Protect Production Systems from Local SLD installations

If we have several developers in our organization with Local Development Workstations (meaning they installed a local copy of WAS 6.40, MaxDb, Portal) how do we prevent those developers from setting up there local SLD to connect to Production Systems. If they set up a production system in the local SLD they will be able to configure their "adaptive rfc webdynpros" to connect to the production system with the jco connections in the Webdynpro Content Administrator. Is the only control point their id they would enter when configuring the jco connection?

YOu need the authorization for login in SLD as admin
Follow this link for compete details:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Are there any impacts/differences between exporting/importing and creating the systems manually? For example if I cannot export the systems would it be ok if I created them again in the production SLD?
No differeence...it's just increase the work you have to do in SLD...but the important thing here is when you move the tranports of the SLD BS from DEV to Production you have to maintin the same name as you have maintained in the trnsport targets in the DEV......your ID tranport to Production is dependedn on what is the BS name you are mentinog of production in the transports targets.

Similar Messages

SAP XI 3.0 - Error while reading the ID of own business system from the SLD

Error while reading the ID of own business system from the SLD for system Quality (QOC) and Client 100.
I get this error in the SXMN_MONI. The business process is that the Interface to send master schedule and finished inventory from the legacy system to SAP to create planned orders in SAP for all Plants.
I could able to get "SUCCESSFULLY PROCESSED" in development and production. But only in Quality I getting this error. Could anyone help me to fix this issue.
thanks...

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

How to remove Production System from Solution manager.

Hi All,
We have Three system landscape and solution manager installed.
All the system are managed by Solution manager.
here we are looking to remove the Production System from Solution manager.
as in case if is there any problem in solution manager then we are not dependent on it.
things will work directly on Production system.
Could you please let us know the procedure to remove the system from solution manager.
Please let us know if is there any document provided by SAP.

Hi,
Have you implemented charm,ccms monitoring or any other functionalities?
if yes,.Delete the sytem from tms domain. and TR route needs to be adjusted, if you are using ccms, remove the agent details from RZ21 also.
Does your production system data coming from SLD?
if yes, Delete the entry from SLD
if both the answer is no.
1.delete RFC from SOLMAN to the production systems.
2. delete the production system using SMT2 transaction.
3. Remove system rom SMSY from SOLMAN.
Thanks,
Jansi

Error while reading the ID of own business system from the SLD for system

Hello,
I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>ZTA</SAP:P1>
<SAP:P2>013</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody help me?

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Error while reading ID of own business system from the SLD

HI guys when trying to send Idoc from my R/3 system to SUS i am getting the following error in XI
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>DSM</SAP:P1>
<SAP:P2>900</SAP:P2>
<SAP:Stack>Error while reading ID of own business system from the SLD for system DSM and client 900</SAP:Stack>
I checked in sxmb_adm on both the ends on Xi as well as on my SUS server in Xi the role is the Integration server and on the SUS it is Application server also checked SLDAPICUST which is configured rite. Plz help me to come out of the problem.
Regards,
Anand

Hi Anand,
check the two thing's in XI.
1. First created technical system in XI to identify your XI server (Web as ABAP and Web AS Java)
2. Create the business system based on above technical system and select the role of business system is Integration server.
URL : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
3. Create the technical system based on your SAP R/3 system.
4. Create the business system based on your SAP R/3 system.
here you need to select role of business system : Application system.
related integration server is : <XI System SID has to come>
and try to refresh the initical cache once ...
http://<hostname>:<j2ee stack port>/CPACache/refresh?mode=full
after all the things post what is the problem you are faceing.
Regards,
Venu.

Error while reading ID of own business system from the SLD for system D18

Dear guru's,
I have almost completed a file2proxy scenario but I'm stuk on the following.
When sending a message the outbound adapter says:
<b>Error while reading ID of own business system from the SLD for system D18 and client 200</b>
What's the problem? I'm using a HTTP connection in the comm. channel. In this http connection a user with SAP_ALL is defined.
Any suggestions?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>D18</SAP:P1>
<SAP:P2>200</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading ID of own business system from the SLD for system D18 and client 200</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Login to system D18 and client 200 and check the TC SLDCHECK and also as per my pervious message check the entries in the SLDAPICUST, it should point to the Server on which SLD is present usually XI server https.
Actually what happens in this error is when you are done with the configuration part in the ID, you are trying to eceute the scenario File to proxy, when it comes to identify the receiver system which is D18 clnt 200, it goes to SLD to check it and SLD is trying to ping to the machine D18 this connection is set from the TC SLDAPICUST on the machine D18.
here the problem is that either the D18 is not able to ping to the SLD and also try refreshing the SLD cache.
Hope you problem is fixed

Error while reading ID of own business system from the SLD for system DPI

Hi All,
My sceanrio is Proxy to JDBC. and its B2B. am sending the data from BI system and based on the country field from the source, table is decided and value is updated in the table.
In RWB->Component Monitoring->Adapter Engine->Test Message, I have given the Sender component,Receiver Party,Receiver component,Interface,Interface Namespace,userid and password,Quality of Service and pasted the payload.
Now I am getting the error :Error While Sending Message: Error stack from response: Error while reading ID of own business system from the SLD for system DPI and client 001 Internal error in Landscape Directory
Please help me out.
Thanks
Kiruthi
Edited by: kiruthiga balusamy on Nov 24, 2009 4:02 PM

Hi,
Check transaction SLDAPICUST for correct SLD configuration.
http://help.sap.com/saphelp_nw70/helpdata/EN/0b/8512417301ee6fe10000000a1550b0/content.htm
~Sanv...

Error when reading the ID of the business system from the SLD

Hi,
I am working on a scenario JDBC - XI - BW (ABAP Proxies). I configured all the steps required to connect XI & BW systems. The SLDCHECK transaction is all green. I was able to connect to SLD from BW using SXMB_IFR tcode too. I was able to look at all the XI Repository interfaces from SPROXY tcode in BW. Created a new ABAP proxy (class interface and method) for the message interface in XI from BW (SPROXY Tcode). Created all required config in XI Directory. Got the message from JDBC adapter, mapping done successfully, and the message failed in the CALL Adapter Step.
The error is "Error when reading the ID of the business system from the SLD for system BWS and client 100."
What could have gone wrong. Thanks in advance.
Srini

Hi,
:::::::One Should Have the Following Roles AS A XI Developer With Out Admin Rights ::::::
1) SAP_XI_Developer_ABAP +
2) SAP_XI_Developer_J2EE +
3) SAP_XI_MONITOR_ABAP +
4) SAP_XI_MONITOR_J2EE +
5) SAP_SLD_ADMINISTRATOR +
6) SAP_XI_BPE_MONITOR_ABAP +
7) SAP_XI_DEMOAPP
8) SAP_XI_DISPLAY_USER_ABAP +
9) SAP_XI_DISPLAY_USER_J2EE +
Regards
Sesh

SLD Error in IE:Error while reading ID of own business system from the SLD

Dear Champs,
Scenario : JDBC to Proxy(APO system)
We are getting below error in MONI UAT Box. All other interface are working fine but we are facing issue for a particular Bussiness System also logical system are maintained properly.the same interface is working fine in other UAT box.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>R/3 Sys ID</SAP:P1>
<SAP:P2>"Client"</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading ID of own business system from the SLD for system "R/3 Sys ID"and client "Clnt no"</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
Regards,
Manikandan

Hi Mani,
Solution 1:
Check if the techncal system has associated Business system. I think there is something wrong in your SLD configuration and try to correct it.
Solution 2:
Create a Business system in the ID, and create the communication channel do the respective changes in ID ( I.e Receiver agreement, Receiver determination & Interface).

Error while reading ID of own business system from the SLD for system

Dear all,
We running on a SAP PI 7.1 enhancement pack 1.I know that there some threads about this subject, but unfortunately all suggestions found so far didn't solve my problem:
- SLDCHECK reports no errors
- SLAPICUST: pointing to the SLD
- SXI_CACHE with full refresh: no result.
Does anyone have a clue for me?
Kind regards,
John.

I hope you are facing this prolem with one particular Business System.. Since you have checked all the points and still facing this issue then try below options..
1. First try to clear full SLD cache and then test.
2. If cache doesn't solve the issue then delete the Business System from SLD and Integration Directory first then re-create the BS in SLD and "Clear SLD Data Cache" from "Environment" menu in Integration Directory and then import the Business System and test your scenario.

Identify SAP Production Systems (from Business suite systems)

Hello,
We have these systems.
DEV, QAS, TRN, CMS and PRD
I received a message from SAP mentioning;
According to our records, you currently have 5 SAP Business Suite systems. 2 of these are production systems
pl, help me to identify what are the SAP Business Suite systems they are talking about.
Is it DEV,QAS,TRN,CMS and PRD ?
what are the 2 production systems? Since we have only 1 PRD
(Is CMS also treated as a production system )
Kindly guide me to clarify the above message
regards,
Zerandib

Hi,
Sunny Pahuja's reply maybe helpful to you for understand. Also you can check the details for your system in SAP service marketplace..
https://websmp107.sap-ag.de/support
Check the system ID and name there tn the field of " Your Recently Used Systems "
Regards

Exporting technical/business systems from one SLD to another

Hi Experts,
Currently we have dev/qa SLD and production SLD. I currently have access to create/modify technical and business systems in dev/qa SLD but when I try to export these technical/business systems the link to export is disabled. Is there a different security role that I need in order to be able to export the techincal and business systems that have been created in the dev/qa SLD? I need to export these systems and import them into the production SLD.
Are there any impacts/differences between exporting/importing and creating the systems manually? For example if I cannot export the systems would it be ok if I created them again in the production SLD?
Thank you

YOu need the authorization for login in SLD as admin
Follow this link for compete details:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
Are there any impacts/differences between exporting/importing and creating the systems manually? For example if I cannot export the systems would it be ok if I created them again in the production SLD?
No differeence...it's just increase the work you have to do in SLD...but the important thing here is when you move the tranports of the SLD BS from DEV to Production you have to maintin the same name as you have maintained in the trnsport targets in the DEV......your ID tranport to Production is dependedn on what is the BS name you are mentinog of production in the transports targets.

Protecting my system from sudden power outages. How?

So here's my problem - I've recently installed Arch on an old laptop, and the battery no longer works. So, I'm stuck with using the AC power cord if I ever want to use it. That wouldn't be a problem, except that the power cord is very loose, and, unless I'm careful, is prone to falling out at the slightest provocation. Is there any way that I can harden my system so that it is less susceptible to data loss from such a situation? It's happened twice so far, and each time my filesystems have been able to recover, but I'd rather not take the chance.
Thanks in advance!

suilenroc wrote:I'm currently using Ext2 on my root filesystem. For some reason, Ext4 would refuse to complete the installation. How much of a performance difference is there between the EXT3/4 filesystems and reiserFS?
ext2 isn't a good option really since it's not journaled. Convert it to ext3 as recommended by pseudonomous.
Regarding performance ext4 is a bit faster than ext3, can handle larger disks and deeper folder structure. You can convert ext2 directly to ext4 if you want
tune2fs –O dir_index,uninit_bg,has_journal /dev/<partition>
e2fsck –pf /dev/<partition>
should do the trick.
ReiserFS is not faster all round but if you handle a lot of small files the performace is awesome. I don't think it's as failsafe though so ext4 would probably be a better choice.

How to get data in the remote system from local system.

Hi everybody,
I have developed four classes.
FileInterface.java:-
import java.rmi.Remote;
import java.rmi.RemoteException;
public interface FileInterface extends Remote {
public byte[] downloadFile(String fileName) throws
RemoteException;
FileServer.java:-
import java.io.*;
import java.rmi.*;
public class FileServer {
public static void main(String argv[]) {
if(System.getSecurityManager() == null) {
System.setSecurityManager(new RMISecurityManager());
try {
FileInterface fi = new FileImpl("FileServer");
Naming.rebind("//10.161.15.219/FileServer", fi);
} catch(Exception e) {
System.out.println("FileServer: "+e.getMessage());
e.printStackTrace();
FileImpl.java:-
import java.io.*;
import java.rmi.*;
import java.rmi.server.UnicastRemoteObject;
public class FileImpl extends UnicastRemoteObject
implements FileInterface {
private String name;
public FileImpl(String s) throws RemoteException{
super();
name = s;
public byte[] downloadFile(String fileName){
try {
File file = new File(fileName);
byte buffer[] = new byte[(int)file.length()];
BufferedInputStream input = new
BufferedInputStream(new FileInputStream(fileName));
input.read(buffer,0,buffer.length);
input.close();
return(buffer);
} catch(Exception e){
System.out.println("FileImpl: "+e.getMessage());
e.printStackTrace();
return(null);
FileClient.java:-
import java.io.*;
import java.rmi.*;
public class FileClient{
public static void main(String argv[]) {
if(argv.length != 2) {
System.out.println("Usage: java FileClient fileName machineName");
System.exit(0);
try {
String name = "//" + argv[1] + "/FileServer";
FileInterface fi = (FileInterface) Naming.lookup(name);
byte[] filedata = fi.downloadFile(argv[0]);
File file = new File(argv[0]);
BufferedOutputStream output = new
BufferedOutputStream(new FileOutputStream(file.getName()));
output.write(filedata,0,filedata.length);
output.flush();
output.close();
} catch(Exception e) {
System.err.println("FileServer exception: "+ e.getMessage());
e.printStackTrace();
After that when i compile classes when i give the command as
rmic FileImpl
in command prompt error is coming like this.
error: Class FileImpl not found.
*1 error*
Can anyone help me please,urgent.

It is generating stub and skeleton classes but when iam running FileClient after starting rmiregistry,it is coming something like
FileServer exception: FileServer
java.rmi.NotBoundException: FileServer
     at sun.rmi.registry.RegistryImpl.lookup(RegistryImpl.java:106)
     at sun.rmi.registry.RegistryImpl_Skel.dispatch(Unknown Source)
     at sun.rmi.server.UnicastServerRef.oldDispatch(UnicastServerRef.java:375)
     at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:240)
     at sun.rmi.transport.Transport$1.run(Transport.java:153)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
     at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
     at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
     at java.lang.Thread.run(Thread.java:595)
     at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:247)
     at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:223)
     at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:343)
     at sun.rmi.registry.RegistryImpl_Stub.lookup(Unknown Source)
     at java.rmi.Naming.lookup(Naming.java:84)
     at FileClient.main(FileClient.java:9)
Can u help me

How to hide detailed exception report on production system from end user

Dear all,
We have developed a Web Dynpro Java application for our client.
Now the client would like to make sure that on their production portal (NetWeaver Portal 7.0), if an end user comes across an application exception (or any other exception for that matter), a custom error message or at least a less detailed error message as the standard "500 internal server error" with all exception details is displayed.
I remember that once upon a time, i stumbled across a setting for this - but I just cannot find it anymore...
Does anyone here know this?
Any help much appreciated!
Thanks and best regards
Patrick

Hello,
For custom error pages you can check [this link|https://cw.sdn.sap.com/cw/community/docupedia/nw70java/blog/2010/03/21/custom-error-messages-in-the-portal]
For less detailed error messages, follow [Note 962319.|https://service.sap.com/sap/support/notes/962319]
Regards,
Laszlo

Protect Production Systems from Local SLD installations

Similar Messages

Maybe you are looking for