Protocol maintenance -OAA3

Hi All,
I am integrating a 3rd party content server with SAP.
I have done following steps:
OAC0 u2013 customizing Content Repositories
OAC2 u2013 SAP AL Documenttypes global
OAC3 u2013 SAP AL Link Table
I have created links in the SAP table TOA01.
Logic will be like this: First i will search doc in tcode OAAD and then i will click on the link. It should call to viewer of the storage system supplier (means our viwer )
I am stuck in protocol maintenace step (OAA3-SAP AL Protocols for OLE Front-End).
Please help me to configure this step.Provide me any link or any step by step document .
Thanks
sandeep sharma
Edited by: sandeep sharma on Nov 17, 2010 12:25 PM

solved myself

Similar Messages

Archivelink setup

Hello,
In our company we archive scanned documents in IXOS.
The archivelink is setup to store the documents in IXOS and to view the archived documents with the IXOS viewer.
Now we want to create a new content repository for which we want to store documents on a file server instead of using IXOS.
Is there someone who knows how to set this up ?
I know that you need to create a new protocol via OAA3 and new application via OAA4 but how should this be configured.
We want to store all kind of document classes : FAX, PDF, TIF, DOC, XLS, ...
I would appreciate any help !
wkr,
Andy

Hello,
I will face the same problem in September. Sorry, I have no solution at moment. I will be please to share your experience in the next months. In my company we are evaluating to move from IXOS to SAP Content Server. Is the same Scenario you are facing?
I'm collenting advantages and disadvantages. Can you help me to find some documetation on this subject?
Thank you! Fabio

MOP RC (Maintenance Operation Protocol -Remote Console) function enabled

So I just had a white hat security finding on my external router. I appeared to be low in the findings and I am unsure if this protocol is even used any more. My router is a Cisco 3825 running IOS 12.3(11r)T2. This is what they reported:
One or more Cisco routers have the MOP RC (Maintenance Operation Protocol -Remote Console) function enabled, which is a poor security practice. MOP enables personnel on the local network, or a remote network that is bridged to the local network, to obtain access to a remote console on the router if they possess credentials for the device. This is significant because access to router management is usually protected by IP-based ACLs. As a Layer 2 protocol, MOP allows for the circumvention of this type of ACL, making brute force login attempts possible if account lockout is not enabled. If account lockout is enabled, such attempts could result in a denial of service due to user accounts being locked out.
I fixing this as easy as just running the no mop enabled command in the interface like this article suggests? http://blogs.cisco.com/security/router_spring_cleaning_-_no_mop_required/

ya it was a great easy to read article on a feature you should turn off. Still I wonder how many master hackers try to hack that. DECnet who knew right
Do you apply no mop enable the interface or the subinterface?? Also I should only need to apply it to the interface facing the "internet" right?

LMS 4.2 and Maintenance Operation Protocol

Dear All,
We are running LMS 4.2.1 and it is reporting a vulnerability stating that MOP is enabled on Cisco 7206 Router. However I am not able to apply the suggested fix "NO MOP ENABLED" on all ethernet interfaces. Router model and IOS running on the device is mentioned below,
ROUTER: Cisco 7206 NPE-G1
IOS: c7200-ik9o3s-mz.124-25f.bin
"show process | include MOP" and/or "show subsys name mop*" doesn't show anything in theoutput. Which means the MOP code is not part of the IOS.
If MOP code is not a part of the IOS, then why is LMS reporting mentioned vulnerability? Please clarify.
I am able to apply the same command in the Router running with the following,
IOS: c7200p-advsecurityk9-mz.150-1.m8.bin
Warm Regards,
Rajkumar G

any idea ?
Sent from Cisco Technical Support iPhone App

B-channel oos and protocol error 510

Dear all,
I have some some issue couple of days ago. The telephony system of my client worked well and suddenly the cannot make external calls via E1. I checked the config and for me it seems to be ok. When I checked the SDL file, I can see the B channel out of service error message following by the
"MGCP PROTOCOL ERROR: <S1/SU1/DS1-0/[email protected]> CRCX error code: 510". They have A CUCM 6.0 and Cisco 2821 as gateway with 12.4 (25f) advance IP service IOS.
I perform the following actions without success:
-From the CUCM in the advance service I forced the Bchannel to bring it in service,
- no mgcp/mgcp, -reboot the CUCM and the Gateway,
-reset the controller throug CUCM,... in vain.
They contacted telco and has confirm that everything seems to be ok. Find below the information that can help you to undestand better
#sh run brief
Building configuration...
Current configuration : 4859 bytes
version 12.4
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname ATD-CCM-GW
boot-start-marker
boot-end-marker
security authentication failure rate 3 log
security passwords min-length 6
logging buffered 51200 debugging
aaa new-model
aaa authentication login default local
aaa authentication login local_authen local
aaa authorization exec default local
aaa authorization exec local_author local
aaa session-id common
clock timezone A 1
network-clock-participate slot 1
network-clock-select 1 E1 1/1/0
ip cef
ip domain name xx.xxxx.xxx
ip host ATD-CCM1 10.10.10.100
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
isdn switch-type primary-net5
isdn logging
voice-card 0
dspfarm
dsp services dspfarm
voice-card 1
no dspfarm
no voice call carrier capacity active
voice rtp send-recv
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729br8 bytes 40
voice class h323 1
h225 timeout tcp establish 3
crypto pki trustpoint TP-self-signed-635937996
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-635937996
revocation-check none
rsakeypair TP-self-signed-635937996
crypto pki certificate chain TP-self-signed-635937996
certificate self-signed 01
application
service alternate Default
controller E1 1/1/0
framing NO-CRC4
pri-group timeslots 1-31 service mgcp
interface GigabitEthernet0/0
description to_CCM
ip address 10.10.10.254 255.255.255.0
duplex auto
speed auto
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface Serial1/1/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-net5
isdn overlap-receiving
isdn incoming-voice voice
isdn bind-l3 ccm-manager
isdn bchan-number-order ascending
isdn sending-complete
no cdp enable
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 10.10..253
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
logging trap debugging
control-plane
voice-port 1/0/0
timing hookflash-out 50
voice-port 1/0/1
signal groundStart
timing hookflash-out 50
voice-port 1/0/2
signal groundStart
timing hookflash-out 50
voice-port 1/0/3
signal groundStart
timing hookflash-out 50
voice-port 1/1/0:15
ccm-manager fallback-mgcp
ccm-manager mgcp
no ccm-manager fax protocol cisco
ccm-manager music-on-hold
ccm-manager config server ATD-CCM1
ccm-manager config
mgcp
mgcp call-agent 10.10.10.100 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp modem passthrough voip redundancy
mgcp package-capability rtp-package
mgcp package-capability sst-package
mgcp package-capability pre-package
mgcp default-package fxr-package
no mgcp package-capability res-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
no mgcp explicit hookstate
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface GigabitEthernet0/0
mgcp bind media source-interface GigabitEthernet0/0
mgcp profile default
dial-peer voice 999101 pots
service mgcpapp
port 1/0/1
forward-digits all
dial-peer voice 999102 pots
service mgcpapp
port 1/0/2
forward-digits all
dial-peer voice 999103 pots
service mgcpapp
port 1/0/3
forward-digits all
dial-peer voice 1 pots
service mgcpapp
incoming called-number .
direct-inward-dial
port 1/1/0:15
forward-digits all
dial-peer voice 999100 pots
service mgcpapp
port 1/0/0
gateway
timer receive-rtp 1200
scheduler allocate 20000 1000
ntp clock-period 17180351
ntp update-calendar
ntp server 10.10.10.9 source GigabitEthernet0/0
end
#sh controller e1
E1 1/1/0 is up.
Applique type is Channelized E1 - balanced
No alarms detected.
alarm-trigger is not set
Version info Firmware: 20090113, FPGA: 20, spm_count = 0
Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line.
 Current port master clock:recovered from backplane
Data in current interval (225 seconds elapsed):
 0 Line Code Violations, 0 Path Code Violations
 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 3 15 minute intervals):
 0 Line Code Violations, 0 Path Code Violations,
 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins,
 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
#sh ccm-manager
MGCP Domain Name: ATD-CCM-GW.xx.xxxx.xxx
Priority Status Host
============================================================
Primary Registered 10.10.10.100
First Backup None
Second Backup None
Current active Call Manager: 10.10.10.100
Backhaul/Redundant link port: 2428
Failover Interval: 30 seconds
Keepalive Interval: 15 seconds
Last keepalive sent: 15:31:24 UTC Oct 19 2012 (elapsed time: 00:00:09)
Last MGCP traffic time: 15:31:24 UTC Oct 19 2012 (elapsed time: 00:00:09)
Last failover time: None
Last switchback time: None
Switchback mode: Graceful
MGCP Fallback mode: Enabled/OFF
Last MGCP Fallback start time: None
Last MGCP Fallback end time: None
MGCP Download Tones: Disabled
TFTP retry count to shut Ports: 2
Backhaul Link info:
 Link Protocol: TCP
 Remote Port Number: 2428
 Remote IP Address: 10.10.10.100
 Current Link State: OPEN
 Statistics:
 Packets recvd: 11
 Recv failures: 0
 Packets xmitted: 18
 Xmit failures: 0
 PRI Ports being backhauled:
 Slot 1, VIC 1, port 0
Configuration Auto-Download Information
=======================================
Current version-id: 1350042385-8bfc9ed0-f85e-4435-8baf-3ad1ceefb55c
Last config-downloaded:00:00:00
Current state: Waiting for commands
Configuration Download statistics:
 Download Attempted : 1
 Download Successful : 1
 Download Failed : 0
 TFTP Download Failed : 0
 Configuration Attempted : 1
 Configuration Successful : 1
 Configuration Failed(Parsing): 0
 Configuration Failed(config) : 0
Last config download command: New Registration
Configuration Error History:
controller E1 1/1/0
no pri-group timeslots 1-31
FAX mode: disable
#debug isdn q931
#debug mgcp packet
009112: Oct 20 12:48:50.374: MGCP Packet received from 10.10.10.100:2427--->
CRCX 2359 S1/SU1/DS1-0/[email protected] MGCP 0.1
C: D000000001fbf9aa000000F500000001
X: 1f
L: p:20, a:PCMU, s:off, t:00
M: recvonly
R: D/[0-9ABCD*#]
Q: process,loop
<---
009113: Oct 20 12:48:50.382: MGCP Packet sent to 10.10.10.100:2427--->
200 2359 OK
I: 8
v=0
c=IN IP4 10.10.10.254
m=audio 18274 RTP/AVP 0 100
a=rtpmap:100 X-NSE/8000
a=fmtp:100 192-194
<---
009114: Oct 20 12:48:50.386: ISDN Se1/1/0:15 Q931d: srl_send_l3_pak:
source_id = CCM MANAGER 0x0003, dest_id = Q.921 0x0000, prim = DL_DATA_REQ 0x0240
priv_len = 4 int_id = 0x4636A628 datasize = 64
009115: Oct 20 12:48:50.386: ISDN Se1/1/0:15 Q931d: data =
009116: Oct 20 12:48:50.386: 4636A628000000030240043800010000
009117: Oct 20 12:48:50.386: 0802000105A104038090A31803A9839F
009118: Oct 20 12:48:50.386: 280B526F6C616E64202D2049546C0601
009119: Oct 20 12:48:50.386: 81313232307009803636393332313933
009120: Oct 20 12:48:50.386:
009121: Oct 20 12:48:50.434: MGCP Packet received from 10.10.10.100:2427--->
MDCX 2360 S1/SU1/DS1-0/[email protected] MGCP 0.1
C: D000000001fbf9aa000000F500000001
I: 8
X: 1f
L: p:20, a:PCMU, s:off, t:b8, fxr/fx:t38
M: recvonly
R: D/[0-9ABCD*#]
Q: process,loop
<---
009122: Oct 20 12:48:50.438: MGCP Packet sent to 10.10.10.100:2427--->
510 2360 fx: setting cannot be supported
<---
009123: Oct 20 12:48:50.438: ISDN Se1/1/0:15 Q931d: srl_send_l3_pak:
source_id = CCM MANAGER 0x0003, dest_id = Q.921 0x0000, prim = DL_DATA_REQ 0x0240
priv_len = 4 int_id = 0x4636A628 datasize = 25
009124: Oct 20 12:48:50.438: ISDN Se1/1/0:15 Q931d: data =
009125: Oct 20 12:48:50.438: 4636A628000000030240043800010000
009126: Oct 20 12:48:50.438: 0802000145080280AF
009127: Oct 20 12:48:50.462: MGCP Packet received from 10.10.10.100:2427--->
DLCX 2361 S1/SU1/DS1-0/[email protected] MGCP 0.1
C: D000000001fbf9aa000000F500000001
I: 8
X: 1f
S:
<---
ATD-CCM-GW#
009128: Oct 20 12:48:50.478: MGCP Packet sent to 10.10.10.100:2427--->
250 2361 OK
P: PS=0, OS=0, PR=0, OR=0, PL=0, JI=0, LA=0
<---
009129: Oct 20 12:48:50.478: ISDN Se1/1/0:15 Q931d: srl_send_l3_pak:
source_id = CCM MANAGER 0x0003, dest_id = Q.921 0x0000, prim = DL_DATA_REQ 0x0240
priv_len = 4 int_id = 0x4636A628 datasize = 21
009130: Oct 20 12:48:50.478: ISDN Se1/1/0:15 Q931d: data =
009131: Oct 20 12:48:50.478: 4636A628000000030240043800010000
009132: Oct 20 12:48:50.478: 080200015A
ATD-CCM-GW#
009133: Oct 20 12:49:03.002: MGCP Packet received from 10.10.10.100:2427--->
CRCX 2362 S1/SU1/DS1-0/[email protected] MGCP 0.1
C: D000000001fbf9ac000000F500000002
X: 1e
L: p:20, a:PCMU, s:off, t:b8, fxr/fx:t38
M: recvonly
R: D/[0-9ABCD*#]
Q: process,loop
<---
#sh mgcp statistics
UDP pkts rx 270, tx 270
Unrecognized rx pkts 0, MGCP message parsing errors 0
Duplicate MGCP ack tx 0, Invalid versions count 0
CreateConn rx 10, successful 1, failed 9
DeleteConn rx 1, successful 1, failed 0
ModifyConn rx 1, successful 0, failed 1
DeleteConn tx 0, successful 0, failed 0
NotifyRequest rx 0, successful 0, failed 0
AuditConnection rx 0, successful 0, failed 0
AuditEndpoint rx 61, successful 61, failed 0
RestartInProgress tx 4, successful 4, failed 0
Notify tx 193, successful 193, failed 0
ACK tx 63, NACK tx 10
ACK rx 197, NACK rx 0
IP address based Call Agents statistics:
IP address 10.10.10.100, Total msg rx 270,
 successful 260, failed 10
System resource check is DISABLED. No available statistic
DS0 Resource Statistics
Utilization: 0.00 percent
Total channels: 34
Addressable channels: 34
Inuse channels: 0
Disabled channels: 0
Free channels: 34
sh controller e1
#sh network-clocks
Network Clock Configuration
Priority Clock Source Clock State Clock Type
 1 E1 1/1/0 GOOD E1
 10 Backplane GOOD PLL
Current Primary Clock Source
Priority Clock Source Clock State Clock Type
 1 E1 1/1/0 GOOD E1
Thanks for your help

The explanation for your syslog message is " The B-channel indicated by this alarm has gone out of service. Some of the more common reasons for a B-channel to go out of service include: Taking the channel out of service intentionally to perform maintenance on either the near- or far-end; MGCP gateway returns an error code 501 or 510 for a MGCP command sent from Cisco Unified Communications Manager (Unified CM); MGCP gateway doesn't respond to an MGCP command sent by Unified CM three times; a speed and duplex mismatch exists on the Ethernet port between Unified CM and the MGCP gateway"
Recommended action:
Check the Unified CM advanced service parameter, Change B-channel Maintenance Status to determine if the B-channel has been taken out of service intentionally; Check the Q.931 trace for PRI SERVICE message to determine whether a PSTN provider has taken the B-channel out of service; Reset the MGCP gateway; Check the speed and duplex settings on the Ethernet port.

ORA-27023: skgfqsbi: media manager protocol error

can some one please tell me what to do regarding this error, and how can i solve it. the result log is stated below...
Recovery Manager: Release 10.2.0.1.0 - Production on Tue Oct 16 15:26:49 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN>
connected to target database: MOT (DBID=2759813257)
using target database control file instead of recovery catalog
RMAN>
echo set on
RMAN> run {
2> allocate channel oem_sbt_backup type 'sbt_tape' format '%U';
3> backup as BACKUPSET current controlfile tag '10162007032648';
4> restore controlfile validate from tag '10162007032648';
5> release channel oem_sbt_backup;
6> }
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on oem_sbt_backup channel at 10/16/2007 15:26:50
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27023: skgfqsbi: media manager protocol error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_connect: Internal error - could not connect to obproxyd (Oracle Secure Backup error: 'bad port name specified (OB SBT proxy manager)').
RMAN> allocate channel for maintenance type 'sbt_tape' ;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on ORA_MAINT_SBT_TAPE_1 channel at 10/16/2007 15:26:51
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27023: skgfqsbi: media manager protocol error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_connect: Internal error - could not connect to obproxyd (Oracle Secure Backup error: 'bad port name specified (OB SBT proxy manager)').
RMAN> delete noprompt backuppiece tag '10162007032648';
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=125 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of delete command at 10/16/2007 15:26:51
RMAN-06168: no backup pieces with this tag found: 10162007032648
RMAN> exit;
Recovery Manager complete.

can some one please tell me what to do regarding this error, and how can i solve it. the result log is stated below...
Recovery Manager: Release 10.2.0.1.0 - Production on Tue Oct 16 15:26:49 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN>
connected to target database: MOT (DBID=2759813257)
using target database control file instead of recovery catalog
RMAN>
echo set on
RMAN> run {
2> allocate channel oem_sbt_backup type 'sbt_tape' format '%U';
3> backup as BACKUPSET current controlfile tag '10162007032648';
4> restore controlfile validate from tag '10162007032648';
5> release channel oem_sbt_backup;
6> }
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on oem_sbt_backup channel at 10/16/2007 15:26:50
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27023: skgfqsbi: media manager protocol error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_connect: Internal error - could not connect to obproxyd (Oracle Secure Backup error: 'bad port name specified (OB SBT proxy manager)').
RMAN> allocate channel for maintenance type 'sbt_tape' ;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on ORA_MAINT_SBT_TAPE_1 channel at 10/16/2007 15:26:51
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27023: skgfqsbi: media manager protocol error
ORA-19511: Error received from media manager layer, error text:
sbt__rpc_connect: Internal error - could not connect to obproxyd (Oracle Secure Backup error: 'bad port name specified (OB SBT proxy manager)').
RMAN> delete noprompt backuppiece tag '10162007032648';
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=125 devtype=DISK
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of delete command at 10/16/2007 15:26:51
RMAN-06168: no backup pieces with this tag found: 10162007032648
RMAN> exit;
Recovery Manager complete.

Sun Download Center Maintenance

The Sun Download Center will be unavailable Wednesday, July 21, from 4:00 � 6:30 PM (PDT) due to scheduled maintenance. Downloading releases and updates of Sun Java Studio products will not be possible during this time.

The update center for Java Studio Creator continues to fail... the error in the IDE log is:
java.io.IOException: Server returned HTTP response code: 500 for URL: http://www
a.sun.com/services/qmds/query/metaCreator/catalog.xml?idev=4.26.1&auv=&lc=en&ibr
=creator&osname=Linux&osarch=i386&osversion=2.4.20-31.9smp&sn=<SERIAL NUMBER REMOVED FOR SECURITY REASONS>
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnecti
on.java:791)
at org.apache.xerces.impl.XMLEntityManager.setupCurrentEntity(Unknown Source)
at org.apache.xerces.impl.XMLVersionDetector.determineDocVersion(Unknown Sour
ce)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source) at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
at org.apache.xerces.parsers.DOMParser.parse(Unknown Source)
at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(Unknown Source)
[catch] at org.openide.xml.XMLUtil.parse(Unknown Source)
at org.netbeans.modules.autoupdate.XMLUpdates.parseDocument(Unknown Source)
at org.netbeans.modules.autoupdate.XMLUpdates.access$500(Unknown Source)
at org.netbeans.modules.autoupdate.XMLUpdates$2.run(Unknown Source)
at org.openide.util.Task.run(Unknown Source)
at org.openide.util.RequestProcessor$Task.run(Unknown Source)
at org.openide.util.RequestProcessor$Processor.run(Unknown Source)
Any ideas?

Some services in maintenance after reboot

Hi,
I installed solaris 10 and everything ran fine for a month. I recently upgraded memory on the server and when I rebooted, some of the services were put in the maintenance mode.
Here is the solaris 10 release info:
bash-3.00# cat /etc/release
Solaris 10 1/06 s10s_u1wos_19a SPARC
Copyright 2005 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 07 December 2005
Here is the error during boot up
irvsun12 console login: Mar 2 11:20:42 inetd[230]: Property 'name' of instance svc:/network/rpc/rstat:default is missing, inconsistent or invalid
Mar 2 11:20:42 inetd[230]: Invalid configuration for instance svc:/network/rpc/rstat:default, placing in maintenance
Mar 2 11:20:42 inetd[230]: Property 'name' of instance svc:/network/rpc/rusers:default is missing, inconsistent or invalid
Mar 2 11:20:42 inetd[230]: Invalid configuration for instance svc:/network/rpc/rusers:default, placing in maintenance
Mar 2 11:20:43 inetd[230]: Property 'proto' of instance svc:/network/telnet:default is missing, inconsistent or invalid
Mar 2 11:20:43 inetd[230]: Invalid configuration for instance svc:/network/telnet:default, placing in maintenance
Mar 2 11:20:43 inetd[230]: Property 'name' of instance svc:/network/nfs/rquota:default is missing, inconsistent or invalid
Mar 2 11:20:43 inetd[230]: Invalid configuration for instance svc:/network/nfs/rquota:default, placing in maintenance
Mar 2 11:20:43 inetd[230]: Property 'proto' of instance svc:/network/ftp:default is missing, inconsistent or invalid
Mar 2 11:20:43 inetd[230]: Invalid configuration for instance svc:/network/ftp:default, placing in maintenance
Mar 2 11:20:43 inetd[230]: Property 'proto' of instance svc:/network/finger:default is missing, inconsistent or invalid
Mar 2 11:20:43 inetd[230]: Invalid configuration for instance svc:/network/finger:default, placing in maintenance
Mar 2 11:20:43 inetd[230]: Property 'proto' of instance svc:/network/login:rlogin is missing, inconsistent or invalid
Mar 2 11:20:43 inetd[230]: Invalid configuration for instance svc:/network/login:rlogin, placing in maintenance
Mar 2 11:20:43 inetd[230]: Property 'proto' of instance svc:/network/shell:default is missing, inconsistent or invalid
Mar 2 11:20:43 inetd[230]: Invalid configuration for instance svc:/network/shell:default, placing in maintenance
Mar 2 11:20:43 inetd[230]: Property 'proto' of instance svc:/application/x11/xfs:default is missing, inconsistent or invalid
Mar 2 11:20:43 inetd[230]: Invalid configuration for instance svc:/application/x11/xfs:default, placing in maintenance
Mar 2 11:20:43 inetd[230]: Property 'proto' of instance svc:/application/print/rfc1179:default is missing, inconsistent or invalid
Mar 2 11:20:43 inetd[230]: Invalid configuration for instance svc:/application/print/rfc1179:default, placing in maintenance
Any help on getting this resolved is appreciated.
Thanks

Many thanks hubery.
I had mutiple svc network service errors or warnings when re-booting a Solaris 10 x86 10/09 u8 after adding the box to MS Active Directory using adjoin.sh as per the paper written by Wajih Ahmed and Baban Kenre (Thanks for the notes guys by the way, mines working against 2003 with no service pack after installing SFU(Services For Unix)).
I'd also installed the Dec. 09 patch bundle to no avail. Thank goodness we don't get those meaningless patch errors now, just 'skipped' or 'success'.
The nsswitch.conf file looked like this.
networks: ldap [NOTFOUND=return] files
protocols: ldap [NOTFOUND=return] files
rpc: ldap [NOTFOUND=return] files
ethers: ldap [NOTFOUND=return] files
netmasks: ldap [NOTFOUND=return] files
bootparams: ldap [NOTFOUND=return] files
publickey: ldap [NOTFOUND=return] files
After removing the [NOTFOUND=return] section on each line the warnings no longer appear on boot, yay.
Here's the complete working nsswitch.conf file:
# Copyright 2006 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
# ident "@(#)nsswitch.ldap 1.10 06/05/03 SMI"
# /etc/nsswitch.ldap:
# An example file that could be copied over to /etc/nsswitch.conf; it
# uses LDAP in conjunction with files.
# "hosts:" and "services:" in this file are used only if the
# /etc/netconfig file has a "-" for nametoaddr_libs of "inet" transports.
# LDAP service requires that svc:/network/ldap/client:default be enabled
# and online.
# the following two lines obviate the "+" entry in /etc/passwd and /etc/group.
passwd: files ldap
group: files ldap
# consult /etc "files" only if ldap is down.
hosts: dns files
# Note that IPv4 addresses are searched for in all of the ipnodes databases
# before searching the hosts databases.
ipnodes: dns files
networks: ldap files
protocols: ldap files
rpc: ldap files
ethers: ldap files
netmasks: ldap files
bootparams: ldap files
publickey: ldap files
netgroup: ldap
automount: files ldap
aliases: files ldap
# for efficient getservbyname() avoid ldap
services: files ldap
printers: user files ldap
auth_attr: files ldap
prof_attr: files ldap
project: files ldap
tnrhtp: files ldap
tnrhdb: files ldap

Business Packages for Maintenance Technician

Hi all.
We imported the Business Package for Maintenance Technician and previously we followed the prerequisites on the documentation.
For the step "You have set up the system alias SAP ECC Manufacturing in the portal" the alias was created for the system SAP_R3, I simply create the alias n no more.
When i try to execute the preview of any iView i.e. "Create Confirmation" the following error appears:
"Exception in SAP Application Integrator occured: Application URL ':///sap/bc/webdynpro/sap/rman_prsp_conf_app/;sap-ext-sid=x2bvhbLxismPPWD3O5rgfA%3D%3D7AFrHLsz6dPb8oNUuj4jqg%3D%3D' is not valid! Please check the protocol and host entries for system 'SAP_ECC_Manufacturing'..
Exception id: 12:03_26/02/07_0022_19277150
See the details for the exception ID in the log file"
Does anybody knows what i have to do or where am i wrong.
Thx.
Best Regards.
Gregory.

Hi Vicky.
Sorry about the delay.
I think the order is not too important, only the first step: installation of the business package for common parts.
I recomends u follow the prerequisites on http://help.sap.com/saphelp_erp2005vp/helpdata/en/04/5cd2416d9c1c7be10000000a1550b0/frameset.htm
Also have a look to the oss notes: 517484 n 921051
Define a SAP_R3 system into the portal with the following properties:
1) Connector
Application Host: <ur ECC hostname> (complete)
Remote Host Type: 3
SAP Client: <ur ECC client>
SID: <ur ECC system ID>
SAP System Number: <ur ECC system number>
Server Port: <32 + SAP System Number> (i.e. 3201)
System Type: SAP_R3
2) ITS
ITS Host Name: <ur its host name>:8000
ITS Path: /sap/bc/gui/sap/its
ITS Protocol: http
3) WAS
Web AS Host Name: <ur ECC host name>:8000
Web AS Path: /sap/bc/webdynpro
Web AS Protocol: http
4) User Management
Authentication System Type: <a value that applies for ur system>
Logon Method: <a value that applies for ur system>
User Mapping Type: admin,user
And with the aliases: SAP_ECC_Manufacturing n SAP_ECC_Common.
I hope it helps u.
Regards.
Gregory.

ALV - error protocol

Hi All
I'm writing an ALV report to do table maintenance of a Z table.
I've used bits of BCALV03 & 04 and other BCALVs.
I can add new lines and edit fields in the report screen.
I have build F4 to get possible values into my screen fields.
My problem is if I find errors in the form Combi_check and the last
change to a field was made via F4 my Log-protocol is not shown.
If my last change to a field before Combi_check was done manuelly
my Log-protocol is shown OK.
What are I doing wrong ?
I'm using
handle_data_changed
for event data_changed of cl_gui_alv_grid
importing er_data_changed.
method handle_data_changed.
data: ls_good type lvc_s_modi.
loop at er_data_changed->mt_good_cells into ls_good.
perform combi_check
if lv_error ne space.
Create Error-protocol
 loop at it_error_tab into wa_error_tab.
 if not wa_error_tab-error eq space.
 CALL METHOD er_data_changed->add_protocol_entry
 EXPORTING
 i_msgid = '0K'
 i_msgno = '000'
 i_msgty = 'E'
 i_msgv1 = wa_error_tab-txt
 i_fieldname = wa_error_tab-fieldname
 i_row_id = ls_good-row_id.
 endif.
 endloop.
 clear it_error_tab[].
 clear lv_error.
endloop.
LOOP AT er_data_changed->mt_deleted_rows INTO ls_delete.
Endloop.
endmethod. "handle_data_changed
Best regards
Svend Frederiksen
Frederiksen IT Consulting ApS
ABAP Developer / DK

Hello Svend
As Rich has already implied the DATA_CHANGED event is not yet raised when you call a search help on the ALV list. However, the event will should be raised after hitting the ENTER button which causes the dynpro to run into PAI where you, most likely, call method go_grid->check_changed_data.
If you want to validate the values selected from a search help then you need to define a handler for event ON_F4. In addition, you need to call method go_grid->register_f4_for_fields (for more details see sample report BCALV_TEST_GRID_F4_HELP).
Regards
Uwe

SUM not working today: "Unknown protocol" message

Today, I cannot use SUM on Solaris 10 u8 x86. I get a message "Unknown protocol: defaultUpdateSource". This happens every time I click Check for Updates.
Are the update servers down?

Please remove all sensitive data out of the output path. Then run the attached suc script and let us see the output or better still open a support case if possible. However, we are aware that two days ago, the update servers had some maintenance window

Disable Shared memory & Named Pipes protocols - Post implementation issues

Hi,
As per security guidelines, we disabled Shared memory & Named Pipes protocols and enabled "TCP/IP" only. Also, we changed the port# from 1433 to 1533 and after that, in management studio, SQL Server Error logs is not openning up and SQL
Agent Service doesn't start.
Error while opening SQL Server Error Logs in SSMS:
The description for Event ID 17052 from source MSSQLSERVER cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
Severity: 16 Error:10061, OS: 10061 [Microsoft][SQL Server Native Client 11.0]TCP Provider: No connection could be made because the target machine actively refused it.　
the message resource is present but the message is not found in the string/message table
Error while trying to start SQL Agent Service from the configuration manager:
SQLServerAgent could not be started (reason: Unable to connect to server '(local)'; SQLServerAgent cannot start).
We changed the Server host in the registry by entering <ServerName>,<Port#>. This resolved SQL Agent Service startup issue. After startup, we tried to run jobs but they all are failing with the below error.
Job runtime Error:
Could not load package "Maintenance Plans\Daily DB Backups" because of error 0xC0014062. Description: The LoadFromSQLServer method has encountered OLE DB error code 0x80004005 (Login timeout expired). The SQL statement that was issued
has failed. Source: Started: 4:40:45 PM Finished: 4:41:00 PM Elapsed: 15.547 seconds. The package could not be loaded. The step failed.
Resolution: If I create an alias name then all problems are solved.
Question: Alias name is the only one solution or is there any other turn around? For some reason, I’m not at all comfortable with alias name. I feel like cheating. :-) .
PLEASE COMMENT
If you feel that I have answered your question then please "Mark as Answer".

Hi,
Shared memory is a security threat reported by several security audit tools. In our company, we are using "DBProtect" and "FortiDB" tools. Both checks for "Shared memory" & "Named Pipes" protocols. In case,
our server is compromised then the last step is to get into the SQL Server to steal the data and we are trying to restrict this from being happening. So, we are disabling both protocols.
Finally, we got it worked.
"Cliconfig" in run command and enable "TCP/IP" protocols and it worked like a charm. This is a fluke resolution and I don't know the technical reason why we need to do this in "Client Configuration" on the server when
we have "Configuration Manager".
We successfully configured by disabling "Shared memory/Named Pipes" protocols. SQL Browser is also disabled & no aliases are configured.
Thanks.
If you feel that I have answered your question then please "Mark as Answer".

File Protocol does not work with double slash ...PLEASE HELP

Hi ALL
POSTING THIS AGAIN....Please have alook
I am using j2sdk 1.4.2 . In 1.4.1 version File protocol was working with double slash
But Now in 1.4.2 version I have to use /// slashes to make it work...
Can anyone shed any light on this. Has Sun changed something ?
I searched the release notes but could not find anything useful.....
Please comment .
Thanks

The problem is that it leads to maintenance problems
for our products
future releases and I need to find a good solution to
this problemRead the spec for file URLs, fix your existing code to use it, and remember this lesson for next time.
(Side note: I can't remember ever using or seeing double slases.)

Wireless ad hoc routing protocols

I have an application that uses wireless ad hoc routing protocols (node-to-node communication). Has anyone developed any application that implements wireless ad hoc networking protocols, such as route discovery, route maintenance etc. using LabView? If so, I'd appreciate if you could provide more insight on your application.
Thank you in advance.

I've done something like that in the past, but LV was not the interface to the network.
Basically, LV was used to control parameters within an embedded system (running Linux-Embedded) and sending commands over serial and / or Ethernet ports. The system was comprised of multiple boards, each running an OS with 3 layers of communication, some of which were serial, most over Ethernet.
However, the firmware took care of discovering and setting up the network. LV simply quieried the system to find out what it had to deal with (how many boards, what type, etc), then it would quiery the application to find out if the expected networks were esblished and to allow permissions over the network.
Are you trying to achieve something similar or are you trying to implement (setup) the network directly using LV?
JLV

Problem printing plant maintenance order (DEFAULT PRINTERS)

Hi,
I configured default printer in SPRO --> Plant maintenance and customer service --> Maintenance and Service Processing --> Maintenance and service orders --> Print control --> Define printer
I created 2 plant maintenance orders to test the printings jobs.
For 2 different orders, I got the following error message in the printing logs (it's in french): INOPÉRANT (means not working in english). What config should I correct. Could the problem be in the orders? Thanks.
TEST IMPRESSION 31.03.2009 u2013 PROTOCOLE IMPRESSION u2013 BORDEREAU 11100942
000011100942 0010 5210A   YUL_CONTROL#2    2060 Bon de main-d'oeuv 3 VALLIEMA   31.03.09   07:20:53
000011100942 0020 5235    YUL_ENTR#6       2060 Bon de main-d'oeuv 2 VALLIEMA   31.03.09   07:20:53
000011100942 0030 5235A   YUL_ENTR#12      2060 INOPÉRANT
000011100942 0040 5235B   YUL_ENTR#9       2060 INOPÉRANT
000011100942 0050 5235C   YUL_ENTR#9       2060 INOPÉRANT
000011100942 0060 5280B   YUL_ENTR#4       2060 Bon de main-d'oeuv 2 VALLIEMA   31.03.09   07:20:53
000011100942 0070 7230I   YMX_ENT#2        2060 Bon de main-d'oeuv 2 VALLIEMA   31.03.09   07:20:53
TEST IMPRESSION 31.03.2009 u2013 PROTOCOLE IMPRESSION u2013 BORDEREAU 13208581
Ordre Nº     Opé. Poste   Uté sortie       APap Formulaire        Cop. Utilis.    Date       Heure
000013208581 0010 5235A   YUL_ENTR#12      2060 Bon de main-d'oeuv 1 VALLIEMA   31.03.09   08:03:16
000013208581 0020 5235B   YUL_ENTR#9       2060 INOPÉRANT
000013208581 0030 5235C   YUL_ENTR#9       2060 INOPÉRANT

Hi,
I am not sure but are you trying to print shop papers at default printer specified in config.First thing is are orders released,I presume they are released hence you are getting message.
Next thing is check config as below:
Application area - O for maint orders
Planning plant - * or define your plant
Planner group - * or same as above
Shop paper - Define shop paper or *
Output device - LOCL or your device property...It is advised to put LOCL as different users can ahave different printers.
Storage mode -1 for printing only
then select print immediately and delete after output.
After this in your master(SU01) define output device as LOCL and this will pick up your default printer of your desktop or working station as configured in windows.
Also check if right shopapers you have assigned to order type,you can confirm them if you see in print preview.
regds,
atul

Protocol maintenance -OAA3

Similar Messages

Maybe you are looking for