Proposed new feature - dual level security

Given the increasing use of smartphones used both for business & personal messages (not that this wasn't always so) it would be useful to have different security options for different e-mail accounts. I always have to be careful about letting a family member use my BB because of sensitive business information - but it could be the other way around, someone not wanting their personal messages accessible to business colleagues (like their PA).
So this could involve different passwords to access different accounts (or one could have a "Master" password that opened both, and a secondary one that only allowed access to specific features).
While this feature could be completely customizable, that might be too cumbersome to be useful. It is probably enough to have the option of two levels of security.
It would also be important to be able to separately sync the different accounts - so all my personal stuff is not residing in my office computer, possibly accessible by IT or my PA.
I would like to be able to set different levels of "security timeout" for business vs personal accounts.
And the master email list (first icon) would need to be customizable so that messages from all email accounts do not necessarily appear that. Actually I would like to be able to deactivate the consolidated email list in favour of viewing each email account separately.
Security is already a major competitive advantage for BB, and this additional feature would reinforce that. And remind people how vulnerable they are with so much confidential personal and business information so easily accessible through their smartphone.

Hello,
Here is a review of the ram, DDR 222 one,
They use a DFI LanParty NFII Ultra B motherboard.
That features the nvidia nForce 2 chipset and soundstorm.
http://www.hi-techreviews.com/modules.php?name=News&file=article&sid=1256
You may find the link useful

Similar Messages

Proposed new feature: Generic HDMI and/or DLNA awareness

You can project the BB10 device screen via HDMI, but some applications are "HDMI aware".
I would like the OS itself to be, so that you could project the screen via HDMI or DLNA and make the mobile screen a second screen or input device to the projected screen. As TAT showed on the Playbook a few years ago.

Appearently new phones running MP Brew are in the works but I don't suspect they will be out until late this year. This question has been posted more than a few times and Verizon is unwilling to give an answer. The fact that no one is previewing a phone should also be telling as to when the new phones will ship.
Here is the link to the article: http://mobile.engadget.com/2011/06/03/qualcomm-ships-one-billion-brews-verizon-thirsty-for-more/

New Feature for proxy

Hi all!
I'm not found this feature in current Async OS documentation for web products.
So propose new feature - extended user logging mode.
In this mode all POST requests with posted data from some user group are grabbed and inserted into database for latest analysis by security operator.
Is it possible?

Hi,
Vontu will be the only qualified external DLP solution for now.
In addition to the external DLP functionality, Aurora (AsyncOS for Web 6.0) will also offer basic DLP functionality on-box in the IronPort Data Security Policies.
The corresponding idsdataloss logs would capture only the scanned outbound requests so I assume that this feature would be exactly what you are looking for...
Best Regards,
Jakob

What are the New features in OBPM in performance, integration & dev level

Hi,
Could someone help me
I would like to know what are the new features in Oracle BPM that will improve the performance of appln,
and new features in integration and development level.Thanks in advance.

Hi,
The information can be found in Release Content Documents (RCD) Published by Oracle.
Please refer metalink note 404152.1 ... download "Customer Relationship Management Family RCD (zip, 3.2 MB)"
You will find istore specific details in r12_mkt_sales_rcd.zip
Thanks,
Hrishi

Add "New Feature Request/Proposal"

Hello,
There seems no area for "New Feature Request/Proposal".
Someone may has good ideas of improving Cisco device/software 's function, or want to request for new features.
Could you take a consideration about adding an area/WebPage for it?
Thanks.

i like the idea and actually if you want to present us a PER you may reach your AM to do so since as someone mentions not all customers are allowed to do so.
the idea of having everyone asking for things they think would be useful would be somewhat troublesome because i know for a fact that many people come to us and ask things like "i have a XX system that can do this, how can i do the same with Cisco?"
in many cases we do not have something near the functionality they want but unfortunately that's the way the product was developed.
in many cases people would ask for something specific to their business and not for something in general. i've seen some questions on things that many people want like pushing a background image in a batch or how to select how to pick-up a specific call and not in FIFO (which will be in our next release) but i've also been asked questions only once and never heard anyone ask the same never again
i don't want anyone to take this the wrong way but you need to understand that this is a business, so we're most concerned on what customers want and some guys that can ask for features may not be customers. i could gather all my friends and ask them to post a request even if they were not going to buy anything and just by taking the amount of petitions it wouldn't work. that's why this kind of requests are done thru Account Managers.
don't get me wrong, i like the idea but making that work thru NetPro would involve as you mention resources to do so, to validate the idea, to count how many support them, see if they could be implemented, etc
javalenc

Block Breaker Lite - More levels, new features

Invasive Bamboo has just updated Block Breaker and Block Breaker Lite for the Pre and Pixi. Both versions have all new challenges and updated levels. The free version now includes ten levels to try!
New Features
Internationalized - The program now supports German, Spanish, and French translations.
Half-Size Bricks - Some levels now feature half-width bricks. This allowed us to make many of the levels more interesting and introduce some new challenges the previous version didn't allow us to have. [B]Moving Bricks[/B] - Animated bricks are now featured in many of the levels.
Micro/Mega Ball - This new power-up grows or shrinks the ball for extra challenges.
Death - A new rare instant death power-up has been introduced. You'll see it more when the bosses are introduced next update.
Star Field Background - The background screen now has a new animated star field scene.
Updated Levels - Every level was reviewed multiple times and many were replaced with new challenges.
Updated Collision - The code that handled the collision between the ball and bricks has been updated and fixes some of the problems of the previous version.
Updated Tilt Control - Tilt has been updated to give a cleaner and smoother experience when using tilt instead of a finger.
Lag - Now that version 1.4.1 of WebOS has been released, Palm has finally given us a way to remove the lag that was noticeable in some of the previous versions.
Block Breaker
Block Breaker Lite
As always, we're listening to you. If there is a feature that you want, please let us know. If you find a particular level too easy/too hard, let us know about that as well.
Thanks and Enjoy!
-- Phillip Davis
-- Invasive Bamboo

This is a poorly explained reason about why is so important having a loupe in Photoshop. I've not also, used the best example, but I will. This belongs to the ADDITIONAL FEATURES: Loupe/Magnificator View:. Also, I will try to make my english clrearer, but here it goes:

Can someone explain what the new feature "Webform Security" is for?

I notice there is a new field called "Webform Security" which inserts { module_ccsecurity ] into the form code but I have no idea what this is for and there is no reference to this module in the knowledgebase.
Can anyone offer some details?

Log into your bank, stay logged in and open a new tab. Then visit another site on the internet.
Now lets pretend that on this other site, someone (like the site administrator or a commentor) included a link that pointed to a url such as http://www.YourBank.com/TransferMoney?FromAccount=12345&ToAccount=54321&Amount=1000 and then you clicked the link, the bank would think you were making a legitimate transfer request becuase you were still logged in.
Fair enough, but you probably wouldn't click that link because you're smarter than that. Unfortunately your browser isn't so smart, and it doesn't have to be a link. They could have included an image tag, or css style sheet or javascript file that pointed to that url and your browser would have automatically "clicked" the link on your behalf when it tried to download the resource.
Thats CSRF in a nutshell.
There are ways to mitigate this danger, but its up to site owner (the bank in this example) to make sure this can't happen. As an end user it's mostly out of your hands. This tag appears to be BC's way to mitigate this, and it appears to be similar to other soultions to this problem.
I don't know if it works though, it's not docummented, so your guess is as good as mine. Either way its probably a good idea to include it on your forms.

New Features for OWB 9.2

Mark Van De Wiel mentioned yesterday in this forum that OWB 9.2 is now available at http://otn.oracle.com/software/products/warehouse/content.html . From the version number it would appear that this is a major new release, and it's a separate install rather than a patch on OWB9.0.4.
Would Mark, Igor or Shauna be able to give us some background on the new features in this new release? From quickly looking at the release notes they would appear to be;
- Correlated Commit (committing changes across all targets uniformly)
- Ability to create public database links
- Direct PEL (removes the need for temporary tables when exchanging partitions)
- Enhanced Flat File Support
- Mapping Debugger
- Incorporation of ETL functionality previously found in standalone Pure*Integrate
- Metadata change management using the OWB GUI rather than using OMB*Plus
- Multiple Name and Address Software Providers
- Name/Address Wizard
- New Public API for OWB
- Better support for Real Application Clusters
- Advanced Repository Security and Audit options
- Support for MITI metadata bridges to third-party products
It would be good to know the thinking behind these and what areas they think will be particularly of interest to us. Also, has anything been removed or changed that we've got used to using?
Also, any day now (fingers crossed) the patch to make the OLAP functionality in OWB9.0.4 work (the 9i 9.2.0.3.x patch?) should be out - will this work with OWB9.2 as well?
Many thanks
Mark Rittman
[email protected]

Hi Mark,
While I'm not in your list of people to respond I figure I give it a go anyways :-)
The list of features you mentioned is a nice summary. One of the main release themes is data quality as you noticed. Apart from changes to the name&address functionality we also added the advanced matching and merging into this release. So you can use custom rules to match and merge data. This also allows you to do things like householding for customer data records. In essence we have now completed the integration of Pure*Integrate into Warehouse Builder.
The mapping debugger is another big thing. This allow you to walk through your mappings and see in detail what happes to the data.
The metadata change management is now in the UI. THis means there is now object level version management in Warehouse Builder via the UI. You can also compare versions and get a difference report.
As you mentioned there are a number of smaller and bigger features next to this. The idea for this release is to make OWB a top Data Quality product and allow you to do your ETL and DQ in one tool. Apart from that we have added usability features (debugger, N&A wizard) and we have added some features to solve specific problems.
Especially the corelated commit is interesting in that respect. You can now, in a map with multiple targets control the commit, and choose to either commit all targets or none, or commit them individually (current behavior).
As usual there is a lot more, as this is indeed a major release. Keep an eye on OTN for more collateral regarding the new features. We are currently updating the site to reflect the new stuff.
On the OLAP patch, both 9.0.4 and 9.2 will work equally well with the OLAP patch (when it is available). In 9.2 we added some small thing around composites. More about that when there is an OLAP patch to test this one on in a customer site.
I hope this answered the question, if not let me know.
Jean-Pierre

Implement row-level security using Oracleu2019s Virtual Private Databases (VPD)

Environment: Business Objects XI R2; Oracle 10g
Functional Requirement:
Implement row-level security using Oracleu2019s Virtual Private Databases (VPD) technology. The restriction is that the Business Objects Universe connection should use a generic/u201Capplicationu201D database user account. This will allow the organization to avoid the situation where the Business Objects password and the Oracle password need to be kept in synch.
What do we need from the Business Objects support team?
1.     Review the 2 attempted solutions that we have tried to implement
2.     Propose solutions/answers to open questions for each of the attempted solutions
3.     Propose any alternate solution that will help us implement the Function Requirement stated above
Attempted Solution 1: Connection String uses Oracle Proxy User
The connection string that is specified in the Universe is the following:
app_user[end_user]/app_user_pwdarrobaDatabase.WORLD
app_user = generic application user
end_user = the oracle account of the end user which is set using arrobaVariable('BOUSER') app_user_pwd = password of the generic application user
We have tried and implemented this in our test environment. However, we have some questions and concerns around how the connections are reused in a connection pool environment.
Open Question for Solution 1:
i. What happens when multiple proxy users try to connect on at the same time? Business Objects shares the generic app_user connect string. However, every user that logs on will have their own unique proxy user credentials. Will there be any contention involved? If so, what kind of errors can we expect?
ii. If a user logs on using his credentials (proxy user), and business objects opens up a connection to the database using that user's credentials (as the proxy user but logging in through the generic app user). Then the user exits out --> based on our test today, it seems like the database connection remains open. In that case, if another user logs on similarly with their credentials, will business objects simply assign the first users connection to that second user? If so, then our security will not work. Is there a way that Business Objects can somehow ensure that everytime we close a report, the connection is also terminated both at the BO and DB levels?
iii. Our 3rd question is general high level -> How connection pooling works in general and how it is implemented in BO, i.e. how are new connections assigned, how are they recycled, how are they closed, etc.
Attempted Solution 2: Using the ConnectInit parameter
Reading through a couple of the Business Objects documents, it states that u201CUsing the ConnectInit parameter it is possible to send commands to the database when opening the session which can be used to set database specific parameters used for optimization.u201D
Therefore, we tried to set the parameter in the Universe using several different options:
ConnectInit = BEGIN SYSTEM.prc_logon('arrobaVARIABLE('BOUSER')'); COMMIT; END; ConnectInit = BEGIN DBMS_SESSION.SET_IDENTIFIER('arrobaVariable('BOUSER')'); COMMIT; END;
Neither of the above iterations or any variation of that seemed to work. It seems that the variable is not being set or being u201Cexecutedu201D on the database.
One of the Business Objects documents had stated that Patch ID 38, 977, 350 must be installed in our BO environments. We have verified that this patch has been applied on our system.
Open Questions for Solution 2:
How do we get the parameter ConnectInit to work? i.e. what is the proper syntax to enter and what other things do we need to check to get this to work.
Note: Arroba word is being used instead of the symbol in order to avoid following error message:
We are sorry but your message can not be posted since you have included an email address. Please remove the email address and re-post.

the connectinit setting should look something like this:
declare a date; begin vpd_setup('@VARIABLE('BOUSER')'); Commit; end;
The vpd_setup procedure (in Oracle) should look like this:
CREATE OR REPLACE procedure vpd_setup (p_user varchar)IS
BEGIN
DBMS_SESSION.set_vpd( 'SESSION_VALUES', 'USERID', p_user );
END vpd_setup;
Then you can retrieve the value of the context variable in your vpd functions
and set the vpd.

[Security]   Row-level security in ADF

Hi all,
I want to implement row-level security in my application, the scenario is like this:
There are several users that connect to the application
These users are authenticated in some way (XML file, OID, DB)
When each user wants to access (Select, Update, Delete) an ADF Table, either updatable or read-only, a predefined 'where condition' based on that table and the operation the user wants to do, must be concatenated to his DML, transparent from the user.
So if for example a user queries the Emp Salary table only records with salary < 10K/Month will be fetched from the underlying table. This should be done automatically and not hard-coded in the application.
I have tried VPD and it has some useful features but my problems are:
1) Where and how to define the 'where conditions'?
2) How to attach the 'where conditions' to the executing DML?
3) What is the best way to make DB know which user is really executing DMLs? (Not a single Application Server admin user)
4) What is the best authentication approach?
Any helps will be really appreciated.
S/\EE|)

Hi,
yes you can. Database proxy user is setup in the prepare session method as well and EUS can be configured to take the J2EE username to then re-connect the app to teh database schema
    public void prepareSession(SessionData SessionData)
       super.prepareSession(SessionData);
       oconn = ((PrxyTransactionImpl)this.getDBTransaction()).getPrxyConnection();
       // Specify the user that connects through the proxy user and its roles
       Properties prop = new Properties();
       prop.put(OracleConnection.PROXY_USER_NAME,"hr");
       //prop.put(OracleConnection.PROXY_ROLES, roles);
       String appContext = "Begin ctxhrpckg.set_userinfo('"+getApplicationUserName()+"'); END;";
       java.sql.CallableStatement st= null;
      // Open the proxy session (DB-authenticated users)
      try
        oconn.openProxySession(OracleConnection.PROXYTYPE_USER_NAME, prop);
        st = getDBTransaction().createCallableStatement(appContext,0);
        st.execute();
      catch (SQLException e)
        e.printStackTrace();
package oracle.sample.dbprxy.adfbc;
import oracle.jbo.server.DBTransactionImpl2;
import oracle.jbo.server.DatabaseTransactionFactory;
* TransactionFactory that returns PrxTransactionImpl, which is a subclass of
* DBTransactionImpl2
* @author Frank Nimphius
public class PrxyDatabaseTransactionFactory extends DatabaseTransactionFactory
public PrxyDatabaseTransactionFactory()
    super();
   * Override the create method to return an instance of PrxyTransactionImpl instead
   * of DBTransactionImpl2
   * @return PrxyTransactionImpl
public DBTransactionImpl2 create()
    return new PrxyTransactionImpl();
package oracle.sample.dbprxy.adfbc;
import oracle.jbo.server.DBTransactionImpl2;
import oracle.jdbc.OracleConnection;
public class PrxyTransactionImpl
extends DBTransactionImpl2
public PrxyTransactionImpl()
    super();
   * The DBTransactionImpl2 does not expose the connection in a public
   * method. This class is a wrapper to expose the connection to the
   * BC app, so it can be accessed in the ApplicationModuleImpl class
   * @return OracleConnection - SQL Connection
public OracleConnection getPrxyConnection()
    return (OracleConnection) this.getJdbcConnection();
}Note that for EUS ApplicationModule pooling should be disabled
Frank

Domain level security issue with InfoPath Form

I have followed the article “Submitting Data from InfoPath 2007 to a SharePoint List” which can be found at
http://msdn.microsoft.com/en-us/library/cc162745.aspx.
But instead I am using SharePoint and InfoPath 2010.
I get the following error after deploying and running the form with its security level set to domain.
“A query to retrieve form data cannot be completed because this action would violate cross-domain restrictions. If this form template is published to a SharePoint
document library, cross-domain access for user form templates must be enabled under InfoPath Forms Services in SharePoint Central Administration, and the data connection settings must be stored in a UDC file in a data connection library in the same site collection.
If this is an administrator-approved form template, the security level of the form must be set to full trust, or the data connection settings must be stored in a UDC file by using the Manage data connection files option under InfoPath Forms Services in SharePoint
Central Administration.”
How do I get this form working on the server and client using domain level security?
Extra Note: On an additional not the form works fine in SharePoint and InfoPath designer when the security level is set to Full Trust.

Hi, Is this possible over a SharePoint "LIST"? I'm hitting brick walls and can't set the Security level on my form at all. Everything that I'm reading refers to Document Libraries but nothing about SharePoint List. It seems that this should work over a list,
but I'm hitting brick walls all the way around. Here is a copy of the question that I posed below under Todd.Wilder's post:
Hi,
Following this forum question/comment I am attempting to set the security on my Infopath form to Full Trust. But, I don't have the Security and Trust option. I can set the Trusted Location through the Trust Center but I can't find anywhere to set security.
I am using InfoPath 2010. What am I missing? Everything that I'm reading says that this is the problem and my error message is exactly like SomeGuy's message. One more piece to this is...this is a form over an Existing SharePoint List. I've found that I can
see the Security if I start InfoPath and start a New Blank Form, but by editing the form from a SharePont list, the option to edit Security is not there. HELP!!
I am following the instructions below that come from:
http://msdn.microsoft.com/en-us/library/ee526352.aspx
The InfoPath form designer automatically selects the appropriate security level (either Restricted or Domain) based on the features that you are using in the form. The security setting is always as restrictive as possible, starting at Restricted, to help
ensure a greater level of protection for you and your data. Users can manually override this automated setting to select a level of security that is more appropriate for the form by following these steps:
Click the File tab, and then click Form Options on theInfo tab.
In the Categories list, click Security and Trust.
Uncheck the Automatically determine security level (recommended) check box.
Select the desired security level.
Thank you,
~Tina~
~Tina~

1Z0-140 Oracle Forms Developer: New Features

Can any one help me with study material to pass 1Z0-140 Oracle Forms Developer: New Features tests? Please email me @ (email address removed by moderator for security purposes). I could not find any specific book for prepration for Z0-140.
Edited by: user4202610 on Aug 23, 2009 4:40 PM
Edited by: Certification Forum Moderator on Aug 24, 2009 8:13 AM

user4202610 wrote:
Can any one help me with study material to pass 1Z0-140 Oracle Forms Developer: New Features tests? Please email me @ [email protected]
A request for emailed information outside of forum is likely to result in reciept of material that is unauthorised training material or material in breach of copyright. Please read and drill down from forum post [The route you choose|http://forums.oracle.com/forums/ann.jspa?annID=1122] which provides some information on this.
I could not find any specific book for prepration for Z0-140.There is no specific book relating to this exam. As OCP level and especially as already an OCP I would anticapte candidates should have th capacity to review exams topics [http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_org_id=28&lang=US&p_exam_id=1Z0_140] and look up related documentation. If not they should probably seek out and attend oracle training.
>
Edited by: user4202610 on Aug 23, 2009 4:40 PM

Override email a link or create a new feature ???

Hi all,
I just want to ask if i want to email a document link from send to, but i want to grant read permission automatically after select the persons who i want to send the email to, should i override the send to or create new feature or is there any way to do
that using share Point designer ???
thanks in advice.
Jina

Hi Jina,
The goal cannot be achieved with SharePoint Designer.
To achieve this goal, it is better to create a custom solution with some code which will send an email with the link of the file and grant read permission on the file to the corresponding users.
About how to send an email programmatically:
http://www.c-sharpcorner.com/Blogs/10087/send-email-in-sharepoint-2010.aspx
https://www.collaboris.com/blogs/collaboris-blog/mark-jones/2012/11/06/code-sample-how-to-programmatically-send-an-email-in-sharepoint#.VS4HfWAfodk
About how to grant permission to users in SharePoint:
http://mohamedakb.blogspot.com/2012/06/set-item-level-permission.html
http://www.thespgeek.com/2011/08/assigning-sharepoint-list-item-level.html
http://www.chaholl.com/archive/2009/12/12/programmatically-set-item-level-security-in-a-document-library.aspx
Best regards,
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Oracle 10G New Feature........Part 1

Dear all,
from last couple of days i was very busy with my oracle 10g box,so i think this is right time to
share some intresting feature on 10g and some internal stuff with all of you.
Have a look :-
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Oracle 10g Memory and Storage Feature.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1.Automatic Memory Management.
2.Online Segment Shrink
3.Redolog Advisor, checkpointing
4.Multiple Temporary tablespace.
5.Automatic Workload Repository
6.Active Session History
7.Misc
a)Rename Tablespace
b)Bigfile tablespace
c)flushing buffer cache
8.ORACLE INTERNAL
a)undocumented parameter (_log_blocks_during_backup)
b)X$ view (x$messages view)
c)Internal Structure of Controlfile
1.Automatic memory management
================================
This feature reduce the overhead of oracle DBA.previously mostly time we need to set diff oracle SGA parameter for
better performance with the help of own experience,advice views and by monitoring the behaviour
of oracle database.
this was just time consuming activity.........
Now this feature makes easy life for oracle DBA.
Just set SGA_TARGET parameter and it automatically allocate memory to different SGA parameter.
it focus on DB_CACHE_SIZE
SHARED_POOL_SIZE
LARGE_POOL
JAVA_POOL
and automatically set it as
__db_cache_size
__shared_pool_size
__large_pool_size
__java_pool_size
check it in alert_log
MMAN(memory manager) process is new in 10g and this is responsible for sga tuning task.
it automatically increase and decrease the SGA parameters value as per the requirement.
Benefit:- Maximum utlization of available SGA memory.
2.Online Segment Shrink.
==========================
hmmmmm again a new feature by oracle to reduce the downtime.Now oracle mainly focus on availablity
thats why its always try to reduce the downtime by intrducing new feature.
in previous version ,reducing High water mark of table was possible by
Exp/imp
or
alter table move....cmd. but on these method tables was not available for normal use for long hrs if it has more data.
but in 10g with just few command we can reduce the HWmark of table.
this feature is available for ASSM tablespaces.
1.alter table emp enable row movement.
2.alter table emp shrink space.
the second cmd have two phases
first phase is to compact the segment and in this phase DML operations are allowed.
second phase(shrink phase)oracle shrink the HWM of table, DML operation will be blocked at that time for short duration.
So if want to shrink the HWM of table then we should use it with two diff command
first compact the segment and then shrink it on non-peak hrs.
alter table emp shrink space compact. (This cmd doesn't block the DML operation.)
and alter table emp shrink space. (This cmd should be on non-peak hrs.)
Benefit:- better full table scan.
3.Redolog Advisor and checkpointing
================================================================
now oracle will suggest the size of redo log file by V$INSTANCE_RECOVERY
SELECT OPTIMAL_LOGFILE_SIZE
FROM V$INSTANCE_RECOVERY
this value is influence with the value of FAST_START_MTTR_TARGET .
Checkpointing
Automatic checkpointing will be enable after setting FAST_START_MTTR_TARGET to non-zero value.
4.Multiple Temporary tablespace.
==================================
Now we can manage multiple temp tablespace under one group.
we can create a tablespace group implicitly when we include the TABLESPACE GROUP clause in the CREATE TEMPORARY TABLESPACE or ALTER TABLESPACE statement and the specified tablespace group does not currently exist.
For example, if group1 is not exists,then the following statements create this groups with new tablespace
CREATE TEMPORARY TABLESPACE temp1 TEMPFILE '/u02/oracle/data/temp01.dbf'
SIZE 50M
TABLESPACE GROUP group1;
--Add Existing temp tablespace into group by
alter tablespace temp2 tablespace group group1.
--we can also assign the temp tablespace group on database level as default temp tablespace.
ALTER DATABASE <db name> DEFAULT TEMPORARY TABLESPACE group1;
benefit:- Better I/O
One sql can use more then one temp tablespace
5.AWR(Automatic Workload Repository):-
================================== AWR is built in Repository and Central point of Oracle 10g.Oracle self managing activities
is fully dependent on AWR.by default after 1 hr, oracle capure all database uses information and store in AWR with the help of
MMON process.we called it Memory monitor process.and all these information are kept upto 7 days(default) and after that it automatically purge.
we can generate a AWR report by
SQL> @?/rdbms/admin/awrrpt
Just like statspack report but its a advance and diff version of statspack,it provide more information of Database as well as OS.
it show report in Html and Text format.
we can also take manually snapshot for AWR by
BEGIN
DBMS_WORKLOAD_REPOSITORY.CREATE_SNAPSHOT ();
END;
**The STATISTICS_LEVEL initialization parameter must be set to the TYPICAL or ALL to enable the Automatic Workload Repository.
[oracle@RMSORA1 oracle]$ sqlplus / as sysdba
SQL*Plus: Release 10.1.0.2.0 - Production on Fri Mar 17 10:37:22 2006
Copyright (c) 1982, 2004, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> @?/rdbms/admin/awrrpt
Current Instance
~~~~~~~~~~~~~~~~
DB Id DB Name Inst Num Instance
4174002554 RMSORA 1 rmsora
Specify the Report Type
~~~~~~~~~~~~~~~~~~~~~~~
Would you like an HTML report, or a plain text report?
Enter 'html' for an HTML report, or 'text' for plain text
Defaults to 'html'
Enter value for report_type: text
Type Specified: text
Instances in this Workload Repository schema
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DB Id Inst Num DB Name Instance Host
* 4174002554 1 RMSORA rmsora RMSORA1
Using 4174002554 for database Id
Using 1 for instance number
Specify the number of days of snapshots to choose from
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Entering the number of days (n) will result in the most recent
(n) days of snapshots being listed. Pressing <return> without
specifying a number lists all completed snapshots.
Listing the last 3 days of Completed Snapshots
Snap
Instance DB Name Snap Id Snap Started Level
rmsora RMSORA 16186 16 Mar 2006 17:33 1
16187 16 Mar 2006 18:00 1
16206 17 Mar 2006 03:30 1
16207 17 Mar 2006 04:00 1
16208 17 Mar 2006 04:30 1
16209 17 Mar 2006 05:00 1
16210 17 Mar 2006 05:31 1
16211 17 Mar 2006 06:00 1
16212 17 Mar 2006 06:30 1
16213 17 Mar 2006 07:00 1
16214 17 Mar 2006 07:30 1
16215 17 Mar 2006 08:01 1
16216 17 Mar 2006 08:30 1
16217 17 Mar 2006 09:00 1
Specify the Begin and End Snapshot Ids
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Enter value for begin_snap: 16216
Begin Snapshot Id specified: 16216
Enter value for end_snap: 16217
End Snapshot Id specified: 16217
Specify the Report Name
~~~~~~~~~~~~~~~~~~~~~~~
The default report file name is awrrpt_1_16216_16217.txt. To use this name,
press <return> to continue, otherwise enter an alternative.
Benefit:- Now DBA have more free time to play games.....................:-)
Advance version of statspack
more DB and OS information with self managing capabilty
New Automatic alert and database advisor with the help of AWR.
6.Active Session History:-
==========================
V$active_session_history is view that contain the recent session history.
the memory for ASH is comes from SGA and it can't more then 5% of Shared pool.
So we can get latest and active session report from v$active_session_history view and also get histortical data of
of session from DBA_HIST_ACTIVE_SESS_HISTORY.
v$active_session_history include some imp column like:-
~SQL identifier of SQL statement
~Object number, file number, and block number
~Wait event identifier and parameters
~Session identifier and session serial number
~Module and action name
~Client identifier of the session
7.Misc:-
========
Rename Tablespace:-
=================
in 10g,we can even rename a tablespace by
alter tablespace <tb_name> rename to <tb_name_new>;
This command will update the controlfile,data dictionary and datafile header,but dbf filename will be same.
**we can't rename system and sysaux tablespace.
Bigfile tablespace:-
====================
Bigfile tablespace contain only one datafile.
A bigfile tablespace with 8K blocks can contain a 32 terabyte datafile.
Bigfile tablespaces are supported only for locally managed tablespaces with automatic segment-space management.
we can take the advantage of bigfile tablespace when we are using ASM or other logical volume with RAID.
without ASM or RAID ,it gives poor response.
syntax:-
CREATE BIGFILE TABLESPACE bigtbs
Flushing Buffer Cache:-
======================
This option is same as flushing the shared pool,but only available with 10g.
but i don't know, whats the use of this command in prod database......
anyway we can check and try it on test server for tuning n testing some query etc....
SQL> alter system flush buffer_cache;
System altered.
++++++++++++++++++
8.Oracle Internal
++++++++++++++++++
Here is some stuff that is not related with 10g but have some intresting things.
a)undocumented parameter "_log_blocks_during_backup"
++++++++++++++++++++++++
as we know that oracle has generate more redo logs during hotbackup mode because
oracle has to maintain the a complete copy of block into redolog due to split block.
we can also change this behaviour by setting this parameter to False.
If Oracle block size equals the operating system block size.thus reducing the amount of redo generated
during a hot backup.
WITHOUT ORACLE SUPPORT DON'T SET IT ON PROD DATABASE.THIS DOCUMENT IS JUST FOR INFORMATIONAL PURPOSE.
b)some X$ views (X$messages)
++++++++++++++++
if you are intresting in oracle internal architecture then x$ view is right place for getting some intresting things.
X$messages :-it show all the actions that a background process do.
select * from x$messages;
like:-
lock memory at startup MMAN
Memory Management MMAN
Handle sga_target resize MMAN
Reset advisory pool when advisory turned ON MMAN
Complete deferred initialization of components MMAN
lock memory timeout action MMAN
tune undo retention MMNL
MMNL Periodic MQL Selector MMNL
ASH Sampler (KEWA) MMNL
MMON SWRF Raw Metrics Capture MMNL
reload failed KSPD callbacks MMON
SGA memory tuning MMON
background recovery area alert action MMON
Flashback Marker MMON
tablespace alert monitor MMON
Open/close flashback thread RVWR
RVWR IO's RVWR
kfcl instance recovery SMON
c)Internal Structure of Controlfile
++++++++++++++++++++++++++++++++++++
The contents of the current controlfile can be dumped in text form.
Dump Level Dump Contains
1 only the file header
2 just the file header, the database info record, and checkpoint progress records
3 all record types, but just the earliest and latest records for circular reuse record types
4 as above, but includes the 4 most recent records for circular reuse record types
5+ as above, but the number of circular reuse records included doubles with each level
the session must be connected AS SYSDBA
alter session set events 'immediate trace name controlf level 5';
This dump show lots of intresting information.
it also show rman recordes if we used this controlfile in rman backup.
Thanks
Kuljeet Pal Singh

You can find each doc in html and pdf format on the Documentation Library<br>
You can too download all the documentation in html format to have all on your own computer here (445.8MB)<br>
<br>
Nicolas.

New Features and Improvements for CS6

IMPORTANT:
By default, Photoshop comes with the Proofing Colors (Cmd/Ctrl+Y) activated and set to CMYK. Adobe must warn about that, because I was editing a large amount of pictures for work and I was doing it under that color profile/work space.
LAYERS PANEL:
Layer Adjustments:
Solid Color: visual feedback in real time.
Gradient: IDEM as above.
Pattern: IDEM as above.
Gradient Map: IDEM as above.
Gradient Editor: IDEM as above.
Opacity and Fill: IDEM as above.
Curves and Levels: Ability to load alfa channels. This way, the adjustments made on the alfa channel won't be destructive.
CHANNELS PANEL:
Channel Luminosity Selection:
Ability to add and subtract from the selection.
Ability to designate an area to be selected.
For point 1, by using the shortcut Cmd+Alt+[number] the luminosity of a channel is loaded as selection. With Cmd+Alt+Shift+[number], the selection grows. But there is no way to subtract from selection (unless by clicking with the mouse on the channel's thumbnail). I think that can be solved by using Cmd+Alt+Shift+[- or +] in order to subtract or add from selection.
Point 2 maybe even more important than point 1, because it allows selecting a designated area by the user, instead of the default luminosity selection, which ranges from 50% of the mid tones to the highlights (or shadows, if the selection is inverted). The user should be allowed to select the starting and finishing points of the luminosity selection.
I thought 2 ways for solving these issues (and making it more intuitive and faster):
A) By using the Histogram Panel, by dragging and highlighting an area on it, that it should load the selected luminosity pixels as a selection, as shown in figure 1:
figure 1
So the result of doing that will be a selection based on the area of the histogram that have been highlighted.
B) By creating a new Adjustment Layer:
It can be based in the same structure of the HUE Adjustment Layer, like figure 2 shows:
Figure 2
Or it can be this way (much better). Figure 3:
Figure 3
The selection can also be controlled by using the Click and Drag as suggested in the figure 1, as shown in the figure 4:
Figure 4
The overlaid highlighting over the histogram can be functional or just a mere graphic representation of the Range and Fade Selector. The "Fading" areas should be also be draggable in order to increase smooth the selection. However, the smoothing can be much better done with the Refining Selection tool and it can be ignored from this new tool.
In any of these cases, the adjustments should give real time feedback when growing or shrinking selection; we must see the selection going bigger or smaller and also, the highlighted area should be draggable as well.
TOOLS PANEL:
Brush: detect edges while painting on masks (for manual mask refining. It would work similar to the Replace Color Brush, but only for masks and alfa channels). It also needs a shortcut to set the opacity.
Dodge & Burn: Protect Tones should be allowed when painting on masks or alfa channels (for manual mask refining). D&B can also use edge detection as well.
FILTERS:
Some of them, like the ones involving Blur or the High-Pass and the Unsharp Mask filter, should work in real time (these ones, at the least).
It can also added a Particle Generator Filter.
It would be really nice having the ability to create particles such as dust, fog, rain, snow, etc in a more realistic manner than just the scattering function from the Brush Palette, or by mixing different filters with different blends. The Particle Generator should have an slider to control the depth of field, so it will give a feeling of depth and also, a way to load masks, so that way, the particles can exists before the image and also, behind. It would be great for creating a nice feeling of depth (kind of a bokeh effect).
I've been playing with After Effect few times, and the way to create shapes and forms from nothing is the way of easier than in Photoshop.
TIME LINE:
I think it's time give dynamism the filters applied to a movie clip, and also, dynamics to the fade effects, like it happens in After Effects by adding Bezier Curves.
HISTOGRAM:
It should be possible to zoom in into the histogram, for a more precise feedback and analysis of the image tonal values.
ADDITIONAL FEATURES:
The fade tool should work in real time.
Loupe/Magnificator View:
This is very useful when it comes to edit and image in detail, with a lot of zoom, like 3200%. Unfortunately, Photoshop doesn't provide a real time feedback in an additional window, such as the Window/Arrange/New Window For […].
It would be really useful having a window showing the image at fit on the screen while working on the other window at 100% or 3200% of zoom, but in real time. This way, you can see if you're doing a good job on the pixels or, if you're overdoing it.
It happens that, when working with big images at 100% of the image size (or more), the brain cannot figure out how is looking the whole image, so having a realtime feedback in the other window would help a lot for detailled work.
And why not, ading the same real time structure descrived above but to the Navigator, for faster and lighter use of the hardware capabilities. Probably, adding a check box to the navigator that blocks it to a given zoom, so when zooming into the image in the navigator, the image shown in the window isn't magnified too.
Give me a chance to show you some examples of what I have done by improvising particles and fog about 5 years ago:
http://mart1980.deviantart.com/gallery/5027033#/d1m119x
And what I did 7 years ago by manually, selecting different shades of gray and using just Levels for 8 hours (which coule be done faster and easier with another tool I thought, which I will post later):
I cannot post examples of the other features I'm suggesting because there are not such new features yet (I would have to create an hipothetical enviroment, but I think, you can fiure it out in your mind).
Unfortunately, I don't know programing, even though, I tried something with Filter Factory, achieving good results, but that pluging consumes too much resources and/or is bad designed/have not the right tools for certain things.
Hope this post is enough worthy of the Adobe's attention.
Thanks,
Ø³

This is a poorly explained reason about why is so important having a loupe in Photoshop. I've not also, used the best example, but I will. This belongs to the ADDITIONAL FEATURES: Loupe/Magnificator View:. Also, I will try to make my english clrearer, but here it goes:

Proposed new feature - dual level security

Similar Messages

Maybe you are looking for