ProtectLink not registering all "Instances Blocked"

I currently have a trial version of Protectlink running on oiur RV220W wireless N network security firewall. I have set up several URL filtering categories and tested them to ensure they work (IE aution site - Ebay.ca & Ebay.com). Both of them get blocked by protectlink when it is selected in the filtering, however they do not get added to the "instances blocked" count. they also are not getting thrown into the syslog on our syslog server (Splunk). i have enabled the remote logging to the proper server because i am getting other logging information from the router, but the blocked events are not coming through. like i said the web sites ARE getting blocked in the browser, however they are not getting added in the "instances blocked" calculation OR getting sent to the syslog. Are there any other setting that i need to do so that these will get added? I would like to be able to create a report on how much this technology is actually getting used.
thanks!
Tom

Both the Listeners SCAN and Local Listeners Should be in the Grid_home/network/admin not in the ORACLE HOME.
If you have created your local listener in both the servers thru grid home..
Paste the O/P of lsnrctl status local listener - on both the nodes. Thank you.
Regards
Naveen

Similar Messages

Edit find/change (not finding all instances)

I am using Edit>Find/Change to change a brand name in a document — however, this feature is not finding ALL instances of the brand name. I am having to manually/visually edit through the entire doc. Suggestions?

Hi,
You could check whether "Case sensitive" is switched on in your find/change dialog. Also check that your find format options are cleared. Click the "More Options" button if the find format options are not showing in the dialog.
Regards,
Malcolm

Adobe Creative Cloud does not register all of my Adobe programs.

Adobe Creative Cloud properly shows my Adobe Photoshop CS6 as registered. However, it does not show my Adobe Acrobat XI Pro, or my Adobe Photoshop Lightroom 4.4 as registered. How can I get these programs to be properly registerd as "MY APPS" in Adobe Creative Cloud?

I didn't have a trial version when I installed Acrobat, but I did have the free version of Reader installed at the time.
I've had Adobe Photoshop for many years, and have upgraded a couple of times. Photoshop CS6 and Lightroom was purchased a year ago (so it is not the latest). Acrobat was purchased in December of last year, which is the latest. It's been awhile, and I should have got on this sooner.
So, everything was OK last year, until I installed Adobe Acrobat XI Pro, which does not show up on the CC app.

Mouse button not register all clicks

I have a problem with my mouse, sometimes when I click, it doesn't click. This usually happens in the dock, when I open up 2 programs, I have to click out of the dock before I can open another program, otherwise it won't recognize the click. Has this happened to anyone else?

Yes! I just started having the same problem. The same thing happens in other places too - I have to click out of a program or window then click back in so it will register. Also, sometimes it seems to think I'm double-clicking when I'm not. At first I thought it was my mouse so I plugged in another one but it still happens. I haven't changed any of the mouse settings. I hope someone out there can help us, it can get pretty annoying and slow down a lot of tasks.

Vista not registering all memeory

I'm running Vista Home premium on my Mac Pro with 3 gig of RAM. Vista only shows it has 2 gig available. Any suggestions on fixing this issue.

I read it somewhere that Vista reserved some memory for exclusive system use so you can't see all memory you installed. Like 3GB will show up as 2.95GB or 2.85GB. However that still means Vista recognized all 3GB of the memory you have in your computer.
Vista SP1 now does this differently: it tells you all the memory your machine has, although some of them are still reserved for exclusive system usage.
If you want to use 4GB you need Vista x64 -- it's the only way.
In your case I think one of your memory chip is down. It's highly unlikely for Vista to take over 1GB out of 3 for itself.
Hope this helps.

Error -2147319779 Library not registered when trying to use ActiveX to open microsoft word

Hi
I am having problems when I try to run an executable on a PC. My Development PC that has Labview 8.2 and Microsoft Word 2000. I am able to run my vi (see pic attachement) without any problems. I compile it as an executable and run it on my Development PC and everything still works ok. I deployed it on another machine with Labview Run-Time Engine Version 8.2 and it works ok. I tried it again on a third PC and get the following error
Error -2147319779 Library not registered
All PC's are running windows XP and all have microsoft word 2000 installed.
I have tried uninstalling National instruments software (Run-time Engine) as well as Microsoft Word on the failing PC, but still no luck.
Does anyone have any suggestions.
Thanks
Steve
Attachments:
open word and save changes.jpg ‏59 KB

Hey Steve,
I hate to throw links at you, but it appears this problem has occurred with developers before.
Easy text Report.VI...not so easy (You have to love a title like that)
Problem with LabVIEW Run Time communicating with Access Database
These links may not seem relevant to your issue, but at its base the Report Generation and Database Connectivity toolsets are simply ActiveX/.NET calls into Microsoft products (or ODBC, etc.). This is similar to what you're doing.
Also, I would try reinstalling MS Office. This has been known to solve the problem.
Cheers.
| Michael K | Project Manager | LabVIEW R&D | National Instruments |

Icloud not finding all my devices

My iCloud account is not registering all of our devices. We are trying to give someone else an iPad mini, but we can't set it up because it wants us to remove it from our find my device feature. We went to remove it, but it isn't listed.

Do you still have the iPad with you? Does it prompt you to enter the Apple ID and password directly on the iPad?

Crystal 10 server to bo xi 3.1 not all instances

I have used the import wizard to pull the reports across into BO XI 3.1 on server 2003. I get the reports and folders but not all the existing instances of the reports. There are 480 + reports and alot of instances all of which are needed.
Has any one done this migration and get all the historic instances?

If you use the import wizard to bring in the reports, there is an option when you get to the 'Folders and objects' selection tool. Right below the 'Select All' and 'Clear All' buttons, there is a checkbox which states 'Import all instances of each selected object'. This should select all of the instances for the objects selected. One thing to note: It will not import instances that failed to run. You can check the log after the import to see what failed and why after the import. This should give you an idea of what you may have to do on your XI 3.1 environment in order to capture the instances desired.

My hard drive went and when i got my computer back from being fixed my itunes had been deleted, so i re installed it however my ipad wont connect to the itunes as its not registered to this itune, also all my songs arent on here what do i do?

My hard drive went and when i got my computer back from being fixed my itunes had been deleted, so i re installed it however my ipad wont connect to the itunes as its not registered to this itune, also all my songs arent on here what do i do?

There is no such thing as an "SG3" or "SG4". Did you possibly mean a 3GS and iPhone4?
It has always been very basic to ensure that a backup exists of your media and other important files. Computers fail, hard drives crashes... things happen. Do you not have a backup? The iPhone, like all iDevices is NOT a backup of your media, but rather a mirror of the content in the iTunes library on your computer.
If your contacts, pics, etc are not on your computer, no backups of the iPhone exist, and they are not on the phone, they are gone.
No one can magically make them re-appear.

TS4268 I am able to imessage from my ipad all phone numbers in contacts but one. With it a get an error message that say "number is not registered with imessage". However I am able to imessage that number from my iphone. Any suggestions?

I am able to imessage from my ipad all phone numbers in contacts but one. With it I get an error message that says "number is not registered with imessage". However, I am able to imessage that number from my iphone. Any suggestion?

Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David

I attempt to send an e-mail to an address in my Directory and it comes up in a pink block with a red circled exclamation point at the end. "Clicking" on the circle brings a pop-up saying the address is not registered for iMessages. How do I register ??

When I try to address an e-mail to an address in my iPad's Directory, the name comes up inside a pink block with a red circled exclamation point at the right hand end. "Clicking" on the red circle, gives me a pop-up saying the address is not registered for an iMessage. How do I register my Directory addresses for an iMessage??

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
 Cheers, Tom

I can't download Firefox. Windows is blocking it, saying the source is not registered.

I am trying to download Firefox, but Windows/Internet Explorer 8 is blocking it...saying the file is not registered/certified etc. I tried to upload the certificate, but it still won't let me do it. Seems like another Microsoft attempt to stop people from using competing software. How can I get around this so I can start using Firefox?

If the above doesn't work, your issue may be caused by Firefox files left from the previous install.
In this case, please delete the Firefox installation folder, which is located in one of these locations, by default:
*'''Windows:'''
**C:\Program Files\Mozilla Firefox
**C:\Program Files (x86)\Mozilla Firefox
If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
If the above doesn't work, please also delete the Firefox application data from your computer.
WARNING: Removing folders/files can cause damage to other programs and the Windows operating system. use caution when manually deleting folders/files. Creating a backup of any deleted files is highly recommended!

I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC. I'm registered and my itunes account/ appleID are all correct and working.

I'm getting this error message: "User not registered for online use" when i'm trying to download music/ track names from a CD into ITunes on my Windows 8 PC. I'm registered and my itunes account/ appleID are all correct and working.

The ""not recognized for on-line use". error is associated with the Gracenote service that iTunes uses to look up and retrieve metadata for CDs. Some users have reported that this error occurs when trying to import from CD, subsequent to upgrading to version 12. A number of slightly different solutions have been reported (though all of a similar nature).
Try walking through the following steps - before starting you may have to enable hidden files and folders to be viewed - in Windows 7 / Windows Explorer select Organize > Folder and search options, then on the View tab make sure that Show hidden files, folders and drives is selected. Without this you won't see the AppData folder in C:\Users\username\
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this doesn't work:
In iTunes, select Edit > Preferences and make a note (or take a screenshot) of your preferences settings in all relevant tabs
Exit iTunes
In Windows Explorer, go to the folder C:\Users\username\AppData\Roaming\Apple Computer\iTunes
Delete the following file:iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If this second procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1.
If this one didn't work:
Exit iTunes
Check the following folders:
C:\Users\username\AppData\Local\Apple Computer\iTunes
C:\Users\username\AppData\LocalLow\Apple Computer\iTunes
Delete any copies of the following files:
CD Info.cidb
com.apple.iTunes.Gracenote.plist
iTunesPrefs.xml
Restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
Again, if this procedure does work, you'll need to restore other iTunes preferences settings to those that you noted in step 1 of the second procedure. If you're still not able to retrieve CD info:
Exit iTunes
In Windows, select Start > Control Panel > Programs and Features. Find the entry for iTunes, right-click and select Repair.
When this process has finished, restart iTunes
Insert a CD and see if details are now correctly retrieved from Gracenote
If none of these have worked (and almost everything I've seen suggests you should be OK by this point), you may have an issue with the installation and configuration of iTunes itself. If you have got this far, see turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for advice on how to remove and replace of all components of iTunes.

How to block domains not for all mailboxes in our organization?

Hello everybody! Need some advice - I have a script to block some domains ("black domains list") - I am using this command: Set-SenderFilterConfig -BlockedDomains:$list But now I need to block these domains not for all mailboxes in our organization,
for example: somebody is sending a message from "black" domain company.com and there is a mailbox [email protected] - so only this user should receive message from "black" domain. Any others should receive nothing even their addresses
are in copy. Is it possible? Thanks.

Hi,
When we use Set-SenderFilterConfig –BlockedDomains to block domain, exchange will block any messages from that domain without any exception.
The only thing I can think of is transport rule, so please try to create this transport rule to have a test:
If this transport rule doesn't work, then there is no way to block domain not for all mailboxes in organization based on my knowledge.
Best Regards.

TS4268 my imessage and facetime tell me that all my contacts are not registered

My ipod touch says that all my contacts are not registered and so i cannot facetime them or imessage, but it was working earlier. help please

Apple problem
http://www.apple.com/support/systemstatus/

ProtectLink not registering all "Instances Blocked"

Similar Messages

Maybe you are looking for