Propose pernr from external range in PA40

Hi,
I need make new pernr in PA40 for new contract. This pernr is from external range. To get this range i need werks from pa40 but if i have pernr field empty sap validation say error, "complete pernr". The code for make pernr is in user-exit PADU02.
What can i do???
Thanks

Why you require werks to check the external number range you can directly check it in SPRO an provide accordingly.
Or use PA04
Regards,
Amit

Similar Messages

Transferred backed-up data from external hard disk to new hard drive on my MacBook Pro which seemed to be successful. I now find that some (or maybe all) old emails have been resent. Can anyone tell me what has happened?

Transferred backed-up data from external hard disk to new hard drive on my MacBook Pro which seemed to be successful. I now find that some (or maybe all) old emails have been resent. Can anyone tell me what has happened?

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

I want to exclude certain vendors up front of proposal creation from F110

Hi,
I want to exclude certain vendors up front of proposal creation from T.code F110.
Meaning - I would use the range 850000 - 999999, but I would also like to exclude for example vendor #'s 912271, 912771, 959281 from this proposal.
Currently the only way to exclude a vendor is to skip it from the proposal after it creates.
But is there anyother to overcome with this issue because it requires lot of time to find vendor and then delete it.

Hi,
Its possible to exclude with the help of field LFA1-NAME1 in the free selection screen. Select the field, give the names and mark exclude values indicator.
Hope this helps.
Thanks
Krishna.

Internal and external ranges...?

Hi All,
I have one question about internal and external ranges. When im sending some products data from source (200) Client to Target (202) Client. I have to find out its using internal or external updates.
Pls give me sample code how to check that.
Akshitha.

Hi,
I dont think a sample code can solve your problem. You can take help of your functional consultant while working with Number Ranges.
Internal Number Ranges and External Number Ranges are used to generate sequetial numbers, which we can create in the SNRO transaction.
Internal Number Ranges are Auto matically generates the numbers in the given ranges for the Object where as we can give certain number with the ranges given is the External Number Ranges. So External number Ranges are Obiviously useful for Data Transfer between two systems or Clients.
Because the Masterdata should reflect same in both the system, with that only integrity stands there .,
We can find this with debugging the corresponding program.
Thanks,
Naveen.I

Error while selecting date from external table

Hello all,
I am getting the follwing error while selecting data from external table. Any idea why?
SQL> CREATE TABLE SE2_EXT (SE_REF_NO VARCHAR2(255),
2        SE_CUST_ID NUMBER(38),
3        SE_TRAN_AMT_LCY FLOAT(126),
4        SE_REVERSAL_MARKER VARCHAR2(255))
5 ORGANIZATION EXTERNAL (
6    TYPE ORACLE_LOADER
7    DEFAULT DIRECTORY ext_tables
8    ACCESS PARAMETERS (
9      RECORDS DELIMITED BY NEWLINE
10      FIELDS TERMINATED BY ','
11      MISSING FIELD VALUES ARE NULL
12      (
13        country_code      CHAR(5),
14        country_name      CHAR(50),
15        country_language CHAR(50)
16      )
17    )
18    LOCATION ('SE2.csv')
19 )
20 PARALLEL 5
21 REJECT LIMIT UNLIMITED;
Table created.
SQL> select * from se2_ext;
SQL> select count(*) from se2_ext;
select count(*) from se2_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04043: table column not found in external source: SE_REF_NO
ORA-06512: at "SYS.ORACLE_LOADER", line 19

It would appear that you external table definition and the external data file data do not match up. Post a few input records so someone can duplicate the problem and determine the fix.
HTH -- Mark D Powell --

After a Lion clean install, how do I retrieve my data from external back-up? Following Apple advice for use of Migration Assistant did not work creating similar issues leading to clean install.

After a Lion clean install, how do I retrieve my data from external hard drive?
Following Apple advice I used Migration Assistant which crashed new system twice which is why I had to clean install Lion in the first place.
Is there a sure way of doing it?
I have only a few programs that I will have to install myself and that should not be a problem.
I just want my data, music and photos back where I can use them.

Time machine backups. I went to migration assistant a few hours ago and limited my selection to "users", no need for applications, settings and other files. Stuff started moving over at a fast pace but has now seemed to stall.
I will let it run overnight as there are lots of songs and photos as well as a few movies.
If that does not work, then I will go into TM and try restore. I have restored some things in the past such a mail files and it has worked well.
The Apple fellow at the store told me to go right into TM, he may have had a point. I'll get it eventually.

Need info on Standard Web services to pull Order data in CRM from external applications

Hi Gurus,
I have a requirement to pull Order data in CRM from external non-sap application using Web services. Are there any standard SAP provided web services to pull order data based on some input? If yes, can you provide me any kind of documentation related to this?
Appreciate your help on this.
Thanks
Lakshman

Hi Lakshman,
I have checked further.
Please review below link of the SAP Help documentation :
http://help.sap.com/saphelp_nw70/helpdata/en/47/3a989cbcef2f35e10000000a1553f6/content.htm?frameset=/en/46/97218e79f115eae10000000a114a6b/frameset.htm&current_toc=/en/d1/802cfc454211d189710000e8322d00/plain.htm&node_id=439&show_children=false
and also the link :
–http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DE0426DD9B0249F19515001A64D3F462&id=347DD31EB5AB4BC592BD8B29C0981A1B
Hoping that this will be helpful.
Best regards - Christophe

Airport Extreme is allowing access to screen sharing, file sharing from external IP addresses (some from China, Canada etc)

How to get control over the ports/port forwarding etc in Airport Extreme?
How to make AE drop packets to certain ports from external ports. Or create whitelist/blacklists?
I figured out where the MAC filtering is! (It is inside the Timed Access Control). I wish it had a list of connected device and allowed me to select, name and add them.
I am getting requests from Chinese IP to the screen sharing ports forwarded to my iMac. Had requests to other ports as well. There was one IP address from CANADA too.
I want to open file sharing for local use only.

Why is Airport Extreme forwarding requests for screen sharing from external ip addresses to my imac? I don't have a public address, nor use dynamic dns service, and I have removed the server app (at least I think I have, but Apple Store doesn't think so).

Broken in Logic 9?: Reindex loops from external drive

Adding loops from an external drive in Logic 9 does not seem to work any longer. It used to work great in L8. Anyone have similar experiences? Know any work arounds? Is it a bug? If it's a bug I'll file it with Apple.
Previously in Logic 8 it was easy to reindex loops on an external drive:
(1) Delete the loop indexes from root/Library/Audio/Apple Loops Index
(2) Use Finder to locate the loops on the external
(3) Drag the loop folders into the L8 media browser.
(4) L8 asks if you want to copy the loops or use them from their present location. Select present location intsead of copy locally.
(5) L8 takes 5-20 minutes to build index of loops from external drive
I have tried this procedure several times in L9 without success. Instead I get the following:
(1) Delete the loop indexes from root/Library/Audio/Apple Loops
(2) Use Finder to locate the loops on the external
(3) Drag the loop folders into the L8 media browser.
(4) L9 ask for my admin password.
(5) Enter my password
(6) I'm NOT asked if I want to copy loops locally or use them in their present location. Instead a reindex progress dialog comes up for 2 seconds then goes away.
(7) In the end nothing happened. No loops copied, indexed, or anything
There is only one way I managed to get loops into L9 but it is exactly what I'm NOT looking for:
(1) In the folder with all my loops spotlight search ".CAF" (In this case want to reindex Apple content which is all CAF)
(2) Make sure to click "show more" at the bottom of the search results.
(3) Drag the search results to the loop browser.
(4) L9 indexes them all right, AND also copies them to my user library! All 30 GBs worth. Definitely not what I want.
In the end, I had to reinstall the Loops from the DVDs and specify an external location for them. (This whole mess got started when I tried to move the GarageBand and iLife loops to an external drive. The installer does not let you specify a location for them.)
Just so you know I've done some homework:
I've scoured other Logic forums and found these relevant threads that in the end did not solve the issue. They mostly seem to refer to Logic 8 which does not have this issue.
@ LUG
Thread 1
@ Logic Pro Help
Thread 1
Thread 2
Thread 3 this fellow seems to have a similar problem as I. He drags folders into the loop browser but nothing happens.
@ Apple Discussions
Thread 1
Thread 2

I just installed LP9 and all my loops and samples are on external drives. The drag and drop onto the browser method worked fine and I WAS given the option to move the files or not. The only exception to the above is Ultrabeat samples. They seem to want to be on the System drive.
RW

Report from date range

I am creating a report from a series of inputs using a customizable date range. I need to select a start and end date (i was going to use two calendars for that) and place the data from the range into a pivot table. Any help on how to do this would be
great.

use the date picker control, see the thread:
http://superuser.com/questions/59939/date-selector-popup-in-excel
KR

Report query not returning the field value from external table

hi
I have an issue regarding reports. I have a query having 4 fields from external table and remaining from db tables. the report query returns all the fields from the db tables and only 2 fields from external table. but the same query if I tried in plsql developer it returns all the fields values.
Can anyone please help me in this issue.
Thanks and Regards
kk

Duplicate post?
value not displaying in report whereas it returns in plsql developer
value not displaying in report whereas it returns in plsql developer
Please log a SR if you do not get any reply to your thread instead of creating new one.
Thanks,
Hussein

To transfer time events from external time recording system to sap r/3

hi all,
I have a task to make an interface program between external time recording and sap r/3, and then to transfer the time events from that external system to sap system with the help of an rfc, i have got some information like the data first has to be transferred to the table CC1TEV and then from this table the data will be uploaded to 2011 infotype with the help of a standard program, but i am unable to find a solution for making the interface program and the RFC or BAPI which will transfer the records from external system.
if anybody has any information on this plz help me out to solve this problem.

Which recorgding terminals using to capture time events? They should have give some guidelines about this?
Regards
niranjan

How to merge key field from external source system with SAP R/3 master

Hi,
In SAP BW 7.0 system, our scenario is Master Data for 0GL_ACCOUNT is coming from SAP R/3 alongwith the Transactional data records for standard FI cubes. Then, one more set of transaction data is coming from external source system, a flat file, into another custom DSO(ZDSO_FI), which also has this GL Account field.
This flat file's GL account, GL_file, has to be basically mapped/merged with the standard 0GL_ACCOUNT field so that at the time of loading the transactional data for custom DSO, ZDSO_FI (with transformation mapping GL_file > 0GL_ACCOUNT), system automatically refers to the 0GL_ACCOUNT master data to load these incoming transactional values, from the external flat file system. How can this be done?
To illustrate the scenario, say I have 5 records in 0GL_ACCOUNT, loaded from SAP R/3 into SAP BW-
0GL_ACCOUNT      Short Description     Source System
100                                   D1                          R/3
200                                   D2                          R/3
300                                   D3                          R/3
400                                   D4                          R/3
500                                   D5                          R/3
Now suppose if my flat file has following sample transactional data, to be uploaded in SAP BW ZDSO_FI-
GL_file      Key Figure1
400          789
200          567
Then after uploading this transactional data in ZDSO_FI (with transformation mapping GL_file > 0GL_ACCOUNT), the 0GL_ACCOUNT data becomes as below-
0GL_ACCOUNT      Short Description     Source System
400
200
100                                   D1                          R/3
200                                   D2                          R/3
300                                   D3                          R/3
400                                   D4                          R/3
500                                   D5                          R/3
So note that the system did not refer the incoming GL's from flat file, although the field is mapped to 0GL_ACCOUNT in transformation, to the already available master data. Rather created 2 new data rows for the GL accounts coming from external system. Because of this I am not able to perform the calculations common from standard FI cube and ZDSO_FI, with GL account as key field. I need to synchronise these data values based on GL Account to proceed with further calculation and am badly stuck.
Request if anyone can please throw some light on how to achieve this seemingly simple requirement?
Thanks in advance.
Nirmit

Better post this thread is in the [Enterprise Data Warehousing|Data Warehousing; forum.

How can I move my project from external hard drive to my macbook pro?

How can I move my project from external hard drive to my macbook pro? every time I try to do some editing, the sequence is very slow, thanks in advance

Try here...
Setting-up a new Mac from an old one, its backups, or a PC

How can I copy cell formatting from one range to another?

How can I copy cell formatting from one range to another, including text fonts, colours, borders, etc., so that, for example, I can reuse a formatted reconciliation table again in different parts of a sheet?

Hi George,
Wayne found the Spinning Beachball of Death, and you will find it too.
Numbers is not good at handling large datasets. Might I suggest that you group your data into smaller sets (each month, perhaps?) and save each group in a separate Numbers document. Numbers will not link between documents, but you could have a summary Table within each document. Then comes the "clunky" bit of copying all those summary tables into a master document where you do the final processing of the data.
Regards,
Ian.

Propose pernr from external range in PA40

Similar Messages

Maybe you are looking for