Prores renders disappearing while working in project. Please Help?
Hi There,
I am having a problem when I render a sequence, creating all the video preview files and as i continue to work on the sequence, or task switch and come back to that sequence, the render files are disappearing (ie. going from green to yellow or red) and having to be re-rendered before export.
General
Editing mode: Custom
Timebase: 29.97fps
Video Settings
Frame size: 1920h 1080v (1.0000)
Frame rate: 29.97 frames/second
Pixel Aspect Ratio: Square Pixels (1.0)
Fields: Upper Field First
Audio Settings
Sample rate: 48000 samples/second
RENDER:
Quicktime
Prores422
1920x1080
Max Render Quality (Checked)
Composite in Linear Colour (Checked)
Footage being rendered and going offline is prores422 1080i60 from an EVS XT-3 with a three way colour correction, and brightness/contrast filters on it
I am trying to work in an end to end prores workflow with the EVS XT-3 (hence the necessity for prores all the way through)
Preview files:
Prores422
I am running Premiere Pro CC on an AFP connected NAS over gigE (jumbo frames enabled on all components, Mac Mini running OSX server 10.8 fibre connected to a Sonnet RAID)
Have tried with projects set on local drive and also on NAS.
It appears to be something with the generation of peak files that is throwing the renders off each time? Even when you re-render. They then appear to go back offline.
Any help or ideas would be great!
Thanks
Chris
Hi smith,
Something tells me that the files are getting confused. If new times are written into the regeneration of peak files by the server, then those files cannot be relinked. I'll look around for some answers, I know I have heard about this problem before somewhere.
Kevin
Similar Messages
-
I am attempting to upgrade from Adobe Premier Elements 9 to Adobe Premier Elements 13 after using 13's trial version for a few weeks. I am unable to find where and how to do this without losing the project I have been working on. Please help?
Vere Clarke
Premiere Elements 9.0/9.0.1 and Premiere Elements 13 are standalone products.
So, you can have both on the same computer, but only open one for your work.
The classical recommendation is to finish a project in the version in which it was created since there
is no guarantee that a project from an earlier version will open in the later version. Probably will, but
no guarantees. And, when you do explore this, do it from a copy of the earlier version project. Once you
take the earlier version project into a later version one, you cannot go back to edit the later version edited
project in the earlier version program.
If you have both versions (9 and 13) on the same computer and you have not moved, deleted, renamed any of the version 9's files/folders,
right click the saved closed Premiere Elements 9.0/9.0.1 project file, select Open With, and then Adobe Premiere Elements 13.
(Your 9.0/9.0.1 saved closed project file should be found in Libraries/Documents/Adobe/Premiere Elements/9.0.)
Please review and consider. If any questions or need clarification, please do not hesitate to let me know.
Thank you.
ATR -
My Bluetooth has disappeared and I have tried just about everything on the internet. When I click on Bluetooth file exchange it says hardware not found. I tried resetting everything as well nothing is working for me please help because now my facetime doesn’t work neither does photo booth and now I cannot text people off my laptop unless they have iMessage.
If you followed the instructions in the support article exactly (leaving the machine off for two minutes), then it has a hardware fault. Take it to an Apple Store or other authorized service provider for repair.
-
Hello, All my spreadsheets disappeared while working on one of them, what to do?
All my spreadsheets disappeared while working on one of them, what to do?
I just did a reset all settings on both.
Will see where this gets me.
Thank you for your helpfull input. -
Hi, I am wondering why my iphone won't send pictures through messages, I have MMS on and I have tried sending it with 3G on aswell and still doesn't work. Someone please help me :)
Hey lozza567,
Thanks for the question. I understand that you are experiencing issues sending MMS messages. The following resource may provide a solution:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Issues with sending and receiving MMS
You will need these to send and receive MMS:
- An iPhone 3G or later.
- iOS 3.1 or later.
- A cellular data connection. MMS isn't available if you are using only Wi-Fi.
- A domestic MMS plan from your cellular provider. You may need an international messaging plan to send MMS to an international contact. Contact your carrier for more information.
- A roaming MMS when using a cellular provider's network different from your billing cellular provider's network. Learn more about roaming and contact your carrier for more information.
To resolve issues with sending and receiving MMS, follow these steps first
1. Go to Settings and turn airplane mode off.
2. Go to Settings > Messages and turn MMS Messaging on.
3. Go to Settings > Cellular and turn Cellular Data on.
4. Go to Settings > Cellular and turn Data Roaming on if you are roaming on a cellular provider network different from your billing provider's network.
5. Verify that you have a cellular data connection in the status bar at the top left of your iPhone.
6. Go to Settings and turn Wi-Fi off. Open Safari and navigate to www.apple.com to verify that you have a data connection. Turn Wi-Fi back on to continue using Wi-Fi for other features. If your cellular data connection isn't available, follow these steps.
7. Verify that you can send and receive SMS. If you are unable to send and receive SMS, see the "Issues with sending and receiving SMS" section, above.
8. MMS may not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports.
9. Restart your iPhone.
10. Tap Settings > General > Reset > Reset Network Settings on your iPhone.
11. Reseat your SIM card.
If you are still unable to send or receive MMS, follow these steps
1. Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
2. Go to Settings > Messages and turn on group messaging if you are sending a group message.
3. Make sure that you are using the area code with the contact's phone number. When sending messages internationally, you also need the contact's international code.
4. Verify a "Pay as you go" MMS plan has enough available balance. Contact your carrier if unsure of your MMS plan or available balance.
5. If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
6. If the issue occurs with a specific contact or contacts, delete and re-create the contact from the Contacts application. Create a new message to the newly created contact and try again.
7. Back up and restore your iPhone as new.
8. If your carrier has recently ported your phone number, the porting process may not be complete. Contact your carrier to confirm that the porting process is complete.
9. Contact your carrier to verify that you are provisioned to send SMS and are in an area with cellular coverage.
10. Contact your carrier to verify that there are no blocks or filters placed on your wireless account preventing you from sending SMS.
11. Your carrier may require APN settings to be modified to use MMS. Learn more about when you should adjust APN settings.
Thanks,
Matt M. -
Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS
Many, many thanks for both of you Todd and Rick.
to Rick:
I suppose you mean the Color Settings in Project Settings as follows:
- Working Space: None
- Match Legacy ... Gamma Adjustments checked ON
But it does not correct the colors in effects. And checking or unchecking Make Movie/Output Module Settings/Color Management/Profile/Preserve RGB does not make any difference.
to both of you:
Those parts of the video image that does not have color effects are just fine. In these parts the color is preserved when reimporting to FCP. However, those parts having color effects (except Levels, as decribed earlier) have altered color results. So, only the parts having effects affecting color are misinterpreted in the image area. The mismatch is of course seen in AE, before making the movie.
What I ment with "Color Management not working properly" is that (instead of "disabling" it) Color Management does not seem to be able to correct this "misinterpretation" or difference in effect handling between AE 6 and 10.
So, would you have any solution for this problem?
Again, many thanks for your fast replies! -
After iPhoto quit unexpectedly, the last 5 months of photos disappeared from my library. Please help! I can't find them anywhere.
You're using iPhoto 6?
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 6* library:
Note this will give you a working library with the same Rolls and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library on your desktop and find the Originals folder. From the Originals folder drag the individual Roll Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption. -
When i disconnect my iPod 2nd Gen from my laptop, its display goes off and working freezes. Please help me.
The computer freezes? There may be something wrong with the USB port. If the laptop has more than one port, does this happen on any port? If you are disconnecting the shuffle cable from the computer, does it make any difference if you disconnect the shuffle at the other end of the cable first, then disconnect the cable from computer? Or if you currently disconnect the shuffle from cable first, try it the other way.
You may be able to work around this problem, if you get a self-powered USB hub. Something like this one
http://eshop.macsales.com/item/NewerTech/USB2HB7PRO/
There are many choices, but be sure to get one that has its own power supply. You can leave the shuffle cable connected to the hub, and connect the shuffle to the hub, instead of directly to the computer. This may provide a "buffer" for whatever is causing your laptop to shut off when the shuffle is disconnected. Since the hub has its own power supply, it will not rely on the computer for power to re-charge the battery. -
i have updated to maverick from mountain lion.initially my mac book pro was snow leopard.the multitrack touch pad swapping the page to get back to previous page is not happening in finder,it is only working in safari.please help me how to get that swiping gesture in finder
Hi..
I repled to you here > https://discussions.apple.com/message/25598596#25598596
Please do not start duplicate topics. It makes it that much harder to assist you. -
Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
Bluetooth Driver In Windows 8.1 is Not Working after upgrading please help (pavilion g6 2008Tx)
what cAN i do to make it work?please helpHi:
If your model uses a Ralink wireless card, see if installing this bluetooth driver works.
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135494_1 -
I clicked update for facebook And now my iPod touch 4th gen won't let me download the Facebook app I've turned it on and off like 5 times and it still won't work can you please help me
Seems to be an Apple or FB app problem. Nothing you can do but wait for it to be fixed.
-
Hello, the 'Save As' dialog box used to allow the backspace button to go up one level in the directory when the focus is in the folder contents box but it does not work any more, please help. BTW the same 'Save As' dialog in other applications still allow the backspace button to go up one level in the directory.
cor-el,
I kept forgetting and procrastinating about following your instructions, since I have internet access only for limited amounts of time and usually I am busy with important tasks when I am.
Out of the blue, the problem corrected itself (the Save As box started to open full screen, then shrunk down to a normal size and the edges can now be dragged to a custom size).
Even the copy and paste problem in the filenaming area seems to have been less troublesome lately even though there have been no updates to Firefox in a few weeks.
Even though I marked the solution as not helpful, the problem has in fact been resolved. I will save the solution instructions in case the issue returns. -
InDesign CS5 is not opening after deactivation/activation. How can I fix this? Illustrator and Photoshop open and are working fine. Please help!
First of all, thank you for replying so promptly to my posts this morning!
I can't remember how I got the software on his computer, but I'm pretty sure it wasn't through migration assistant.
I was looking into doing an uninstall of InDesign and a fresh install. However, I initially downloaded the CS5 suite digitally and I can't find out how I am able to perform a fresh install of InDesign. Do you know where I find this info or gain access to download just InDesign again? I can't seem to find anything in my Adobe account that shows where I might do another download. -
I want to buy the double coins from the game subway surfers! But they told me to contact the itunes support! I don't know why it's not working.. Please help! iPhone 4ss
These are user-to-user forums, you are not talking to Apple here. You can contact iTunes support via this page and ask them why the message is appearing : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then probably Purchases, Billing & Redemption
-
I recently downloaded iMovie on my iPhone 5 and it is telling me to connect to wifi or use itunes to download iMovie well I have done both and it is still not working can someone please help me?
Hi troy157,
I'm sorry you are having issues with the iMovie app you purchased for your iPhone5.
The first thing I would suggest is to log out of your iTunes Account on your iPhone, turn the iPhone off and then on again, and see if app finishes downloading/updating.
Settings > iTunes & App Stores > Tap on your Apple ID account > Tap Sign Out
If the issues persists, the article below will give you a few more troubleshooting steps:
iOS: Troubleshooting applications purchased from the App Store
Try the following steps to resolve your issue, testing the app after each step.
1. Update your device software
Update your device to the latest version of iOS.
2. Check for app updates
Ensure that your apps are up to date:
Open the App Store and tap Updates. If updates are available, tap Update All.
When prompted, enter your iTunes Store account information. App Store will then download and install the application updates.
Note: Some applications may require a Wi-Fi connection to update.3. Install another app from the App Store
4. Restart the application
If the issue affects only a single app, try closing just that app:
Press the Home button to return to the Home screen.
Double-tap the Home button to display recent apps.
Tap and hold the affected app until the red minus appears.
Tap the red minus to quit the app.
Press the Home button, then restart the app.
5. Restart your device
Hold the Sleep/Wake button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.6. Reinstall the affected application
Remove the application from your device and reinstall it.
Touch and hold any application icon on the Home Screen until the icons start to wiggle.
Tap the "x" in the corner of the application you want to delete.
Tap Delete to remove the application and all of its data from your device.
Press the Home button.
Go to the App Store.
Search for the application and then download it again.
Note: If it is a paid app, ensure you are using the iTunes account you purchased the app with originally. If it is not, you will be charged for the app again. For more information regarding downloading previously purchased items, see this article.
I hope this information helps ....
Have a great day!
- Judy
Maybe you are looking for
-
Connecting a serial wacom tablet to the new iMac
Hello, At home I have an old PC (please don't laugh, I use a Mac at work) and I hope to change this to the new iMac very soon. I have a A4 wacom tablet connected to the PC via the serial port. Is it possible to get an adapter (serial to USB) that wil
-
Upgrade to Win 7 Prem from backup
I'm gettting ready to drop some $$ on a new desktop and need to know how I can EASILY restore my apps and files from my Iomega drive. All my stuff is on Win XP sp2 as backup files. Will the apps (old ones like Quicken 2004) work under Win 7? Please,
-
Airport base station and U Verse
Does anyone know how to get an Airport Base Station to connect wirelessly to an ATT U VERSE 2 WIRE modem? I've used Airport Utility to get the Base Station to join my network but it never finds the ATT network. Thank you, Charlie
-
Build a target group by Partner Function
Hi forum friends Please I need a help. I want to create a target group by Partner function (BUT100). I have tried to use the join: BUT100(partner field) + BUT0CC(Partner) + BUT051(Partner1) + BUT000(Partner) but it doenst work. How can i do it? Thank
-
I couldn't find a place where this really fit-it's an audio plugin question, but I don't use the Pro Software-so I put it in the general OSX category; feel free to move it. My issue is with the DVC PRO HD Audio plugin (/Library/Audio/Plug-Ins/HAL/DVC