Propper Compressions: from Final Cut Pro to DVD Studio Pro?

Ok, so i have a project on Final Cut Pro, what are the right compressions that i would need to do to get my project to DVD Studio Pro?

First take a long look at the manual and the tutorial.
Then elect the preset in Compressor that fit to the total length of your movie. Less than 90 minutes = 90 minute preset for video. Whatever yours is.
Then encode audio in compressor to Dolby 2.
Best to do the DVD SP tutorial. Your question is basic.
good luck

Similar Messages

Best quicktime export settings - compression - from final cut pro

i have done this for a while. still don't know.
to translate an ntsc 24p project onto a dvd, which export settings (compressor)do you use in final cut pro? i use current settings, and once i am done with idvd ("best quality") it just doesn't look high quality. is this an idvd question?
powermac g5 2.7 ghz dual Mac OS X (10.4) 2.5 gb ram

I didn't know iDVD could handle 24fps project. Or is it a 29.97 (23.98 with a pulldown).
Best quality in iDVD just means that it works on it longer to compress it more to fit more on disk. Have you tried Best Speed version?
Patrick

Still Frames Exported from Final Cut Jitter in DVD Studio Pro

I'm on a Titanium Powerbook G4. I use Final Cut 3.0 and DVD Studio Pro 1.5. Within my film I have several 15 second clips that are each a compilation of a single frame repeated many times so as to get the look of a still picture on the screen. I exported my film as a F.C.P. movie and when I watch it in Quicktime everything appears fine (as it does when I play it from within F.C.P.). However, when I author the DVD with Studio Pro (tried it w/ iDVD also and received the same unwanted result)those clips "jitter" or shake back and forth so I get a blurry image instead of a still, clear image like in F.C.P.
I burn the DVD w/ the internal combo drive on my Powerbook. I have never had an issue w/ any DVD that I have editied, authored or burned on this computer or w/ these programs.
Any ideas?
Thanks, Ryan
Powerbook G4 Mac OS X (10.2.x) F.C.P. 3.0; DVD Studio Pro 1.5

Your answer is here:
http://discussions.apple.com/thread.jspa?threadID=675876&tstart=0

What compression to use when Exporting HD video from final cut pro PAL setting

Hi there
I'm trying to export my HD video from Final cut Pro so that I can edit it in DVD studio Pro. I initially exported it on H.264 setting however it then gives me the message 'NTSC assets cannot be imported into PAL projects' It was edited with PAL setting so I think it must be the conversion but i'm not sure which option to use.....been really struggling to get the 1 hour footage under 4.5gb without losing too much quality...
Any advice greatly appreciated!
thanks

Just to add two suggestions.
1) Consider putting your four movies on two disks.
2) Bring your movies into Compressor and duplicate the stock DVD setting. In the Encoding pane of the Inspector, select a CBR and dial it back to around 6.2 to 6.5 Mbs. In Preview mark a small section and submit; you'll get 2 elementary streams, with m2v and AC3 extensions. Bring that into DVDSP and evaluate results. Adjust as necessary. (This is to avoid waiting out very long encodes and then having to start again from scratch if you get disappointing results.)
Russ

Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

Is it possible to create DVD Templates with Motion for burning Blue Ray DVDs from Final Cut Pro X?

As far as I know, motion templates can only be used with DVD Studio Pro. FCP X only lets you add a background image to the DVD menu.

When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?

There have been a lot of recent reports of difficulties sharing to DVD, but haven't been hearing about unreadable disks. Posibly there was an encoding error. Or it could have been bad media (blank disk).
Does it play in your Mac?
What brand of disks are you using?
Russ

Exporting from Final Cut Pro for DVD Studio Pro

In the recent DVDs I've made, the quality seems lower than it has before. I don't think I've changed anything, but I was wondering what is the best format to export a clip from Final Cut Pro and the best way to encode those clips in DVD Studio Pro. Thanks for all your help!
Erin

The best and only format is mpeg2/m2v.
The encoding rate for video is based on the length of the sequence in h/m/s.
They should not be encoded in DVDSP, but exported as a self contained with current settings, no recompression and dropped into Compressor.
Based on length and the type of footage, elect a preset for video and elect Dolby 2 for audio

Dvd burned from final cut pro hackes when viewed on Bose dvdplayer

When I burn a DVD from final cut pro x (disc creator) on my MAC book pro,(MAC IOS lion 10.7.5) it can be viewed on my computer without problems, but hackes when viewede on my Bose dvd player, even though it works fine with purchased dvds. What is the problem?

Brand of DVD media can cause this. Not all DVD players will work with all self-burned DVDs. They are flimsy soft plastic and prone to errors. This is not an FCPX issue, but simply a self-burned DVD issue. Try a different brand of DVD media.

Burning a video from Final Cut Pro using iDVD

When I export and save my video from Final Cut Pro to a folder (export->Using Quick Time Conversion). When I do that there are several different videos that are saved in my folder (ie-Kelly Michelle; Kelly Michelle-av1; Kelly Michelle-av2; Kelly Michelle-av3; Kelly Michelle-av4; Kelly Michelle-av5).
iDVD is the program I need to use, I do not have any other programs. Therefore, I import the file to iDVD and once everything is ready in iDVD I try to burn the dvd. However, in the last stages of burning a window pops up and says that "an error was found during the burning process". It does not tell me what kind of an error it is. Does anyone have any advice or a step by step process that I need to do in order to burn my dvd successfully.

The simplest way to prepare a video for iDVD is to *Export/Quicktime Movie* (NOT Using Quicktime Conversion), select Current Settings, Audio and Video and, depending on your needs, other 2 options:
o- +Make Movie Self-Contained+ is preferred to have an independent movie (you can move the exported file, you can continue editing your FCP project before burning the exported version, etc.) but requires more disk space and more time for exporting.
o- +Chapter Markers+ (NOT All Chapters) must be selected if you created Chapter Markers in FCP (markers in the timeline, not the clip, and clicked the Add Chapter Marker button in the marker dialog).
The resulting .mov file (whether self-contained or reference) may be easily imported to iDVD.
Piero

Why does Compressor take so long to export a 10 minute video clip from Final Cut Pro?

I've been trying export a 10 minute clip from Final Cut Pro. so it can be used with DVD Studio Pro and burned. However, the rendering process has taken 12 hours! The clip I'm exporting has minimal effects, no music, and is in 1080i 30fps. Does anyone know what's going on or what I can do to speed up the process?

First: How are you exporting? Are you using the Share feature or Send to Compressor?
Second: You haven't said anything about your system configuration or really very much about your movie. What is its format… is it really 30fps or 29.97? Whatever it is, are the project settings identical to the clip properties, or were they changed?
Russ

Retrieving imported AVCHD files from Final Cut Pro X

Hi there, does anyone know how to retrieve raw AVCHD clips from Final Cut Pro X, after they have been imported? I shot some footage on my GH2 and it DID import from the camera into FCP X, but it's not running smooth at all. I heard that it's better to convert the files into pro res first, but I wanted to see if it worked. It does work, but not very well. So now I want to find the original video files I imported and convert them into pro res and then import again. Anyone had experience with this?

I think it all comes back to work flow. The whole reason I have opted to convert the original files to pro res is because it is choppy in the timeline when I'm editing. It seems it's true that FCP X really prefers to work with 'optimized media'...or Pro Res instead of reformatted versions of AVCHD. I would like to work with this original format, mainl because the footage isn't as compressed and hasn't lost a generation...and look absolutely pure and gorgeous in high bit rate from my GH2, however, what choice do I have but to convert to Pro Res if I am unable to edit smoothly? I think Ian had the right idea when he said to compare the footage of both, but again, if I can't even edit in AVCHD then what's the point? I think Apple needs to rectify this in the next update as I'm sure there are so many users out there who would prefer editing in this original format. Is there a noticeable loss of quality, that's what I am curious about.

"media server application expectly quit" when submitting from final cut pro

browsing through the list, it seems the problem couldn´t be solved so far.
doing some systematic testing, the following riddle shows up:
... when adding a QT ref movie (or movie) directly to the compressor batch list and submit to the cluster, everything runs fine.
... when exporting from final cut pro:
menu -> export -> using compressor ...
submitting in compressor using:
1) Cluster: this computer: everything keeps running fine.
2) Cluster: MylovelyCluster ....
the job fails with the message "Failed: HOST [clusternode_name.local] media server application unexpectedly quit"
since there is 5TB + of data to be compressed, copying files to the render nodes is not an option. all data is on a shared xraid, connected via giganet.
Any ideas, any hints appreciated !
regards,
p.s. Anybody running an XSAN having the same issues?
G5s, G4s, G3s, macminis, powerbooks Mac OS X (10.4.7) xraid

... well, the answer is in other topics.
showstopper explains it patently again and again ...
thanks from here.
shortly: when submitting from FCP, every node HAS to have FCP installed and MUST have access to the same relative file path (mounted shared volume). If the volume is not present, the render node will open the reconnect media dialogue and waits for user input.

Exporting From Final Cut Pro 5.0

Hello,
I need to export my work from Final Cut Pro 5.0 to a Quicktime Movie with the following settings -
Compression: H.264
Frame Rate: 15fps
Bit Rate: 200k
Is this posible without loosing the quality of the video footage? The footage was capture from a MiniDV tape.

Is this posible without loosing the quality of the video footage? The footage was capture from a MiniDV tape.
If you want full resolution 640 x 480 then 200Kbps isn't going to look very good. As a guide you can note that Apple is using about 600Kbps to encode the iTunes video content and that has a resolution of only 320 x 240. However, since you're only using a frame rate of 15fps you should be able to produce good looking content at just over 1Mbps for 640 x 480.
Of course, it does depend upon the nature of your source video (the subject). Simple "talking head" shots could go lower, while rapid action material might need considerably more than 1Mbps (along with a higher frame rate).

Best export method of footage from Final Cut Express to DVD?

I'm exporting footage from Final Cut Express using Quicktime Player and then burning the footage to DVD using iDVD.
The end result on DVD has very jagged interlacing (or noise) on objects in motion which aren't present when viewing the footage on FC. I don't think the problem is with iDVD (I assume I'm burning a pristine copy of an already reduced-quality clip).
Are there any changes I can make to the system preferences either on FC or Quicktime Player to reduce or prevent loss of digital information, or can anyone suggest better methods of export from Final Cut Express to DVD?

Hello
I'm not sure if this is relevant:
I've been using the Quicktime Conversion settings;
http://www.locationstudio.net/Settings.jpg
29.97 Frame Rate
Highest Quality
NTSC/PRO
I was under the impression that this was usually best - haven't had any problems with iDVD
Mike

TS1233 How do I get chapter markers for iDVD from Final Cut Pro X?

It seems like a tremendous short-coming that Final Cut Pro X doesn't allow for chapter markers that can be used in iDVD or DVD Pro. Surely there is some way to get used-defined markers from Final Cut Pro X or at least re-define the Final Cut Pro X markers in the DVD authoring applications. Does anyone know how to do this?

I have decided to say that my problem is solved by the work-a-rounds that have been submitted. I STILL don't like the fact tha Apple has decided that DVD's are a thing of the past and therefore (chapter) markers are of no use. That may be true is the publishing world of YouTube, Vimeo, etc. but it certainly NOT true for many of us advanced hobbyists that still like distribution on DVD's to our friends or a more localized (private) community -- especially to those who are not computer literate. If Apple wants to exclude us from their customer base, I suggest that base will become even smaller than their competitors who still have chapter markers in their products. I'll get off my soapbox now. . .

Propper Compressions: from Final Cut Pro to DVD Studio Pro?

Similar Messages

Maybe you are looking for