponse(Response.java:905)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1170)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
at oracle.tip.transport.basic.sftp.SFTPProcessor.processMessage(SFTPProcessor.java:188)
at oracle.tip.transport.basic.sftp.SFTPMonitor.processMessage(SFTPMonitor.java:351)
at oracle.tip.transport.basic.sftp.SFTPMonitor.run(SFTPMonitor.java:304)
2010.02.05 at 18:41:42:001: Thread-26: B2B - (DEBUG) Engine:notifyApp Enter
2010.02.05 at 18:41:42:014: Thread-26: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0A140A0E126A1276F45000001AD6B570</b2bMessageId>
<errorCode>AIP-50014</errorCode>
<errorText>General Error</errorText>
<errorDescription>
<![CDATA[Machine Info: (fcgemappdev04)
Description: General Error
StackTrace:
Error -: AIP-50014: General Error: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1213)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
at oracle.tip.transport.basic.sftp.SFTPProcessor.processMessage(SFTPProcessor.java:188)
at oracle.tip.transport.basic.sftp.SFTPMonitor.processMessage(SFTPMonitor.java:351)
at oracle.tip.transport.basic.sftp.SFTPMonitor.run(SFTPMonitor.java:304)
Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3252)
at oracle.tip.adapter.b2b.msgproc.Response.outgoingResponse(Response.java:905)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1170)
... 4 more
Caused by: Error -: AIP-50025: Repository error : Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:874)
at oracle.tip.adapter.b2b.msgproc.DbAccess.updateReqRespState(DbAccess.java:3249)
... 6 more
Caused by: Error -: AIP-50143: Transaction Instance Not found for Transaction Id "null"
at oracle.tip.adapter.b2b.collaboration.B2BWFEventManager.handleException(B2BWFEventManager.java:478)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.getTransactionInstance(CollabCatalogAccessor.java:364)
at oracle.tip.adapter.b2b.collaboration.CollabCatalogAccessor.setTransactionState(CollabCatalogAccessor.java:283)
at oracle.tip.adapter.b2b.collaboration.CollaborationManager.setTransactionState(CollaborationManager.java:871)
... 7 more
]]>Hi Phani,
What is the naming convention you are using at IDC? If you are sending the response to your TP, then make sure to send ReplyToMsgId as part of file name. If it is not a response, then send MessageType as 1 as part of file name.
For file naming convention required, please refer -
http://www.oracle.com/technology/products/integration/b2b/pdf/B2B_TN_010_Transport_File_FTP_Internal.pdf
Regards,
Anuj -
Hi Experts,
I'm implementing SAP note 1990492 which requires manual implementation. Implementation includes modifying standard tables (i.e. append
the structure FIEU_S_APP_H to table FIEUD_FIDOC_H). After this I've adjusted the table in SE14 (Database Utility). I've done checks in SE14 and it shows the table is consistent.
But during DB02 -> Space folder -> Single table analysis -> Input table name -> Indexes tab -> Upon clicking statistics, there is a warning "Column statistics not found for table".
Our basis team is implementing an Add-On in the development system related to RWD Context Sensitive Help. They cannot proceed due to the following inconsistencies found in the table.
Screenshot error from the activity:
Screenshot from DB02:
I'm an ABAP developer and have no other ideas on what to do. Thanks in Advanced.Hi All,
We were able to fix the issue through the following:
1. Call transaction
SE14.
2. Enter the name of
the table and choose "Edit".
3. Choose
"Indexes".
4. Select the index
and choose "Choose (F2)".
5. If you choose
"Activate and adjust", the system creates the index again and it is
consistent.
6. Check the object
log of this activation.
7. If an error
occurs, eliminate the cause and reactivate the index. -
Trading partner agreement not found for the given input values
Hi,
I am working on EDI X12 over generic exchange outbound.
In enqueue script:
replyToMsgID =
from =TEE
to =RF
actionName =BASFEDI841
doctypeName =841
doctypeRevision =4010
msgType =1
payload =RF_841_4010_1_12.xml
attachment=
I am getting the Trading partner agreement not found.
B2B log:
***** REQUEST MESSAGE *****
Exchange Protocol: Generic Version 1.0
Transport Protocol: FTP
Unique Message ID: TEE_2009Mar01_15_37_29_170.dat
Trading Partner: RF
Message Signed: No
Payload encrypted: No
Information incomplete
2009.03.01 at 15:37:29:477: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage Exit
2009.03.01 at 15:37:29:477: Thread-20: B2B - (DEBUG) DBContext commit: Enter
2009.03.01 at 15:37:29:477: Thread-20: B2B - (DEBUG) DBContext commit: Leave
2009.03.01 at 15:37:29:478: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Exit
2009.03.01 at 15:37:32:910: Thread-21: B2B - (DEBUG)
Protocol = FTP
Version = 1.0
Transport Header
filename:TEE_2009Mar01_15_37_29_170.dat
filesize:7787
file_ext:dat
fullpath://users/dab2b01/RF841/TEE_2009Mar01_15_37_29_170.dat
timestamp:1970-01-01T00:00:00.000-00:00
2009.03.01 at 15:37:32:973: Thread-21: B2B - (DEBUG) DBContext beginTransaction: Enter
2009.03.01 at 15:37:32:974: Thread-21: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2009.03.01 at 15:37:32:974: Thread-21: B2B - (DEBUG) DBContext beginTransaction: Leave
2009.03.01 at 15:37:32:974: Thread-21: B2B - (DEBUG) InterfaceListener:onMessage - Invoke inbound callout - null - null
2009.03.01 at 15:37:32:975: Thread-21: B2B - (DEBUG) InterfaceListenersyncAckEBMSchecking header names
2009.03.01 at 15:37:32:975: Thread-21: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Enter
2009.03.01 at 15:37:32:998: Thread-21: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertNativeEvtTblRow(2 params) Exit
2009.03.01 at 15:37:32:999: Thread-21: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.InterfaceListener:onMessage sendEventtrue
2009.03.01 at 15:37:33:005: Thread-21: B2B - (DEBUG) DBContext commit: Enter
2009.03.01 at 15:37:33:011: Thread-21: B2B - (DEBUG) DBContext commit: Transaction.commit()
2009.03.01 at 15:37:33:011: Thread-21: B2B - (DEBUG) DBContext commit: Leave
2009.03.01 at 15:37:33:012: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Enter
2009.03.01 at 15:37:33:013: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Enter
2009.03.01 at 15:37:33:013: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2009.03.01 at 15:37:33:013: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Leave
2009.03.01 at 15:37:33:014: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processEvents Enter
2009.03.01 at 15:37:33:014: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processEvents begin transaction
2009.03.01 at 15:37:33:015: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Enter
2009.03.01 at 15:37:33:015: Thread-20: B2B - (DEBUG) DBContext beginTransaction: Leave
2009.03.01 at 15:37:33:015: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleMessageEvent Enter
2009.03.01 at 15:37:33:015: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:incomingContinueProcess Enter
2009.03.01 at 15:37:33:015: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:getWireMessage Enter
2009.03.01 at 15:37:33:019: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:getWireMessage Exit
2009.03.01 at 15:37:33:020: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:formTransportMessage Enter
2009.03.01 at 15:37:33:027: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:formTransportMessage Exit
2009.03.01 at 15:37:33:028: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Enter
2009.03.01 at 15:37:33:042: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Identify Business Protocol
2009.03.01 at 15:37:33:042: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Do Unpack using the BP specific package class
2009.03.01 at 15:37:33:043: Thread-20: B2B - (DEBUG) MimePackaging:unpack:Enter
2009.03.01 at 15:37:33:043: Thread-20: B2B - (DEBUG) MimePackaging:doUnpack:Enter
2009.03.01 at 15:37:33:044: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Enter
2009.03.01 at 15:37:33:044: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:encoding = UTF-8
2009.03.01 at 15:37:33:045: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:oracle.tip.adapter.b2b.packaging.Component@8a2023
2009.03.01 at 15:37:33:045: Thread-20: B2B - (DEBUG) MimePackaging:unpackNonMimeMessage:Exit
2009.03.01 at 15:37:33:046: Thread-20: B2B - (DEBUG) MimePackaging:unpack:Exit
2009.03.01 at 15:37:33:046: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Decode the Incoming Message into B2B Message
2009.03.01 at 15:37:33:046: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Enter
2009.03.01 at 15:37:33:046: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Number of Components = 1
2009.03.01 at 15:37:33:047: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage Transport Protocol = {FTP}
2009.03.01 at 15:37:33:047: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage filename = TEE_2009Mar01_15_37_29_170.dat
2009.03.01 at 15:37:33:048: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage FILE_FORMAT = FROM_PARTY - TEE
2009.03.01 at 15:37:33:048: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage File TP Host name = TEE
2009.03.01 at 15:37:33:048: Thread-20: B2B - (DEBUG) calling setInitiatingPartyId() changing from null to TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:048: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:decodeIncomingMessage fromParty = TEE
2009.03.01 at 15:37:33:048: Thread-20: B2B - (DEBUG) calling setFromPartyId() changing from null to TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:049: Thread-20: B2B - (DEBUG) calling setToPartyId() changing from null to TPName: null Type: null Value: null
2009.03.01 at 15:37:33:049: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage security info NULL
2009.03.01 at 15:37:33:056: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.exchange.generic.GenericExchangePlugin:GenericExchangePlugin:decodeIncomingMessage Exit
2009.03.01 at 15:37:33:056: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage Enter
2009.03.01 at 15:37:33:056: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage toTP null
2009.03.01 at 15:37:33:057: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage hubUrl null
2009.03.01 at 15:37:33:057: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processHubMessage Exit
2009.03.01 at 15:37:33:057: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage ProtocolCollabId = null
2009.03.01 at 15:37:33:057: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage CollaborationName null
2009.03.01 at 15:37:33:057: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate Enter
2009.03.01 at 15:37:33:058: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate check non-RosettaNet Message
2009.03.01 at 15:37:33:060: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:checkDuplicate Exit
2009.03.01 at 15:37:33:060: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage Protocol Collaboration Id : null
2009.03.01 at 15:37:33:060: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument Enter
2009.03.01 at 15:37:33:063: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:preProcessor enter
2009.03.01 at 15:37:33:064: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:preProcessor edi = X12
2009.03.01 at 15:37:33:064: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:preProcessor segment delimiter is 27
2009.03.01 at 15:37:33:073: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument preprocess result =
ISA~00~Authorizat~00~Security I~01~Interchange Sen~01~Interchange Rec~090301~1935~U~00401~000001101~0~I~+'GS~SP~Application Sen~Application Rec~20090301~1537~1101~T~004010'ST~841~5709'SPI~00~01~Reference Identification~Entity Title~Entity Purpose~A~00~01~00~10~Source Subquali~773~1~AA~0001'RDT~A~Revision Value~001~~~01'RDT~A~Revision Value~001~~~01'RDT~A~Revision Value~001~~~01'RDT~A~Revision Value~001~~~01'NTE~AAA~Description'X1~C~Export Licen~C~~1~1~COU~SCHEDULE B~D~252876~59154.0269~A~01~8~U~Identification Code'X2~Import License Number~~20090301~~20090301~20090301'X7~Free-Form Message~Free-Form Message'AMT~1~1~C'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'DTM~001~~~01~CC~Date Time Period'PER~1A~Name~AA~Communication Number~AA~Communication Number~AA~Communication Number~Contact Inquiry Refe'N1~01~Name~1~Identification Code~01~01'N2~Name~Name'N3~Address Information~Address Information'N4~City Name~ST~POSTAL CODE~COU~A~Location Identifier'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'PER~1A~Name~AA~Communication Number~AA~Communication Number~AA~Communication Number~Contact Inquiry Refe'HL~1~~1~0'SPI~00~01~Reference Identification~Entity Title~Entity Purpose~A~00~01~00~10~Source Subquali~4~1~AA~0001'RDT~A~Revision Value~001~~~01'PRR~Assigned Identificat~10~Source Subquali~BRK~Description~10~Source Subquali~A~10~Source Subquali~1'PRT~EXC~10~Source Subquali~N'PRS~1~Description'LIN~Assigned Identificat~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID'PER~1A~Name~AA~Communication Number~AA~Communication Number~AA~Communication Number~Contact Inquiry Refe'MSG~Free-Form Message Text~AA~3'N1~01~Name~1~Identification Code~01~01'N2~Name~Name'N3~Address Information~Address Information'N4~City Name~ST~POSTAL CODE~COU~A~Location Identifier'PER~1A~Name~AA~Communication Number~AA~Communication Number~AA~Communication Number~Contact Inquiry Refe'N9~01~Reference Identification~Free-form Description~~~01~01+Reference Identification+01+Reference Identification+01+Reference Identification'PID~F~01~10~Product Desc~Description~1S~Source Subquali~N~LAN'PKD~AMM01~Source Subquali~10~Packagi~L'QTY~01~1~01+3+60.42665+01+5+3+01+1+51887.5+01+6+7.79+01+2+3953.97808'MEA~9L~1~6~01+5+56318.8+01+1+30.72+01+1+1+01+7+8887.19467+01+6+661.97698~6~7~01~~1S~BM'MEA~9L~1~5~01+3+696.4+01+4+4+01+3+1221.27922+01+1+994232.001+01+3+872.859~3~9~01~~1S~BM'MEA~9L~1~3~01+8+8+01+1+7.75+01+2+6.395+01+1+2.1+01+6+7.59~6~4~01~~1S~BM'MEA~9L~1~6~01+6+7393.71+01+3+54258.8579+01+8+28012.940+01+5+8+01+7+8.8~9~9~01~~1S~BM'MEA~9L~1~8~01+5+8661152.98+01+7+6356848.72+01+7+1010847.39+01+5+4939.33859+01+3+7.84050~8~4~01~~1S~BM'UIT~01+7+8.3+01+2+8.702047+01+8+323.16049+01+8+40699.4+01+5+30.909~1~AA'LOC~01~Reference Identification~Description~Reference Identification~Catego~01~Reference Identification~Description~Reference Identification~6~01+7+257.30155+01+1+963640.085+01+1+9.42+01+4+1+01+3+67.61~8~01+6+3.6+01+2+20.5+01+4+6.99+01+7+5+01+5+213.507492~5~01+2+3077486.5+01+7+78023.621+01+3+6.74+01+7+138554.0+01+3+4111.4~2~01+9+2.6+01+8+91290.0173+01+9+1.9+01+2+6.168+01+1+26.9~2~01+2+1+01+6+67348.246+01+4+8.50+01+7+37.63+01+5+130691508.0~1~01+5+8.39+01+1+2.0+01+6+7.3+01+5+173.68084+01+5+550.4928~01~Reference Identification~Description'PWK~01~1~26~01~1~Identification Code~Description~1+1+1+1+1~AR'PKG~F~01~10~Packagi~Description~01'MEA~9L~1~6~01+9+99.2217+01+5+6.5043+01+8+30.76+01+9+3+01+1+7~3~2~01~~1S~BM'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'DTM~001~~~01~CC~Date Time Period'PER~1A~Name~AA~Communication Number~AA~Communication Number~AA~Communication Number~Contact Inquiry Refe'LX~6'LIN~Assigned Identificat~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID~A1~Product/Service ID'TMD~01~10~Product Desc~01~01~Description~~Reference Identification~Source Subquali'MEA~9L~1~4~01+7+71.1+01+2+277.0+01+2+9.19003+01+1+901.516+01+3+7803582.87~8~7~01~~1S~BM'PSD~01~01~9661549~01+2+140318.0112+01+3+30.74740+01+9+67.17+01+7+5.1130+01+3+56743.0~01~01~01~Description'SPS~193487350~66823328~472426~5.6~01+3+519.45554+01+6+145146.03+01+2+63994262.5+01+3+1.3166+01+8+4.7~440443'DTM~001~~~01~CC~Date Time Period'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'EFI~00~Free-Form Message Text~9A~Version Identifier~Program Identifier~Version Identifier~Interchange Format~Version Identifier~Compression Technique~A0~File Name~Bloc~7~84410~Version Identifier~ASB'BIN~3~hii'CID~1~01~10~Product Desc~Description~Source Subquali~N'UIT~01+6+940.5+01+3+4.7+01+9+3.1+01+6+58.1+01+2+115728.9010~3~AA'TMD~01~10~Product Desc~01~01~Description~~Reference Identification~Source Subquali'PSD~01~01~595~01+1+5.139+01+3+1+01+5+4+01+5+19.1+01+5+3441.57231~01~01~01~Description'CSS~GC~01+1+33832819.6+01+1+1.5332+01+5+1.1+01+1+12173.83+01+5+813.282453~874~27~1~2~38'SPS~9~1154210~75~9.5~01+2+473.9+01+5+28.394421+01+6+755.69932+01+3+8407.2+01+3+1~54261910'MSG~Free-Form Message Text~AA~66511'MEA~9L~1~3~01+6+4.979+01+8+60.167241+01+8+48.03003+01+1+1.6086+01+5+2417168.92~3~1~01~~1S~BM'DTM~001~~~01~CC~Date Time Period'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'STA~01~9~01+6+66133.5+01+1+1+01+6+45813032.4+01+3+3329.6+01+7+63878.29~1~9L~3~5~01'DTM~001~~~01~CC~Date Time Period'REF~01~Reference Identification~Description~01+Reference Identification+01+Reference Identification+01+Reference Identification'CRF~01+6+7050.3+01+3+892.07605+01+6+847.7520+01+7+4+01+4+1.7~59.926'LS~CID'CID~1~01~10~Product Desc~Description~Source Subquali~N'MEA~9L~1~1~01+2+316324.35+01+8+852.8+01+7+4.2+01+8+6.3+01+7+9.3~2~4~01~~1S~BM'STA~01~6~01+2+751.60984+01+2+5+01+7+60.63+01+3+5366069.5+01+7+1.891~1~9L~1~8~01'LE~CID'EFI~00~Free-Form Message Text~9A~Version Identifier~Program Identifier~Version Identifier~Interchange Format~Version Identifier~Compression Technique~A0~File Name~Bloc~2~64~Version Identifier~ASB'BIN~3~hii'SE~91~5709'GE~1~1101'IEA~1~000001101'.... b2b.log:
2009.03.01 at 15:37:33:077: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl Enter
2009.03.01 at 15:37:33:078: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl validateEnvelope = false
2009.03.01 at 15:37:33:078: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:ISelectorImpl Leave
2009.03.01 at 15:37:33:078: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Enter
2009.03.01 at 15:37:33:079: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:cloneSelector Return = oracle.tip.adapter.b2b.document.edi.ISelectorImpl@43da1b
2009.03.01 at 15:37:33:085: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Param Name = SeverityConfig
2009.03.01 at 15:37:33:085: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.ISelectorImpl:getValue Value = null
2009.03.01 at 15:37:33:107: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeSenderID Val = Interchange Sen
2009.03.01 at 15:37:33:108: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeSenderQual Val = 01
2009.03.01 at 15:37:33:108: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode standard = X12
2009.03.01 at 15:37:33:108: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeReceiverID Val = Interchange Rec
2009.03.01 at 15:37:33:109: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeControlVersion Val = 00401
2009.03.01 at 15:37:33:109: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode ISA Key = InterchangeReceiverQual Val = 01
2009.03.01 at 15:37:33:109: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode Group Key = GroupSenderID Val = Application Sen
2009.03.01 at 15:37:33:110: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode X12 Doc Revision : 004010
2009.03.01 at 15:37:33:110: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode X12 Doc Revision : 4010
2009.03.01 at 15:37:33:110: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode Group Key = GroupReceiverID Val = Application Rec
2009.03.01 at 15:37:33:110: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode Transaction Count = 1
2009.03.01 at 15:37:33:111: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:processNode DocType = 841
2009.03.01 at 15:37:33:111: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeReceiverQual = 01
2009.03.01 at 15:37:33:112: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeSenderID = Interchange Sen
2009.03.01 at 15:37:33:112: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeReceiverID = Interchange Rec
2009.03.01 at 15:37:33:112: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter GroupReceiverID = Application Rec
2009.03.01 at 15:37:33:112: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeControlVersion = 00401
2009.03.01 at 15:37:33:113: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter GroupSenderID = Application Sen
2009.03.01 at 15:37:33:113: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:traceParameters Parameter InterchangeSenderQual = 01
2009.03.01 at 15:37:33:113: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin:identifyIncomingDocument exit
2009.03.01 at 15:37:33:113: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate Enter
2009.03.01 at 15:37:33:113: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate msginfo reftomsgid is null, nothing to correlate
2009.03.01 at 15:37:33:114: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Correlation:incomingCorrelate Exit
2009.03.01 at 15:37:33:114: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage number of b2b messages 1
2009.03.01 at 15:37:33:114: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:processIncomingMessage msgtype = 1
2009.03.01 at 15:37:33:115: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processIncomingTPA() Begin TPA Processing..
2009.03.01 at 15:37:33:115: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (before calling processParty) :
initial : null
from : TPName: TEE Type: null Value: null
to : TPName: null Type: null Value: null
final : null
initiating : TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:115: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() direction is incoming
2009.03.01 at 15:37:33:115: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() calling processparty with : TPName: null Type: null Value: null
2009.03.01 at 15:37:33:116: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:processParty() Begin..
2009.03.01 at 15:37:33:119: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() after calling processparty : TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:119: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() PARTIES (after calling processParty):
initial : null
from : TPName: TEE Type: null Value: null
to : TPName: TEE Type: null Value: null
final : null
initiating : TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:120: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() docTypeName: 841 docTypeRevision: 4010
2009.03.01 at 15:37:33:127: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() actionName: BARFEDI841 actionRevision: 1.0
2009.03.01 at 15:37:33:127: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.RepoDataAccessor:getCollaborationDetails() Begin.. Activity Name : BARFEDI841 Activity Version: 1.0
2009.03.01 at 15:37:33:131: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() eventName:<BARFEDI841>
2009.03.01 at 15:37:33:131: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() messageType:1
2009.03.01 at 15:37:33:136: Thread-20: B2B - (DEBUG) calling setMode() changing from -1 to 2
2009.03.01 at 15:37:33:137: Thread-20: B2B - (DEBUG) calling setInitiatingPartyId() changing from TPName: TEE Type: null Value: null to TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:137: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() cpaID=null
2009.03.01 at 15:37:33:137: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() TPA Name : null
2009.03.01 at 15:37:33:137: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAProcessor:processTPA() TPA Name : null
2009.03.01 at 15:37:33:138: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA() Begin..
2009.03.01 at 15:37:33:138: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.tpa.TPAIdentifier:identifyTPA()
From Party -> null-null-TEE-null To Party -> null-null-TEE-null Business Action name -> BARFEDI841
2009.03.01 at 15:37:33:138: Thread-20: B2B - (DEBUG) RepoDataAccessor:getAgreementNameByBaTPName() Begin..
2009.03.01 at 15:37:33:138: Thread-20: B2B - (DEBUG) RepoDataAccessor:getAgreementNameByBaTPName() fromParty: TPName: TEE Type: null Value: null toParty: TPName: TEE Type: null Value: null initiatingParty: TPName: TEE Type: null Value: null
2009.03.01 at 15:37:33:139: Thread-20: B2B - (DEBUG) RepoDataAccessor:getAgreementNameByBaTPName() SELECT ag.name FROM TIP_BusinessAction_ra ba1, TIP_Party_ra tp1, TIP_BusinessAction_ra ba2, TIP_Party_ra tp2, TIP_SupportedBusinessAction_ra sba1, TIP_SupportedBusinessAction_ra sba2, TIP_Participant_ra tpp1, TIP_Participant_ra tpp2, TIP_Agreement_ra ag WHERE tp1.name = ? AND ba1.name = ? AND ba1.revision = ? AND sba1.isinitiator = ? AND tpp1.agreement = ag.ID AND tpp1.supportedbusinessaction = sba1.ID AND sba1.tradingpartner = tp1.ID AND sba1.businessaction = ba1.ID AND tp2.name = ? AND ba2.name = ? AND ba2.revision = ? AND sba2.isinitiator = ? AND tpp2.agreement = ag.ID AND tpp2.supportedbusinessaction = sba2.ID AND sba2.tradingpartner = tp2.ID AND sba2.businessaction = ba2.ID AND tpp1.agreement = tpp2.agreement AND ((ag.effectivefromdate <= SYSDATE) OR (ag.effectivefromdate IS NULL)) AND ((ag.effectivetodate +1 >= SYSDATE) OR (ag.effectivetodate IS NULL))
2009.03.01 at 15:37:33:139: Thread-20: B2B - (DEBUG) RepoDataAccessor:getAgreementNameByBaTPName() bind vars: TEE,BARFEDI841,1.0,Y,TEE,BARFEDI841,1.0,N
2009.03.01 at 15:37:33:145: Thread-20: B2B - (ERROR) Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate
at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementNameByBaTPName(RepoDataAccessor.java:2345)
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:186)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:587)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processIncomingTPA(TPAProcessor.java:238)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1832)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2573)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2443)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2398)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
2009.03.01 at 15:37:33:145: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: processIncomingMessage B2BDE
2009.03.01 at 15:37:33:146: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Enter
2009.03.01 at 15:37:33:146: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Enter
2009.03.01 at 15:37:33:146: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Error message is Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate
2009.03.01 at 15:37:33:146: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired Enter
2009.03.01 at 15:37:33:147: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired {filename=TEE_2009Mar01_15_37_29_170.dat, filesize=7787, file_ext=dat, fullpath=//users/dab2b01/RF841/TEE_2009Mar01_15_37_29_170.dat, timestamp=1970-01-01T00:00:00.000-00:00}
2009.03.01 at 15:37:33:147: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: isFARequired returning false
2009.03.01 at 15:37:33:147: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException FA not required
2009.03.01 at 15:37:33:148: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Error Message: Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate
2009.03.01 at 15:37:33:148: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Enter
2009.03.01 at 15:37:33:149: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Wire message found
2009.03.01 at 15:37:33:149: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new b2berror object
2009.03.01 at 15:37:33:149: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState enum0 not null
2009.03.01 at 15:37:33:149: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message error information
2009.03.01 at 15:37:33:155: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message protocol message id
2009.03.01 at 15:37:33:171: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating wire message payload storage
2009.03.01 at 15:37:33:182: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Creating new business message
2009.03.01 at 15:37:33:182: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow Enter
2009.03.01 at 15:37:33:189: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty name TEE
2009.03.01 at 15:37:33:189: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow toparty type and value nullnull
2009.03.01 at 15:37:33:196: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:insertMsgTblRow BusinessAction for the given name BARFEDI841 BusinessAction_0E95
2009.03.01 at 15:37:33:207: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Updating business message error information
2009.03.01 at 15:37:33:217: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateWireBusinessToErrorState Exit
2009.03.01 at 15:37:33:218: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updating Native Event Tbl Row
2009.03.01 at 15:37:33:218: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:DbAccess:updateNativeEvtTblRow Enter
2009.03.01 at 15:37:33:220: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:updateNativeEvtTblRow msgInfo.id = TEE_2009Mar01_15_37_29_170.dat@0A4DBD5D11FC2AEDA770000018E26600
2009.03.01 at 15:37:33:220: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.DbAccess:
** DbAccess:updateNativeEvtTblRow:tip_wireMsg protocolCollabID = null
2009.03.01 at 15:37:33:226: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException notifying App
2009.03.01 at 15:37:33:226: Thread-20: B2B - (DEBUG) Engine:notifyApp Enter
2009.03.01 at 15:37:33:232: Thread-20: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0A4DBD5D11FC2AEDA680000018E265F0</b2bMessageId>
<errorCode>AIP-50547</errorCode>
<errorText>Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate</errorText>
<errorDescription>
<![CDATA[Machine Info: (dgia21a.TEEis.com)
Description: Unable to identify the trading partner agreement from the given input values. Also verify agreement effectiveToDate
StackTrace:
Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate
at oracle.tip.adapter.b2b.tpa.RepoDataAccessor.getAgreementNameByBaTPName(RepoDataAccessor.java:2345)
at oracle.tip.adapter.b2b.tpa.TPAIdentifier.identifyTPA(TPAIdentifier.java:186)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:587)
at oracle.tip.adapter.b2b.tpa.TPAProcessor.processIncomingTPA(TPAProcessor.java:238)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1832)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:2573)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:2443)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:2398)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:527)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:374)
at java.lang.Thread.run(Thread.java:534)
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2009.03.01 at 15:37:33:244: Thread-20: B2B - (DEBUG) Engine:notifyApp Exit
2009.03.01 at 15:37:33:244: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleInboundException Updated the Error Message Successfully: Error -: AIP-50547: Trading partner agreement not found for the given input values: From party[NAME] "TEE", To party[NAME] "TEE", Business action name "BARFEDI841"; also verify agreement effectiveToDate
2009.03.01 at 15:37:33:245: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:XXX: handleInboundException Exit
2009.03.01 at 15:37:33:245: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleExceptionBeforeIncomingTPA Exit
2009.03.01 at 15:37:33:245: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:incomingContinueProcess Exit
2009.03.01 at 15:37:33:245: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:handleMessageEvent Exit
2009.03.01 at 15:37:33:245: Thread-20: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processEvents Exit
2009.03.01 at 15:37:33:246: Thread-20: B2B - (DEBUG) DBContext commit: Enter
2009.03.01 at 15:37:33:263: Thread-20: B2B - (DEBUG) DBContext commit: Transaction.commit()
2009.03.01 at 15:37:33:263: Thread-20: B2B - (DEBUG) DBContext commit: Leave
2009.03.01 at 15:37:33:264: Thread-20: B2B - (DEBUG) oracle.tip.adapter.b2b.data.MsgListener:onMessage Exit -
Struts class not found for war file
Hello,
I am tring to deploy my struts web application in weblogic 8.1. I have all the
library files in web-inf\lib directory. It gave me the error that class not found
for some class in struts library. The console also told me the classpath. But
I can use javap to find the class using the same classpath. Could any one point
me some direction what I am doing wrong here.
Thanks.
Here is the error message:
java.lang.NoClassDefFoundError: org/apache/commons/beanutils/Converter.>
<Nov 13, 2003 11:05:29 AM EST> <Error> <HTTP> <BEA-101216> <Servlet: "action"
fa
iled to preload on startup in Web application: "voppocWebApp".
javax.servlet.ServletException: [HTTP:101250][ServletContext(id=9921725,name=vop
pocWebApp,context-path=/voppocWebApp)]: Servlet class org.apache.struts.action.A
ctionServlet for servlet action could not be loaded because a class on which it
depends was not found in the classpath C:\bea\weblogic81\server\bin\myserver\upl
oad\voppocWebApp.war;C:\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\extrac
t\myserver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF\lib\activation30425.jar;C:
\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\extract\myserver_voppocWebApp
_voppocWebApp\jarfiles\WEB-INF\lib\commons-beanutils30426.jar;C:\bea\weblogic81\
server\bin\.\myserver\.wlnotdelete\extract\myserver_voppocWebApp_voppocWebApp\ja
rfiles\WEB-INF\lib\commons-collections30427.jar;C:\bea\weblogic81\server\bin\.\m
yserver\.wlnotdelete\extract\myserver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF
\lib\commons-digester30428.jar;C:\bea\weblogic81\server\bin\.\myserver\.wlnotdel
ete\extract\myserver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF\lib\commons-file
upload30429.jar;C:\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\extract\mys
erver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF\lib\commons-lang30430.jar;C:\be
a\weblogic81\server\bin\.\myserver\.wlnotdelete\extract\myserver_voppocWebApp_vo
ppocWebApp\jarfiles\WEB-INF\lib\commons-logging30431.jar;C:\bea\weblogic81\serve
r\bin\.\myserver\.wlnotdelete\extract\myserver_voppocWebApp_voppocWebApp\jarfile
s\WEB-INF\lib\commons-validator30432.jar;C:\bea\weblogic81\server\bin\.\myserver
\.wlnotdelete\extract\myserver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF\lib\ja
karta-oro30433.jar;C:\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\extract\
myserver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF\lib\jdbc2_0-stdext30434.jar;
C:\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\extract\myserver_voppocWebA
pp_voppocWebApp\jarfiles\WEB-INF\lib\mailapi30435.jar;C:\bea\weblogic81\server\b
in\.\myserver\.wlnotdelete\extract\myserver_voppocWebApp_voppocWebApp\jarfiles\W
EB-INF\lib\struts30436.jar;C:\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\
extract\myserver_voppocWebApp_voppocWebApp\jarfiles\_wl_cls_gen.jar.
java.lang.NoClassDefFoundError: org/apache/commons/beanutils/Converter.
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubI
mpl.java:800)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppS
ervletContext.java:3236)
at weblogic.servlet.internal.WebAppServletContext.preloadServlets(WebApp
ServletContext.java:3181)Hello Mark,
Your suggested solution (putting an empty commons-logging.properties into
web-inf/classes or in a jar in web-inf/lib)
does not make any change at all. It still complains about not being able to
preload the servlet and still
gives exceptions upong calling upon LogFactory.
What I have been able to do is put the three classes from
com.bea.wlw.netui.util.logging into a separate jar
and add that to web-inf/lib.
However I am sometimes getting funny exceptions upon undeploy
(NoClassDefFoundError for org.apache.commons.collection.FastHashMap$KeySet).
Regards,
Robert Varga
"Mark Griffith" <[email protected]> wrote in message
news:[email protected]...
From a FAQ on netui:
1. Why do I get a ServletException while trying to deploy a struts web
application on a Workshop/Integration/Portal domain?
In the "<WL-HOME>/server/lib/knex.jar" file there is a properties file
called "commons-logging.properties" which configures the
com.bea.wlw.netui.util.logging.StrutsLogFactory class for Struts loggingas
below:
org.apache.commons.logging.LogFactory=com.bea.wlw.netui.util.logging.StrutsL
ogFactory
This class file is not available for a Struts web application that was not
built using Workshop, the reason being the containing NetUI jar files are
not present in the web application's WEB-INF/lib folder. This leads to a
ServletException while deploying the web application. The solution is toadd
a blank file (or a JAR containing the file) namedcommons-logging.properties
to the server CLASSPATH, or to the WEB-INF/lib folder of the concerned web
application. This issue will be fixed in Service Pack 2.
cheers
mbg
"Robert Varga" <[email protected]> wrote in message
news:[email protected]...
Hi Rob,
I also have a similar error with deploying a Struts web application into
a
8.1 Basic Workshop Domain created
by 8.1 Platform.
I get a ClassNotFoundException for 'com.wlw...StrutsLogFactory', whenStruts
tries to load any Jakarta class
from commons-beanutils or Struts which has logging.
This happens because commons-logging picks up some property whichinstructs
it to load that class, which is
naturally not included in most web applications, since it is
workshop-specific. This property definition, I think,
is in <bea>\weblogic81\server\knex.jar, called
commons-logging.properties,
containing the following line:
org.apache.commons.logging.LogFactory=com.bea.wlw.netui.util.logging.StrutsL
ogFactory
How can I override this in my webapp in a property file, so that when a
Struts or Beanutils class calls
LogFactory.getLog(org.apache.....<classname>.class), it would not try touse
the property file and the
class defined in knex.jar.
Thanks in advance,
Robert Varga
"Rob Woollen" <[email protected]> wrote in message
news:[email protected]...
Actually it complained about a NoClassDefFoundError. Generally this
is
caused by something in a parent classloader that is found but then
depends on something only loadable in a child classloader.
eg.
You have something in your $CLASSPATH that references something in the
WEB-INF/lib. This will NoClassDefFoundError.
So, as I recommended, remove everything you've added to the$CLASSPATH,
add the jars to WEB-INF/lib. If you're still having problems, show me
your $CLASSPATH, the contents of WEB-INF/lib, and the error message
/stack trace.
-- Rob
yuruo chen wrote:
Hello, Rob,
I did put the common-beanutils and other jar files in the
web-inf/lib
directory.
And from the weblogic console, I do see the jar file get included in
the
classpath.
(those generated file name have some number attached at the end.)
As
I
mentioned
before, I can use javap find the class using this weblogic generatedclasspath.
But weblogic complained that the class is not found.
Rob Woollen <[email protected]> wrote:
Remove anything you've added to the server's classpath.
Add the required jar files to WEB-INF/lib
-- Rob
yuruo chen wrote:
Hello,
I am tring to deploy my struts web application in weblogic 8.1. I
have
all the
library files in web-inf\lib directory. It gave me the error that
class
not found
for some class in struts library. The console also told me the
classpath.
But
I can use javap to find the class using the same classpath. Could
any
>>>>>
one point
me some direction what I am doing wrong here.
Thanks.
Here is the error message:
java.lang.NoClassDefFoundError:
org/apache/commons/beanutils/Converter.>
<Nov 13, 2003 11:05:29 AM EST> <Error> <HTTP> <BEA-101216>
<Servlet:
>>>>>
"action"
fa
iled to preload on startup in Web application: "voppocWebApp".
javax.servlet.ServletException:
[HTTP:101250][ServletContext(id=9921725,name=vop
pocWebApp,context-path=/voppocWebApp)]: Servlet classorg.apache.struts.action.A
ctionServlet for servlet action could not be loaded because a classon which it
depends was not found in the classpath
C:\bea\weblogic81\server\bin\myserver\upl
>
oad\voppocWebApp.war;C:\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\extrac
>
t\myserver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF\lib\activation30425.jar;C:
>
\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\extract\myserver_voppocWebApp
>
_voppocWebApp\jarfiles\WEB-INF\lib\commons-beanutils30426.jar;C:\bea\weblogic81\
>
server\bin\.\myserver\.wlnotdelete\extract\myserver_voppocWebApp_voppocWebApp\ja
>
rfiles\WEB-INF\lib\commons-collections30427.jar;C:\bea\weblogic81\server\bin\.\m
>
yserver\.wlnotdelete\extract\myserver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF
>
\lib\commons-digester30428.jar;C:\bea\weblogic81\server\bin\.\myserver\.wlnotdel
>
ete\extract\myserver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF\lib\commons-file
>
upload30429.jar;C:\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\extract\mys
>
erver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF\lib\commons-lang30430.jar;C:\be
>
a\weblogic81\server\bin\.\myserver\.wlnotdelete\extract\myserver_voppocWebApp_vo
>
ppocWebApp\jarfiles\WEB-INF\lib\commons-logging30431.jar;C:\bea\weblogic81\serve
>
r\bin\.\myserver\.wlnotdelete\extract\myserver_voppocWebApp_voppocWebApp\jarfile
>
s\WEB-INF\lib\commons-validator30432.jar;C:\bea\weblogic81\server\bin\.\myserver
>
\.wlnotdelete\extract\myserver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF\lib\ja
>
karta-oro30433.jar;C:\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\extract\
>
myserver_voppocWebApp_voppocWebApp\jarfiles\WEB-INF\lib\jdbc2_0-stdext30434.jar;
>
C:\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\extract\myserver_voppocWebA
>
pp_voppocWebApp\jarfiles\WEB-INF\lib\mailapi30435.jar;C:\bea\weblogic81\server\b
>
in\.\myserver\.wlnotdelete\extract\myserver_voppocWebApp_voppocWebApp\jarfiles\W
>
EB-INF\lib\struts30436.jar;C:\bea\weblogic81\server\bin\.\myserver\.wlnotdelete\
extract\myserver_voppocWebApp_voppocWebApp\jarfiles\_wl_cls_gen.jar.
java.lang.NoClassDefFoundError:
org/apache/commons/beanutils/Converter.
atweblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubI
mpl.java:800)
atweblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppS
ervletContext.java:3236)
atweblogic.servlet.internal.WebAppServletContext.preloadServlets(WebApp
ServletContext.java:3181) -
Lead import - Primary contact point not found for sales lead contact
Hi All, I am looking for a solutions, This is Leads import :
Concurrent program:
Import Sales Leads - Any clues ???
Starting child process# 1
Sales Lead Import Child #1 started at 26-Mar-2008 10:21:46
Getting the saleasforce_id for the user ...
Salesforce_id for the logged in user is : 100012066
Processing import_interface_id: 14002
budget: currency:USD
Value of currency :USD
Before calling custom hook for party match
Returned from custom hook with party_id:
Start DQM - TCA Processing
Starting DQM - TCA time: 20080326102146
#1 :: Calling FIND_PARTIES with OSR found = N
rule_id 33
After find_parties matches 0
No party match found !
Contact blind search begin: using FIND_PARTIES (Person)
No person match found !
DQM returned: YYYY-NNNN
Call user_hook is false
Creating location
Location created: 7322
Organization created: 173251
Creating party site for Organization
Creating PartySite for 173251:7322
ORGANIZATION Party Site created: 120133
Creating Party Site Use
PS Use created: 124173
Creating the Contact
Contact created: 173252
Creating Relationship
subject_id 173252
object_id 173251
Creating OrgContact
OrgContact created: 110104
Party Relationship created: 110153:173253
Creating party site for Relationship
Creating PartySite for 173253:7322
REL Party Site created: 120134
Creating Party Site Use
PS Use created: 124174
Creating contact point (1)
End DQM - TCA time: 20080326102147
Start Create - Process Lead time: 20080326102147
do_create_saleslead:Start
Total Lead Lines: 0
Primary contact point not found for sales lead contact
create_sales_lead:Start
The column(s), SOURCE NAME, must exist. The missing column is either required by the database or required based on the data that is being imported.
do_create_saleslead failed
Message Count:1
Batch Size:1
Number of Records Successfully Imported:0
Number of Records with Errors:1
Number of Records with unexpected Errors:0
End Child Import Process time: 26-Mar-2008 10:21:47
Message was edited by:
J.HarshaCan you please tell us your EBS version? - 11.5.10.2Thanks - Nagamohan
I had a SR: this is the solution
Can you please check the profile value 'OS: Source Code Mandatory for Leads' on all levels ( Site, application, responsibiloty and User). If the profile is set to Yes, please set it to N -
External Table error: KUP-04043: table column not found in external source
I am trying to get the syntaxc correct for an external table.
I keep getting this error:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04043: table column not found in external source: SITE
29913. 00000 - "error in executing %s callout"
*Cause: The execution of the specified callout caused an error.
*Action: Examine the error messages take appropriate action.
Data looks like: (some of one of many files, where the character field widths are variable)
ZZ,ANYOLDDATA,77777,25002000,201103,12,555.555,11.222
ZZ,ANYOLDDATA,77777,25002300,201103,34,602.162,8.777
ZZ,ANYOLDDATA,77777,25002400,201103,12,319.127,9.666
ZZ,OTHERDATA,77121,55069600,201103,34,25.544,1.332
ZZ,OTHERDATAS,77122,55069600,201103,22, 1.011,0.293
External table def I have:
CREATE TABLE MY_INPUT (
FIRST_CODE VARCHAR2(10),
SECOND_CODE VARCHAR2(20),
MY_NUMBER VARCHAR2(20),
THIRD_CODE VARCHAR2(20),
YEARMO VARCHAR2(6),
N NUMBER,
MEAN NUMBER,
SD NUMBER
ORGANIZATION EXTERNAL (
TYPE ORACLE_LOADER
DEFAULT DIRECTORY INPUT_DIR
ACCESS PARAMETERS (
RECORDS DELIMITED BY newline
BADFILE INPUT_LOGDIR:'bad.bad'
LOGFILE INPUT_LOGDIR:'log.log'
DISCARDFILE INPUT_LOGDIR:'discards.log'
fields terminated by ',' LRTRIM
MISSING FIELD VALUES ARE NULL
REJECT ROWS WITH ALL NULL FIELDS
( THIRD_CODE,N,MEAN,SD) )
LOCATION ( 'myfile.rpt')
NOPARALLEL
REJECT LIMIT UNLIMITED;
I have the directories INPUT_DIR and INPUT_LOGDIR defined, and read/write access granted to the user who creates the table and tried to query from it.
I have tried various combinations of VARCHAR2 lengths and NUMBER vs VARCHAR2 for some of the numeric fields.
I am not getting any Bad, Log or Discard files.
I can do a GET from the SQL prompt, and see the data:
SQL> GET 'C:\temp\input_dir'myfile.rpt'
and I see the data.
Windows 7
Oracle 11.2
I am not positive of the newline record delimiter - these files are generated by an automated system. Probably generated on a UNIX machine.
Any suggestions on what to try would be helpful.
KUP-04043 error message says to check the syntax .. .I am running out of thigns to check.
Thank you - KarenAnd the get ( I created the sanitized file, so we have a real working, failing, santiized example):
SQL> get c:\Inputfiles\myfile.rpt
1 ZZ,ANYOLDDATA,77777,25002000,201103,12,555.555,11.222
2 ZZ,ANYOLDDATA,77777,25002300,201103,34,602.162,8.777
3 ZZ,ANYOLDDATA,77777,25002400,201103,12,319.127,9.666
4 ZZ,OTHERDATA,77121,55069600,201103,34,25.544,1.332
5* ZZ,OTHERDATAS,77122,55069600,201103,22, 1.011,0.293
So the full series is:
CREATE DIRECTORY INPUT_DIR AS 'C:\InputFiles';
-- grant READ and WRITE
GRANT READ ON DIRECTORY INPUT_DIR TO ILQC;
GRANT WRITE ON DIRECTORY INPUT_DIR TO ILQC;
-- As SYS, create the bad/log/discard directory:
CREATE DIRECTORY LOGDIR AS 'C:\InputFiles\Logs';
-- grant READ and WRITE
GRANT READ ON DIRECTORY LOGDIR TO ILQC;
GRANT WRITE ON DIRECTORY LOGDIR TO ILQC;
CREATE TABLE MY_INPUT (
FIRST_CODE VARCHAR2(10),
SECOND_CODE VARCHAR2(20),
MY_NUMBER VARCHAR2(20),
THIRD_CODE VARCHAR2(20),
YEARMO VARCHAR2(6),
N NUMBER,
MEAN NUMBER,
SD NUMBER
ORGANIZATION EXTERNAL (
TYPE ORACLE_LOADER
DEFAULT DIRECTORY INPUT_DIR
ACCESS PARAMETERS (
RECORDS DELIMITED BY newline
BADFILE INPUT_LOGDIR:'bad.bad'
LOGFILE INPUT_LOGDIR:'log.log'
DISCARDFILE INPUT_LOGDIR:'discards.log'
fields terminated by ',' LRTRIM
MISSING FIELD VALUES ARE NULL
REJECT ROWS WITH ALL NULL FIELDS
( THIRD_CODE,N,MEAN,SD) )
LOCATION ( 'myfile.rpt')
NOPARALLEL
REJECT LIMIT UNLIMITED;
SELECT * FROM my_input;
and GET is as above. -
"Baud Rate" AttrId not found for CAN frame API's ncGetAttr and ncSetAttr
Hi,
Well, everything is in the Subject : "Baud Rate" AttrId not found for CAN frame API's ncGetAttr and ncSetAttr
Although it is listed in the LabVIEW Documentation, it is not in the enum's items gotten from `right click` -> `create` -> `contsant` on their `AttrId` connector.
My actuall need would be for checking a formerly opened CANNet handle compatibility against hardware requirement, so ... ncGetAttr.vi
Anyway, if somebody knows the actual u32 to hardwire instead of the enum constant, or did I get something wrong ?
ThanksHello,
You are quite right about the ncGetAttr.vi however the ncSetAttr does have a Baud Rate item if you scroll further down.
To get the Baud Rate wire a x80000007 to the AttrId pin. Or you can double click on the the ncSetAttr and then go into its block diagram, now
in the case structure select case 27 copy the numeric constant (which should be x80000007) and use it as the input to the ncGetAttr
Let us know if this helps.
Christian A
National Instruments
Applications Engineer -
Item Category: The specified category assignment is not found for this item
HI All,
I am loading Item category Assignment for Purchasing category Set, the standard prg fails and gives the error "The specified category assignment is not found for this item".
Where as for the inventory category set its working fine and the assignment is through.
Are there any changes required for this.
Thanks
BasawAs the error indicates, your servlet does not support GET method calls. Override doGet() method to do what you are doing in doPost to avoid this error. If you want your servlet to serve GET as well as POST methods, override service method instead.
-
Approval workflow for external requirement
Hi,
My company already implements Project System and Plant Maintenance, in which we generate PR from those modules, and the PR will be subject to release strategy.
At the moment we want to implement SRM 7.0 and we're planning to use Plan Driven Procurement scenario for the requirement generated automatically from PS or PM. As we can have a release strategy for PR generated from module PM and PS, can we have approval workflow for external requirement in SRM?
JoshYes you can but not by standard (Since itu2019s not out of box functionality), on the other hand itu2019s real simple to do an RFC call to your external system and get the agentu2019s information...
All SRM need is only agent ID (User ID) to which the work item need to be assigned...
We too have same scenario i.e. business want to use R/3 release group determination which they have already... we implemented it and working real good...
Let me know if you have any questions...
Thanks!!
Bharath -
Item cost not found for one or more items - Inventory Posting
Good Day Mentors,
My user has encountered an error during Inventory Posting and its "Item cost not found for one or more items".
The specific Message ID from SAP's System Message Log is 10001287.
I found a similar post which addresses this error here.
But unfortunately it did not help me solve my user's problem.
I already checked if the items had a defined "Item Cost" in the Item Master Data Inventory Tab, and they all have "Item Cost" defined.
I'm not sure if this will help, but below is the Inventory Audit Report of one of the items that is throwing the "Item cost not found" error.
I am not a business consultant neither am I literate in accounting, so thanks for the patience.
SAP Version: 9.0 PL5
Valuation Method: Moving Average
Thanks in advance!
SeanHi Augusto and Raviraj,
I've already verified in our production database the points you made:
- Is the "Manage Item cost per warehouse" selected in the Basic Initialization Screen?
YES
- Is the "Manage Inventory by Warehouse" ticked/checked in the "Inventory Data" tab of the "Item Master Data" screen?
YES
* I apologize for not have been able to give this information upfront.
Anyway, the database only has one warehouse at the moment.
I've checked the items, like the item in the screen shot above, and it does have an item cost.
Below is the screenshot of the sample item from my original post,
Thanks in advance!
Sean -
After upgrade to 11.1.1.2 Agreement not found for trading partners
We just upgraded from 11.1.1.1 to 11.1.1.2 and an existing composite that sends a file from Oracle EBS to an outside trading partner is not working.
We tried importing the Agreement from the 11.1.1.2 and when it did not work, we purged the repository and started from scratch.
The error we are getting is:
Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND
This is a file that we are sending from Oracle EBS to an outside trading partner via FTP.
One thing we are noticing is that when we create the agreement, it does not show up under our host TP, it only shows up under the target TP.
We have set up the TP, Channel, and agreements exactly like they are set in the 11.1.1.1 environment.
Here is the log file in debug mode.
[2010-06-17T07:40:10.471-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.engine.Engine:handleOutboundException notifying App
[2010-06-17T07:40:10.471-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: notifyApp: Enter
[2010-06-17T07:40:10.479-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: notifyApp: payload = <Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">[[
<correlationId>7F00000112945B5769F00000AEC3D2E0</correlationId>
<b2bMessageId>10011</b2bMessageId>
<errorCode>B2B-50547</errorCode>
<errorText>
<![CDATA[Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
]]>
</errorText>
<errorDescription>
<![CDATA[Machine Info: (afsmlnx04.rheem.com)
Description: Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
[2010-06-17T07:40:10.486-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: notifyApp: Enqueue the exception message:[[
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>7F00000112945B5769F00000AEC3D2E0</correlationId>
<b2bMessageId>10011</b2bMessageId>
<errorCode>B2B-50547</errorCode>
<errorText>
<![CDATA[Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
]]>
</errorText>
<errorDescription>
<![CDATA[Machine Info: (afsmlnx04.rheem.com)
Description: Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
[2010-06-17T07:40:10.492-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: deliverException: Send message to endpoint IP_IN_QUEUE
[2010-06-17T07:40:10.492-04:00] [soa_server1] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: log] URL ===== aq://IP_IN_QUEUE@jdbc/SOADataSource
[2010-06-17T07:40:10.514-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.transport.AppTransportInterface:send TO Endpoint: 509 aq://IP_IN_QUEUE@jdbc/SOADataSource
[2010-06-17T07:40:10.522-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] TransportProperties.TransportProperties():internal=true;aq.sender.queue_name=IP_IN_QUEUE;aq.sender.datasource=jdbc/SOADataSource;aq.sender.queue_payload_col=PAYLOAD;aq.sender.recipients=b2berroruser;
[2010-06-17T07:40:11.356-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.transport.AppTransportInterface:send Message Successfully Transmitted
[2010-06-17T07:40:11.377-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.msgproc.MessageHandler:findInvocationContext trying doc ref
[2010-06-17T07:40:11.396-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: notifyApp: Exit
[2010-06-17T07:40:11.396-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.engine.Engine:handleOutboundException Updated the Error Message Successfully: Error -: B2B-50547: Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
[2010-06-17T07:40:11.397-04:00] [soa_server1] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: log] class oracle.tip.b2b.metric.B2BMessageProperties[[
fromTP : Rheem
toTP : JPMorgan
DocumentProtocol : null
DocumentProtocolVersion : null
DocumentType : JPPositivePay
Agreement : null
MessageSize : 0.0
MessageState : ERROR
FromEndpoint : null
FromEndpointProtocol : null
FromEndpointStatus : null
ToEndpoint : null
ToEndpointProtocol : null
ToEndpointStatus : null
Application : null
Application : null
Composite : null
CompositeVersion : null
Service/Reference : null
]]In another thread Nitesh states:
b2b.documentProtocolVersion is missing in your properties and b2b.toTradingPartnerId is not set properly.
Below are the property, you should set in composite:
b2b.documentTypeName = <doctype>
b2b.documentProtocolVersion = <docRevision>
b2b.fromTradingPartnerId = <HostTPName>
b2b.toTradingPartnerId = <RemoteTPName>
b2b.messageType = <msgType>
If you want to identify TP based on Identifier then use below for TP:
b2b.toTradingPartnerId = <AS2 Identifier Value>
b2b.toTradingPartnerIdType = <AS2 Identifier>
We are setting the b2b.documentProtocolVersion variable in BPEL:
[2010-06-17T07:40:05.294-04:00] [soa_server1] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: orabpel.invoke.pool-3.thread-11] [userId: <anonymous>] [ecid: 0000I_5hM0hFw000jzwkno1C6FTd0000GQ,0:1:100000028] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [composite_name: RHMAPPositivePayService] [component_name: enquedat] [component_instance_id: 10011] [SRC_METHOD: log] [composite_instance_id: 10011] class oracle.integration.platform.blocks.b2b.B2BReference : oracle.integration.platform.blocks.b2b.B2BReference@8fdf1b3 : Key : b2b.documentProtocolVersion
[2010-06-17T07:40:05.294-04:00] [soa_server1] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: orabpel.invoke.pool-3.thread-11] [userId: <anonymous>] [ecid: 0000I_5hM0hFw000jzwkno1C6FTd0000GQ,0:1:100000028] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [composite_name: RHMAPPositivePayService] [component_name: enquedat] [component_instance_id: 10011] [SRC_METHOD: log] [composite_instance_id: 10011] class oracle.integration.platform.blocks.b2b.B2BReference : oracle.integration.platform.blocks.b2b.B2BReference@8fdf1b3 : Value : 1
Edited by: robn77 on Jun 17, 2010 5:27 AM -
UIXJSP App built off BC4J Project JBO Excep XML File not found for the Container
Running JDEV 9.0.3 build 960
Created a new project in folder "UIX JSP"
"UIX JSP" note the space!
Create a default UIX JSP Application based on existing BC4J Project
When running a JSP - Get a JBO Error complaining that the XML File not found for the Container
If I recreate the project with name UIX_JSP problem does not occur.I logged a bug on this.
Maybe you are looking for
-
How can i put pictures in a specific location inside a album on iPhoto?
I'm tryin' to complete my photoalbum in iPhoto ... so every picture i drag to the album is inserted at the end of th e row of pictures. is there a possibility to drag them directly in a specific place in between the existing pictures?
-
Multiple Apple IDs, Need Name of one, account of other
I have two apple ID's and would like to somehow merge them. Can this be done?
-
Can't create event from iPad mail
I Am using an iPad 2, with all updates. When I try to create an event from an email, the right screen pops up, but the right hand side is cut off, so I have no save button. Also can't change calendars, etc, because there is no save button on those
-
How to Set Prompt of a Field in OAF using lookup
Hi Gurus!! We have a requirement to change the Prompt of some fields and also have to give the flexibilty to the business user's so that in case if they wants to change the promt of a field in future then they should also be able to change it. Is it
-
Hello. I am new to the Forum, but turning to the masses out there for help with a weird one! I have used Adobe Audition for YEARS. I do a lot of converting of my finished WAV files to Mp3 files. The finished WAV's have always been in 48000Hz, 16 bit