Protective strip in MacBook Pro disc drive?

While installing some software on my MacBook Pro, I noticed that a thin strip made of some type of plastic or protective coating came loose when my DVD drive kicked out the disc. The gray strand is about as long as the disc drive opening. Is this something that protects discs from scratching in the drive? Or is it something that I can just tear off and not worry about? Has anyone else had this issue? Thanks!

i just got the same problem, my macbook pro is less then a week old and when it spat out a disk it also ripped the protective felt strip from the entrance to the optical drive, i just tore the last little bit off that was attached. these things are really annoying when you try and keep your macbook pro in pristine condition after spending nearly AU $4000 on it. should i take it back to the apple dealer from were i bought it? or just not worry about it.
This is it here...
http://i429.photobucket.com/albums/qq14/paschkow/Photo2.jpg
http://i429.photobucket.com/albums/qq14/paschkow/Photo1.jpg

Similar Messages

Macbook pro disc drive

Hi guys,I just bought a new macbook pro 13 inch 2.4ghz model,all is good but I do have a question,when I put a disc in the drive it reads it fine,but lets say if I move my macbook a little on my lap I can hear the disc in the drive make a scratching noise,but theres no scratches on the disc,is this normal? Also after I eject the disc using the eject button the disc still shows up on my desktop,I have to move the disc to the trash can to get it off my desktop,My imac doesnt do this,is this something macbooks do? Thank you for any help.

I researched and the noise while theres a disc in the drive is normal since im moving it while the disc is spinning,I just wanted to make sure it wasn't a faulty drive. But I still cant figure out why the disc isn't disappearing after I eject it.
edit: it seems to only be doing this with Rewritable disc.
Edit: It seems like it was just that once disc that was the problem. Sorry
Message was edited by: surfer13134
Message was edited by: surfer13134

Whenever i put any disc in my macbook pro disc drive, it doesn't mount it and its ejected automatically

my macbook pro doesn't mount any disc. it just eject it automatically......any help

Have you tried cleaning the drive?
charlie

Macbook Pro disc drive failing to burn DVD-R.

I am using a 2007, 17" Macbook Pro with 10.6.8. My drive information in System Profiler reads as follows:
MATSHITA DVD-R   UJ-85J:
Firmware Revision:          FBZ8
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2048 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, DVD-DAO
Media:          To show the available burn speeds, insert a disc and choose View > Refresh
I am trying to burn an .mp4 video to a DVD in order to test the disc for playback. When I insert the disc, it appears first in the Finder as a blank DVD. I click and drag the video to the DVD and hit "Burn." What follows is an error message:
"'Untitled DVD'" can't be burned because the disck is read-only and can't be modified (error code 0x80020042)."
After that, the disc ejects, and I am back at square one.
I have looked online for similar cases and suggested solutions, but nothing has worked yet. I have verified and repaired my disk permissions via Disk Utility, tried to burn multiple times with different, fresh DVD-Rs, purchased brand new DVD-Rs, and even tried changing the permissions manually via the "Info" panel.
I do not have iDVD or any other third party DVD burning software. In the past, I used iDVD and these very same DVD-Rs to burn a number of student films for playback. At that time, the process was very simple and worked as one might expect it to.
I am wondering if I should just get iDVD or another third party software, but I am reluctant to, because I would think that the OS' built-in burning capability ought to work just as well. Of course, I could easily be mistaken.
Please help. Thank you.

Some clarification:
I am not trying to burn a data disc. If that is what I just described, I was unaware that I was attempting to burn a data disc. I am trying to burn a video DVD for playback on a DVD player. If you or anyone here are trying to tell me that I cannot burn a video DVD by performing the process I described, then I will continue to attempt to use the third party software I downloaded instead.
Further clarification:
The problem does not appear to be with the discs. I began testing this issue using Memorex DVD-Rs that I already own. Until today, I had barely touched the stack. However, because it was technically possible that I was using several coasters that I had forgotten about, I went out and bought some additional DVD-Rs - the Verbatims. It is highly unlikely that both the Memorex stack I already owned and the Verbatim discs I just purchased are both duds. I know for a fact that the Memorex discs should work because I have several archived DVD videos on the very same discs.
The real problem appears to be with the drive and how it is reading the discs. For some reason, it is recognizing them as "read-only" and/or not blank, as System Profiler has shown:
Media:
Type:          DVD-R
ID:          CMC MAG. AM3
Blank:          No
Erasable:          No
Overwritable:          No
Appendable:          Yes
Write Speeds:          2x, 4x, 8x
I have attempted to Repair Disk Permissions twice - that has not solved the issue. I am going to attempt an SMC reset next, and if that fails, I will attempt to Repair Disk via the install DVD. Failing all of those options, I guess I'm going to have to visit a Genius Bar.
Thank you all again. Please try to stay with me as I continue handling this issue, as I will provide updates.

My MacBook Pro DVD drive keeps spinning and looking for a disc when there isn't one.

My MacBook Pro disc drive keeps spinning and looking for a disc when there isn't one in there. The DVD application is closed and as far as I can tell, the eject button is not stuck. I've restarted, but the problem persists. Please help!

Try these methods:
credit Kappy,
Ciao.

My MacBook Pro Hard Drive recently gave me the gray folder with the question mark of death. Even as

My MacBook Pro Hard Drive recently gave me the gray folder with the question mark of death. Even as a Mac Newbie/Novice, I successfully installed a new hard drive and the OS (10.6.8) software from my installation discs. I have, however, lost the ability to play video using the spacebar and I have no idea on the steps necessary to correct this seemingly simple technical blip. .Here's my system overview:Model Name: MacBook Pro Model Identifier: MacBookPro6,2 Processor Name: Intel Core i5 Processor Speed: 2.4 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache (per core): 256 KB L3 Cache: 3 MB Memory: 4 GB Processor Interconnect Speed: 4.8 GT/s.
I am using the Premiere Pro CS5 NLE (with the 5.0.4 updates), and I have tried to reinstall the software (which is actually the Production Premium package) several times, but I still cannot use the spacebar (or any method) to play any of my imported videos.
PLEASE HELP in any way you can!
Prior to having to replace my hard drive, my software was working just fine. No problems at all. But now, it seems that I can't get it to play whatever type of file I import.
Again, I am a newbie to the Mac, so any and all correctional/repair assistance needs to be expalined as if I were a child : )
I would hate to try to revert to considering the sophmoric Final Cut Pro X editing software package, but I've got to do something to be able to get back to my editing activities.
zionhall
[email protected]

Jorge242 wrote:
@FatMac the internet recovery doesnt work. It goes into recovery mode and then when i try to reinstall it cant find a disk to install it to. So what would be a good choice to take now?
Recovery Mode presents you with, among other things, Disk Utility. When you open that, if the internal shows up at all, first try to "Repair DIsk." If that doesn't work but if the "Media" line is present, try to format and partition it with a GUID partition table (understand that you will be erasing the contents of your internal). Then try to reinstall the OS. If that doesn't work, and since your Retina MBP didn't come with a DVD drive or DVDs, you'll need to try a hardware test using these instructions from Apple (short version: shut down, press the power button and hold down the "D" key). If none of those things work, let's hope you either have AppleCare or your warranty has some life left because the SSD in your rMBP is proprietary and expensive. You'll need to bring it to an Apple Genius for evaluation.

My macbook pro hard drive died. I only have a windows hard drive and an old powerbook G4 which of course you can't use to create a boot disk for my macbook. How can I solve this?

I can't get app store on my old power book to download OS X, My macbook pro hard drive died and all I have is a windows hard drive, still has windows os on it, a 500 Gb USB drive and this power book. How can I get my macbook back up without spending money? Thanks

And what happens if the OPs Mac is of a newer version that came with a version of Snow Leopard above the 10.6.3 version that is on that Retail, meant for Upgrade, disc? Like if it came with 10.6.4/.5/.6/.7? That disc you linked to would not work.
He needs to contact Apple and get a replacement set of Original System Reinstall Discs. That is the only way he can be assured it will work and he would also get the iLife apps which he wouldn't buying that DVD disc you linked to.
dwb wrote:
The Snow Leopard DVD is $20 from Apple. You'll just have to wait a few days. BTW this is a full installer that works with any model computer that can run SL. Apple used to ship recovery/installation disks that were tied to specific computer models so that a 15" MBP installer disk coudn't be used on a 13" MBP computer. So you need either full installer or the recovery disks for your specific model.
And BTW, I have a 2009 13" MBP w/8GB RAM that is running Mavericks. With a 5400 RPM drive I used to experience a bit of beach balling (think hour glassing) but an SSD has given it new life. It feels now slower than the newest MBPs - it obviously benchmarks considerably slower but in everyday use it doesn't feel like a 4 1/2 year old computer at all.

Transferring files from MacBook Pro hard drive to Time Capsule

I recently bought a Time Capsule. I know I can use that as an external hard drive to save disc space on my MacBook Pro. How can I transfer files that are already on my MacBook Pro hard drive to the time capsule? For instance, I have videos of my daughter saved on MacBook Pro that I can view on iTunes or transfer them to either my iPhone or iPod Touch. Is there a way to either move individual files or the entire folder to Time Capsule?
Thank you!

Open the folder and drag the contents over.

Can i use a macbook pro to drive an iMac as a monitor?

can i use a macbook pro to drive an iMac as a monitor?

If that configuration supports Target Display mode, use it. If not, use a product such as ScreenRecycler.
(104456)

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extrem. How do I get Itunes to search for the music here with out trying to copy it to my laptops hard drive??

I can not store all my Music on my internal Macbook pro hard drive so I am storing it on a large external drive connected to my airport extreme (2 TB drive plugged into the USB port). I see the drive on my laptop and I can add and delete files no problem. How do I get Itunes to search for the music here with out trying to copy it to my laptop's hard drive? I don't have enough space to do that.

How did you move the music to the external drive? What exactly is on the drive? The entire iTunes folder or only music? If it is the entire iTunes folder you can do the option+start suggestion earlier. If you copied only music and did so by dragging it there then you need to delete it again and consolidate/organize it there instead so iTunes tracks the move. iTunes 12 for Mac: Change where your iTunes files are stored - http://support.apple.com/kb/PH19507

My MacBook Pro hard drive crashed a little while ago and has been replaced. Is it possible to take tunes from iPod Classic and transfer all of them back to iTunes on computer?

My MacBook Pro hard drive crashed a little while ago and has been replaced. Is it possible to take tunes from iPod Classic and transfer all of them back to iTunes on computer? Is this just for purchased tunes or can I do it for ones that have been burned from CD's as well? Thanks for any help!

[Zevoneer's detailed instructions on getting music off an iPod|http://discussions.apple.com/message.jspa?messageID=9053179]
[Wired's How To: Get Your Music Off of Your iPod|http://howto.wired.com/wiki/Get_Your_Music_Off_of_Your_iPod]
[http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipod-window s-mac-os-x/]
[Topic: Get music off iPhone|http://discussions.apple.com/message.jspa?messageID=11512841]
[Copying iTunes Store purchases from your iPod or iPhone to a computer|http://docs.info.apple.com/article.html?artnum=305465]

My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

My MacBook Pro hard drive is almost full and I wish to store my Aperture Library on an external drive, how do I do this and is the use of USB2 suitable or do I need to use a Firewire external hard drive?

You'll get better performance if you use a Firewire hard drive (especially if you buy a 7200 RPM drive). Firewire's IO speed is significantly faster than USB 2. USB 2 has a theoretical max speed of 480 Mbps except that it has extremely high over-head. The fastest speeds you can typically get are about 300 Mbps. Firewire, on the other hand, has very little overhead. The fastest speeds you can get are very nearly 800 Mbps. You will typically be constrained by the maximum read/write speed of the drive, not the speed of the I/O on the Firewire bus. Now if you had one of those nice shiny new Macs with the Thunderbolt I/O and a Thunderbolt drive (Light Peak) ... I think they alter space and time so that your data arrives before you know you want it.
Also... unless you want to buy a solid state drive (very expensive), try to keep your hard drives from becoming much more than about 60% full if you want great performance. A nearly "full" hard drive is, on average, only about half as fast as the same hard drive when nearly empty.
USB 2 will work perfectly fine... just not as fast.
Also... it's much safer to move the entire Aperture library than to "relocate masters". Your images must be managed. You can Aperture manage them, or you can manage them. But someone has to manage them. If you "relocate" them so that they are no longer stored inside the Aperture library then you'll need to work out a system of how you decide to organize things and it's critically important that you don't start moving files around or deleting things without Aperture's knowledge. If you do, you'll break the links to your masters and start having problems with missing masters. If you have Aperture manage the library then you don't need to worry about any of that stuff.... it's safer.
Do make backups (use the Aperture Vault or use some other backup program, but make sure you back up your work if you care about it.) There are only two kinds of hard drives in the world: (1) those that have failed and (2) those that are going to fail. There are no exceptions to this rule. Hard drives are cheap. Backup software is built into Aperture and into your Mac.

New 15" Macbook Pro hard drive failure

It is common for a 15" Macbook Pro hard drive to crash after 3 months? How does Apple Support generally fix? Genuis bar seemed overwhelmed by holiday crowds and recommended an $8k 3rd party vendor.

"Any disk can fail at any time."
Over a large sample, the drives used are extremely reliable. You did not have a large sample, you had ONE drive.
Now you are much smarter than you were before this disaster. Apple will not pay for your data recovery. You (and everyone) need a backup solution.
Apple provides an excelent backup solution called Time Machine, that can do hourly backups to an external drive without disturbing your current work. Buy yourself an external drive at least twice as large as the built-in. Turn on Time machine, make sure it is working, plug it in at least daily, and then don't worry about it any more.

My macbook pro hard drive went bad and i bought a new one and installed it. Now i have the old corrupted hard drive in my hand and i am looking to recover my files from it, any suggestions please? too bad i never backed them up.

My macbook pro hard drive went bad and i bought a new one and installed it. Now i have the old corrupted hard drive in my hand and i am looking to recover my files from it, any suggestions please? too bad i never backed them up.

After you have installed the OSX on the new HDD in your MBP, install the old HDD in an enclosure and connect it to your MBP via USB. Then try to drag and drop your data to the new HDD.
If this proves unsuccessful, you may look for data recovery software on the Internet. There will be free trails to see if it will work or not. If the trial suggests that it will work, then you will have to purchase the software.
The last resort is a professional data recovery service that will offer NO guarantees and charge a lot of money.
As you now can appreciate, backups eliminate such predicaments.
Ciao.

Can I Replace my Early 2009 Mac Mini Hard Drive with my Early 2011 Macbook Pro Hard Drive?

I am replacing my 2011 Macbook Pro Hard Drive with a Solid State Drive. Instead of keeping the hard drive on an external enclosure I was wondering if I can use it to upgrade my Mac Mini's 160GB hard Drive with the one Im taking out of the MBP. And if so, is there any special formatting I would need to do?

It should work fine. No special formatting required. It actuality, I suspect that if you connect the HD, the Mini will boot into the OSX that was on the MacBook.
When you replace the HD in the Mini just be careful with the antennas and their wires and connections I accidentally disconnected the wifi antenna on mine when I replaced the HD.

Protective strip in MacBook Pro disc drive?

Similar Messages

Maybe you are looking for