PROTECT & BOTTOM issue

/E ITEM_CONDITIONS
/: PROTECT
/: BOTTOM
ZC &KOMVD-VTEXT&,,&KOMVD-KWERT&
ZC &KOMK-SUPOS&
/: ENDBOTTOM
/: ENDPROTECT
Is this correct?
Hi, all. May i know how to protect the text elements into a same block when displaying, besides make it alwaya in the bottom on the page ??
That's mean this element content will not be split into two part between two pages when there is insufficient space in the front page, and also it is always on the bottom.
Thanks in advance.

Thanks Bala Krishna.
But sometimes I meet a problem. When there are 2 pages of data, the text element ITEM_CONDITIONS content which is protected do not print out in the bottom in my second page. Although the space on the second page do not fit the whole proteced text element, it should be printed out on third page bottom, right ??
Do you have any idea ?
Thanks.

Similar Messages

Protected content issue with Sony Blu-Ray

Hi, I purchaed a Sony BDX-S500U to play Blu-Rays on my iMac - I'm running Windows 7 under Boot Camp.
However, once I try and play the movie, I get an error regarding protected content, advising me to use a different, non-digital connection to my monitor... obviously not an option.
I've tried the bundled Cyberlink software (version 9) and the trial of the Intervideo software and had the same issue. Both packages run fine up to the point where protected content tries to run.
I know this is possible - I've seen online reports of other blu-ray drives working under this configuration. But I'm wondering whether the Sony is particularly finicky about HDCP compliance, or whether there is some glitch with the ATI Radeon HD 4850 and its connection to the screen.
All drivers are up to date, and the system is an 2009 i7 running at 2.8Ghz.
Has anyone seen this issue before? Is there a workaround?
Thanks!

The bottom line here is that streaming video requires a huge amount of bandwidth and very few wireless networks will be able to deliver this type of performance. I'm afraid that it is going to have to be a wired Ethernet connection for reliable video and network performance on your network.
Not sure if you have DirectTV or not, but their new Whole Home setup is not even supported over wireless...you have to have Ethernet cables connecting the DVRs to your router. Same reason..wireless just won't deliver the goods for most folks when trying to stream video....especially high defintion video.

AirPrint and pdf password protected file issue

Hello
I'm facing issue while printing pdf password protected file via Airprint.
From my iPhone /iPad I can print without any issue to my HP dj 2540 almost everything except pdf password protected file.
The same pdf file (protected with password) can be printed without any issue form any PC/laptop.
Do anyone have any idea on how to solve this issue, please?
Thanks
regards
Michele

It seems that everyone asking this question have links from Grand Canyon University which will soon have over a 100,000 online students that all use ebooks that open just fine in Adobe Acrobat on their PCs BUT NOT on the mobile versions of Adobe Acrobat. Whatever allows this on PCs needs to be added to the mobile version soon. We rely on our etextbooks that can ONLY be opened on the PC version of Acrobat. That is ridiculous. I can't believe with all the posts regarding password protected ebooks on this forum....that it hasn't been resolved. No one can give you a link because the ebooks are on a website that needs a password. We can save the books to our harddrives/dropbox... I could send you a copy, but thats it. Surely someone at Adobe knows what the hell is going on and can test the problem out themselves?

Safari background-position: bottom; -issue

Hi,
I've noticed that Safari 8 on Yosemite is having some issues rendering background images if they've been positioned "background-position: bottom;" in CSS. It seems to render them a seemingly arbitrary 60 px below the viewports bottom. This causes some sites to look off, and it's an issue I haven't seen in any other browser.
Anyone else noticed this issue? Any workarounds until it gets fixed?
Thanks!

Just installed Safari 8.0.2 hoping it would resolve this issue...but no, still no fix...
Please submit bug reports to Apple if you have noticed this bug!

Help! PRS-300 protected page issues

Please help!
I have the PRS-300 and download library books, usually in the .epub format. Recently I made the mistake of putting both .epub and .pdf on my ereader, and I got the protected page. Usually I bypass this by re-trasnferring an .epub book. However, this time it didn't work. I have deleted all the books on my ereader, redownloaded some from the library, etc. And even with no .pdf books in my librar, no .epub books work anymore! I don't know to fix this. I usually work in ADE for this, have found that sometimes the Sony Library sorts it out, but now am just super frustrated.
Thanks.

I also am having the same issue. I found a Mobile Reader forum
http://www.mobileread.com/forums/showthread.php?t=68463 that talked a lot about it, but no real answers.
I don't know if it is ADE or Sony. I wonder if just using the Sony ELibrary rather than ADE would work? Or use a differnt device?

Password protected file issue

I downloaded a password protected file that requires Acrobat reader 10. iOS version cannot seem to open. Any suggestions? I'd like to be able to use the text highlight and note features in the iOS version.

It seems that everyone asking this question have links from Grand Canyon University which will soon have over a 100,000 online students that all use ebooks that open just fine in Adobe Acrobat on their PCs BUT NOT on the mobile versions of Adobe Acrobat. Whatever allows this on PCs needs to be added to the mobile version soon. We rely on our etextbooks that can ONLY be opened on the PC version of Acrobat. That is ridiculous. I can't believe with all the posts regarding password protected ebooks on this forum....that it hasn't been resolved. No one can give you a link because the ebooks are on a website that needs a password. We can save the books to our harddrives/dropbox... I could send you a copy, but thats it. Surely someone at Adobe knows what the hell is going on and can test the problem out themselves?

Forefront to Exchange Online Protection - Notification Issue

So I guess we converted awhile back to EOP, but I wasn't with the organization. The problem I have is, when I remove the sync tool off our server, I keep getting notifications that things arnt in sync etc. Clearly they are because we are using
the Azure tool now.
I found our group email below in the old system (forefront admin center) but I can't edit it or remove it. Any ideas on how to stop these emails!? Thank you!'

So I guess since I started this thread I will respond to it to help everyone else out. I hadn't gotten a response in a week so decided to take matters into my own hands.
We were migrated over to Exchange Online Protection like I'm assuming you others have. What I ended up doing was logging into the EOP portal and going to service requests or support or whatever on the left hand side. I put in a ticket to Microsoft.
They ended up escalating it to the FOPE team who then reached out to me via email and asked a few other questions to confirm what I was doing.
They ended up taking care of it for me and we havn't gotten any notifications since.
Hope this helps!! Let me know if you have further questions.

Protected - visibility issue????

Hi,
i have the following classes with the following methods:
public abstract class JRBaseFiller
public JasperPrint fill(Map parameterValues, Connection conn)
throws JRException
protected JasperPrint fill(Map parameterValues, JRDataSource ds)
throws JRException
fillReport();
protected abstract void fillReport() throws JRException;
public class JRVerticalFiller extends JRBaseFiller
protected synchronized void fillReport() throws JRException
public class JRVerticalFillerStreaming extends JRVerticalFiller
protected synchronized void fillReport() throws JRException
In my coding, i create a new instance of JRVerticalFillerStreaming as below :
Map parameter,Connection con
JRVerticalFillerStreaming filler = new JRVerticalFillerStreaming();
filler.fill(parameters, con);
And it works fine....
However, changing the Connection type to JRDataSource type
Map parameter, JRDataSource con
JRVerticalFillerStreaming filler = new JRVerticalFillerStreaming();
filler.fill(parameters, con);
results in:
Unhandled event loop exception
Reason:
Unresolved compilation problem:
     The method fill(Map, JRDataSource) from the type JRBaseFiller is not visible
I know that the method fill is of type protected but isn't protected means : Is available to all classes in the same package and also available to all subclasses of the class that owns the protected feature.This access is provided even to subclasses that reside in a different package from the class that owns the protected feature.
In my case, JRVerticalFillerStreaming is a sub sub class of JRBaseFiller.. why it is not visible then? or is it caused by other reasons?
Please advice..
cheers,
ctbozu

>
I know that the method fill is of type protected but
isn't protected means : Is available to all classes
in the same package and also available to all
subclasses of the class that owns the protected
feature.This access is provided even to subclasses
that reside in a different package from the class
that owns the protected feature.
In my case, JRVerticalFillerStreaming is a sub sub
class of JRBaseFiller.. why it is not visible then?
or is it caused by other reasons?
Please advice..
cheers,
ctbozuIt all depends on where you instantiate the objects. B4 we go into an example, pls keep the folln things in mind.
Imagine that you have classes A, B, and C are in three separate packages,
Let C be the class in which a protected member m is declared. Access is permitted only within the body of a subclass S of C.
package com.my;
public class BaseTest
    protected void show(){}
//and then we have in a diff pkg
package com.my.child;
import com.my.BaseTest;
public class ExtendTest extends BaseTest
    public static void main(String args[])
        ExtendTest t = new ExtendTest();
        t.show(); //this is ok since we r in the base class method and protected is visible
        BaseTest t1 = t;
        //t1.show(); not visible cannot do this
if the main method where we instantiate the objects is in a different Class i.e outside the base class,
package com.my.child;
import com.my.BaseTest;
public class Main
    public static void main(String args[])
        ExtendTest t = new ExtendTest();
        t.showMe();
        //t.show(); not visible outside ExtendTest, cannot do this
        BaseTest t1 = t;
        //t1.show(); not visible cannot do this
}The rule for protected method access is a little bit odd when you first hear it. Look at JLS 6.6.2.1 or go thru this resource http://java.sun.com/docs/books/jls/second_edition/html/names.doc.html#62587
tx,
ram.

PLE400, PLW400, and network printer WIFI Protected Setup issues

Hi
Okay, I have a Linksys EA4500 wireless router with the PLE400 and PLW400 wireless extenders installed in my house. I set the extenders up using the Cisco Powerline AV Utility by following the directions (Same keyword shared, PLW400 password entered in) and it increased the range of my router effectively. However, ever since I installed the PLE400 and PLW400 I can no longer get WIFI Protected Setup to work on any of my wireless printers. I have two Brother HL-2270DW wireless printers that stopped working when I installed the extenders and cannot be connected to the router since then using the WIFI Protected Setup. What the heck?
Solved!
Go to Solution.

I held down the reset buttons for 10 seconds on the PLE400 and the PLW400 then set them back up and still had the problem. Then I thought maybe there are firmware upgrades available. Lo and behold there are so I upgraded the firmware on the PLE400 and the PLW400. Now everything works just fine. >.<

Protected Music Issues

Hey guys, i just bought my ipod today and i'm trying to upload a cd i have to the ipod. its stabilo's happiness and disaster. it has copy protected stuff on it (which is fine) but when i try to convert it with itunes (its a wma file) it refuses to let me. i then do as it tells me to for protected music and it still wont convert it. any help? this is one of my favorite cds and i REALLY dont want to buy it online when i already have the real copy... thanks.

It is copy protected. Not much you can do.
Stabilo - Happiness and Disaster
Copy Control
Take it back and get a refund.
Write a letter to the artist (Stabilo) & the label (EMI Canada).

Protected Mode Issues

I want to open a PDF but Protected Mode won't let me. Until tonight, I've had no problems. Why do I have one now?

We don't know. We also don't know your operating system.
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].

Just bought macbook; protection plan issues

I just bought my new Macbook today, and I cannot seem to register my Applecare Protection Plan. I created an Apple ID, and did everything that it asked me to. I press the continue button. It takes me through about three/four urls before it gives me an error screen... Help me please.

Yeah, thanks! I figured that if I could get someone who could tell me if there was something that I was doing wrong, I could fix it now. :: shrug :: Oh well. Thanks anyways.

Issue with displaying summary in the Page Bottom

Hi Friends,
I have an issue with displaying summary in the page bottom. for this i am using command BOTTOM and ENDBOTTOM in Main Window.
I designed 2 pages are First and Next, in the first it displays PO Header details and Item details in the Main window and also Item details continuious in the Next Page also.
If the lines are enough in Bottom then it displays the summary. But if the lines are not enough in bottom then it does not trigger the new page, so that it doesn't displays the Summary in Bottom.
for ex: Total lines of the page 50 and Bottom required 15 lines. In the next page contains upto 35 lines, it triggers the Bottom.
But if the lines are more than 35 and below than 50, it does not trigger the new page so that it does not shows the bottom.
Please help me on the same, this is very urgent.I will give a rewatrd if it is helful.
Regards,
Subbarao

HI,
Try with printing the bottom data with Protect and ENDPROTECT along with your Bottom and endbottom.
Eg: Protect
bottom
text
endbottom
endprotect.
Regards,
Venkatesh

Use bottom and protect together

Hi all,
May I know the that possible to use BOTTOM and PROTECT together with few lines of text inbetween?
Eg:
BOTTOM
PROTECT
texttexttext
texttexttext
texttexttext
ENDPROTECT
ENDBOTTOM
or
PROTECT
BOTTOM
texttexttext
texttexttext
texttexttext
ENDBOTTOM
ENDPROTECT
Above code dont work for me. Please advice thank!!!

Hi Kek,
Refer this link,
[Bottom..Endbottom|http://help.sap.com/saphelp_nw70/helpdata/en/d6/0db4a9494511d182b70000e829fbfe/content.htm]
Regards,
Sravanthi

Work protect mode enabled - but giving javascript issue in IE8

Hi Experts,
We need help on work protect mode issue. we enabled the work protect mode.
When there is unsaved data and moving from existing page to other role, we are getting script error in IE 8 version. But for earlier versions(IE7) , it is working perfectly.
It looks like some issue in the browser or some patch needs to installed for resloving this issue.
can anyone help me in this regard. Thank you.
Thanks & Regards,
Raghavendranath G

Hi,
The alternative way is....you can open the page using the compaitbility view..(You should be able to see the compatibility option in the address bar) This will prompt you to reload the page.
Regards,
Narendra

PROTECT & BOTTOM issue

Similar Messages

Maybe you are looking for