Protect and End protect in SAPSCript.

Hi all
I have a sapscript wherein the texts comes from different text elements.
/E    581
/E   582
I need to put the texts from these text elements in one page.
Can the control commands PROTECT ...ENDPROTECT weritten in different text elements help in achieveing this. 
code as follow:
/E    581
/:     PROTECT
/E   582
/:     ENDPROTECT
Pls provide your inputs.
Regards,
Stock

Hi,
we have to use those within the text elements...
protect endprotect should be used with in a text element
so that i can protect the page breaks
/E   abc
protect
endprotect
/e   abc1
protect
endprotect
thanks & regards,
Venkatesh

Similar Messages

  • How to use protect and endprotect in smart form

    hi to all experts,
                        im still begineer in smart form , i have two headings like
    company_code:              purchase doc no:
    after this i have a table to be displayed with four columns
    what i want is the whole data should not be split by a page break
    i know this can be achieved by using protect and end protect in sap scripts how to implement in smart form

    probably u have the table inside a loop or a folder or something....
    see this
    Page protection attribute
    Switch for page protection.
    Use
    Page protection switch.
    In some cases you may want to avoid that text is divided by a page break. Therefore, you can protect text sections with a page protection.
    Page protection can extend to
    a paragraph
    a text node
    all output within a folder, for example, several text nodes combined in this folder.
    a line type (table node)
    If on the current page there is not enough space left for the protected text, it is displayed entirely on the next page.
    So u can page protect a line in table...
    in the table node..goto tables tab and click the details tab-->select the line type and check the 'no page break'
    check box

  • Equivalent command in Reports like Sapscripts's PROTECT and ENDPROTECT

    Hi,
    What is the equivalent command in Reports like Sapscripts's PROTECT and ENDPROTECT?
    - Selva

    Hi,
    I don't think you have any particular command for that in reports. but if you are talking about headers / footers then you may use the events TOP-OF-PAGE and END-OF-PAGE.
    Regards,
    Anand Mandalika.

  • Is iMessage and FaceTime protected by end-to-end encryption

    Is iMessage and FaceTime protected by end-to-end encryption?
    Thanks

    You watched CitizenFour this week too, huh?
    Yes, both are encrypted end-to-end:
    https://www.apple.com/privacy/privacy-built-in/
    Matt

  • Protect and endprotect

    if we wrote code like this what happens
    protect
    protect
    endprotect
    endprotect

    hi,
    SAPscript provides the PROTECT .. ENDPROTECT command pair to allow you to define the areas to be protected against a page break on an individual basis. If you enclose the text to be protected in these commands, then SAPscript will ensure that each line of this text is printed together on the same page.
    If the complete text fits in the space remaining on the current page, then it is output on that page just as it would be if no PROTECT command had been used. If, however, the remaining space is not sufficient for the text, then the PROTECT command has the same effect as a NEW-PAGE command and text is printed on a new page.
    Thus the PROTECT/ENDPROTECT commands may be regarded as a kind of conditional NEW-PAGE command, the condition being whether or not the lines enclosed between the two commands fit in the space remaining in the current main window.
    Syntax:
    /: PROTECT
    /: ENDPROTECT
    The text lines to be protected are enclosed between the two commands.
    u2022 An ENDPROTECT command without a preceding PROTECT command has no effect.
    u2022 If the terminating ENDPROTECT is missing, then it will be assumed at the end of the text.
    u2022 PROTECT .. ENDPROTECT command pairs cannot be nested. If a second PROTECT command occurs before the first one has been terminated by an ENDPROTECT, it will be ignored.
    u2022 If the text enclosed by a PROTECT .. ENDPROTECT pair is itself too long for a single page, then a page break is generated immediately before the text and the text is output in the normal way. It is then unavoidable that a page break will occur at some point within the text.

  • How to make 32-bit-only add-ons work with Windows 7, Internet Explorer 11 and Enhanced Protected Mode enabled?

    Hi everybody,
    in IE10 I had the chance to use 32-bit-tabs even with EPM. In IE11 my 32-bit add-ons are all marked as "incompatible".
    Do you have any suggestions?
    Regards, Don

    Hi Don,
    The ”Enhanced Protected Mode ” feature of  Internet Explorer 11 in Windows 7 has been simplified and it doesn`t provide the “Enable 64-bit processes for Enhanced Protected Mode” feature. The Enhanced Protected  Mode is based on the 64 bit process.
    So that may be the reason.
    Here is a link for reference of Enhanced Protected Mode :
    Enhanced Protected Mode
    http://blogs.msdn.com/b/ie/archive/2012/03/14/enhanced-protected-mode.aspx
    Here is another link for reference(Pay attention Windows 7 part in the end) :
    How Internet Explorer Enhanced Protected Mode (EPM) is enabled under different configurations
    http://blogs.msdn.com/b/asiatech/archive/2013/12/25/how-internet-explorer-enhanced-protected-mode-epm-is-enabled-under-different-configurations.aspx
    Best regards 

  • Need help regd SCRIPT PROTECT and ENDPROTECT

    hi,
    Actually 3 elements are written in between
    CALL FUNCTION 'CONTROL_FORM'
    EXPORTING
    Command = 'PROTECT'
    and
    CALL FUNCTION 'CONTROL_FORM'
    EXPORTING
    Command = 'ENDPROTECT'
    I am getting the data for which the page is not enough.In this case it is printing 85% of data in the second page and 15% of data in the 3rd page by skipping 1st one eventhough size of 1st page and 2nd page are equal.
    Please suggest me what is happening here .
    thanks
    SAM

    HI,
    You can try out Protect-End protect directly in the form itself by /:.
    If the data is enclosed in this way,
    Protect
    endprotect.
    It is protected for this particular call of the window.
    whereas,
    ENDPROTECT
    PROTECT
    captures the data uptil the next call of the window.
    This first scenario can be useful when you can estimate the amount of data you are printing and the later in random instances such as you want to print the details of flight pertaining to a Carrid to be existing on that page itself, it can be achieved using the second method, where the window is called for every change of carrid.
    Try it out as per your requirement
    Thanks and regards
    Sharath

  • Sony warrantys, care, tech and consumer protection complaint

    Sony - I am ready to contact consumer protection over the practices ...of your customer care and tech services department for televisions. I bought a tv in nov. 2014, in May 2015 a red line was down the screen. After several weeks with unhelpful tech & care we finally got someone to issue a replacement tv. First issue, you failed to wipe someone's personal information off the replacement so I had access to their digital content - BIG problem in my mind. Second, the tv failed - 6 flashing lights - in first 2 weeks. So now, they wanted to open a 2nd ticket. Opened that on a Monday. Called on Friday b/c hadn't heard anything and they said oh, we didn't have enough info so we closed the ticket. WHY DIDN'T you CALL!. So now I go through tech trouble shooting another time, yup it's busted, ok let's get another refurb to you. Week goes by, nothing, so call again. Hey there's one on the way. get the tv delivered today. Tv delivery company opens it, busted screen. They say sorry, you have to call again and open ANOTHER ticket. Why is it on us?  White glove delivery?  We're 3 tv's in now, you have to save money by actually providing service vs. what i've been through.  Anyway we call and end up in TECH instead of CARE yet again. Tech guy can't do anything, care doesn't answer. Well, we'll get back to you in two days is only answer i get. We've asked for supervisor and been told flat out NO. they wouldn't' transfer, wouldn't escalate. Oh and as a kicker I've literally had to give my credit card to 4 different people, 4 different times. Totally feel violated and unsafe. You have 24 hours to contact me or I will be filing complaints. I am DONE! 

    Hi Chompsslat, we appreciate the time you took to let us know about your concern. Please PM me your Event ID, day time phone number, model and serial number of the unit. I will review your file so we can further assist you. Thanks. - Charlie

  • I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password pro

    I have created a PDF and password protected it for view. However, when reading the PDF in Adobe Reader app on the iPad the commenting and annotation options are not available. Is there a way to allow commenting and annotation in the app while password protecting the document?

    Is there a setting that needs to be set to allow the annotation features?  I set password protection to open and then password for editing and set it to Any except page extraction, but it still did not give the annotation option

  • Error loading Virtual Machine Manager 2012 and Data Protection Manager 2012 modules together

    Hi.
    Very strange issue: when i try to load together Virtual Machine Manager 2012 and Data Protection Manager 2012 modules - script fails. If first loaded Virtual Machine Manager 2012 module:
    Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\ObjectModelCmdlet.dll because of the following error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property
    for more information.
    Loader Exceptions:
    Could not load type 'Microsoft.Internal.EnterpriseStorage.Dls.Utils.AlertTypes.AlertEnum' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    At C:\Program Files\Microsoft Data Protection Manager\DPM2012\bin\Modules\DataProtectionManager\DataProtectionManager.psm1:2 char:14
    + Import-Module <<<<  (Join-Path $cmdletDllPath ObjectModelCmdlet.dll)
        + CategoryInfo          : ResourceUnavailable: (:) [Import-Module], PSSnapInException
        + FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommand
    If first loaded DPM 2012 module::
    Import-Module : Cannot load Windows PowerShell snap-in C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\Microsoft.SystemCenter.VirtualMachineManager.dll because of the following error: Unable to load one or more of the requested
    types. Retrieve the LoaderExceptions property for more information.
    Loader Exceptions:
    Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.TypeConverterEnumHelper`1' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineException' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Method 'get_BootOrder' in type 'Microsoft.SystemCenter.VirtualMachineManager.ClientObjectHWSettingsSourceAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have
    an implementation.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Method 'get_BootOrder' in type 'HardwareConfigSettingsAdapter' from assembly 'Microsoft.SystemCenter.VirtualMachineManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does not have an implementation.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMStartAction' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMSCSIControllerType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.ServicingTypeValues' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.FabricCapabilityType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.SKUType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral,PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.VMComputerSystemState' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    Could not load type 'Microsoft.VirtualManager.Utils.CarmineObjectType' from assembly 'Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35'.
    At \\team\dfs\scripts\Admin\Scvmm\Move-VirtualMachine.ps1:103 char:16
    +         Import-Module <<<<  'C:\Program Files\Microsoft System Center 2012\Virtual Machine Manager\bin\psModules\virt
    ualmachinemanager\virtualmachinemanager.psd1';
        + CategoryInfo          : ResourceUnavailable: (:) [Import-Module], PSSnapInException
        + FullyQualifiedErrorId : PSSnapInLoadFailure,Microsoft.PowerShell.Commands.ImportModuleCommand

    Vote if you have same problem:
    https://connect.microsoft.com/PowerShell/feedback/details/873348/scvmm-and-scdpm-powershell-modules-cant-work-together

  • Says my computer is no longer protected and that I need to update, but says that my computer is no longer compatable, what does this mean and how do I fix it?

    A warning pops up and says that Firefox is no longer protected, and that I need to upgrade. But then, I'm told that the upgrades are not compatible with my computer. What does this mean, and how to I get the updates?
    Thanks

    http://www.mozilla.org/en-US/firefox/8.0/system-requirements/
    Firefox 3.6.x is the last available from Mozilla for MacOSX 10.4. <br />
    http://www.mozilla.com/en-US/firefox/all-older.html

  • PROTECT ENDPROTECT doesen't work sapscript

    hello,
    i would like to use protect becuase i want that this element stays in one entire page, but he continue to broke the element.... why?
    i use protect and endprotect...it's correct?
    /E           ITEM_LINE
    /:           PROTECT
    /:           SET DATE MASK = 'DD/MM/YY'
    /*           IF &PAGE(C)& <> 1
    /*           &ULINE(112)&
    /*           ENDIF.
    T2           &VBDPA-POSNR(Z)&,,&VBDPA-MATNR(C)&,,&VBDPA-MEINS(Z)&
    =           ,,&VBDPA-KWMENG(C)&,,&VBEP-EDATU&,,&T_PRICES-PR_LORDO(C)&,,
    =           &T_PRICES-PR_SCONTO(C)&
    /*           PERFORM GET_PRICING IN PROGRAM ZRVADOR01_FRM.
    /*           USING &VBDKA-VBELN&
    /*           ENDPERFORM.
    T2           ,,&VBDPA-ARKTX&
    /*           ,,&'Numero articolo cliente 'VBDPA-IDNKD' '&&'Posizione 'VBDPA-POSEX&
    /*           ,,&'Partita 'VBDPA-CHARG&
    /:           ENDPROTECT

    Try this,
    I think there is a small error in your code.
    /E ITEM_LINE
    /: PROTECT
    /: SET DATE MASK = 'DD/MM/YY'
    /* IF &PAGE(C)& 1
    Instead try this
    /* IF &PAGE(C)& = 1
    /* &ULINE(112)&
    /* ENDIF.
    T2 &VBDPA-POSNR(Z)&,,&VBDPA-MATNR(C)&,,&VBDPA-MEINS(Z)&
    = ,,&VBDPA-KWMENG(C)&,,&VBEP-EDATU&,,&T_PRICES-PR_LORDO(C)&,,
    = &T_PRICES-PR_SCONTO(C)&
    /* PERFORM GET_PRICING IN PROGRAM ZRVADOR01_FRM.
    /* USING &VBDKA-VBELN&
    /* ENDPERFORM.
    T2 ,,&VBDPA-ARKTX&
    /* ,,&'Numero articolo cliente 'VBDPA-IDNKD' '&&'Posizione 'VBDPA-POSEX&
    /* ,,&'Partita 'VBDPA-CHARG&
    /: ENDPROTECT

  • I cannot seem to edit PDF files on Adobe Acrobat as it says the files are protected and I need to enter a Permissions Password?

    I cannot seem to edit PDF files on Adobe Acrobat as it says the files are protected and I need to enter a Permissions Password?

    If the files have a permissions password, you need to know it, and remove security, before you can edit the files. That is correct.

  • How do i personalize it and password protect it?

    My internet works, I was trying to set up my new airport extreme and my computer froze in the process and now it works but the light blinks amber and its an open network connection that anyone can connect to.  I tried a factory reset, but it won't go back to the easy setup process like the first time.  It just opens and my computer connects.  Any thoughts for how to rename the network and password protect it?

    To rename the Network Name: AirPort Utility > Select the AirPort Extreme Base Station (AEBS) > Manual Setup > AirPort > Wireless tab > Wireless Network Name
    To enable wireless security: AirPort Utility > Select the AEBS > Manual Setup > AirPort > Wireless tab > Wireless Security. I would recommend using "WPA2 Personal" for the security type.

  • Some of my songs from iTunes are AAC (m4a not protected) and some are AAC (m4p Protected).  Why is this???

    Some of my songs from iTunes are AAC (m4a not protected) and some are AAC (m4p Protected).  Why is this???
    Any insights would be much appreciated.

    Because you purchased some of the songs when they were sold as DRM ( protected ) - pre itunes plus, and you bought some of the songs when they were sold as non-drm - itunes plus.
    You can check quick links in the itunes store to see if you have itunes plus upgrades available for purchases.

Maybe you are looking for