Protocol Error: Unknown error. (1)
I have a Centro (sprint) which has been giving me lots of problems. i want to focus at 1 the issue now. I restored each database separately and it gave me the same error "protocol error: unknown error (1)" Then i back up with nothing checked off to transfer -meaning it's not a particular database giving me this issue AND I STILL GOT THE SAME ERROR. i used dbfixit to check everything and it's fine.
How do i get rid of this error.
Thanks
Sam
PS i backup my data (in addition the the computer) with RSCBACKUP which is amazing!
I have a Palm TX with the same error. Has anyone found a solution to the problem
Similar Messages
-
Hi,
I am using FM 'RH_START_EXCEL_WITH_DATA' to download data of an internal table to excel sheet.
I'm passing the filename, internal table as mentioned below:
CALL FUNCTION 'RH_START_EXCEL_WITH_DATA'
EXPORTING
DATA_FILENAME = v_xls_file
DATA_PATH_FLAG = 'W'
DATA_TABLE = i_test[].
But I am getting this following error:
System Error: unknown error when GUI_DOWNLOAD is called.
Thanks in advance.Hey Wincy , If you want to download Internal Table's data in to Excel just use the Method
cl_gui_frontend_services=>gui_download....
If you need any code assistance kindly Let me know. although the method is easy to use and Works fine. -
OAB in Outlook 2010 error "unknown error 0x8007007A" on download
Hi all.
We have an issue with OAB not downloading with error "unknown error 0x8007007A".
Autodiscovery test doesn't show any error and seems to be correct.
The only strange to me that I can't open OAB Url http://srv.domain.local/OAB/61555bea-e998-4edf-8eac-f919879e2950/ and have got 403 error (forbidden).
Also I've check the OAB folder on server and I have there a bunch of files.
We use Exchange 2010 and Outlook 2010.
What I should to do next to fix this error?We have been battling this same problem for a number of years. This only happens on cached mode clients. I've seen it happen with Outlook 2010 and 2013. We have Exchange 2007.
We can't go around and delete and recreate everyone's mail profile every day. Whats the real solution? The error description is "unknown" so I think that's why its so hard to pinpoint the cause. -
Adobe Flash Player 11 50% Install Error: Unknown Error.
I freshly installed Windows 7: Ultimate edition (32 bit) and It seemed I had no flash player so I went to go download the newest flash player and it goes through the proccess flawlessly until it hits 50% it fails and says "Error: Unknown Error" I tried Troubleshooting witch it sent me to but none of it works. I would really like some help with this problem within the week. Thank you!
Processor: Intel(R) Pentium 9E0 D CPU 2.80GHz 2.79GHz
Ram: 3.00 GB
32-bit Operating System: Windows 7 Ultimate
No flash whatsoever.
Firefox 11.0Just change the 64 to 32:
http://download.macromedia.com/pub/flashplayer/current/install_flash_player_32bit.exe
I was having the same problem, but the full installer worked for me. There's at least one other thread reporting the same thing. I guess there's something wrong with Adobe's servers tonight. -
CRS 5 Backups fail with this error: Unknown error occured while connecting to the host
Dear All,
We have backup issue with UCCX 5.0(2)SR03_Build317, while trying to take backup giving following error "Unknown error occurred while connecting to the host".
I have found the solution in the Cisco and tried all the suggestion, still not working and same error observed. Due to backup issue we unable to do any changes on the CRS, when we try to create new agents, those agents are not reflecting in the CRS.
Also I have observed bellow error , when try to re-sync the JTAPI,
Error while handling the input request.
Top of Form
Config Changes are not allowed during 'Backup' operation, which was started by 'Scheduler' at 'Fri Jun 08 18:00:03 GMT+08:00 2012 '. Please try again after 'Backup' is complete.
Bottom of Form
http://www.cisco.com/en/US/products/sw/custcosw/ps1846/products_tech_note09186a00809a752c.shtml
Solution
Complete these steps in order to resolve this issue:
•1. Access the UCCX server and navigate to Start > Run, and type CET.
•2. When the warning message appears, click NO.
•3. Choose com.cisco.crs.cluster.config.ArchiveAdminConfig.
•4. On the right side, double-click the record ID.
•5. Click the com.cisco.crs.cluster.config.ArchiveAdminConfig tab, and clear the password under Backup Storage.
•6. Click Apply.
•7. Navigate to Appadmin > Tools > Backup and Restore.
•8. Under Backup Storage Location, type the new password, and click Update.
After you complete these steps, you can run the backup. If the backup fails, restart the server, and try the backup again. If the backup still fails, you can navigate to CET, clear all the fields, and then type the new information for the storage location.
Please help me with your suggestions.
Thanks & Regards,
Naveen .SPlease any one help me on this issue..
-
Everything was fine, I try to update to latest iOS firmware (4.3.5) and I get an error "Unknown error occured (1394)" What do I do now?
Can anyone help me?
BobbyError 3194, AKA "This device is not eligible.. occurs for several reasons:
1. Update to the latest iTunes - currently 10.4.1.
2. Disable ALL security apps (firewall, antivirus/spyware) running on your computer. Additional measures may be needed.
3. You may need to edit the Hosts file on your computer to remove references to gs.apple.com if you EVER used hacking techniqus or apps such as tinyumbrella.
4. Don't try to downgrade the iOS.
5. If the phone was EVER successfully hacked in the past (jailbreak, downgrade, unauthourized unlock) there may be nothing you can do now to fix this.
"This device is not eligible for the requested build: Also sometimes displayed as an error 3194. If you receive this error, update to the latest version of iTunes. 3rd party security software or router security settings can also cause this issue, to resolve please follow Troubleshooting security software issues. Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod; follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. Also, using an older or modified .ipsw file can cause this error. Try restoring moving the current .ipsw file aside, or try restoring in a new user to ensure that iTunes downloads a new .ipsw."
http://support.apple.com/kb/TS3694 -
Hi Everyone,
Please provide me a solution for this.
One of the users is encountering the above issue when he connects the Smartview templates, we have implemented the steps in which specified as per "Hyperion Financial Management for SmartView Error "Unknown Error in HFMProviderData at the root level is invalid. Line 1, position 1" (Doc ID 1361427.1)"
but unfortunately still the same user facing with same error when he tries to connect HFM app over template and after implemeted the steps as per above Oracle Doc ID, there is no "UserMbrSel" USERPARAMS existing on checks at HFM schema level.
Quick response much appriciated and Many thanks in advance.
Regards
KKHi KK,
You may want to review below archived discussions regarding the same issue:
https://community.oracle.com/message/10287197
https://community.oracle.com/message/9701674
~ KK -
"Publishing Error" Unknown error occured.
I have just recently published a small club website. Plenty of photos.
I have tried to publish a new blog page, but have been told that there is a publishing error - Unknown error occured.
I checked my idisk and there is plenty of free space.
Is there a limit of uploads in a certain period?To answer my own question
Install the latest version of iWeb and it works fine.
Moral of this story...
Upgrade whenever possible. -
Updated to Premiere CC 2014, now I can't export. Error - unknown error.
Hello -
I recently updated my Premiere Pro to the 2014 version. I opened my project in the new 2014 release and kept editing, but now when I want to export I can't. It fails every time at the beginning of the export and then gives me "Error - unknown error"
I've tried copying the sequence into a new sequence AND a new project. I've tried exporting with all different settings, to no avail. I have cleared the media cache and the preview files just in case. Cannot fix this! Need to export for a client so any help would be appreciated.
Basic doc-style sequence - some AE comps for Titles, some images with the ken burns effect, and 2 video tracks. Shot 720p and trying to export for 720p.
help!
ThanksHi,
Does this error come up as soon as you start the export procedure.
Did you try to export it through the Media Encoder?
Thank You
Arjun -
Every time I try and update mu devices from my itunes account I get an error unknown error 9006
every time I try and update mu devices from my itunes account I get an error unknown error 9006
Hey burtonpg,
Thanks for the question. If you are receiving a 9006 error when attempting to update or restore your devices in iTunes, this usually means that there is a conflict with security software on your system:
Resolve specific iTunes update and restore errors
http://support.apple.com/kb/TS3694
Configure your security software
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.
Common errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Thanks,
Matt M. -
FM CCARD_ENVELOPE SSF Error: Unknown error in external security prod
Hi all,
Im still new in SAP. I am trying to run function module CCARD_ENVELOPE to encrypt a credit card number in tcode se37. After i input the credit card number and run it,it shows me an error ENVELOPE_FAILED, Error when encrypting payment card data: SSF error: Unknown error in external security prod. Can anyone tell me more about this problem.?I think this cannot be executed in SE37.
Go to SE24 and paste this class->method - CMD_EI_API_CHECK, hit enter and go to method GET_ENCRYPT_CREDIT_CARD.
The above class-method should help you for your original requirement.
-Veer
Edited by: veerendranath Maddula on Sep 17, 2011 4:58 AM -
Save/Load Error "Unknown Error" while converting VI to Template VI
Hi,
I am trying to convert LabVIEW 8.0 VI to Template VI. If I change the file extention (Windows) from *.vi to *.vit, then icon is changing but while loading the template from LabVIEW 8.0 it tells Save/Load Error "Unknown Error". I tried mass compiling the VI's but no change. I tryed LabVIEW Save As options to save VI as Template VI.No Use. Then I created one Blank Template VI then copyed the contents from VI to Template VI. If I am reopening the Template again it tells the same error.
I assumed I can use all LabVIEW functions inside Template VI. (There is no difference between VI and Template VI). If this this assumption is wrong please let me know about the limitations in using Template VI's
Please let me know what procedure I should follow to convert VI to Template in LV 8.0
Thanks,
S.VenkatakrishnaHello,
Thank you for posting to the NI discussion forums. Everything you tried should work, and does
with my copy of LabVIEW 8. I created a
VI, saved it as a .vi, renamed it to .vit, and even did “save as..” and changed
the extension there to be a vit. Have
you tried these things with a different VI – say, just a VI with a while loop
and a stop button? Is this error
accompanied by any other .cpp error messages?
We have seen situations like this where this error dialogue comes up,
and it’s usually a result of some sort of VI corruption. If possible you might want to post the VI
here too, and I can see if I can convert it for you. I’m happy to help, please let me know if
anything here helps, or if you have any additional information on this problem.
Travis M
LabVIEW R&D
National Instruments -
PPro 1.5 Exporting Error: Unknown Error
I've been trying to export a 32 minute video through media encoder to make a DVD in Encore. However I've been having "Export Error: Unknown Error" pop up when the file is 100% complete. I've tried shutting my computer right down (not restarting but turned off), exporting the video as an avi and then reimporting it into both another sequence and an all-new session, but I still get the Unknown Error when I export. Any ideas as too how to resolve this issue?
Some of this is about other Adobe products, but worth a read
As well as the below, right click the Encore icon and select Run as Administrator, which is NOT the same thing as running the computer with the Administrator account, and which fixes several "odd" problems... To create a two layer DVD (or a BluRay?), you MUST have Encore set to use the Run as Administrator option
Run as Administrator http://forums.adobe.com/thread/969395
-and Vista http://forums.adobe.com/thread/1021721
Odd Errors http://forums.adobe.com/thread/670174
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 http://forums.adobe.com/thread/666558
And This Message Thread http://forums.adobe.com/thread/665641
>exporting the video as an avi and then reimporting it
Wait... you ARE able to complete an export to AVI without error?
Why do you not load that AVI file into Encore for authoring? -
400,101004 error "unknown error" - some kind of login issue
I'm getting a 400,101004 error - "Unknown error" It is of course a known error that has to do with my login account. This has happened to me before but I don't remember how to fix it.
John HeckmanHi,
Please try de-activating and re-activating Muse from the Help menu and re-launch (follow the onscreen prompts).
Let me know if that works or not -
Conduit HanDBase 4' Error: unknown error. (65535)
Hi, I just downloaded the latest version 4.1 of HanDbase and when I hot sync'd it I got this in the log. Can you tell me what I need to do if anything to fix this?
Thanks,
radtech1
HotSync session started on 02/23/09 12:29:42, and completed in 25.0 seconds
Installed all files successfully
Duration: 6.4 seconds
Successfully installed 2 file(s)
HanDBase3.PRC
HBForms.PRC
Date Book synchronized successfully
Duration: 0.9 seconds
Address Book synchronized successfully
Duration: 1.5 seconds
To Do List synchronized successfully
Duration: 0.8 seconds
Memo Pad synchronized successfully
Duration: 0.8 seconds
Media synchronized successfully
Duration: 5.8 seconds
Conduit 'HanDBase 4' Error: Unknown error. (65535)
Post relates to: Palm TX
Post relates to: Palm TXIf I understand what you are saying, then yes. but I only know about the PDB files because those are the ones I send to my instructor each week and she extracts the data from them, somehow. I did this once before when I lost my password and user name and could not figure out how to gain access to anything on my TX at all nor how to retrieve my user name and password that worked,So I then did the hard reset and I think I renamed the backup folder. So for a while I had two different databases one for the old name and one for the new name. I THINK I got that taken care of as everything with the old name has been archived or deleted. Would this possibly be the reason for the error? When I do the hard reset, 1. Where are the instructions on how to do this again? Can I find them on the Palm user guide? I cant remember where I found. And, 2. I should have the instructions on how to rename the folder on the palm user guide is that correct? and did you mean rename the "backup folder" instead of backfolder?
Post relates to: Palm TX
Maybe you are looking for
-
How to connect a late 2008 macbook pro to hd tv
I have a late 2008 Macbook Pro and want to connect it to my HD TV what cables do I need ?
-
Regarding the profit center in sales order.
Hi guys, Actually I am from abap. I got one user exit related to profit center. Plz help me. My problem is while doing intercompany sales, the profit center will be changed to selling sales organiztion's profit center. but i need the buying sales or
-
XServer providers no longer available to normal users in S11
I haven't yet found a means of accessing Solaris 11's XServer probes as a normal user. My user has all dtrace privileges (dtrace_user,dtrace_proc,dtrace_kernel), but dtrace -l -n 'Xserver*' gives: pfexec dtrace -l -n 'Xserver*' ID PROVIDER MODULE FUN
-
Google Map Marker Pin at Incorrect Location
Hi Can anyone help regarding why a Google map marker is located off the coast of Africa when I have included the app item location/address details as being in Queensland, Australia? It only comes up when a full search is done, when you click the Get
-
How to clean install/upgrade from9.1/9.2.2 to Panther and make HD space
Dear group, After reading many posts looking for answers to my iMac problems, I've decided to make a post. I've an iMac from the 500 series (which came with 128Mb, 20GB HD and 500MHZ and a slot for cd's) which I bought in 2001. From the start I prefe