Protective cover that works with road trip

I'm about to purchase an Ipod Classic but I'd first like to find a protective cover or skin that I can keep on when it's hooked up to road trip. I had a former Ipod that would not fully connect the the charger/transmitter when I had a simple silicon skin on it. Any suggested cases or skins? Thanks

Hi flightywriter.
The only option is to remove the case/cover from the tablet, while setting it up on the Cradle.
Note: If my post answers your question, please mark it as an "Accepted Solution."

Similar Messages

Case that works with smart cover on?

Has anyone seen any shells or cases that work with the smart cover on? I have only come across one.
Thanks

SF Bags, aka Waterfield Designs, has several designs made to fit the iPad 2 with the Smart Cover. I, too, have the original Ultimate Exo Sleevecase, but it is a bit large for the iPad 2. They recommend buying the "non-Exo" Ultimate case for the IPad 2.
One case that I particularly like is the SmartCase, and they make a model that fits with iPad 2 with the Smart Cover; it has a pouch on the back for earphones, etc.. I have a similar one for my iPhone and it is very well-made and offers a lot of protection.
They have seven different iPad cases and several are designed specifically for the iPad 2 with the SmartCover.
If you have any questions, you can write them, and they answer them promptly.

A UPS model that works with Mac Native software to do a graceful shutdown and automatic restart during a power failure.

I've tried 3 UPS's (2 APC and one TripLite) that state they are OSX compatible, however, they do not fully respond to the native osx setting in (system Preferences/ Energy Saver/ UPS/Start up automatically after a power failure). This is what happens:
During a power outage, the OS does a graceful shutdown, but does not reboot when power is restored.
Apparently, the UPS is not notified to turn off during the shut down process. The power (on-Off-On) cycle is required by the mac to restart.
Trip lite tech support says they have software that works with Windows and linux to do this, but not mac.
I've tried two older APC UPS's, One Smart UPS1500 and a Back-UPS 1500 with the same result on two different servers and one iMac.
At this point I'm looking for a make and model of a UPS that does work. If anyone can verify a make and model that actually does this, I'd greatly appreciate it.
Its a simple test, just pull the plug on your UPS, wait for the system to shut down, and then plug the UPS back in. The system should reboot.

Many of the CyberPower UPS units are compatible. Checkout the home solutions on this page: http://www.cyberpowersystems.com/products/ups-systems.html

Docking Speakers that Work with Hard Case

Hey there. I am going to get an iPod Video and I am going to be getting a hard case for it and because of previous iPod experiences, I do not want to take my iPod out of it ever again. Thus, as I look for docking speakers, one of my main concerns is that I can dock the iPod whilst the case is still on. Are there any good docking speakers that work with the Contour iSee hard case?
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wo/4.RSLID?mco=1 6E37974&nplm=TG336LL%2FA
Any suggestions would be greatly appreciated.

Hey!
By appearances it looks much like the Agent 18 case I use.Although I can't see the Dock access on the one you are looking at but they say "easy access to ports".If that's the case,you should be able to use the Bose Sounddock.I do and never take my Pod out.Just can't use the insert(not a major problem)for a snug fit.I can use all the ususal dock connectors too.Also,when you get your 5th Gn,leave the plastic film on the front.Also protects your clickwheel,and from scratches off the case itself.It does happen....
Cheers,
John

I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7

I have an older HP5550C flatbed scanner that works with 10.5 and 10.6 but not on my new iMac running 10.7. Surely there is software that will allow older scanners to work on OS10.7. My MacBook Pro runs 10.6 and the

Although the HP Scanjet shows up in the system profile for the computer it is generic and is not configured (as in screen shot). It also does not show up in the ;ist of pritnters, scanner when I open Image Capture. I can't load the software that came with the printer because it is out of date so that would make it impossible to configure the scanner on the new iMac. see below: Too bad there isn't some generic profile I could load that would cover the 5550c. I have a new all in one printer-fax-scanner but the old one can scann in slides and negatives which I have.

Debugger that works with WebLogic 5.1?

Are there any debuggers currently available that will work with WebLogic
5.1?
I assume that VisualCafe 4.0 (Expert Edition) will support local debugging,
but I'm also interested in remote debugging which the Expert edition does
not support.
If not, does anyone know when VisualCafe Enterprise Edition 4.0 will ship?
Thanks.
Greg

Hi!
I have problem to get the co-client debug project to run. Do you have
the same problem?
-----Original Message-----
From: Terry Potter [mailto:[email protected]]
Posted At: måndag, augusti 07, 2000 23:18
Posted To: tools
Conversation: Debugger that works with WebLogic 5.1?
Subject: Re: Debugger that works with WebLogic 5.1?
I use the deistributed debugging that comes with Visual Cafe by Webgain
v4.0. It works fine.
"Jim Piersol" <[email protected]> wrote in message
news:3989ccec$[email protected]..
Get a real debugger. Try BugSeeker from http://www.karmira.com
Jim Piersol
Senior Software Engineer
Sun Certified Java Programmer
Strata Group, Inc.
[email protected]
"Greg Kim" <[email protected]> wrote in message
news:8ibuit$35e$[email protected]..

Found x-platform remote debugger that works with WLSv4.5.1!!

[att1.html]

Hi!
I have problem to get the co-client debug project to run. Do you have
the same problem?
-----Original Message-----
From: Terry Potter [mailto:[email protected]]
Posted At: måndag, augusti 07, 2000 23:18
Posted To: tools
Conversation: Debugger that works with WebLogic 5.1?
Subject: Re: Debugger that works with WebLogic 5.1?
I use the deistributed debugging that comes with Visual Cafe by Webgain
v4.0. It works fine.
"Jim Piersol" <[email protected]> wrote in message
news:3989ccec$[email protected]..
Get a real debugger. Try BugSeeker from http://www.karmira.com
Jim Piersol
Senior Software Engineer
Sun Certified Java Programmer
Strata Group, Inc.
[email protected]
"Greg Kim" <[email protected]> wrote in message
news:8ibuit$35e$[email protected]..

How can I make an icon that links to a webpage that works with Mac and Windows??

Hi!
I burn CDs with my photos and send them to clients. Besides the photos folder, I would like to include a file (similar to the .webloc files on the Mac Desktop) that can be clicked and it will be linked to my website - it will open up a browser window and go to my website . Is it posssible to make one of these icons that works with both Macs and Windows machines? Thanks!

Now it works! Thanks, Denico!
The reason I saved to text: The first time I followed your instructions, it did not work. I tried to figure out what I did wrong and saw that you wrote to "save as plain text." I did not know what this means and there was no option available to save a plain text. So I looked around and saw "save as stationery" and I guessed that maybe that was what you meant. And after that, it worked! But the next thing you know, the icons started duplicating themselves.
I guess I had made a different mistake in the beginning and I fixed it without knowing what it is.
Thanks for clearing that up.
But just one question. WHY does saving as "stationery" make an icon duplicate itself?

I just upgraded to os 10.9.5. When I try to open iPhoto, I am told that the version I have(9.3), is not compatible with the os. But it came with it when I upgraded. What do I have to do to get an iPhoto that works with 10.9.5? TIA

I just upgraded to os 10.9.5 on my 15 " macbook pro from os 10.7.5. When I try to open iPhoto, I get the message that it is not compatible with the os. How can that be??? It came with the upgrade. It says the version of iPhoto is 9.3. How do I get an iPhoto that works with os 10.9.5? TIA

This screenshot shows which previous versions of iPhoto are compatible with Mavericks. It also indicates which versions qualify for a free upgradeto iPhoto 9.5.1 and which require a purchase:
Note 1: every day more users are reporting problems with iPhoto 8.1.2 so I've included it in the non compatible category.
Note 2: If your previous version of iPhoto was iPhoto 7 (08) or earlier you'll need to download and run the iPhoto Library Upgrader 1.1 application on the library before opening it with iPhoto 9.5.1

Looking for an app that works with Mac and iPhone that will set calendar reminders of birthdays in contacts.

Looking for an app that works with Mac and iPhone that will set calendar reminders of birthdays in contacts.

Hi ron1098,
Try my application Dates to iCal. it runs on the Mac, but you can sync the calendar to your iOS device.
See more about Dates to iCal here. It is £4 shareware with a 2 week demo.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Anyone know a calendar creator program / software for iMac/MacBook that works with Maverick?

Looking for a Calendar Creator type software that works with Maverick for iMac / MacBook. Please help.

Quicken 2007
Quicken 2015 information

What is the latest version of bluetooth that works with IOS 6.1.6 on an iphone 3gs

what is the latest version of bluetooth that works with IOS 6.1.6 on an iphone 3gs?? I'm thinking of getting some bluetooth earbuds, but don't know if 6.1.6 will work with any bluetooth version beyond v2.1...Any thoughts, anybody???

The iPhone 3GS supports Bluetooth 2.1 and earlier; all versions of Bluetooth are backwards compatible.
(118058)

I purchased Label Printer Pro 7, but it does not work. It crashes. Please recommend an address/shipping label program that works with Avery labels. Thanks.

I purchased Label Printer Pro 7, but it does not work. It crashes. I press print, and the program closes. I press save, and the program closes. I press print and the program closes. I have had an email exchange with Pabel Printer Pro 7, but the best they could offer was to go to Utilities and click on fixed permssions. I have done that several times, and the program still doesn't work.
Can you please recommend an address.shipping label program that works with Avery labels that I can purchase, and that is also simple to use?
Thanks,
Paula

I purchased Label Printer Pro 7, but it does not work. It crashes. I press print, and the program closes. I press save, and the program closes. I press print and the program closes. I have had an email exchange with Pabel Printer Pro 7, but the best they could offer was to go to Utilities and click on fixed permssions. I have done that several times, and the program still doesn't work.
Can you please recommend an address.shipping label program that works with Avery labels that I can purchase, and that is also simple to use?
Thanks,
Paula

How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)?

How can I obtain a version of Print Studio Pro that works with Photoshop Elements 13 (64 bit)? The advertising refers to Print Studio Pro 2 but all I find available to download is version 1.35.

Thanks - I did notice that the 2 was a superscript on one site but on another (I think the one for the Pro-10 printer) it was definitely a 2 in line with the rest of the text and separated by a space (at least on my browser). At any rate, I suspected something of the kind and will simply use Photoshop Elements 11 when I want a pattern print until the change is made.
If you have an inside line to Canon you might also suggest some changes to their Image Garden program, specifically its handling of DVD label projects. It has several themes and within each theme several layouts. As far as they go these are fine but they do not give nearly enough flexibility. The boxes for insertion of images are useful as is the simple procedure for rescaling the image so it is cropped in varying ways while staying within the fixed box. However, it should be possible (a) to relocate the boxes on the page and (b) to resize and reshape the boxes - probably by a control which would become available by right-clicking on the box. For example, there are times when the user might want to include a full 16 x 9 frame shot as one of the images, and in general the aspect ratios of the provided boxes do not permit this.
I have over the years preferred to use Word for this purpose after setting up masks to expose just the printable area of the DVD or Blu-ray disc, setting up the margins so that the center of the disc is in the horizontal center of the page, and finally introducing text and pictures and adjusting the font size of blank lines above the disc to line everything up properly in the vertical direction. A typical layout might involve one large picture, located so the center hole and the curved outer edge do not block anything important, or two pictures side by side, or four pictures centered vertically (to minimize the effect of the outer edge of the disc) but possibly of different widths (so as to make both close-ups and wide scenes optimal on the same disc label). The text then goes above and below the pictures. All of this works perfectly so I probably wouldn't use Image Garden very often for this purpose, but the inability to resize and relocate the boxes must be very limiting for others as well.
Some of the layouts have image locations severely reduced by the edge of the disc.
As I said ... if you have an inside line to Canon .. but if not, please excuse the length of this post!

Any pre keyed effect sites that work with adobe premiere elements 11?

I have been trying to find a legit non scam/virus site with pre keyed effects like explosions, gunshot fire, fire, and other effects like that.
Most sites that I've tried are virus' or only work with imovie.
Anyone know of any good sites that have pre keyed effects that works with adobe premiere elements 11? (they don't have to look good, I am just practicing with those)

In my book "Cool Tricks & Hot Tips for Premiere Elements 11", I recommend and show you how to use clips from the wonderful site http://detonationfilms.com/ to create explosive effects.

Protective cover that works with road trip

Similar Messages

Maybe you are looking for