Protege 2010 cannot start Slimline Combo drive

Hi
I have two Portege 2010 with two different Slimline Combo drive for Cardbus Cable - neither of the two computers are able to start the Slimline Combo drives. Both computer with each different drive were working perfectly in the beginning of September, but none now.
One computer does not recognise the drive at all - the other respond in the hardware profile, that it cannot start the drive.
Both computers run Windows XP 2nd edition.
Thank you
Best regards
Anne Mette Voss

Hi
Do you mean the external PC card CD/DVD drive cannot be recognized in the Windows XP?
Hmm I think Ive got a idea.
I think you should access the device manager and remove the *Texas Instruments PCI card bus controller* and the *Toshiba ToPIC100 CardBus controller*.
Then reboot the notebook.
After the reboot the OS should install a new hardware (both CarBus controllers) and after this installation you could try to connect the external PC card CD/DVD drives again!
Good luck

Similar Messages

Microsoft lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program

Dear All Good day
i have Lync server 2010 and runing Good
yasterday some users cann't open Lync Client and give us this error Massege
microsoft lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program, or the product key information may have been modified in your windows
registry . please uninstall and then reinstall lync.
but another users runing Good
i'm try to unistall lync Client and install again but same problem
and Try to Install New server lync 2010 but same problem
please help me for resolve this problem
Khaled Eldosuky
Senior System Engineer
[email protected]

Hi All,
I was not able to uninstall the trial lync client, and re-install a new client? Any help will be appreciated?
All i see is the below message....
microsoft
lync 2010 cannot start. the product license may be expired because you are using a pre-release or evaluation copy of the program, or the product key information may have been modified in your windows registry . please uninstall and then reinstall lync.
Regards,
Venkat

Macbook Pro won't start after Combo drive replacement

I have a Macbook Pro 1,1 which had a non-functiong Combo drive. I got a similar Combo drive out of a Macbook 1,1, and put it in the mbp. I have the HD partitioned in three with 10.6.3, 10.6.8 and Windows XP on the partitions.
Since replacing the Combo drive the computer will not boot from the 10.6.8 partition, but it boots fine from the other two! I have started it is taget disk mode, and connected to a Macbook and the Macbook will boot from the 10.6.8 partition.
When I try to start the mbp frpm the 10.6.8 partition I get the Apple logo, then the spinning wheel, then finally a stop sign (circle with a slash through it).
Does anyone have any ideas what I can do to resolve this problem?

gim461,
try booting from the 10.6.3 partition, and run Disk Utility. Try verifying the 10.6.8 partition (using the Verify Disk button). Does it come back with a clean bill of health? If not, press the Repair Disk button. When that’s done, reboot into the 10.6.8 partition, but hold down the Shift key to boot into Safe mode. Does it let you boot into the 10.6.8 partition in Safe mode?

Outlook 2010 : Cannot start Microsoft Outlook. Cannot open the Outlook window.

Hi
Using Outlook 2010 with an Exchange 2003 back-end.
Already have an Outlook profile (created in Outlook 2003).
When launching Outlook 2010 I get:
"Cannot start Microsoft Outlook. Cannot open the Outlook window"
I've read several posts with this error message and a common "workaround" / "solution" was to run: “Outlook.exe /resetnavpane”
I tried that and it didnt resolve the issue.
The only way I found to resolve this was to create a new Outlook profile.
Launching with a new Outlook profile works fine.
- Is this a "known issue" ?
- Is there a way to diagnose / throubleshoot further without having to create a new profile?
Thanks
- AL

Hi,
Thank you for using Outlook IT Pro Discussions forum.
This problem can occur when file that maintains the Navigation Pane settings becomes corrupted. This file is called profilename.xml, where profilename is the name
of your Outlook profile. Normally, we can resolve this issue by starting Outlook with the command
Outlook.exe /resetnavpane
or
creating a new Outlook profile.
Next time, you may also try to rename the profilename.xml from the folder first to see if the issue can be resolved:
Windows XP: C:\Documents and Settings\username\Application Data\Microsoft\Outlook
Windows Vista, Windows 7: C:\Users\username\AppData\Roaming\Microsoft\Outlook
For more information, you can refer to this KB article:
Error starting Outlook: "Cannot start Microsoft Office Outlook. Cannot open the Outlook window."
http://support.microsoft.com/kb/2022778
Best Regards,
Sally Tang

Outlook 2010 cannot start because of patches

Ok this is twice now auto updates are playing havoc. I hope it is not just here. Last update I had people tell me outlook could not start. After investigating I found if I removed KB2956128, outlook works again. It installed this
update twice, I removed one and all went back to normal. Yesterday. Same issue with KB2956203, Anyone else having this issue? Again, it appears to have been installed twice?????
TIA,

Hi,
Thank you for your reporting. We have noticed this, and would like to collect more information for further investigation.
Can you guys share your detailed system info? Also, if you have any log files about the issue, kindly share with us by sending them to this email account:
[email protected] (please use the link of this thread as the subject).
We appreciate your assistance with this.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

High Definition Audio Device - Device Cannot Start (Code 10)

I am having a problem isolating an indication in the Device Manager with the High Definition Audio Device. I have Intel Graphics with this machine. The OS is W10 Pro. I loaded the audio driver for Windows 7 64 bit, but that did not make any difference. The Device Manager indicates that "This device cannot start (Code 10)" Driver Date 7/9/2015 / Version - 10.0.10240.16384 / Microsoft Driver Details Tab - Value = High Definition Audio Device From the Events Tab - (Information)Device HDAUDIO\FUNC_01&VEN_8086&DEV_2804&SUBSYS_80860101&REV_1000\4&36c4990c&0&0301 requires further installation. Any guidance is greatly appreciated.

Hi The problem HD audio device you are seeing is the Intel HDMI audio device that needs a driver. I looked around for a W10 driver for the hardware ID you posted, and can't find one. You don't need that device unless you want/need audio through the display port. The only suggestion I can offer would be to try the W7 Intel graphics driver from your notebook's support and driver page, but install it this way...so that you just target the problem audio device... Download, but don't run this graphics driver... http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=4095873&swItemId=ob_127914_1&swEnvOid=4059 Download and install this free file utility. 64 bit is the second file listed. http://www.7-zip.org/ After you install 7-zip, right click on the graphics driver file you downloaded, and select 7-zip from the list of items. Have 7-Zip Extract to: and let it extract the driver to the folder name (sp64360). Go to the device manager and click on the problem Intel HD audio device needing the driver. Click on the driver tab. Click on Update Driver. Select the Browse my computer for driver software option, and browse to the driver folder 7-Zip created. Make sure the Include Subfolders box is checked, and see if the driver installs that way. Then reboot. If you explore the driver folder 7-zip created, and open the DisplayAudio folder, you will find the setup information file that has the hardware ID you posted as supported by the driver. Whether or not this audio driver will work on W10, that I do not know. But if you want to give that a try, that would be a way to do it without messing with the actual graphics driver.

Apple External Optical Disk Drive cannot start

Installed Win7 64-bit on a 2010 Mac Mini. I plugged in the MacBook Air external optical drive. It accepts a CD, spins up, but doesn't report the drive in Windows Explorer. Device manager shows a error: The device cannot start (Code 10). Aside from this, all other peripherals seem to be working fine.
I was told at the Apple store that this drive was compatible with the Mac Mini. Any ideas on how to resolve this issue or should I simply return the external drive?
Thanks.

This is fixed in Bootcamp 3.2, just released. Optical disk works properly.

Moved my library to an external hard drive. Now I get this message when trying to import video: Cannot start ingest because there is no storage location set. Please set one under Storage in Preferences and try again.

I recently moved my iMovie Library and all of its contents to an external hard drive. I then erased the library and all of its contents from my iMac HD and created a new library. Now when I try to import video from my DV camera I get this message: Cannot start ingest because there is no storage location set. Please set one under Storage in Preferences and try again. There is no way to set a storage location in Preferences. I have chosen an Event in the middle drop down box. But it still will not import. Any help will be greatly appreciated.

My iTunes library is set up the way I said in the top post and works totally fine.
Yes, and that is the default structure to which I was referring. iTunes will organize it that way automatically unless people do start changing settings (in which case they should know what they are doing and how iTunes works with library files and media structure.)
Both ways work, the advantages of mine would be that should iTunes try looking fo a library, it will always be in the default location.
It makes people think they have to change media location in preferences. They do not unless they want to relocate media only and leave other things on their internal drive (in which case there is no point in copying library files to the external, and you certainly wouldn't want to then delete them from your internal).
Downside is that then should someone move their iTunes library to anther computer they need to remember to get those library files on the external hard drive.
Just copy the whole iTunes folder and it will get the library files to the other drive in one step, along with all the other files.
Your post has good stuff but it makes a move appear intimidating and look like people have to do a lot of organizing to move the collection. It also throws in extra steps (namely altering preference settings) that could cause confusion or even make a mess of things. If people leave iTunes to default preference settings (which most people do) the move summarizes into a short line: Copy a folder and hold an extra button the next time you start iTunes.
Note that the instructions in the link I provided earlier do also include many steps, but those are to ensure that everybody does have it all organized correctly before simply copying the iTunes folder. In the end it is just a simple action.

Bootcamp bluetooth driver issue ("This device cannot start. (Code 10)")

Hi everyone,
I have a problem (re)pairing my Apple mighty mouse with Windows 7 under Bootcamp.
Initially I had my mouse working through updating the driver to the one from Apple as is described on various forums.
After rebooting my laptop the mouse didn’t connect anymore. So I tried to repeat updating the driver to the apple one. But this time it didn’t work.
I then updated the Bootcamp drivers from the OSX installation disc.
Then, when I checked the hardware, it showed:
Apple Built-in Bluetooth
Microsoft Bluetooth Enumerator
Under these setting my computer still doesn’t detect my mouse under windows.
So I checked to see if I could update my drivers again. This time there were four instead of two:
Apple Broadcom Built-in Bluetooth version 3.1.0.1 [23-11-2009]
Apple Broadcom Built-in Bluetooth version 4.0.0.1 [27-4-2011]
Apple Built-in Bluetooth
Apple Built-in BluetoothDFU
First there were only the first two. Of these two, the first one worked for the first time I paired my mouse.
When I change the driver to any of the three other than the Apple Built-in Bluetooth, it says:
“Windows encountered a problem installing the driver software for your device” with this error:
“This device cannot start. (Code 10)"
After trying this, the initially set driver (Apple Built-in Bluetooth) gives the same error. Resulting in having to reinstall all the drivers all over again.
Anyone encountered the same problem or at least the error of “This device cannot start. (Code 10)"?
Thanks.

What kind of reinmstall did you perform? If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed. Your list will be different than the following one, but this is only an example.

U530 Touch - Audio DRIVER ERROR - This device cannot start (Code 10) - Windows 7

U530 - High definition audio device - ERROR - This device cannot start (Code 10) Windows 7, please see the picture
Picture link (hosted on photobucket.com)
I got all drivers up to date including the BIOS, everything is working fine (the sound works, microphone works...) but this error is kind of annoying to my eyes so if anyone know how to fix it please help.
I tried to uninstall this and let windows update install it again => not worked, same problem.
I tried to re-install the Realtek driver (uninstall - restart machine - install - restart machine) => same problem
And another probelm which has not been solved yet is the Bluetooth icon keep blinking on battery mode (windows 7), you can see more in this thread

What kind of reinmstall did you perform? If you used the recovery media, then this will be pretty simple. Boot to the recovewry media again and this time select the Reinstall drivers and applications option. Find the audio driver on the list of available drivers, put a tick in the box to its left and then click on the install button in the lower right hand corner of the window. The driver will be installed. Your list will be different than the following one, but this is only an example.

I have a big problem with Lion and PGP. After upgrading from snow leopard to lion I cannot access my PGP drive which was generated under snow leopard. PGP does not start but gives a notion that lion cannot work with my PGP version. Solution?

After upgrading from Snow Leopard to Lion I cannot access a PGP drive which was generated under snow leopard. PGP does not start. When I try to start I just receive a message that Lion cannot work with PGP. How can I now access important and confifential informatio which I have stored in PGP (snow leopard). Do I have to move back to snow leopard. If so, how can I do this?

If you have this product,
http://www.symantec.com/business/support/index?page=content&id=TECH165159
you have to go back to Snow Leopard.
To re-install SL, back up your home directory, format and re-install.

I had a system crash(with Vista).I cannot start up windows on that drive.I have Win 7 on a new drive.I can access the files on the old drive to copy them.I would like to know how to find and copy the bookmarks from Firefox on the old drive and copy to the

Hi:
I had a system crash and I cannot start windows (Vista)on it.I have a new drive running Win 7.How do I copy the files from the old drive's files to the new?The Bookmark files that is.
Thanks.Any help is appreciated.
Shaun

This could help.
http://support.mozilla.com/en-US/kb/Backing+up+your+information
Basically, you have to copy your profile from the old hdd to the new one.

DVD and CD-RW Drives "cannot start"

Upon upgrading to the new 7.5 iTunes, BOTH of my drives came up with an exclamation point. Clicking properties of each revealed the message "Device cannot start. (Code 10)
I had to call DELL to fix it and they went to the registry and deleted some settings. Then they uninstalled the drives and had me reboot.
This worked! But iTunes will not be able to burn CD's or DVD's. I can still use it for buying, listening, etc.
So...I thought I'd repair the iTunes installation. It did it AGAIN! So I had DELL fix it again.
I realized that with iTunes version 7.5, that I will not be able to use it until they (APPLE) come out with an update.
So until then, everytime I want to use iTunes, I get this message "The registry settings used by the iTunes drivers for importing and buring CDs and DVDs are missing. This can happen as a result of installing other CD burning softward. Please reinstall iTunes."
I won't be doing that until they fix it. Until then, I will use Windows Media Player for that.
I would love to have been able to tell this to someone at Apple, but they won't let you email them (and I didn't see a phone number either). This appears to be my only option.
Customer Service?

This fix will only get your cd and dvd drive working again. It will not get iTunes to work properly (you will still be able to buy music from them and play it, you just won't be able to burn cd's or dvd'd using iTunes. I suggest Windows Media Player.
Locate the CD/ DVD drive in the list and Remove Drive from Device manager. (Single right click and you get option to remove the drive in the list) Then Close Device Manager
Click the Start button, click Run
In the Open box, type Regedit, and then click OK.
Click the plus sign next to HKEYLOCALMACHINE.
Click the plus sign next to SYSTEM.
Click the plus sign next to Current Control Set.
Click the plus sign next to Control.
Click the plus sign next to Class.
Click {4D36E965-E325-11CE-BFC1-08002BE10318}.
on the right hand side of the window, click Upper Filters.
Click Edit on the menu bar.
Click Delete, and then click OK.
On the right-hand side of the window, click Lower Filters.
Click Edit on the menu bar.
Click Delete, and then click OK.
Click File, and then click Exit.
Do not restart the system.
Look for a drive letter in My Computer.
*Double-click My Computer.
* Check if the Drive is listed there.
Click on action. Choose the option scan for new hardware.
This, however, will not get iTunes to work properly, it will only get your cd and dvd drive functioning again.

No audio from HDMI output because High Definition Audio Driver cannot start (Envy 17 Quad)

Ever since I first bought this laptop two months ago, the audio from the HDMI output has always been inconsistent. I remember it working a couple times, but there were more times when my audio driver didn't recognize that an HDMI cable was plugged in. Yes, I tried all the obvious: shutting down computer, checking disabled devices in Playback Devices, reinstalling drivers, etc. Now, when I plug an HDMI cable in, the video comes out fine but the IDT High Definition Audio CODEC does not recognize HDMI/my TV. The High Definition Audio Driver says it cannot start, but I could not reinstall nor find a download from HP's website. How can I get audio through HDMI to my TV??
This question was solved.
View Solution.

Hi,
Please try:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?swItem=vc-107611-1&a...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I own PSE 7 on disc. The laptop it was loaded on died. My new laptop doesn't have an optical drive so I downloaded PSE 7 from the Adobe site. It downloaded fine but I cannot start using it until I enter a S/N. The S/N on the disc box doesn't work.

I own PSE 7 on disc. The laptop it was loaded on died. My new laptop doesn't have an optical drive so I downloaded PSE 7 from the Adobe site. It downloaded fine but I cannot start using it until I enter a S/N. The S/N on the disc box doesn't work.

Those links weren't particularly helpful to me. They convinced me to install the drivers for my USB 2.0 card, but that didn't make a difference. Still no OS X without a PRAM reset if I've dared to venture into OS 9.
It's always been my understanding that an unblessed System Folder will not be selectable in OS 9's Startup Disk control panel. My folders are blessed and healthy. Of course I'm running 9.2.2, as stated in my first message. I also frequently verify and repair my disks and permissions.
I did a verbose startup of OS X, and noticed something funny about "ATY...too old." Perhaps this problem is related? I ventured into my system.log file and there it was, repeated over and over, everytime I've booted this computer:
Aug 8 18:30:24 localhost kernel: From path: "/pci/@d/pci-ata@1/ata-4@0/disk@0:10,\mach_kernel", Waiting on <dict ID="0"><key>IOPathMatch</key><string ID="1">IODeviceTree:/pci/@d/pci-ata@1/ata-4@0/@0:10</string></dict>
Aug 8 18:30:35 localhost kernel: ROM ndrv for ATY,Rage128y is too old (0xb3383430)
Aug 8 18:30:41 localhost init: kernel security level changed from 0 to 1
Anyone know how to interpret that? Is it related to my problem? I googled it, and all I found was a web board of people arguing over whether the Apple installed stock ATI Rage video card that came in the G3's is appropriate for Panther. The Ye's have it as far as I'm concerned...as long as I leave OS 9 alone, my video is fine on this computer!
14" iBook G3 800, B&W PowerMac G3 350, Mac Classic II 16 :-P Mac OS X (10.3.9) System 7 Rocked!

Protege 2010 cannot start Slimline Combo drive

Similar Messages

Maybe you are looking for