Protecting Web Templates in 3.X

Hi all,
I just did the following test with minimal authorisation:
Open Web Application Designer
Open Web Template dialogue
Click on Web Template
Click on the delete bucket
I was able to delete random web templates.
Is there any way web templates can be protected from deletion??
ST01 didn't show anything useful.
Regards
Gerrit

Hello
Please have a read at below OSS note ,it would walk you through the detailed steps involved in migrating web temlates from 3.x to NW2004s
<b>832713 - Migration of Web templates from BW 3.x to Netweaver</b>
Hope it Helps
Chetan
@CP..

Similar Messages

  • How to call a BW WEB template from R/3 and pass parameters to the report

    Is it possible to call a BW web template from an R/3 system, through an abap program?
    I have a BW WEB report template. This works very good, and i have 3 variables in the query.
    Now, i need to invoke the BW web template from inside of an abap in R/3..
    And i want to pass 3 variables from the R/3 ABAP to the BW WEB TEMPLATE.....
    Is possible to call BW web templates from R/3??
    PLEASE!!! HELP ME..
    Carlos E. España
    ADATSA
    [email protected]

    Thank you very much for your valuable help, i checked your suggestion and looks great. But i need to pass 3 parameters from an ABAP to the wad query report.
    How can i pass the parameters to the web template???
    another issue: My WAS (Web Application Server 6.20) is not public, is currently working for a local area network.
    The access to this report is from outside of the office, so we need to access this through the PORTAL.

  • Header links in the web template is not working

    Hi all,
    I have a created webtemplete in that, header links in the web template is not working. But individually header links. I am not why they are not working in webtemplete.
    guys please help for above situation.
    Thanks,
    James

    Hi Bob,
    There are many XML schema files for the data connection, I recommend to check if the references to the XML files have been changed to the new schema files in the manifest file.
    For example, if we create a data connection called GetUserProfileByName, then there will be one XML file and three XML schema files for the data connection.
    Please make sure that all the references are updated in the manifest file.
    Thanks,
    Victoria
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Victoria Xia
    TechNet Community Support

  • Web template varaints

    hi, I want to change via program (abap or java) values in web template variants, but I dont know where this information is stored. Thanks for advice
    pp

    Hi all,
    as i described in some postings before the problem with local HTML-to-PDF Conversion utilities is that each BW USer must have a license for this lib. Also you have no Designtime integration, this means if you want to define headers and footers, Pagebreaks or report books all these solutions will not work.
    There is also another problem with these tools, f.e. you have Comboboxes or an navigation block included in your template, and you convert the executed template with ABC PDF to PDF you will have also the navigation block items with all the drilldown images printed on the pdf.  The printing paper of Tobias Kaufmann(a old cooleague and friend of mine) has also a problem with charts and custom text in the template.
    Also there is no automation support for these solutions  this means broadcasting of PDF'S is not supported.
    Our solution provides such features, but it is not finally released, but we are short before release 1.0.
    For interested people, which have special requests in the functionality can sent me an mail, where they can describe their needs. Deepu had seen some features in the past our solution.
    So do not hesitate to contact me:
    [email protected]
    best regards
    Kai wachter

  • Web Template dataproviders running sequentially?

    Hi,  We have a single web template with about 6 dataproviders.  We are noticing that the data providers are executing serially and we always thought that they would run in parallel?..  If a dataprovider is assigned to a query on a multiprover the SQL runs in parallel fine.
    It just looks like each dataprovider is running sequentially.  Can someone verify if they should be running sequentially or in parallel for a single web template?  If they should be parallel then what needs to be done to work?   
    Thanks!

    Hi Ken,
    I am also facing same problem. 10 Data Providers are linked to one web template.
    I think all the queries are running sequentially. And it is causing performance issue.
    Can you pls tell me how did you solve your problem.
    Pls email me at [email protected]

  • Creating a web template

    Hi All,
    My client asked me to create a web template for their web reports. They gave me their logo and asked me to include it on every web report as header. Also, they gave me the fonts and colors of the report headers and normal data and the footer etc...
    I do not know where and how to start. Can some one help me in this please...
    Best Regards,
    Nene.

    Hi Nene,
            Just now sent a document of creating web template to ur mail id [email protected]  Check and confirm the same.
    Cheers,
    Aravindhan

  • Using dynamic web template

    Hello every body:
    I'll design my web by ADW CS3 , I need using dwt extension, I
    know how I can used it by frontpage but I don't know how I can
    using it by DW, how I can attach dynamic web template,
    Can any body help me?
    Thank you.

    Open DW. Press F1. Read about how to create and use
    Templates.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "small digital" <[email protected]> wrote in
    message
    news:fvc2a7$nf0$[email protected]..
    > Hello every body:
    >
    > I'll design my web by ADW CS3 , I need using dwt
    extension, I know how I
    > can
    > used it by frontpage but I don't know how I can using it
    by DW, how I can
    > attach dynamic web template,
    > Can any body help me?
    > Thank you.
    >

  • Modify Web Template Parameters Using API or Javascript

    Hello Experts,
    I am using the Web Application Designer (WAD) to build a template.  We are on BW 7.01 (EHP1).  I am trying to find a way to set a command within the template to change one of the parameters of the Web Template itself.  I am very familar with how to use the SAP provided API Commands to change the Web ITEM parameters (like ANALYSIS item, CHART item, etc), but I do not see an API that will allow me to change the parameters of the Template itself.
    For example, in WAD, on the left hand side, you can select the "Web Template" item and set the properties.  For example:
    Display Variable Screen [VARIABLE_SCREEN]
    Reset Variable Values to Default [CLEAR_VARIABLES]
    Show Personalized Variables [SHOW_PERSONALIZED_VARIABLES]
    I would like to add a button to the template where I can allow the user to change some of these properties, but I don't see a way to do it.  Does anyone have any experience coding this?
    Thanks in advance for your help.
    Jose

    Hi ,
    According to your description, my understanding is that you want to retrieve list item values related to a specific version using JavaScript.
    We can also see the a specific version via the url …/_layouts/15/Versions.aspx?list=GUID….
    We can use the SharePoint List web service that exposes
    Lists.GetVersionCollection Method to return version information for the specified field in a SharePoint list.
    There are some similar posts for your reference:
    https://social.msdn.microsoft.com/Forums/en-US/02d29ce7-1a2b-4e91-9319-6dd43cde0bee/getting-the-version-history-of-a-list-item?forum=sharepointdevelopment
    https://social.technet.microsoft.com/Forums/systemcenter/en-US/4bd80e0e-a605-4c5e-b534-a189c346b978/csom-fetching-list-item-version-history-programmatically?forum=sharepointdevelopment
    (the last reply of Patrick)
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • Mail from Web Template : body text

    Hello,
    i created a button in my web template so that users can send a mail to confirm they have checked this months data. Nothing to fancy about it (not getting dynamicaly the variable values just some fixed text).
    This is the code i used:
    <FORM action="mailto:[email protected]
         ?subject=I have checked and approve the data for this month
          &body=Best regards"
          method=post encType=text/plain>
    <INPUT type=submit value="I have checked and approve the data for this month">
    </FORM>
    This works fine.
    Now my question : i want to have multiple lines in my body and i can't get thjis working (logic since i don't know much of HTML ). Anybody any suggestions?
    Thanks in advance for your help!

    Hi Tom,
    One small change whatever you are writing in
    Value="....."
    This Text will come on Button.
    So as explained earlier if you want more text on button you can do that.
    If you want more text in body than I think simply you can use
    <FORM action="mailto:[email protected]     ?subject=I have checked and approve the data for this month      &body=Best regards \n Tom"
    i.e. use "\n".
    Hope this helps.
    Regards,
    Ashish

  • What are pre calculation web templates

    hi
    what are the pre calculation web templates and pre calculation value sets
    can any one help me
    thank you
    devaraj
    [email protected]

    hi,
    this is the incorrect forum for your questions,
    you need one of these:
    /community [original link is broken]
    Kind regards, Rob Dielemans

  • Pre Calulated Web Templates

    HI BW Gurus
    Any One Can help me !! How to create Precalculated Web Templates.
    Can you send me link / PDF file to [email protected]
    Thanks in Advance
    Bhima

    Hi Pradeep,
    Thanks Pradeep
    Do you have any another Douments on Pre Calculated Web Templates .. PLz send me
    Do you have any Douments for Email distribution in web reports
    Thanks
    Bhima

  • Use web template to open a report from a menu

    Hi all,
    I have created one web template where I have a role menu that shows all reports that are available to the user. When the user clicks on one of these reports, the report displays in a new window. So far everything is working fine.
    But, I have also created another web template and I want the report that is displayed in a new window to use this template. How do I do this? I have been looking at the settings for the Role menu, but can't find anywhere to put the template name...
    Anyone have any ideas?
    Thanks and regards,
    Tove-Mette

    Hello,
    yes you can use the publish function, but only to add new entries.
    In Transaction pfcg (not in WAD or BEx) in SAP GUI and then select your role at the tab "Menu" you can add/remove/maintain/organize your menu.
    just click on a menu entry and take sth.like edit.
    Then you will see a link if you didn#t find the string &template_id= the system will take the standard template (Tranaction spro), and you can easily add or change this parameter.
    Hope that helps, please ask if you need further explanation.
    Regards
    Marcus

  • Problem of Query in Portal (web template)

    Hi BWs experts,
    I have a problem with a query.
    I'm working on BI7 (BI java patch 12 and BI  abap pacth 14).
    The query is good working in BEx Analyzer.
    Bus when  I execute it in a portal like a web template, it doesn't work. The following error occurs :
    Begin of message error
    ABEND RSBOLAP (000): Program Error in class SAPMSSY1 method  : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    com.sap.ip.bi.base.application.exceptions.AbortMessageRuntimeException: Termination message sent
    ABEND RSBOLAP (000): Program Error in class SAPMSSY1 method  : UNCAUGHT_EXCEPTION
      MSGV1: SAPMSSY1
      MSGV3: UNCAUGHT_EXCEPTION
    at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessageInternal(MessageManager.java:148)
    at com.sap.ip.bi.base.application.message.impl.MessageManager.addMessage(MessageManager.java:113)
    ABEND: Error program in class SAPMSSY1
    method  : UNCAUGHT_EXCEPTION
    ABEND: System error in progr. CL_RSMD_RS_SPECIAL and form. GETSID-01
    End of message error
    In the default values (= filter) I'm using a variable for a characteristic C. If I delete this default value in query designer, the query works in portal. If i put a filter (constant or variable) to this characteristic C, the query bugs in portal.
    So I don't know why it doesn't work.
    I hope you can help me to resolve this problem.
    Points will be assigned.
    Best cheers,
    Vince.

    hi,
    we're now getting the same message although that is after applying the java patch 12.
    what exactly was the problem with the info-object? and what did you do to fix it?

  • Error while executing a web template in browser

    Hi experts,
    I am facing an issue when I am creating copy of an existing web template and executing it.
    As per the query inserted in the web template, it should show the 'variable entry' screen, but its showing a page with lots of junk characters (looks like chinese to me).
    When I execute the already existing template, its showing the correct screen.
    Can anyone help me in fixing this issue?
    Regards,
    Uday.

    You are not alone - Looks like SAP is also looking into this.
    Web Application Designer Appearing in Unicode (UTF-8)

  • Error on page from BW 3.5's default web template

    Hi Guru's,
    We have a problem in our new BWD BW 3.5 environment where we are getting the "error on page" error from SAP-generated code and we aren’t sure why.
    On our old BWT BW 3.0b platform, we have been using a modified version of the 0query_template called Z_QUERY_TEMPLATE. We did a system copy of BWT to BWD, our new BW 3.5 platform. At that point in time we would see our old BW 3.5 default template for queries that we ran. We wanted to see what the new default web template looked like in BW 3.5. We found where we could remove the Z_QUERY_TEMPLATE from the Web Adhoc Analysis web template setting so we could see the new features of the BW 3.5 default BEx query designer template instead of our old BW 3.0b default template.
    Now when we run a query through the BW 3.5 query designer on BWD, we are using BW3.5’s default template. The prompt web page is fine. No errors on page messages.
    However, the initial presentation of the query results displays okay, but shows "error on page" in the message bar at the bottom of the displayed page. As soon as we do any navigation on those query results that error on page goes away. If we navigate back to the initial presentation, all is still okay. If we use the context menu to go back to start, we again get the error on page.
    This error on page does not happen in BQ2 (our new BW 3.5 QA environment copied from our old BW 3.0b QA environment where we had not yet changed the default BEx Query Designer template to be Z_QUERY_TEMPLATE). We have tried several queries and in each case, we get errors on page in BWD, but not in BQ2. We used ultraedit to compare the view source output from the equivalent web pages from BWD and BQ2 and the only difference is the validity date of the data. There are no other differences in the javascript code generated by BW in the two platforms.
    The statement that Internet Explorer is saying is the problem is the same in each of the cases we have checked and that is:
    SAPBWSetFocus(anchor);
    Error: Object expected
    Code: 0
    It’s in the set_tab() function.
    <script type="text/javascript">
    <!--
    /* Calls the online Documentation via technical QueryName */
    function callquerydoc() {
      var docustart= '/sap/bw/doc/meta/fldmeta/default?tlogo=elem&objnm=' + document.getElementById('querydoc').innerHTML;
      SAPBWOpenWindow(docustart,'Documentation',800,600);
    /* Sets the displayed tab */
    /* Check, which items of the Array check_items  is not hidden.
        Change the style of the HTML tag with id Group+Area/Group+Link */
    function set_tab() {
         if (!(navigator.appVersion.substring(0,1) == '4' && navigator.appName == 'Netscape')) {
           var check_items = new Array('GR1Toolbar','GR2Chart','GR3TECommon','GR4Broadcaster');
        for (i=0;i<check_items.length;i++) {
                        hidden = true;
                       prop = SAPBWGetItemProp(check_items<i>);
                       if (prop != null){
                                           for(j=1;j<prop.length;j++){
                                                      if (prop[j][0] == "HIDDEN")  hidden = (prop[j][1] == "X");
                   anchor_item = document.getElementById(check_items<i>.substring(0,3)+'Area').firstChild;
                    if (hidden) {
                        document.getElementById(check_items<i>.substring(0,3)+'Area').className='SAPBEXTbsTab';
                        anchor_item.title = 'Inactive Tab Page:' + ' ' + anchor_item.title; 
                    else {
                        document.getElementById(check_items<i>.substring(0,3)+'Area').className='SAPBEXTbsTabSel';
                        anchor_item.title = 'Active Tab Page:' +' ' + anchor_item.title; 
              } /* if */
          }   /* for */
        /* Set the BexHeader invisible when running as IView */
            if (SAPBWGetProperty('RUNS_AS_IVIEW')) {
                               document.getElementById('bexheader').style.visibility='hidden';
                               document.getElementById('bexheader').style.display='none';
              anchor = window.location.hash.substring(1,50);
              <b>SAPBWSetFocus(anchor);</b>
      }  /*function */
    -->
    </script>
    Because the error goes away as soon as we navigate I’m thinking some object isn’t being created or initialized, but since the view source code of these pages are identical I’m wondering if there is some code that should be executing before this page that is not happening in BWD for some reason.
    Any help will be much appreciated.
    Thanks,
    Jeri

    Heike,
    Thanks for your help in this. BWD and BQ2 are both on the same SP. SAP_BW release 350 level 10 (SAPKW35010) with BI_CONT at release 352 level 5 (SAPKIBIEP5).
    I invalidated the server cache following your instructions and tried again, but am still having the same problem in BWD. The initial display gets the "Done, but with errors on page" message until any navigation is done.
    I am using IE 6.0.2900.2180.xpsp_sp2_rtm.040803-2158 when I execute queries on both BWD and BQ2.
    Please, do you have any other suggestions?
    Thanks,
    Jeri

Maybe you are looking for

  • Dunning phases and blockades not visible for archived invoices in FPL9

    Hi experts, I am not able to see the dunning phases and blockades for archived invoices when i am opening FPL9 with archive. My requirement is that it should be visible and donot so any error message. Can you please provide me with the solution ? Tha

  • Custom defined FM for purchase price determination

    Hi all,    can anybody help me with the problem below..   In IS-retail im assigning a custom defined function module for purchase price determination (MM42 -> sales view -> PP det. seq - 06). example FM for which is WV_EXAMPLE_01.   but in the import

  • Ovi suite can't find Office Outlook

    I just did a clean install but now Ovi Suite doesn't detect Outlook anymore. I tried repairing, reinstalling and something I found in Nokia Beta labs: Go to "C:\Program Files\nokia\Nokia Ovi Suite\Connectors\MS Outlook Connector". type "regsvr32 MsOu

  • Windows 7 does not detect & install HP Colorlaser 2600n printer connected to wireless network

    I have an HP Colorlaser 2600n printer connected to a router set up for my wireless network. I have tried to installed the printer through the wireless network, as I have done with other computers, but my new HP dv7 laptop does not find the printer in

  • HELP ME! ITUNES??   CANT GET IT OPEN!!!

    MAYBE BIG LETTERS WILL DRAW ATTENTION! i get a glimpse of the liscense agreement page when i downloaded itunes and then it goes away real fast