Protecting Folders with a Password
Is it possible to protect a folder with a password?
I want to create a sensitive document in OmniOutline. This program does not offer password protection for the files it creates. So I would like to make the folder the file will be in password protected. I don't want to go through the trouble of creating a new user account on the computer, just for this one file.
Hello! There are two ways. One is with SECREFOLDER. The safest way to securely encrypt data is to use an encrypted disk image. The directions are HERE. Tom
Similar Messages
-
Seperate folders with individual passwords on Time Capsule
I'm trying to have my entire office use the server, but with each department working off of their own folder and each folder having it's own password. I've tried to create an account for each department, but that's as far as I could get.
Semi-related question - Is there a way I can hook a HP network printer (4250) into one of the network ports on the time capsule? I want to use the usb port for another device.
I'm no good at networking stuff and I've been racking my brain for days on this one.
Message was edited by: jaroberts24It can be done, but you are "saving" the cost of an inexpensive external drive by accepting the cost of a convoluted administrative set-up. IME, for one person or any organization small enough to _not_ have a dedicated IT person/staff, that is a false economy. Typically, one of the admin tasks won't get done or won't get done right (you might need more space for back-ups on your Time Capsule, or you might forget exactly how you set up the TC drive to hold your Originals and put off moving more to it).
Drives are inexpensive, and bargains. For rarely loaded referenced Originals you don't _need_ anything faster than USB 2 (FW400 or any faster connection rec'd). Additionally, if you have room on your Time Capsule for your referenced Originals, then you have room for their backup. Put the referenced Originals on a new external drive, and back it up to Time Capsule.
And then you don't have to worry about pulling your Originals through a network. They will be locally mounted.
My 2¢.
--Kirby. -
Password Protect Folder with Pics in Photoshop CS4
I want to password protect a folder I have JPEGS in so any one else who may access my computer cannot get into that folder and view what is inside. How do I do it?
When I go to my file tab, brows in bridge, it says the Adobe Bridge service is no longer available.
And you cannot password protect individual files as states from the other answers below. it said you cant do it in Windows
Can I protect files or folders with a password?
No, you can't use a password to protect files and folders in Windows. However, some programs that run on Windows do allow you to protect individual files by using a password. For more information, check the Help for the program you are using.
There are other ways to protect your files and folders in Windows. You can encrypt your files, manually specify who can access the folders or files, or hide them. Choose your method based on how secure the folders or files need to be. Encrypting is the most secure, while hiding the folders is the least secure.
Note
The ability to encrypt files and folders is not available in Windows Vista Starter, Windows Vista Home Basic, and Windows Vista Home Premium.
See also
What are permissions?
What is Encrypting File System (EFS)? -
I am having the worst trouble with two things. I am very aware how to get the server to show up via SMB, but every time I log off the Macbook, the server's disappear. OK, so I went into "System Preferences" and hit "Users and Accounts" and added the server as a log in item. Worked well, except how do I stop that password prompt from coming up? I am using a Guest account with no password but I continue to get the password prompt. There is nowhere to hit remember password or anything. I have the option to remember the password in the keychain but I have no way of preventing the pop up.
Another issue I'm having is I have a Canon Pixma MP620 printer connected to my PC through USB. Three other PC's can connect wirelessly to print through the home network. My Mac does not find the printer, and when I manually add it, it recognizes it but WILL NOT print. It comes up with error messages like Authentican Required and connection issues between printers.
I have no password protection on my PC and have enabled sharing of all devices and folders through the Homegroup on the PC. I just can't figure it out. I am new to Mac and would love to get these two things figured out.
Thanks in advance for reading!Hi Bengt, Thanks for your input, much appreciated.
I have a WD 1TIG hard drive and are using usb connection, is it possible to use fire wire with these? I have had trouble with a lot of the videos I Imported, once they downloaded the file in the viewer window showed up blank and when I mouse over them it places a picture of another file in the window and wont drag and drop into the movie window, like their corrupted or something? Had to delete just about all of them and start again. Also is it possible to select a bunch of videos in the viewer window as to change the dates to the correct dates? All I have been able to do is "select all" which is no help. -
Backing up password protected folders
I want to use the instructions in this link to create an encrypted disc image on an external hard drive so that one folder with important files is password protected. I've never done this before.
Two questions:
1) Is there a more current or better way to create a password protected folder than these instructions? Or is this the latest and best way to do it? (It seems like I read somewhere there is a way to password protect folders without creating a disc image, but I can't remember for sure.)
2) I use Carbon Copy Cloner to backup my external hard drive to a second external hard drive. It don't have it set up to create bootable mirror copies of the drive, rather it goes file by file and simply copies whatever new files and folders were recently added. Is there any reason to believe that the encryption and password protection on the one password-protected folder won't transfer over perfectly to the second drive? Obviously, the copy of the password protected folder needs to work as perfectly and easily as the original.Dave,
When a disk image is copied (or otherwise backed up), the copy will contain the same files as the original (at the time the copy was made, of course). Also, the password for the copy will be the same as the original.
Your files should be safe
Scott -
may be in the office with a password, and give the other free for the rest of the users without password, the master password didn't help here I mean, or the handling for this is not clear to see for me
There is no full or partial password protection that is really more than an inconvenience.
You could however use the operating system permissions, but again whole application would be the result.
I have heard of updates occasionally reverting to English, an install will set it back. http://www.mozilla.org/en-US/thunderbird/all.html as data and program are separate reinstalling will not be an issue. -
how can i protect a folder or application in iPad with a password so everytime i want to open it it requires my password?
No way to do so at this time.
-
How to ZIP a PDF File with a Password Protection
Hi,
i've a pdf file with created smartforms and i want to assign a password to that pdf file but the SAP doesn't let doing that protection. So i want to create a zip file with a password protection for PDF file.
How can i create a zip file with a password protection? Can somebody help me please?
Thanks.Hello,
Check this links
Take a look to the class CL_ABAP_GZIP
open (top-)zip-archive
CALL METHOD lo_zip->load
EXPORTING
zip = lv_zip_file_head
EXCEPTIONS
zip_parse_error = 1
OTHERS = 2.
create sub-zip-archives which contain the files you would assign to a folder
add sub-zip-archive to top-zip-archive
CALL METHOD lo_zip->add
EXPORTING
name = lv_zip_filename
content = lv_zip_file.
save zip-archive
CALL METHOD lo_zip->save
RECEIVING
zip = ev_zip_file.
ABAP Development
How to ZIP a PDF file email attachment
Re: How to ZIP a PDF file email attachment -
Is There a way I can make a free password protected website with iWeb?
Hi!
I've been thinking to myself, "I want to make a free website". But I want it passcode protected and free. I am a mac kind of person so is there a way I can make a free passcode protected website with iWeb? I knwo you use to be able to do it with MobileMe, but that's outdated now so could someone please help!No, you cannot password protect a website with iWeb.
And no, you don't have to be a Mac kind of person either.
So how do they do it?
http://www.thesitewizard.com/apache/password-protect-directory.shtml
More if you search for it :
https://www.google.com/search?q=password+protect+website -
How to protect against a pdf printing without protecting the file with a password ?
I want to know if it's possible to protect a PDF against printing without protecting the file with a password ?
It's possible to make it with Acrobat Reader or another version ?
Thank You
Best regards.Hi,
Yes, you can restrict editing and printing of the document; although you have setup a permission password (To restrict the users from changing the document permissions).
Please follow the steps mentioned below:-
Open the file in Adobe Acrobat- Document properties- Security- Change security method to password security- Select Restrict editing and printing of the document
Regards,
Nakul -
we have developed packages to do the followings
Extract data from DB2 Source and put it in MS Sql Server 2008 database (Lets Say DatabaseA).From MS Sql Server 2008 (DatabaseA)
we will process the data and place it in another database MS Sql Server 2008 (DatabaseB)
We have created packages in BIDS..We created datasource connection in Datasource folder in BIDS..Which has DB2 Connection and both Ms Sql Server connection (Windows authentication-Let
say its pointing to the server -ServerA which has DatabaseA and DatabaseB).The datasource connections will be used in packages during development.
For deployment we have created Package Configuration which will have both DB2 Connection and MS SqlServer connection in the config
We deployed the packages in different MS SqlServer by changing the connectionstring in the config for DB2 and MS SqlServer...
While runing the package we are getting the following error message
Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for
use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
ilikemicrosoftHi Surendiran,
This is because the package has been created by somebody else and the package is being deployed under sombody else's account. e.g. If you are the creator then the package is encryption set according to your account and the package setup in SQL server is
under a different user account.
This happens because the package protection level is set to EncryptSensitiveWithUserKey which encrypts
sensitive information using creator's account name.
As a solution:
Either you have to set up the package in SQL server under your account (which some infrastructures do not allow).
OR
Set the package property Protection Level to "DontSaveSensitive" and add a configuration file
to the package and set the initial values for all the variables and all the connection manager in that configuration file (which might be tedious of-course).
OR
The third options (which I like do) is to open the package file and delete the password encryption entries from the package. Do note that this is not supported by designer and every time you make changes to the connection managers these encryption entries come
back.
Hope this helps.
Please mark the post as answered if it answers your question -
Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B
Hi,
I have developed several SSIS packages with the last Beta of VS2005 / SQL Server CTP. After the public release I tried to uninstall the CTP-Versions to install the msdn finals but this time I got lost and was not able to satisfy the requirements of the final setup of VS2005. So I decided to install the whole pc again and after some hours I had a clean machine (XP with latest SQL Server 2005 Standard and VS2005 Professional). Now I have tried to open my SSIS-Project but getting the following error: Error loading ImpNetqNewsRss.dtsx: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Schlüssel ist im angegebenen Status nicht gültig.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available.
After some “googleing” I found this thread: http://forums.microsoft.com/msdn/showpost.aspx?postid=22739&siteid=1 If I’m right the solution should be to use a Package Password, but I can’t figure out where I have to go enter/change a password. I even can’t remember I that ever used a password on my old installation for a dtsx-package?? Any help is welcome… Regards, DirkLet's Say your package name is MyPackage
In Visual Studio Go to Control Flow Tab.
Righ Click on an empty area inside the window not clicking "Data Flow Component" . pop up menu click the the properties to get to the properties window of MyPackage package.
Under the Security Area -> You will see
ProtectionLevel -- Change that to EncryptSensitiveWithPassword
PackagePassword -- enter password-> temp
This should do the trick however to be sure:
Below you will connection managers:
Database Connections (if more than one preform on all)
Double Click your connection to get the property pages. Click "ALL" under the Connection Link on Left Side. Scroll Down to Security Area.
Provide the followings:
Password (for the sql userid being used)
Persist Security Info = True
Save the Package and connect to SQL Integration Srvices in SQL Manager (To Server e.g; DBServer (Integration Services)
Stored Packages -> MSDB --> Right Click --> choose Import Package
in the property dialog box
Package Location : File System
Package Path -- Choose the location of your dtsx file. (MyPackage.dtsx)
Leave everything default.
Click OK.
Dialog box will appear asking for the Package Password
Provide the password-> temp
You have successfully imported the package called MyPackage.
In order to create a job.
In the job Step->
Type: SQL Server Integration Services Package
In the General Tab:
Package Source : SSIS Package Store
Server : DBServer (Where we stored our package above)
Click the button for the package: Choose your package (MyPackage)
Click OK :
It will ask the package password again : temp
Package has successfully been loaded to Job Step. Now you can schedule and do a test run on the job.
Thanks for the patience of reading for those who are expert.
- Azhar -
C# Protect file with password
Hello,
I am creating a notepad where you can protect a file with an password. Try to imagine it as a protected .zip file with username and password, but in this case it's about an text file with a other file extension (.cpd). I tried a lot of codes, but they don't
work. So the question to you guys is: How do i protect a text file (or .cpd file) with C#?
I created the form with the username textBox and the password textBox (+ the login button)
I have experience with C#, but i stay an beginner
Thanks,
Hugo Woesthuishow do i make the text file in an other coding, so no one can read the text in Notepad, Word , etc
Hi,
Here is an example:
private void button_Click(object sender, EventArgs e)
//Filename
string _filename = @"C:\test\testfile.txt";
//Write data to file
FileIO.WriteEncryptedFile(_filename, "HELLO");
//Read data from file
System.Console.WriteLine("File content: " + FileIO.ReadEncryptedfile(_filename));
File input / output class:
public class FileIO
public static void WriteEncryptedFile(string filename, string data)
using (StreamWriter _streamWriter = new StreamWriter(filename, true))
_streamWriter.Write(new Crypto().Encrypt(data));
public static string ReadEncryptedfile(string filename)
using (StreamReader _streamReader = new StreamReader(filename))
return new Crypto().Decrypt(_streamReader.ReadToEnd());
Encryption / decryption class:
class Crypto
byte[] _key { get; set; }
byte[] _iv { get; set; }
public Crypto()
_key = Encoding.Default.GetBytes("ABCDEFGHIJKLMNOP");
_iv = Encoding.Default.GetBytes("ABCDEFGHIJKLMNOP");
public string Encrypt(string data)
using(ICryptoTransform _iCrypto = new TripleDESCryptoServiceProvider().CreateEncryptor(_key, _iv))
var _byteData = Encoding.Default.GetBytes(data);
var _encryptedData = _iCrypto.TransformFinalBlock(_byteData, 0, _byteData.Length);
return Convert.ToBase64String(_encryptedData, 0, _encryptedData.Length);
public string Decrypt(string data)
using (ICryptoTransform _iCrypto = new TripleDESCryptoServiceProvider().CreateDecryptor(_key, _iv))
var _byteData = Convert.FromBase64String(data);
var _decryptedData = _iCrypto.TransformFinalBlock(_byteData, 0, _byteData.Length);
return Encoding.Default.GetString(_decryptedData);
Remember to change the key and IV in the constructor of the Crypto class, key must be between 16-24 characters long. -
Protect PDF files with a password
Hi everyone,
Do you know if there's a way to protect PDF documents with a password? I don't mean those apps (e.g. Google Reader) that let you password-protect your files just while you're using/viewing them on the iPad, I'd like an app that if you want (let's say) send your protected PDF via mail, it's still protected!I finally managed to find the application I was looking for: it's called Foxit PDF nad it's free to download on the App Store!
-
Protecting a webpage with a Password
I need to protect a page on our website with a password.
I realise this can only be done server-side and our website
is written in
Dreamweaver using HTML code.
I thought I had solved the problem when I found a really
good, free php
script (I don't know anything about PHP) but if I understand
the
instructions the whole website would have to be written in
php for it to
work, so it's no good.
The company who host our website do not offer any of their
own scripts for
such a purpose but have no objection to us uploading a script
of our own.
Can anyone give me advice or refer me to a website that will
help me achieve
a password protected web page?
Your help will be appreciated.
NoelThanks very much John,
I called RM and it seems likely that they will be able to
create a password
protected directory on their server.
Noel
"John Waller" <[email protected]>
wrote in message
news:ek3mjs$604$[email protected]..
>A quick and dirty solution (depending on how secure you
want things to be):
>
> Ask your host to set up a password protected directory
on their server for
> you. Should take them a couple of minutes.
>
> Then upload the page you want to protect into the
password protected
> directory on the remote server. No special scripting is
needed on the page
> itself since it's the directory that is password
protected.
>
> When you navigate to the page online, a dialogue box
will pop up asking
> for username/password before giving you access to any
page in the
> directory in which the page is stored.
>
> Just a thought.
>
> --
> Regards
>
> John Waller
>
Maybe you are looking for
-
Visibility of a field in webdynpro
Hi All, I am working on webdynpro.I am facing a problem.I have a field in one component say COUNTRY.If Country = 'some value',a field should visible.This particular field is in another component.How can I handle this? Can anyone gimme some inputs on
-
Photoshop CS5.1 will not open CR2 files. I am running OS X 10.10.1 and adobe photoshop camera raw 6.7.1. It was working fine when I had OS X Mavericks. It wasn't until I updated to Yosemite that the problem started.
-
Best way to set up AirPort Extreme with NetGear CG3100D-2
Hi All, I Just purchased a Airport Extreme and what to use it on my current cable broadband network. But i have a few issues with doing this, due to my exsisting setup. Here is my current set up. NetGear CG3100D-2 which i have 2 Port forwards set up
-
Photoshop fails to launch, "missing components" error
The application manager lists Photoshop as "up to date", yet the application fails to launch. How can I re-install?
-
Need information on oracle certified security admin for solaris 10
Hi All, I need some information on "oracle certified security admin for solaris 10 OS".The information what i am looking out is eligibility criteria and within oraganization any tranning provided . Regards, Uma Maheshwar.