Protocol for the Gsm Mobile Modems

Hi all,
Can some one tell me about the protocol used to communicate from a PDA or lap top to an http server throug a Gsm mobile phone as the modem ( The mobile and the PDA are connected via bluetooth ) .
actually i want to have an http connection from the PDA using Java .The PDA does not have an access to the internet. It is connected to a Mobile Phone via bluetooth for the internet acess . My question is how i should send the data from my PDA client to the server as it is to deal with http protocol and bluetooth protocol ?
Anything is appreciated
Vishin Das V

This is a link to the Concept Simulator
http://www.forum.nokia.com/info/sw.nokia.com/id/f26208e1-30c5-46cf-af94-fcbec0e6c175/Nokia_Audio_Suite.html
This software simulates the Nokia 12i GSM module.
Aplicom have taken over this product from Nokia. http://www.aplicom.com/
Ive never used this simulator before, so good luck :-)

Similar Messages

  • N97: making voip calls via the GSM mobile

    Hi All;
    I am facing a problem that my Nokia N97 that is working with VoIP (via the SIP), is only working if I am using my wireless internet in the home (via the access point), but when I try to do the call using my GSM internet service provider (we call it EGO and in some countries it is GPRS).
    Some other mobile, they support VoIP using the wireless access point or the internet via the GSM (mobile) service provider ...
    So how can I fix this issue on my N97?
    Regards
    Bilal

    I have the same problem: I can make and receive calls using my router but not through GPRS allthough i did set AWCDMA' and 'UAWMAC' to ON

  • Drivers for the Apple External Modem in 10.5

    Hi all! I recently upgraded my system with Leopard. All seems to be great save for the fact I can't use the external Apple USB modem attached to my Macbook Pro. While I don't fax that much I do sometimes have to use it to receive faxes and such from others. Is there a driver update for this for Leopard? Thanks to all in advance for the help!
    Lance

    The drivers for the Apple USB Modem are already installed along with Leopard..... I'm not sure why its not working.
    Try opening up System Preferences - Network, and see if it shows up/if its enabled.
    Other than that, I don't see why you should have any problems.

  • Do you know a unicast protocol for the Ethernet control plane?

    Hi,
    Does anyone know a protocol for the Ethernet control plane which has a unicast destination address?
    MVRP, MMRP, MSTP, RSTP, all these protocols have a multicast reserved destination address.
    Perhaps we have to look non-802.1Q control plane protocols.
    Best regards,
    Michel

    Hi Peter,
    > I wonder if any of the OAM protocols, especially the one providing the loopback/ping test is unicast-based.
    In G.8013 (07/2011) section 7.3:
    "The Ethernet loopback function (ETH-LB) is used to verify connectivity of a MEP with a MIP or
    peer MEP(s). There are two ETH-LB types:
    • Unicast ETH-LB.
    • Multicast ETH-LB".
    > In any case, think of LOOP frames sent by Catalyst switches to detect  self-looped ports. In these frames,
    > the source and destination MAC  address are set to the unicast MAC of the egress port.
    As I said above, it's a good case for my little study.
    The LOOP frame, from Cisco, was certainly interesting and important before 2004.
    Since 802.3ah-2004 we have the OAM remote loopback (in link OAM, and not network OAM as ETH-LB).
    Best regards,
    Michel

  • Drivers for the Westell 6100 modem for my DSL?

    Does anyone know where I can get the proper driver for my 6100 Westell modem?  I have a yellow question mark in my device manager and i keep getting a no driver found for ethernet connection message.

    If you are using ethernet, no drivers for the modem are needed.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Trying to attach my time capsule to my cable modem box, which is a Virgin media Scientific Atlanta box. Problem is the apple set up tells my to put in the IP address for the virgin cable modem, which I cannot find. Can any on assist?

    can any one help with is problem.

    In what screen of what application are you asked to enter that IP address?  The only place I'd expect to see such a prompt is to let AirPort Utility access another AirPort base station.  Your Scientific Atlanta box isn't one.
    By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject.  In the future just type a short summary of your post into that field and type the whole message into the field below that.

  • Where to download the android APK for the byDesign mobile app.

    I need the apk to install it on my Blackberry Z30. where can I dowbnload the apk ?
    Thanks for any hints.

    Hi Marcus,
    At least for CFTE solution the Blackberry Z30 is not clearly described as supported. Please look into “3.2.5 Mobile Apps Operating Systems” section in the Master Guide:
    https://websmp106.sap-ag.de/~sapidb/011000358700000299502014E/MG_ODT_110_FINAL.pdf
    For ByD solution I found this document. Please look into “7.2 Mobile Apps” section. Here the Z30 is not described as supported as well – only Curve and Bold devices:
    http://help.sap.com/saphelp_byd1405/en/ktp/Products/96e54f70e7b2450895d71966b531edf7/Publishing/Guides/SecurityGuide.pdf
    It might explain why you don’t have all features available in Z30.
    Regards,
    Cristiano Rosa

  • HT6030 Does OS X 10.9 use Exchange ActiveSync protocol for the built-in Mail client?

    Anyone knows ?

    Quit Mail. Force quit if necessary.
    Back up all data. That means you know you can restore the Mail database, no matter what happens.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Mail/V2/MailData
    Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
    Go ▹ Go to Folder
    from the menu bar. Paste into the box that opens (command-V), then press return.
    A folder window will open. Inside it there should be files with names as follows:
    Envelope Index
    ExternalUpdates.storedata
    Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
    Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Warning: The process may take hours if you have gigantic mailboxes. For reasonable-sized mailboxes, it should only take a few minutes.
    Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

  • What is the protocol for the optical drive error?

    What is going on with the iMac optical drive for CD/DVD content.  This ***** - nothing will work and I am trying to install new software onto my iMac for taxes and gaming.  HELP!!!

    Hi !
    I think this link contains information needed :
    http://wikis.sun.com/display/EM11gOC1/Network+Port+Requirements+and+Protocols

  • Wireless Protocols for the AirPort Extreme

    Hi guys,
    Is the airport extreme fully 802.11n certified or a draft 2.0 version? The website doesn't have any indications of any 'Wi-Fi CERTIFIED multi-stream n' logos?!
    TIA!

    Anyone?

  • Adobe for the T-Mobile G1

    Hi I have the T-Mobiel G1 phone and I cannot down load the Adobe flash player onto it.  can any one help with this please.
    Phil

    i meet the same problem! but my phone is C6 (WINDOWS 6.1), i bought it from www.eshopbing.com Monday, is this the same with G1????

  • Is this part # 661-2587 the one for the v.92 internal modem??

    I know that this modem will fit right into my AGP G4, but I need to know if this is the part number for the V.92 modem. I won't make the upgrade unless I know it is the newer protocol. Any help is greatly appreciated. Thanks in advance.

    According to the Manual I have that part number was used in the MDD's 2003, so I would say yes its a v.92, and thats according to my system profiler.

  • Is Firefox Mobile available for the HTC Tilt 2?

    I've noticed for the Firefox Mobile that it has a list of HTC devices. I have a HTC Tilt 2 (AT&T - Windows Phone) that runs on HTC Sense. Would it run on this?

    Sorry, we are no longer developing Firefox for Windows Mobile (or Windows Phone). For more information, see [[Will Firefox work on my phone?]]

  • What is the best dsl modem to use with the Airport Extreme for AT

    I'm looking for the best dsl modem to use with AT&T service. I'm not really interested in their equipment. I have the newest model of the AE.
    Thanks

    I'm looking for the best dsl modem to use with AT&T service
    I have no idea if the Motorola 2210 is the "best" device to use, but it has been flawless in 5+ years of operation.
    I believe that there is a new version of the is product, now called the 3360. I normally switch modems after about 5 years of use and will use the 3360 in the near future.
    This support article from AT&T provides some valuable information about how to configure a router using a modem:
    http://www.att.com/esupport/article.jsp?sid=KB401764&cv=801,902&title=Connecting +a+non-AT%26T+provided+router+to+your+AT%26T+Internet+connection#fbid=psQd4wvHtu P

  • Oracle Fusion Middleware Java API Reference for Oracle ADF Mobile

    Where can I find "Oracle Fusion Middleware Java API Reference for Oracle ADF Mobile"?
    Thanks a lot for your time.

    Hi, this is referring to the JavaDocs for Java methods/classes supported by ADF Mobile. You can typically right (or ctrl) click on any ADF Mobile specific Java method and select "JavaDoc". You can open up a sample app that contains any Java class - for example the HR sample app, and find any method with name "adfmf*". You should be able to see the Java doc for the ADF Mobile related methods/classes.
    Thanks,
    Joe Huang

Maybe you are looking for