Protect - endprotect in Smartform
hi
what is the similar statement for protect-endprotect in smartforms
please help me out.
regards
padma
HI
here are two options for protection against line break:
- You can protect a line type against page break.
- You can protect several table lines against page break for output in the main area.
Protection against page break for line types
- Double-click on your table node and choose the Table tab page.
- Switch to the detail view by choosing the Details pushbutton.
- Set the Protection against page break checkbox in the table for the relevant line type. Table lines that use this line type are output on one page.
Protection against page break for several table lines
- Expand the main area of your table node in the navigation tree.
- Insert a file node for the table lines to be protected in the main area.
- If you have already created table lines in the main area, you can put the lines that you want to protect again page break under the file using Drag&Drop. Otherwise, create the table lines as subnodes of the file.
- Choose the Output Options tab page of the file node and set the Page Protection option. All table lines that are in the file with the Page Protection option set are output on one page.
In 4.6, Alternatively in a paragraph format use the Page protection attribute to determine whether or not to display a paragraph completely on one page. Mark it if you want to avoid that a paragraph is split up by a page break. If on the current page (only in the main window) there is not enough space left for the paragraph, the entire paragraph appears on the next page.
Regards
PAVAN
Similar Messages
-
Usage of protect endprotect in smartforms
To control the Paragraph in a page we use protect endprotect in SAP SCRIPT. how to go about it in smartorms
Syntax:
/: PROTECT
/: ENDPROTECT
The lines to be protected lie between the two commands.
An ENDPROTECT command without a preceding PROTECT command is ineffective.
If the last ENDPROTECT is missing, it is implicitly assumed at the end of the text.
PROTECT .. ENDPROTECT commands cannot be nested. If a second PROTECT command is recognized while another is active, the second is ignored.
If the text between PROTECT and ENDPROTECT is so extensive that it would not fit on an empty page, then only one form feed is generated and the text is normally output. Thus, in this case, the section to be protected is separated by a page break. -
How to write Protect endprotect concept in Smartforms
hi
can any one suggest me
How to write Protect endprotect concept in Smartforms
i have some content to coem without break in SMARTFORM
how to do that
Thanks & Regards
kalyan
<thread moved, has nothing to do with ABAP Objects. Please choose your forums more carefully in future>
Edited by: Mike Pokraka on Sep 26, 2008 12:50 AMHi,
For 4.7 version if you are using tables, there are two options for protection against line break:
- You can protect a line type against page break.
- You can protect several table lines against page break for output in the main area.
Protection against page break for line types
- Double-click on your table node and choose the Table tab page.
- Switch to the detail view by choosing the Details pushbutton.
- Set the Protection against page break checkbox in the table for the relevant line type. Table lines that use this line type are output on one page.
Protection against page break for several table lines
- Expand the main area of your table node in the navigation tree.
- Insert a file node for the table lines to be protected in the main area.
- If you have already created table lines in the main area, you can put the lines that you want to protect again page break under the file using Drag&Drop. Otherwise, create the table lines as subnodes of the file.
- Choose the Output Options tab page of the file node and set the Page Protection option. All table lines that are in the file with the Page Protection option set are output on one page.
In 4.6, Alternatively in a paragraph format use the Page protection attribute to determine whether or not to display a paragraph completely on one page. Mark it if you want to avoid that a paragraph is split up by a page break. If on the current page (only in the main window) there is not enough space left for the paragraph, the entire paragraph appears on the next page.
Regards,
Himanshu Verma -
PROTECT-ENDPROTECT problem in SAP Script
In SAP Script MAIN Window I have 10 different elements to print differet stuff related with each delivery line item.
Like Material Number
Material Description
Long text [Has formatted text and I am reading that text and printed in some format some lines under material number and some under materail desc.]
and other information required by client.
Loop at Delivery item table.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'PROTECT'.
Print differnt elements.
Loop at lond text internal table.
print in proper format as I mentioned.
endloop.
CALL FUNCTION 'CONTROL_FORM'
EXPORTING
command = 'ENDPROTECT'.
ENDLOOP.
My problem is PROTECT ENDPROTECT is not working properly.
It is printing only 1 item with other info on first page as there are enough space left to print minimum three items with details.
on next page it is priting only 3-4 items as there are enough sapce to ptint at lease 10 items with details.
The only good thing is it is not spliting the Item details and other text.[Main window on next page has bigger size]
Any idea why PROTECT - ENDPOTECT not behaving properly.
Thanks
Aman
Message was edited by: Amandeep SinghHello,
Try to do like, Put PROTECT and ENDPROTECT in the SAPScript itself.
Like
Element 1
Protect
..matnr....
element 2
...desc....
element 3 (long text)
...text
....text
element 4
endprotect
call the element 4 in the loop statment, whenever required.
Hope it will work.
Regards,
Naimesh. -
Hoz exactly we use Protect-EndProtect command to avoide output text which should not spilt in two pages. Plz explain with example of Codes.
Thanks.Hi
It is used to protect the address or info to print in one page only
If the space in one page is not sufficient it will print in the second page
see the sample
/: PROTECT
/: ADDRESS PARAGRAPH AS
/: TITLE &LFA1-ANRED&
/: NAME &LFA1-NAME1&, &LFA1-NAME2&, &LFA1-NAME3&,
/: STREET &LFA1-STRAS&
/: POBOX &LFA1-PFACH& CODE &LFA1-PSTL2&
/: CITY &LFA1-ORT01&, &LFA1-ORT02&
/: POSTCODE &LFA1-PSTLZ&
/: COUNTRY &LFA1-LAND1&
/: REGION &LFA1-REGIO&
/: FROMCOUNTRY &T001-LAND1&
/: ENDADDRESS
/: ENDPROTECT
Reward points if useful
Regards
Anji -
PROTECT-ENDPROTECT IN SAP SCRIPT
HOW DO WE USE PROTECT-ENDPROTECT TO MAKE SURE THAT THE OUTPUT DISPLAYED IN A VARIABLE WINDOW IS EITHER COMPLETE OR NOT PRINTED AT ALL.
Check this Documentation,
I have this full document if you want i will mail you..
<b>PROTECT: Protect from page break</b>
You can determine that a paragraph must not be separated by a page break in the style or layout set. If the attribute page protection is set, then all the lines of this paragraph are always output together on one page. This attribute is linked to the respective paragraph.
It certainly does not make sense, to provide all the paragraphs with a page protection attribute to neutralize an unwanted page break. This event is much too dynamic for this and only results from the current text. Furthermore, it can also happen that you only want to protect parts of a paragraph from a page break. In principle, you could solve this problem using the command NEW-PAGE, by explicitly starting a new page before the affected parts of the text. However, this procedure is not very easy to make changes to. Assume that you have formatted your text using the NEW-PAGE command so that you have no unwanted
page breaks. If you now insert new lines or delete existing ones, you would have to check all the NEW-PAGE commands inserted after this point in the text, as changes can result in the movement of page breaks. With the command pair PROTECT. ENDPROTECT, SAPscript offers you the option of individually defining protection from a page break. If you parenthesize the text in question using these commands, SAPscript automatically guarantees that all the lines it contains are printed together on one page. If the lines fit on the current output page, they are output there, in exactly the same way as if the PROTECT
command was not used. If, however, the space is not sufficient, the PROTECT command then works as a NEW-PAGE and generates a form feed .For this reason, you can view PROTECT/ENDPROTECT as a conditional NEW-PAGE command, whose condition consists of whether the included lines fit into the current window MAIN or not. -
What is PROTECT ENDPROTECT in SAPscript?
Hi SDN,
What is the significance of Protect & End-protect in Sapscripts?
Regards,
Rahul.To allow you to define the areas to be protected against a page break on an individual basis, SAPscript provides the PROTECT.. ENDPROTECT command pair. If you enclose the text to be protected in these commands, then SAPscript will ensure that each line of this text is printed together on the same page. If the complete text fits in the space remaining on the current page, then it is printed on this page just as it would be if no PROTECT command had been used. If, however, the remaining space is not sufficient for the text, then the PROTECT command has the same effect as a NEW-PAGE command and text is printed on a new page.
Thus the PROTECT/ENDPROTECT commands may be regarded as a kind of conditional NEW-PAGE command, the condition being whether or not the lines enclosed between the two commands fit in the space remaining in the current main window.
Syntax:
/: PROTECT
/: ENDPROTECT
The text lines to be protected are enclosed between the two commands.
An ENDPROTECT command without a preceding PROTECT command has no effect.
If the terminating ENDPROTECT is missing, SAPscript assumes it at the end of the text.
PROTECT.. ENDPROTECT command pairs cannot be nested. If a second PROTECT command occurs before the first one has been terminated by an ENDPROTECT, it is ignored.
If the text enclosed by a PROTECT.. ENDPROTECT pair is itself too long for a single page, then a page break is generated immediately before the text and the text is printed in the normal way. It is then unavoidable that a page break will occur at some point within the text.
Hope dis helps
Reward all helpful answers -
Override Use of Protect-Endprotect Function when editing Standard Sapscript
Hi abapers,
I have made a copy of a standard form (F150_DUNN_01) and edited it according to the customers needs. One problem I have encountered is the use of seperate elements, As you can see in the standard form, the table is output as one element and the total appears afterwards in another element. As I am not editing the print control program I have added texts, etc. after the totals line but inside elements which I know are always output. I have recently noticed that some of the elements are protected using the 'CONTROL_FORM' function in the print control program.
This leads me to the problem, when I have between 10-15 records in the table the following elements (540 - 592) are printed on the following page. I have read about the protect-endprotect statements but in my case it would be between 2 elements.
I would like the totals line to appear along with the table and the rest can go on the next page. Is it possible to use this method without editing the print control prorgam to call elements without protection? Elements 581 - 592 are currently protected using the 'CONTROL_FORM' function in the print program.
Here is a snippet of the MAIN window with some PROTECT statements used but not working as expected.
/: PROTECT
/E 530
T3 <BU>INV.NUM</>,,<BU>DATE</>,,<BU>INV.Amount</>,,<BU>DUE DATE</>,,
= <BU>NOTE</>
T3
/E 531
/: DEFINE &TDLINE& = ''
/: PERFORM GET_TEXT IN PROGRAM ZFII_F150_ROUTINE
/: USING &T001-SPRAS&
/: USING &MHND-BELNR&
/: USING &MHND-BUKRS&
/: USING &MHND-GJAHR&
/: CHANGING &TDLINE&
/: ENDPERFORM
T3 &MHND-BELNR&,,&MHND-BLDAT&,,&MHND-WRSHB(C)&,,&MHND-FAEDT& ,,&TDLINE&
/E 540
/E 550
AS Inicio: &T040A-TEXT1&
/E 551
AS Fin: &T040A-TEXT1&
/E 570
T3 Gtos.reclam.,,&F150D-WAERF&,,&F150D-MHNGF(C)&
/E 581
T3 ,,,,&ULINE(15)&
T3 ,,&F150D-WAERF&,,&F150D-SUFPF(C)&
/E 582
T3 ,,&F150D-WAERF&,,&F150D-SUFPF(C)&
/: ENDPROTECT
/E 591
AS
/: CASE &MHNK-MAHNS&
/: WHEN '1'
/: INCLUDE ZFI_DUNN_MAIN5911 OBJECT TEXT ID ST LANGUAGE &T001-SPRAS&
/: WHEN '2'
/: INCLUDE ZFI_DUNN_MAIN5912 OBJECT TEXT ID ST LANGUAGE &T001-SPRAS&
/: WHEN '3'
/: INCLUDE ZFI_DUNN_MAIN5913 OBJECT TEXT ID ST LANGUAGE &T001-SPRAS&
/: ENDCASE
T6
/E 592
T6 ,,&F150D-WAERF&,,&F150D-SALFW(C)&
Regards,
Simon
Edited by: Simon Kerr on Oct 4, 2010 12:14 PMHi Vijay,
Thanks for reply but it isn't work.
I think there is no documentaion available in any languagein the SAP.
So If possible give me any other reference by which I can search documentation.
Or just check it at your end if available send it to me.
Please try once again.
I wnat documentation for function modules in the Function Group MBWL & J1IEXGM.
both are used for MIGO.
Thanks and Regards
Dhanu -
Example using command protect & endprotect
hii gem's
im unable to find the difference when using protect...endprotect
without tht bcoz im getting same output
ex:
/: protect
PH 'THIS IS TEST'
PH 'THIS IS TEST'
/: NEW-PAGE
PH 'THIS IS TEST'
ENDPROTECT
please give a example using command protect & endprotect
THANK U
REWARDS FOR GUD REPLY
REGARDS
JAIPALHi Jaipal,
It is mainly used to prevent the page break
menas whatever lines you wrote between these protect and endprotect they are always printed in a single page only and they won't split into two pages though there is no full space
go to SE71 see any scripts pagewindows
you will find a lot of examples
/E TOTAL_AMOUNT
/: PROTECT
UL &ULINE(71)&
TO
TO ,,Total net value excl. tax &EKKO-WAERS&,,
&KOMK- FKWRT&
/: IF &SUM-EURO-PRICE& NE ' 0,00'
/ ,, EURO,,&SUM-EURO-PRICE&
/: ENDIF
/: ENDPROTECT
Reward points for useful Answers
Regards
Anji -
Protect functionality in Smartform
Hi,
Do we have any command like Protect in smartform to keep the contents of a page together.
Also i have decalred an internal tabe in which some fields are coming from VBAK and other from VBAP, now when i am trying to declare it in Smartform interface i am getting an syntax error "table not defined in dictinory".
Thanks in advance.
GurjeetHi,
For Page Protection in smartforms, take a look at SAP Note 382366. Additionally, look at following posts on SAP Fans:
1. http://www.sapfans.com/forums/viewtopic.php?t=7100
2. http://www.sapfans.com/forums/viewtopic.php?t=10393
Hope this helps.
Regards -
PROTECT ENDPROTECT doesen't work sapscript
hello,
i would like to use protect becuase i want that this element stays in one entire page, but he continue to broke the element.... why?
i use protect and endprotect...it's correct?
/E ITEM_LINE
/: PROTECT
/: SET DATE MASK = 'DD/MM/YY'
/* IF &PAGE(C)& <> 1
/* &ULINE(112)&
/* ENDIF.
T2 &VBDPA-POSNR(Z)&,,&VBDPA-MATNR(C)&,,&VBDPA-MEINS(Z)&
= ,,&VBDPA-KWMENG(C)&,,&VBEP-EDATU&,,&T_PRICES-PR_LORDO(C)&,,
= &T_PRICES-PR_SCONTO(C)&
/* PERFORM GET_PRICING IN PROGRAM ZRVADOR01_FRM.
/* USING &VBDKA-VBELN&
/* ENDPERFORM.
T2 ,,&VBDPA-ARKTX&
/* ,,&'Numero articolo cliente 'VBDPA-IDNKD' '&&'Posizione 'VBDPA-POSEX&
/* ,,&'Partita 'VBDPA-CHARG&
/: ENDPROTECTTry this,
I think there is a small error in your code.
/E ITEM_LINE
/: PROTECT
/: SET DATE MASK = 'DD/MM/YY'
/* IF &PAGE(C)& 1
Instead try this
/* IF &PAGE(C)& = 1
/* &ULINE(112)&
/* ENDIF.
T2 &VBDPA-POSNR(Z)&,,&VBDPA-MATNR(C)&,,&VBDPA-MEINS(Z)&
= ,,&VBDPA-KWMENG(C)&,,&VBEP-EDATU&,,&T_PRICES-PR_LORDO(C)&,,
= &T_PRICES-PR_SCONTO(C)&
/* PERFORM GET_PRICING IN PROGRAM ZRVADOR01_FRM.
/* USING &VBDKA-VBELN&
/* ENDPERFORM.
T2 ,,&VBDPA-ARKTX&
/* ,,&'Numero articolo cliente 'VBDPA-IDNKD' '&&'Posizione 'VBDPA-POSEX&
/* ,,&'Partita 'VBDPA-CHARG&
/: ENDPROTECT -
Page protection in the smartform
Hi All,
I am working with an issue in smart forms.
Requirement: The main table header in the main window should be dispalyed from the second page if and only if there is no space for atleast single item level in the first page.
Solution that i tried for: I have created a folder under the header of main table and added all the table lines which were present in the header and checked the page protection tab.
The impact to the solution is that it is working but in the second page i am getting 2 headers
example :
header
lineitem1 value
lineitem2 value
header
Querry:I dont want to display the header which is at the bottom.Is that possible?If possible i would like to take help .
Thanks in advance,
Bhavani.Click on the 'Header' node of the table. Under the 'output option' tab, there are two check boxes 'At start of the table' and 'At page break'. check and uncheck them as you want to display the table header and check the output.
and there is no need of creating any folder under header node.
Hope it will help you
Edited by: Sujeet Karn on Oct 30, 2009 3:40 PM -
Protect -Endprotect functionality in reports
Hi ,
As per my user requirement like this.
final intarnal table having value like this.
EX:
field1 field2
1 1000
1 2000
2 1000
2 3000
3 10000
3 2000
3 5000
4 1000
4 2970
4 5000
5 4000
5 6000
In output first page it is displaying
1 1000
1 2000
2 1000
2 3000
3 10000
3 2000
3 5000
4 1000
and some footer data
in next page ( page 2 )
4 2970
4 5000
5 4000
5 6000
they need like all at one place like Protect functinality in script.
Please advise on this.
Regards
saliniHi Salini,
For this Increase the length of the page. See below.
Determining the Page Length
To determine the page length of an output list, use the LINE-COUNTaddition of the REPORT statement.
Syntax
REPORT rep LINE-COUNT length[(n)].
This statement determines the page length of the output list of program rep as length lines. If you specify the optional number n, the system reserves n lines of the page length for the page footer. Those lines of the page footer that are not filled at the END-OF-PAGE event, appear as blank lines (see Defining a Page Footer).
If you set length to zero, the system uses the standard page length (see The Standard List). To adapt the page length to the current window size, see Lists with Several Pages. While the list is created, the system field SY-LINCT contains the current number of lines per page (that is length, or 0 for the standard page length).
Consider that the length of the page header is part of length. Thus, for the list itself you can use only length minus page header length minus n lines. If length is less than the page header length, a runtime error occurs.
If during list processing the system reaches the end of the area provided for the actual list, it outputs the page footer, if any, inserts some space, and starts a new page. The space inserted belongs to the list background and is not a line of the list. The sy-pagno system field always contains the current page number.
Regards,
Md Ziauddin -
Hi,
in sapscript we have sentence PROTECT/ENDPROTECT,
what is the equivalent in smartforms?
How can i do likewise in smartforms?
Best regards.Hi
Yes you can use it in the table node:
In this node you can define several row with different structure and indicate if a certain row must to be protected.
Max
Message was edited by: max bianchi -
Smartforms : unable to protect page
In transaction Smartforms, in some cases, case protect is locked (when I'm in modification). Do you know why ?
Hi,
To use page protect in smart form use boxes. in smartform protect endprotect will not work instead of protect endprotect there is a option of boxes. in the box the protect check box always enable. the page or window you want to protect put into box.
Let me know if you have any confusion.
Thanks
Narendra Vikram Vishwakarma
Maybe you are looking for
-
Ad Hoc Formula Definition in BEx Web
Hello, I´m searching how to use the smart-input / AdHoc Formulas within the BEx Web (in BEx Analyzer it is not a problem). I found following statement: http://help.sap.com/saphelp_nw70/helpdata/en/a4/eb1442be645133e10000000a155106/frameset.htm Releas
-
im trying to update my software from 10.4.11 but its not letting me. what should i do?
-
Brand new Macbook pro using 169gb in "other" files
I had about 75 gb on my old computer (Macbook Pro 2006). I backed up onto an also brand new external hard drive. After making a new user account then deleting it and using migration assistant, 169gb is showing other files. I used it a few times but d
-
IWork 09 install from dmg not working
I installed iWork 09 from dmg, ran both the 9.1 and 9.2 updates. Doesn't work. When I try to open something, I get to the template chooser dialog box, then nothing opens when clicking either New Document (nothing happens) or an existing file (gives
-
Re: Even better use for RMB - use to show equivalent scriptcommand ..
Dirk, Can't help with the RC, but the fscript command to remove a partition from a node is UnassignAppComp node_name [component_name]. You need the component name if it isn't the "current" component. Don At 12:35 AM 11/21/97 +0000, Dirk Haben" (Tel +