ProRes for Mac and ? for Windows

Hello,
I'm using Premiere CS6 now with Windows. I'd like to know witch codec to use when exporting 5DMKII with good quality.
I used to export ProRes 422 LT with FCP7.
Thank you.

Here is a link, that Jeff B. posted on Codec downloads.
http://forums.adobe.com/message/4230363#4230363
I have downloaded from there and it seems ok.
For Avid DNxHD, you can get it here:
http://avid.force.com/pkb/articles/en_US/Compatibility/en372311
/Ulf

Similar Messages

  • I plugged my ipod into my mac and a window popped up saying that it was in recovery mode and needed to be restored

    i plugged my ipod into my mac and a window popped up saying that it was in recovery mode and needed to be restored.  I didn't back up my music files.  Am I doomed to lose them?

    http://support.apple.com/kb/TS2690
    iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert

  • I recently brought a mac and downloaded windows with the help of boot camp and by mistake i installed windows 7 ultimate version whereas i had the cd and serial key of windows home premium i started installing windows home premium from windows 7 cont...

    I recently brought a mac and downloaded windows with the help of boot camp and by mistake i installed windows 7 ultimate version whereas i had the cd and serial key of windows home premium i started installing windows home premium from windows 7 ULTIMATE then after the exctraction of files and everything the windows setup came and my mouse and keyboard stopped working and i dont know how to open mac os x there is no option anywhere?? what shall i do pls help!!!!if there are any keyboard shortcut key to open mac os x or boot camp pls mention.

    For Boot Camp issues please repost in the Boot Camp forum located by clicking Boot Camp

  • Can I set up a home network between my mac and a windows based laptop?

    Can I set up a homenetwork between my mac and a windows based laptop?

    The router is te network hub.
    I have a network between my Linux box and my PC  and my MBP because they are both hooked up the the same router.  All you need is the "192.168.1.x" address of the destination box and the software needed for the type of conection (VNC, SSH, etc).
    What helps is to set up "static routing" for all boxes so the IP address does not change.  I have set up my Linux box to be 192.168.1.100 always, using the MAC (the ethernet abbreviation MAC, not Macintosh) in the router's "static routing" table.
    Exactly which screens you need in the router depends on te router make and the internal management screens.  The router maker should have either online (if they offer it past a 1 year from purchase) or online help found through Google.  A MAC address is a set of 6 hexadecimal number separated by ":" -- an example (which I imagine will match *some* MAC *somewhere* is "6A:13:F2:72:E4:A1".

  • Can I install the traditional CS6 product (not creative cloud) on a mac and a windows pc?

    Hey,
    I already know that with creative cloud I can install CS6 on both a mac and a windows pc.
    But what about the traditional CS6 version (without creative cloud membership).
    Is it possible to install on both mac and windows pc, too, or is it restricted to one operating system, like in CS5.5 still?

    Traditional versions (perpetual licenses) are still platform specific: Windows only or Mac only.
    Installation on both Mac and PC is one of the USPs (Unique Selling Propositions) of the Cloud versions.

  • Can I install Windows 8 (DEMO) on a MAC and play windows based games ?

    Can I install Windows 8 (DEMO) on a MAC and play windows based games ?

    I installed the Developer beta with Bootcamp Assistant yesterday and was very impressed with the ease of the installation. Unfortunately, and I don't know if this is a problem with my video BIOS on my Macbook Air, but Windows 8 installs with two screens split horizontally - so it's effectively useless.
    I tried 3 times and gave up. The same thing happens with Linux distributions, however with Linux I can pass "nomodeset" on the kernel command line which fixes it. I don't know how to do that in Windows.
    This was happening with both 64x and 32-bit Win8 fwiw.
    Oh, also...when I was trying to play around with Bootcamp.exe inside Windows 8, I remember a message popping up saying Bootcamp is only configurable with Windows 7 ISOs. But aside from the kernel graphics issues and some driver compatibility problems, Bootcamp loaded the Win8 ISOs fine.

  • Can i use an ipod on a mac and a windows computer?

    Can iPod Classic be used on a Mac and a Windows computer, or do I have to choose only one?

    Yes, it can. Restore it on the PC; doing so on the Mac will put it in a format the PC can't use.
    (79280)

  • I have  my photoshop cc installed on my Mac and my windows laptop is it true that I can only use one or the other now? and if this is the case if my mac were turned off should my laptop now work? I am on the photoshop photography program

    i have  my photoshop cc installed on my Mac and my windows laptop is it true that I can only use one or the other now? and if this is the case if my mac were turned off should my laptop now work? I am on the photoshop photography program its just that i have never noticed tho before i have my mac turned on and the laptop PS works fine on the Mac but not on the Laptop

    Hello,
    see >>> http://helpx.adobe.com/creative-cloud/help/install-apps.html  here >>> How many computers can I install on
    I quote: You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each.
    If you install on a third computer, it will request you to de-activate on the other two computers. You can then reactivate one of the previous two computers, and use Creative Cloud apps on it.
    Good luck!
    Hans-Günter

  • Encoding files in prores for windows for free

    it's chiristmas and i wanted to share an app for converting almost any video file to prores[HQ] & proress 444. it's a perfect utility for people who transfer files between a pc and a mac.
    http://eyeframeconverter.wordpress.com/

    Thanks Jim, I can't export to WMV out of Premiere or Media Encoder. I use Episode to make my WMV files, and since Episode doesn't take MPEG in from Premiere (sigh)
    I have to first make them in Quicktimes..
    But yes! Anything Windows Media Player can handle... should I just go with the 5GB MPG files? No way for me to test, I'm on a Mac and these are playing on a PC
    thanks for your help

  • How can I use my external hard drive on my mac and a windows computer?

    Hello,
    Can anyone help...I have recently purchased a new external hard drive for my macbook pro, it is a 1TB hard drive. I use it for time machine back ups which only takes up about 250gb of space so obviously I have a lot more to use. I'm at University and the computers there are Windows so I'm hoping to be able to drag my uni work to my external HD and connect it to the windows computers at my university so that I have my work there as well - however I'm not sure how I should format my HD???
    Thanks

    You will eventually use all of that 1TB external for the Time Machine backups, that is if you do regular Time Machine backups (It is NOT a One Time thing). So using that same external for anything else is not a good idea.
    You would be much better off buying a large USB thumb drive, like 64GBs in size, and format that to one of the Windows formates that both Mac OS X and Windows can read from and write to. Those would be FAT32 and exFAT. If you are moving file less than 4GBs in size then format it FAT32. You can then copy files to it from your Mac and Read those files on the Windows PCs the school has and just stick that Thumb drive in your pocket.

  • Backing up a Mac and a Windows machine?

    Hi,
    Can Time Capsule be partition to backup a Mac on one of the partitions and a Windows machine on the other partition over the wireless network? and are there any settings I should be aware of?
    Running OSX ver. 10.5.6 and Windows Vista Home premium on the other machine.
    Thank you.

    Don't think so because once you set the format type for the Mac its encompasses the entire hard drive.
    Message was edited by: Smokerz

  • OK to have separate virus progams in Mac and in Windows?

    I am advised to have virus protection in the Windows XP program I have just installed in Parallels. I already have McAfee Virus Scan on my Mac. Is it okay to load in the McAfee Virus Scan software for Windows into Windows? I saw a warning about having two virus programs operating on the same computer, and just want to make sure this will not be a problem. Thanks

    Hi Barbara,
    Since the Windows version of McAffe Scan will only scan inside your Parallels Windows and not the OSX side, it is safe to do what you do/have.
    Besides quite a lot are using two or more Virus Scanner with their Windows as long as only one is running as 'On-Access Scanner' and the others are used as 'On-Demand Scanner'.
    Regards
    Stefan

  • Can I format an iPod to work on a mac and a windows?

    I have a mac and a dell and I was wondering if it is possible to do something so that I can use it on both. If so, what is that?

    Format it on the Windows PC (with iPod Updater), and it will work on the Mac as well, although it is unsupported by Apple. Music transfer will also be a bit slower on the Mac, but is still pretty fast. If you want to syncronize the music between the two computers as well, it gets more tricky, because iTunes only syncronizes one way - from the computer to the iPod and not the other way around. There are solutions for this, though, but as a start, I would not use the auto-sync feature in iTunes.
    PowerBook G4 1GHz 15   Mac OS X (10.4.3)  

  • Can same iPod connect to both a Mac and a Windows PC?

    I have a PC at work and a Mac at home. I'd like to be able to use both computers to transfer songs to my iPod Nano. Can I do that, or do iPods need to be associated with only one computer??

    Probably the easiest way to use an iPod on both Mac and Windows computers is to format the iPod (using iPod Updater) using the PC. This will force your iPod to use the Windows file system (FAT32) which both the Mac and PC can read from and write to without the help of additional software.
    Of course then all your software updates for the iPod will have to be done on Windows.


    If you need to use a Mac (HFS+) formatted iPod on a Windows PC, you'll need to install some 3rd party software such as XPlay 2.0 or MacDrive (which you can get from MediaFour Software). This will enable your Windows PC to read a Mac-formatted iPod.

  • I need to create a wireless network with a Mac and a Windows PC...

    ...and I have made certain assumptions. Are they right?
    First, the background. We have two ISPs: the Mac is connected to cable broadband via Airport Express (the cable point and the Mac are in separate rooms); the PC laptop is connected to broadband down the phoneline via a wireless Netgear modem (or router? not sure what the difference is). Our printer is connected via USB cable to the Mac and we'd like to be able to print wirelessly from the PC. Ideally, I'd like both computers to access the cable broadband.
    Assumption 1: I need to create "A Network";
    Assumption 2: Because the PC may on occasion be used beyond the range of Airport that network should access the web via the Netgear modem/router;
    Assumption 3: My first step is to plug the Netgear modem/router into the cable modem and reset the Mac to work with the Netgear thing.
    Assumption 4: Next step is to change network settings on the PC to go online via cable.
    Assumption 5: Then I weave some voodoo to create A Network (sorry, but this is virgin territory).

    I would recommend that you set up your home network to have one single broadband access point for one and only one wireless router/modem combo (Netgear), that has NAT enabled and DHCP enabled. Then, I believe that Airport Extreme Base Stations can be set up in a "range extender" mode (sorry I don't have one so don't know all the details on this). It would not be set up as a router administering NAT or DHCP, it would be set up more like as if it were a hub (analogy: AC electrical power "octopus" outlet). Lastly, this website has a ton of information on how to set up Macs and PCs to do file sharing, printer sharing, etc., in either direction.

  • My mom and me want to use the iPod on two computers, one Mac and one Windows. Is that possible or will it destroy the iPod?

    My mom has a Windows computer, I have a Mac, and we have an iPod nano 6th generation. Is it possible to use the iPod with both the Windows and the Mac? And does it add the music and playlists but not delete?
    Thank you,
    Jan

    Hey, thank you so much.
    But now: I can add Musik, but it won't load the Cs-covers and the play lists on the iPod. I did it the way they tell me to do it. I just grabbed it and put it into the iPod. I can see the lists on the computer, but not on hte iPod in the menu.
    how can I get the play lists?
    Thank you.
    Jan

Maybe you are looking for

  • How do I reset my Apple ID email that is already locked in when it asks me for password when I turn on iPod touch?

    I recently changed cable providers, so my email changed too.  I was able to change my iMac to a new email and reset the password, but I am not able to use that email with my iPod touch.  It still has my old email locked in when it asks me for my pass

  • Issue in custom BAPi

    Hi, We had created a custom BAPI. This BAPI is having a method, which in turn calls a custom FM (RFC enabled). This was working fine but due to some requirement we had to change the structure of one of the parameter used in the interface of the FM. T

  • Errors in Weblogic server log for Weblogic Portal

    Hi, I apologize if the question has been posted and answered.. I had searched but couldn't find anything in this forum. My post is a bit lengthy as I will be providing as much details as possible.. sorry about that.. :) I am new to Weblogic server an

  • Best way to load initial TimesTen database

    I have a customer that wants to use TimesTen as a pure in-memory database. This IMDB has about 65 tables some having data upwards of 6 million rows. What is the best way to load this data? There is no cache-connect option being used. I am thinking in

  • Question about the EDT

    Hi everybody, Here my issue: I have to write a little something about EDT and the use of SwingUtilities to avoid common issues with the use of Swing. Sure of my knowledge I wrote a little exemple using a progressBar to show how it doesn't work when y