Protection Fault Blue Screen

Hey,
I have a K7T Turbo2 with a 750 Duron. I have had the motherboard for about 4 months now and had no problems. But recently my computer froze so I had to shut it down because nothing would work. I left it alone for a day and tried to start it up the next day and after the Windows ME screen popped up I got the Blue Screen of Death saying "Protection Fault while trying to initialize Device CONFIGMG you must restart your computer." I figured it was either a bad boot file or a virus so I did both and scan disk and a virus scan but neither solved the problem. I tried updating my BIOS and that also did no good. The funny thing is that when I try to start it in safe mode instead of Device CONFIGMG it says Device ISO. Any help would be greatly appreciated. Thanks.
Eric

have you tried different memory or power supply? basically, swap out as many components as you can, but i would start with those 2. you should be able to get memchecker or something like that which runs in dos to check for bad memory.

Similar Messages

  • Blue screen with error ,radeon 5670 to play world of warcraft.says shutdown to protect

    Compaq SR 5710y,operating system is Vista 32-bit..My son used to play World of Warcraft and now it is crashing while playing.It appears a blue screen and says something like was shutdown for protection.I can not read it because it turn off very quickly, but it also says that one of the causes can be related to graphics or something like that. The computer has a Radeon 5670 video card inserted. 
    This question was solved.
    View Solution.

    lizy62,
    As I do have an HD5670 in my m8100eCTO, I bought this 530W PSU;
    http://www.newegg.com/Product/Product.aspx?Item=N82E16817182199
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • Blue Screen Error "Page fault in nonpaged area" when installing software?

    Hi,
    I just upgraded from Vista to Windows 7, and went on a computer-buying spree and bought a new router (WRT54GS2). Everything was working fine, until I went to actually install the software, at which point I got the Blue Screen of Death and the error message "page fault in nonpaged area." What can I do to fix it?

    Do not run the linksys CD to configure the router...You can configure the router manually.Connect the modem to the router on the internet port and the computer to the router on ethernet port..Now,open the GUI of linksys and configure the router.

  • Blue screen after log on shut down to protect computer.

    Can anyone help with my options.
    Im running windows vista.  Everytime i start my laptop after the log in screen i get a blue screen telling me my computer is shutting down for its protection.
    Wat do i do?

    Hello , 
    Thank you for your post!  I would suggest creating a new thread for your question in the (Windows Client TechCenter > Windows Vista IT Pro Forums > Windows Vista Security) forum located here:  (http://social.technet.microsoft.com/Forums/en-US/itprovistasecurity/threads).
    Hope that would be helpful.
    Have a great day!
    Thanks & regards,
    Ashawani
    Tier 2 Application Support
    Server and Tools Online Engineering Live Services Team

  • Reader 9.0, 9.1, 9.1.2 blue screening when opening multiple PW protected files

    I have a user, using MSOffice 2k3, who get a blue screen when opening multiple password protected files thru Outlook. The error suggests to update the BIOS, which has been done. This occurrs in all 3 versions of Reader 9. It specifically occurrs AFTER he inputs the password in the PW box. It does not matter which file he opens 1st. Any assistance would be appreciated.
    mburdikoff

    No, you are wrong (Gene & Mike). First, the forms, at least my forms, have NOT been edited since being created in designer. They were created and saved directly to flash. Second, this issue has been posted on the acrobat forum as well as the life cycle designer forum and both thread were ended with adobe expert posts saying it was an adobe reader issue and to post here.
    I have experimented more with this issue and it seems to be a 'trusted identity' issue within reader, but I have not wholely figured it out yet. My forms work on Reader, 7, 8, and 9. They work on all versions of 7 and 8 regardless of what the form was optimized for (my forms were optimized for 9 and higher). The only trouble is on 9.0. I have found that when updating on client machines, reader gives a prompt (sometimes) that says reader has found a set of trusted identities from a previous version, would you like to use these identies or create a new set of identities. If you choose to keep the existing trusted identies set, the form works, even when upgraded to reader 9.0
    Not trying to be argumentative (Mike and Gene) but the 'experts' bail on this issue by telling people it's a reader problem and to post here.

  • Equium M37-337 keeps crashing and blue screen list the fault as - igxprd32

    Hi,
    The laptop model number is Equium M37-337 PSM77E-00L00MAV
    from looking through the web I see this is a graphics issue.
    When starting the laptop it will go int Windows and then crash with a blue screen listing the above. This lasts only about half a second and then machine just goes to a black screen and nothing else.
    I am able to turn the laptop off by holding down the power button for several seconds. When I try and restart it returns to the black screen state.
    If I leave the laptop off for somre time (say 30 minutes) it reverts back to the startup to the Windows and then bluescreen black screen sequence.
    I have tried booting to windows safe mode but a similar crash occurs (although sometimes this is just the machine locking up with some thin black lines across the display.
    Is the on board graphics 'card' broken? Is this a common problem with this model? Is this economically fixable?
    Thanks
    Chris

    Hi,
    What I would recommend doing first would be to do a product recovery on the machine. Baring in mind that any data you have on the notebook will be lost by doing this; it is imperitave you back up your data first before going ahead with that.
    The reason I am saying you should do that first is if the repair do see this as a software issue, and should you have any extended warranties on the notebook, you would be charged (although this may be the case anyway). Also, baring in mind that if the product recovery does solve the problem then you could save yourself a whole lot of time with waiting for repairs.
    As far as I am aware there is no known issues with this machine where the graphics are concerned, and it's not something I have heard of with that model. As far as the repair being economical, I would first have a quote on the laptop. I know that would cost ?£35 but if the repair cost is within your budget and cheaper than a new unit then that'll be better for you.
    Unfortunately there is no way of finding out what the cost of the repair will be, as the repairs are done at a specalist repair centre, which is far from here. You'll have to have that sent in first for a quote before you'll know.
    I hope that helps,
    Regards,
    Nukey
    Edited by: ADMIN on 27-Apr-2008 07:50

  • Update on windows 10 preview version 10130 blue screens with f-secure as cause supplied by talktalk

    As soon as 10130 starts up blue screen critical process died the f-secure is supplied by talktalk version  Super Safe Boost 2.21 build 285CCF CUIF 10.03 build 258
    CCF DAAS2 1.10 build 369
    CCF Guts2 2.01 build 418
    CCF Upstream 2.01 build 980
    CCF Diagnostics 8.01 build 924
    CCF Scanning 1.51 build 112.309
    CCF Network 1.03 build 102
    CCF Reputation 2.0 build 1337 as soon as install is about to complete Blue Screen critical-process-died But as windows 10 no longer has F8 to enter safe mode and unable to do msconfig either it would leave a novice user with useless Computer. PS i had re-enabled F8 option so was able to do restore back having taken a checkpoint before adding the anti-virus also it left the pc in a mess and i had to do a chkdsk /F to recover the pc correctly as windows 10 was just like safe mode with no apps apart fromt event viewer and Run so able to do CMD.EXE and recover the situation i even re-installed the latest 10130 iso to guarantee a clean situation and again as soon as f-secure is installed it blue screens and can not be uninstalled as instalaion shows installed but as had nor completed will only remove icon  all previous releases worked as i was testing office 2003, photoshop etc as wanted to ensure migration from windows 7 to 10 would be uneventfull running in dual boot mode ------------------------------- how can i debug this problem . event viewer shows 3 errors------------------------------------------------------------------------Fault bucket , type 0Event Name: WindowsUpdateFailure3Response: Not availableCab Id: 0Problem signature:P1: 10.0.10074.0P2: 800b0101P3: F4932C69-501D-49CA-B507-0DF0531CB356P4: DownloadP5: 202P6: 0P7: 0P8: Dynamic UpdateP9: {7971F918-A847-4430-9279-4A52D1EFE18D}P10: 0Attached files:These files may be available here:　Analysis symbol:Rechecking for solution: 0Report ID: 3a290198-0a02-11e5-ab6f-0016448c363fReport Status: 262144Hashed bucket:------------------------------------------------------------------------------  Fault bucket , type 0Event Name: WindowsUpdateFailure3Response: Not availableCab Id: 0Problem signature:P1: 10.0.10074.0P2: 800b0101P3: F4932C69-501D-49CA-B507-0DF0531CB356P4: DownloadP5: 202P6: 0P7: 0P8: Dynamic UpdateP9: {7971F918-A847-4430-9279-4A52D1EFE18D}P10: 0Attached files:C:\WINDOWS\Temp\WER15AB.tmp.WERInternalMetadata.xmlThese files may be available here:C:\ProgramData\Microsoft\Windows\WER\ReportQueue\NonCritical_10.0.10074.0_514ab7a9a8ce992752eb54e1dd1412dafd33beb5_00000000_cab_110415cbAnalysis symbol:Rechecking for solution: 0Report ID: 3a290198-0a02-11e5-ab6f-0016448c363fReport Status: 4Hashed bucket:------------------------------------------------------------------------------------- Fault bucket 91736524612, type 5Event Name: WindowsUpdateFailure3Response: Not availableCab Id: 0Problem signature:P1: 10.0.10074.0P2: 800b0101P3: F4932C69-501D-49CA-B507-0DF0531CB356P4: DownloadP5: 202P6: 0P7: 0P8: Dynamic UpdateP9: {7971F918-A847-4430-9279-4A52D1EFE18D}P10: 0Attached files:C:\WINDOWS\Temp\WER15AB.tmp.WERInternalMetadata.xmlThese files may be available here:C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_10.0.10074.0_514ab7a9a8ce992752eb54e1dd1412dafd33beb5_00000000_111c1bb6Analysis symbol:Rechecking for solution: 0Report ID: 3a290198-0a02-11e5-ab6f-0016448c363fReport Status: 0Hashed bucket: e0ac3ecdf8185ff6d24e9c67904da683   maybe the version supplied to talktalk has a flaw which you have fixed and talktalk need a new version 

    Hi 
    Currently all versions of F-Secure Internet Security / SAFE will bluescreen with Windows 10 starting from Windows 10 build 10130. Only the beta version of F-Secure SAFE ("fs protection") is compatible.
    We know what is causing the problem and are working on maintenance releases. The products will be updated before Windows 10 launches.
    Ville
    (F-Secure R&D)
     

  • Blue Screen on Domain controllers after Updates

    After patching our Domain controllers (virtual on ESXi 5.5 U2) recently we started getting Blue screens and reboots. Other changes in our environment around this time include enabling vshield drivers and scanning with Trend Micro. I have removed patches
    from April but cannot remove Patch KB3020370 - there is no uninstall button. The error still persists, I have removed the Vshield driver and am waiting to see if the issue reoccurs. Can anyone assist in interpreting the details below? Also is it possible to
    remove the patch KB3020370? This only appeart to affect Domain Controllers, regular servers appear unaffected.
    Thanks
    Below is the BugCheck event.
    The computer has rebooted from a bugcheck.  The bugcheck was: 0x0000007f (0x0000000000000008, 0x0000000080050031, 0x00000000000406f8, 0xfffff800018c0e14). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 042915-21762-01.
    And output from the debug tool.
    Microsoft (R) Windows Debugger Version 6.3.9600.17237 AMD64
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [c:\MiniDump\042815-21762-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    Error: Attempts to access 'c:\windows\i386' failed: 0x2 - The system cannot find the file specified.
    ************* Symbol Path validation summary **************
    Response                         Time (ms)     Location
    Error                                          c:\windows\i386
    ************* Symbol Path validation summary **************
    Response                         Time (ms)     Location
    Deferred                                       srv*c:\symbols*http://msdl.microsoft.com/download/symbols
    Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
    Executable search path is: c:\windows\i386
    Windows 7 Kernel Version 7601 (Service Pack 1) UP Free x64
    Product: LanManNt, suite: TerminalServer SingleUserTS
    Built by: 7601.18798.amd64fre.win7sp1_gdr.150316-1654
    Machine Name:
    Kernel base = 0xfffff800`0185e000 PsLoadedModuleList = 0xfffff800`01aa3890
    Debug session time: Tue Apr 28 13:20:34.290 2015 (UTC + 1:00)
    System Uptime: 0 days 0:27:28.954
    Loading Kernel Symbols
    Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
    Run !sym noisy before .reload to track down problems loading symbols.
    Loading User Symbols
    Loading unloaded module list
    *                        Bugcheck Analysis                                    *
    Use !analyze -v to get detailed debugging information.
    BugCheck 7F, {8, 80050031, 406f8, fffff800018d4e14}
    Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
    Followup: MachineOwner
    kd> !analyze -v
    *                        Bugcheck Analysis                                    *
    UNEXPECTED_KERNEL_MODE_TRAP (7f)
    This means a trap occurred in kernel mode, and it's a trap of a kind
    that the kernel isn't allowed to have/catch (bound trap) or that
    is always instant death (double fault).  The first number in the
    bugcheck params is the number of the trap (8 = double fault, etc)
    Consult an Intel x86 family manual to learn more about what these
    traps are. Here is a *portion* of those codes:
    If kv shows a taskGate
            use .tss on the part before the colon, then kv.
    Else if kv shows a trapframe
            use .trap on that value
    Else
            .trap on the appropriate frame will show where the trap was taken
            (on x86, this will be the ebp that goes with the procedure KiTrap)
    Endif
    kb will then show the corrected stack.
    Arguments:
    Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT
    Arg2: 0000000080050031
    Arg3: 00000000000406f8
    Arg4: fffff800018d4e14
    Debugging Details:
    BUGCHECK_STR:  0x7f_8
    CUSTOMER_CRASH_COUNT:  1
    DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT_SERVER
    PROCESS_NAME:  System
    CURRENT_IRQL:  0
    ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
    LAST_CONTROL_TRANSFER:  from fffff800018cffe9 to fffff800018d0a40
    STACK_TEXT:  
    fffff800`01620d28 fffff800`018cffe9 : 00000000`0000007f 00000000`00000008 00000000`80050031 00000000`000406f8 : nt!KeBugCheckEx
    fffff800`01620d30 fffff800`018ce4b2 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
    fffff800`01620e70 fffff800`018d4e14 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDoubleFaultAbort+0xb2
    fffff880`0276e000 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!IopfCompleteRequest+0x4
    STACK_COMMAND:  kb
    FOLLOWUP_IP: 
    nt!KiDoubleFaultAbort+b2
    fffff800`018ce4b2 90              nop
    SYMBOL_STACK_INDEX:  2
    SYMBOL_NAME:  nt!KiDoubleFaultAbort+b2
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: nt
    IMAGE_NAME:  ntkrnlmp.exe
    DEBUG_FLR_IMAGE_TIMESTAMP:  5507a73c
    IMAGE_VERSION:  6.1.7601.18798
    FAILURE_BUCKET_ID:  X64_0x7f_8_nt!KiDoubleFaultAbort+b2
    BUCKET_ID:  X64_0x7f_8_nt!KiDoubleFaultAbort+b2
    ANALYSIS_SOURCE:  KM
    FAILURE_ID_HASH_STRING:  km:x64_0x7f_8_nt!kidoublefaultabort+b2
    FAILURE_ID_HASH:  {0367acc4-9bb4-ab69-5701-46a2011718e9}
    Followup: MachineOwner

    Hi,
    Dump file displays：
    BugCheck 7F, {8, 80050031, 406f8, fffff800018d4e14} and Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 ).
    Bug check 0x7F typically occurs after you install a faulty or mismatched hardware (especially memory) or if installed hardware fails.
    A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same stack. For example, if two file system filter drivers are attached to the same stack and then the file system recurses back in, the stack
    overflows.
    You may reference the link below for detailed resolution about this problem:
    https://msdn.microsoft.com/en-us/library/windows/hardware/ff559244(v=vs.85).aspx
    Besides, you may try to restore the server to the state before installing these Windows Update.
    Best Regards,
    Eve Wang 
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Windows 7, Blue Screen Local ID: 1033

    Lately i get this Blue Screen error and i have no idea what i should do:
    Problem signature:
      Problem Event Name:    BlueScreen
      OS Version:    6.1.7601.2.1.0.256.1
      Locale ID:    1033
    Additional information about the problem:
      BCCode:    50
      BCP1:    FFFFFAFDF700001A
      BCP2:    0000000000000000
      BCP3:    FFFFF80003178F5C
      BCP4:    0000000000000005
      OS Version:    6_1_7601
      Service Pack:    1_0
      Product:    256_1
    Files that help describe the problem:
      C:\Windows\Minidump\020214-15740-01.dmp
      C:\Users\Maria\AppData\Local\Temp\WER-47221-0.sysdata.xml

    MH
    These were related to amifldrv64.sys belong to CLICKBIOSII module developed by MSI.  I would install the newest driver available.
    Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 7601.18113.amd64fre.win7sp1_gdr.130318-1533
    Machine Name:
    Kernel base = 0xfffff800`02e13000 PsLoadedModuleList = 0xfffff800`03056670
    Debug session time: Tue Sep 17 10:40:08.022 2013 (UTC - 5:00)
    System Uptime: 0 days 0:00:28.849
    Loading Kernel Symbols
    BugCheck 50, {fffffaf5b100001a, 0, fffff80002f7af5c, 5}
    *** WARNING: Unable to verify timestamp for amifldrv64.sys
    *** ERROR: Module load completed but symbols could not be loaded for amifldrv64.sys
    Could not read faulting driver name
    Probably caused by : amifldrv64.sys ( amifldrv64+188c )
    2: kd> !analyze -v
    PAGE_FAULT_IN_NONPAGED_AREA (50)
    Invalid system memory was referenced. This cannot be protected by try-except,
    it must be protected by a Probe. Typically the address is just plain bad or it
    is pointing at freed memory.
    Arguments:
    Arg1: fffffaf5b100001a, memory referenced.
    Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
    Arg3: fffff80002f7af5c, If non-zero, the instruction address which referenced the bad memory
    address.
    Arg4: 0000000000000005, (reserved)
    Debugging Details:
    Could not read faulting driver name
    READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800030c0100
    GetUlongFromAddress: unable to read from fffff800030c01c0
    fffffaf5b100001a Nonpaged pool
    FAULTING_IP:
    nt!MmFreeContiguousMemory+ec
    fffff800`02f7af5c f6411a20 test byte ptr [rcx+1Ah],20h
    MM_INTERNAL_CODE: 5
    CUSTOMER_CRASH_COUNT: 1
    DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
    BUGCHECK_STR: 0x50
    PROCESS_NAME: SCEWIN_64.exe
    CURRENT_IRQL: 0
    ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
    TRAP_FRAME: fffff8800b252610 -- (.trap 0xfffff8800b252610)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=0000058000000000 rbx=0000000000000000 rcx=fffffaf5b1000000
    rdx=0000000fffffffff rsi=0000000000000000 rdi=0000000000000000
    rip=fffff80002f7af5c rsp=fffff8800b2527a0 rbp=fffff8800b252b60
    r8=fffffa800a0ae010 r9=00000000000000a0 r10=fffffa800670b210
    r11=fffffa800a0ae010 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0 nv up ei ng nz na po cy
    nt!MmFreeContiguousMemory+0xec:
    fffff800`02f7af5c f6411a20 test byte ptr [rcx+1Ah],20h ds:fffffaf5`b100001a=??
    Resetting default scope
    LAST_CONTROL_TRANSFER: from fffff80002f055a3 to fffff80002e88c00
    STACK_TEXT:
    fffff880`0b2524a8 fffff800`02f055a3 : 00000000`00000050 fffffaf5`b100001a 00000000`00000000 fffff880`0b252610 : nt!KeBugCheckEx
    fffff880`0b2524b0 fffff800`02e86d2e : 00000000`00000000 fffffaf5`b100001a fffffa80`08a81a00 fffff880`0273d000 : nt! ?? ::FNODOBFM::`string'+0x43801
    fffff880`0b252610 fffff800`02f7af5c : fffffa80`0a0ae010 fffff880`0a4014e7 fffffa80`1fffc000 fffffa80`0a306290 : nt!KiPageFault+0x16e
    fffff880`0b2527a0 fffff880`0a40188c : fffffa80`0a0ae010 fffffa80`08a81980 fffffa80`08a81980 00000000`00000016 : nt!MmFreeContiguousMemory+0xec
    fffff880`0b2527e0 fffffa80`0a0ae010 : fffffa80`08a81980 fffffa80`08a81980 00000000`00000016 fffff800`03018730 : amifldrv64+0x188c
    fffff880`0b2527e8 fffffa80`08a81980 : fffffa80`08a81980 00000000`00000016 fffff800`03018730 fffffa80`08a81980 : 0xfffffa80`0a0ae010
    fffff880`0b2527f0 fffffa80`08a81980 : 00000000`00000016 fffff800`03018730 fffffa80`08a81980 fffffa80`0a269b10 : 0xfffffa80`08a81980
    fffff880`0b2527f8 00000000`00000016 : fffff800`03018730 fffffa80`08a81980 fffffa80`0a269b10 fffff880`0a4019b4 : 0xfffffa80`08a81980
    fffff880`0b252800 fffff800`03018730 : fffffa80`08a81980 fffffa80`0a269b10 fffff880`0a4019b4 00000000`00000001 : 0x16
    fffff880`0b252808 fffffa80`08a81980 : fffffa80`0a269b10 fffff880`0a4019b4 00000000`00000001 00000000`00000001 : nt!NonPagedPoolDescriptor+0x1b0
    fffff880`0b252810 fffffa80`0a269b10 : fffff880`0a4019b4 00000000`00000001 00000000`00000001 00000000`000000a8 : 0xfffffa80`08a81980
    fffff880`0b252818 fffff880`0a4019b4 : 00000000`00000001 00000000`00000001 00000000`000000a8 fffff800`02f93744 : 0xfffffa80`0a269b10
    fffff880`0b252820 00000000`00000001 : 00000000`00000001 00000000`000000a8 fffff800`02f93744 00000000`00000000 : amifldrv64+0x19b4
    fffff880`0b252828 00000000`00000001 : 00000000`000000a8 fffff800`02f93744 00000000`00000000 fffffa80`0a306290 : 0x1
    fffff880`0b252830 00000000`000000a8 : fffff800`02f93744 00000000`00000000 fffffa80`0a306290 fffffa80`0a269b10 : 0x1
    fffff880`0b252838 fffff800`02f93744 : 00000000`00000000 fffffa80`0a306290 fffffa80`0a269b10 fffff880`0a401bff : 0xa8
    fffff880`0b252840 fffff880`0b252928 : fffff880`0b252968 fffffa80`0a41b060 00000000`00000001 fffff880`0b252960 : nt!EtwpCCSwapTrace+0x4d4
    fffff880`0b252900 fffff880`0b252968 : fffffa80`0a41b060 00000000`00000001 fffff880`0b252960 00000008`0a43ab01 : 0xfffff880`0b252928
    fffff880`0b252908 fffffa80`0a41b060 : 00000000`00000001 fffff880`0b252960 00000008`0a43ab01 fffffa80`0a306290 : 0xfffff880`0b252968
    fffff880`0b252910 00000000`00000001 : fffff880`0b252960 00000008`0a43ab01 fffffa80`0a306290 00000000`00000008 : 0xfffffa80`0a41b060
    fffff880`0b252918 fffff880`0b252960 : 00000008`0a43ab01 fffffa80`0a306290 00000000`00000008 00000000`00000000 : 0x1
    fffff880`0b252920 00000008`0a43ab01 : fffffa80`0a306290 00000000`00000008 00000000`00000000 fffffa80`0a269b10 : 0xfffff880`0b252960
    fffff880`0b252928 fffffa80`0a306290 : 00000000`00000008 00000000`00000000 fffffa80`0a269b10 00000000`00000000 : 0x00000008`0a43ab01
    fffff880`0b252930 00000000`00000008 : 00000000`00000000 fffffa80`0a269b10 00000000`00000000 fffffa80`06743820 : 0xfffffa80`0a306290
    fffff880`0b252938 00000000`00000000 : fffffa80`0a269b10 00000000`00000000 fffffa80`06743820 fffffa80`0a3062e0 : 0x8
    STACK_COMMAND: kb
    FOLLOWUP_IP:
    amifldrv64+188c
    fffff880`0a40188c ?? ???
    SYMBOL_STACK_INDEX: 4
    SYMBOL_NAME: amifldrv64+188c
    FOLLOWUP_NAME: MachineOwner
    MODULE_NAME: amifldrv64
    IMAGE_NAME: amifldrv64.sys
    DEBUG_FLR_IMAGE_TIMESTAMP: 4accc6d8
    FAILURE_BUCKET_ID: X64_0x50_amifldrv64+188c
    BUCKET_ID: X64_0x50_amifldrv64+188c
    ANALYSIS_SOURCE: KM
    FAILURE_ID_HASH_STRING: km:x64_0x50_amifldrv64+188c
    FAILURE_ID_HASH: {2881f1e0-4106-fe9b-c0f6-de1062eca6a6}
    Followup: MachineOwner
    Wanikiya and Dyami--Team Zigzag

  • Windows 7 - Blue screen error

    Hi,
    I am getting the blue screen error on windows 7. When I am opening IE9, i am getting blue screen.
    I have uploaded the dmp file in the sky drive and shared the link below.
    http://sdrv.ms/1cByXDL
    file name is :122513-46488-01.dmp
    Thanks in advance.
    Nanda kumar R | Senior Technical Analyst | Merrill Technology Services

    Hi,
    Use !analyze -v to get detailed debugging information.
    BugCheck 50, {fffff8810a4191a0, 0, fffff8800836bf68, 5}
    *** WARNING: Unable to verify timestamp for igdpmd64.sys
    *** ERROR: Module load completed but symbols could not be loaded for igdpmd64.sys
    Could not read faulting driver name
    Probably caused by : igdpmd64.sys ( igdpmd64+159f68 )
    Followup: MachineOwner
    2: kd> !analyze -v
    * Bugcheck Analysis *
    PAGE_FAULT_IN_NONPAGED_AREA (50)
    Invalid system memory was referenced. This cannot be protected by try-except,
    it must be protected by a Probe. Typically the address is just plain bad or it
    is pointing at freed memory.
    Arguments:
    Arg1: fffff8810a4191a0, memory referenced.
    Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
    Arg3: fffff8800836bf68, If non-zero, the instruction address which referenced the bad memory
    address.
    Arg4: 0000000000000005, (reserved)
    Debugging Details:
    Could not read faulting driver name
    READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800036c7100
    GetUlongFromAddress: unable to read from fffff800036c71c0
    fffff8810a4191a0 Nonpaged pool
    FAULTING_IP:
    igdpmd64+159f68
    fffff880`0836bf68 8b0408 mov eax,dword ptr [rax+rcx]
    MM_INTERNAL_CODE: 5
    CUSTOMER_CRASH_COUNT: 1
    DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
    BUGCHECK_STR: 0x50
    PROCESS_NAME: csrss.exe
    CURRENT_IRQL: 0
    TRAP_FRAME: fffff8800d08d9e0 -- (.trap 0xfffff8800d08d9e0)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=fffff88008d989a0 rbx=0000000000000000 rcx=0000000101680800
    rdx=fffffa800466d920 rsi=0000000000000000 rdi=0000000000000000
    rip=fffff8800836bf68 rsp=fffff8800d08db70 rbp=fffffa80083a7d40
    r8=0000000000000001 r9=fffff8800d08dbd0 r10=0000000000000001
    r11=0000000000000001 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0 nv up ei pl nz na po nc
    igdpmd64+0x159f68:
    fffff880`0836bf68 8b0408 mov eax,dword ptr [rax+rcx] ds:fffff881`0a4191a0=????????
    Resetting default scope
    LAST_CONTROL_TRANSFER: from fffff8000350c5b3 to fffff8000348fbc0
    STACK_TEXT:
    fffff880`0d08d878 fffff800`0350c5b3 : 00000000`00000050 fffff881`0a4191a0 00000000`00000000 fffff880`0d08d9e0 : nt!KeBugCheckEx
    fffff880`0d08d880 fffff800`0348dcee : 00000000`00000000 fffff881`0a4191a0 fffffa80`06a58000 fffff880`0d08df70 : nt! ?? ::FNODOBFM::`string'+0x43801
    fffff880`0d08d9e0 fffff880`0836bf68 : fffffa80`06a58000 fffffa80`0466d920 fffffa80`06a58000 fffffa80`0466d920 : nt!KiPageFault+0x16e
    fffff880`0d08db70 fffffa80`06a58000 : fffffa80`0466d920 fffffa80`06a58000 fffffa80`0466d920 fffffa80`06a58000 : igdpmd64+0x159f68
    fffff880`0d08db78 fffffa80`0466d920 : fffffa80`06a58000 fffffa80`0466d920 fffffa80`06a58000 fffff880`080b4040 : 0xfffffa80`06a58000
    fffff880`0d08db80 fffffa80`06a58000 : fffffa80`0466d920 fffffa80`06a58000 fffff880`080b4040 fffffa80`07be9298 : 0xfffffa80`0466d920
    fffff880`0d08db88 fffffa80`0466d920 : fffffa80`06a58000 fffff880`080b4040 fffffa80`07be9298 fffff880`00000000 : 0xfffffa80`06a58000
    fffff880`0d08db90 fffffa80`06a58000 : fffff880`080b4040 fffffa80`07be9298 fffff880`00000000 fffffa80`087f4ff8 : 0xfffffa80`0466d920
    fffff880`0d08db98 fffff880`080b4040 : fffffa80`07be9298 fffff880`00000000 fffffa80`087f4ff8 fffff880`0836c39c : 0xfffffa80`06a58000
    fffff880`0d08dba0 fffffa80`07be9298 : fffff880`00000000 fffffa80`087f4ff8 fffff880`0836c39c fffffa80`087f4fe8 : 0xfffff880`080b4040
    fffff880`0d08dba8 fffff880`00000000 : fffffa80`087f4ff8 fffff880`0836c39c fffffa80`087f4fe8 fffffa80`0466d920 : 0xfffffa80`07be9298
    fffff880`0d08dbb0 fffffa80`087f4ff8 : fffff880`0836c39c fffffa80`087f4fe8 fffffa80`0466d920 fffffa80`00000001 : 0xfffff880`00000000
    fffff880`0d08dbb8 fffff880`0836c39c : fffffa80`087f4fe8 fffffa80`0466d920 fffffa80`00000001 fffff880`00000001 : 0xfffffa80`087f4ff8
    fffff880`0d08dbc0 fffffa80`087f4fe8 : fffffa80`0466d920 fffffa80`00000001 fffff880`00000001 fffffa80`0466d920 : igdpmd64+0x15a39c
    fffff880`0d08dbc8 fffffa80`0466d920 : fffffa80`00000001 fffff880`00000001 fffffa80`0466d920 fffff880`0d08dcc8 : 0xfffffa80`087f4fe8
    fffff880`0d08dbd0 fffffa80`00000001 : fffff880`00000001 fffffa80`0466d920 fffff880`0d08dcc8 fffffa80`087f51a8 : 0xfffffa80`0466d920
    fffff880`0d08dbd8 fffff880`00000001 : fffffa80`0466d920 fffff880`0d08dcc8 fffffa80`087f51a8 fffffa80`087f5608 : 0xfffffa80`00000001
    fffff880`0d08dbe0 fffffa80`0466d920 : fffff880`0d08dcc8 fffffa80`087f51a8 fffffa80`087f5608 fffffa80`00000001 : 0xfffff880`00000001
    fffff880`0d08dbe8 fffff880`0d08dcc8 : fffffa80`087f51a8 fffffa80`087f5608 fffffa80`00000001 fffffa80`06a58000 : 0xfffffa80`0466d920
    fffff880`0d08dbf0 fffffa80`087f51a8 : fffffa80`087f5608 fffffa80`00000001 fffffa80`06a58000 fffffa80`00000000 : 0xfffff880`0d08dcc8
    fffff880`0d08dbf8 fffffa80`087f5608 : fffffa80`00000001 fffffa80`06a58000 fffffa80`00000000 fffffa80`0466d920 : 0xfffffa80`087f51a8
    fffff880`0d08dc00 fffffa80`00000001 : fffffa80`06a58000 fffffa80`00000000 fffffa80`0466d920 00000000`00000001 : 0xfffffa80`087f5608
    fffff880`0d08dc08 fffffa80`06a58000 : fffffa80`00000000 fffffa80`0466d920 00000000`00000001 00000000`00000000 : 0xfffffa80`00000001
    fffff880`0d08dc10 fffffa80`00000000 : fffffa80`0466d920 00000000`00000001 00000000`00000000 00000000`00000000 : 0xfffffa80`06a58000
    fffff880`0d08dc18 fffffa80`0466d920 : 00000000`00000001 00000000`00000000 00000000`00000000 00000000`00000000 : 0xfffffa80`00000000
    fffff880`0d08dc20 00000000`00000001 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0xfffffa80`0466d920
    fffff880`0d08dc28 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x1
    STACK_COMMAND: kb
    FOLLOWUP_IP:
    igdpmd64+159f68
    fffff880`0836bf68 8b0408 mov eax,dword ptr [rax+rcx]
    SYMBOL_STACK_INDEX: 3
    SYMBOL_NAME: igdpmd64+159f68
    FOLLOWUP_NAME: MachineOwner
    MODULE_NAME: igdpmd64
    IMAGE_NAME: igdpmd64.sys
    DEBUG_FLR_IMAGE_TIMESTAMP: 4cf338bf
    FAILURE_BUCKET_ID: X64_0x50_igdpmd64+159f68
    BUCKET_ID: X64_0x50_igdpmd64+159f68
    As ZigZag3143x said, the memory dumps blame Intel graphic driver.
    So I recommend you to download fresh graphics drivers from
    http://downloadcenter.intel.com.
    Also, could you please tell me if you have installed new updates (eg
    kb2670838) recently?
    Thanks!
    Andy Altmann
    TechNet Community Support

  • Blue screen when powering off

    I recently purcahsed a one year old Lenovo 3000, it had Windows XP installed and I upgraded this to Windows Vista with no problems. I then renamed the laptop and deleted the previous owners user files and that's when I had a problem. When I power down the laptop I get a Blue Screen saying something about a dump and saying it was doing something to protect my PC ?  I found some kind of fault finding log and it mentioned something about the pc's name and also something about being unable to access a certain user file. I changed the computer name back to the original one and unerased the original user file but I still get the Blue Screen when powering down.
    Is it possible to get a replacement software DVD that will get me back to square one please, thanks for any help. Dan McLean in Port Glasgow. 

    This really sounds like shoddy drivers combined with an IRQ conflict.
    I suggest you post your IRQ's from System Info, for example:
    IRQ 0   System timer   OK
    IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
    IRQ 4   Communications Port (COM1)   OK
    IRQ 5   WinFast TV2000 XP WDM Audio Capture   OK
    IRQ 6   Standard floppy disk controller   OK
    IRQ 8   System CMOS/real time clock   OK
    IRQ 9   Microsoft ACPI-Compliant System   OK
    IRQ 11   NVIDIA nForce PCI System Management   OK
    IRQ 12   Logitech-compatible Mouse PS/2   OK
    IRQ 13   Numeric data processor   OK
    IRQ 14   Primary IDE Channel   OK
    IRQ 15   Secondary IDE Channel   OK
    IRQ 16   RADEON X800 XT Platinum Edition   OK
    IRQ 17   WinFast TV2000 XP WDM Video Capture   OK
    IRQ 18   Creative SB Live! series   OK
    IRQ 20   NVIDIA Network Bus Enumerator   OK
    IRQ 21   Standard OpenHCD USB Host Controller   OK
    IRQ 22   Standard OpenHCD USB Host Controller   OK
    IRQ 23   Standard Enhanced PCI to USB Host Controller   OK
    Also, as you intend to DL and install the  nVidia Drivers make sure you get the sound drivers from Realtek Downloads too.
    What Drivers are you using for the AIW?
    Take all the Driver CD's and make pretty Christmas tree ornaments out of them
    ~Edit~ I just looked at the stop error again and realized I misread, then I saw Supershanks post My initial suspicion is likely to be wrong, but it's worthe a look anyway.

  • Satellite L650 - frequent computer restart with blue screen

    Hi, I bought an L650 about 2months ago so it is still under warranty.
    Recently (maybe last 2 weeks) it has continued to shut down with blue screen of death. It seemed to occur more if I opened up many tabs in internet and i thought it might be adobe flash but don't think so anymore.
    It says if there is new hardware or software installed try reinstall it but I do not know which software and there is no new hardware.
    "a problem has been detected and windows has been shyt down to protect your computer
    A process or thread crucial to system operation has unexpectedly exited or terminated.
    technical information:
    *** STOP: 0x000000F4 (0X00000000000003, OxFFFFFFFFAB007A4B30, 0xFFFFFFFFFA(rest off screen from camera)
    xFFFF800035C#1EO
    Somthing like above although its quick video on my camera so some numbers may be wrong.
    Can someone help if this is a hardware malfunction or my fault somehow?
    Is this a warranty problem or what should I do?
    I never made any windows CD or anything when I bought laptop unfortunately so do not know if I can reformat harddrive?
    Thanks.
    Kadin

    Hello
    It is worst than at the beginning with STOP: 0x000000F4 error message. It is always problematic to help with such problems because your notebook configuration, preinstalled software and activity is not known to us.
    In my opinion you should back-up all your important data, install OS again using HDD recovery option and test functionality with original OS without any additional software installation.
    If the BSOD will occur again and again I recommend you to contact nearest Toshiba service and ask for help. I have two Toshiba notebooks and until now I didnt notice BSOD at all.

  • HP dv9740us not going past blue screen with page_fault_in_nonpaged_area error

    I have had very few problems with my laptop until recently.  I have had a couple of minor crashes that I could fix by doing a hard restart.  Last night, I was playing an online game and suddenly my game started to bog down then it froze up completely.  I tried to ctrl+alt+delete to restart and nothing happened.  So I ended up holding down the power button until it shut down.  As soon as it started to reboot, it went into a black screen asking for start up repair or start windows normally.  I tried repair, and it took me to the screen, did a little running of the program, then went black.  When I was ready to hit the power button it flashed several windows in both blue and black and finally ended up with the blue screen telling me I had the page_fault_in_nonpaged_area error.  I tried several things:  restarted again, ran disk tests on both disks(passed), a memory test(passed), and am now backing stuff up to an external drive.  It will not get past that error or that blue screen.  Both my husband and I have decent experience with this kind of thing, but neither of us are able to fix it.  I also tried to follow the instructions for reseating the memory.  Nothing works.  I don't want to lose my important files, especially all of the pictures of my son's first year.  Please Help!!!
    I want to add that I have not added any new programs lately.  The only thing causing problems has been a PC Matic add-on to do real time protection.  That stops working everytime I open windows.

    http://technet.microsoft.com/en-us/library/cc957625.aspx
    This Stop message occurs when requested data is not found in memory. The system generates a fault, which normally indicates that the system looks for data in the paging file. In this circumstance, however, the missing data is identified as being located within an area of memory that cannot be paged out to disk. The system faults, but cannot find, the data and is unable to recover. Faulty hardware, a buggy system service, antivirus software, and a corrupted NTFS volume can all generate this type of error.
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

  • Windows Blue Screen Error Message Appears As Soon As IPod Connected

    Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

    Hi Mike thank you for replying,
    I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
    I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
    If you can help me out or suggest where to search it would be much appreciated.
    Thx

  • A60: Blue Screen error message after recovering procedure

    i have an A60, and over the last 3 months i have ran the recovery disk 10-15 times, windows installs fine, then a few days later the computer either freezes and gives a blue screen of death when you try to turn it on, or it starts up and comes up with a message saying "windows explorer has encountered a problem" and then completely stops responding, or gives a similar message regarding something called Dr Watson Kernal Debugger and equally, stops responding, now. having tried formatting and scanning as well as getting on my knees and begging the computer to please please please work, i am out of ideas, maybe the hard drive is the problem? is it a common A60 fault?
    also in a completely unrelated issue, where can i get a new "c" key, mine keeps falling off for some reason.

    Hi
    Usually the blue screen appears because of a serious software or hardware malfunction.
    In you case I suggest that there could be something wrong with the hardware. Of course there could be also something wrong with the HDD. But to be 100% sure you should contact the Toshiba service. He can make some diagnostic tests.
    You can also order the additional keyboard buttons from the Toshiba service partner who is responsible for your country.

Maybe you are looking for