Protocol used by WRT160NL to share USB

Do you know which protocol is used by the WRT160NL to share the contents of the USB drive??
I've read in several places that NFS is a much better protocol than Samba in terms of speed and efficiency. As WRT160NL is Linux-based, is it possible that will be NFS??
Thanks in advance for your help!!
Vuela, vuela, V.O.M.I.T.O.N.!!!

Well, Klatch I was asking for the net protocol that is used by the WRT160NL to share the contents of the USB drive attached. FAT32 and NTFS are filesystems "local" to the hard disks. Any way, thank you for your interest!
kevj,the problem is that I want to connect an old XBOX to the hard disk attached to the router, and the console is wirelessly connected through an AP to the router. The main net protocol supported by the XBOX is Samba, but as far as I know, it's not the best net protocol to share large video files. It's very useful to share "standard" files, as documents, images, etc, but not very optimum when we talk of 4GB files... Anyway, I'll make another try to connect by SMB and I'll tell you my results... Thank you very much for your help!
Vuela, vuela, V.O.M.I.T.O.N.!!!

Similar Messages

I would like to know how i can share my music using an UPnp protocole. I have an Imac but when i'm chosing the option share my file i can connect my mac to another network reader . it seems that the protocole used is not UPnp. I need this to be in UPnp.

I would like to know how i can share my music using an UPnp protocole. I have an Imac but when i'm chosing the option share my file i can connect my mac to another network reader . it seems that the protocole used is not UPnp. I need this to be in UPnp. does somebody can help ?

Google "upnp mac"

Protocol used by Oracle Financials

hi!
We have a product that monitors network traffic.Does anyone know the protocol used by Oracle Financials to talk with an App Server via a Web Browser??The sniffer trace I took shows encrypted data.
Thanx

Well, Klatch I was asking for the net protocol that is used by the WRT160NL to share the contents of the USB drive attached. FAT32 and NTFS are filesystems "local" to the hard disks. Any way, thank you for your interest!
kevj,the problem is that I want to connect an old XBOX to the hard disk attached to the router, and the console is wirelessly connected through an AP to the router. The main net protocol supported by the XBOX is Samba, but as far as I know, it's not the best net protocol to share large video files. It's very useful to share "standard" files, as documents, images, etc, but not very optimum when we talk of 4GB files... Anyway, I'll make another try to connect by SMB and I'll tell you my results... Thank you very much for your help!
Vuela, vuela, V.O.M.I.T.O.N.!!!

Recent upgrade of MAC to OS X Snow Leopard. Using a kodak easy share 2730 digital camera will not download as pix. States cannot read Have I Photo 08 7.1.5. Is this the problem?

Recent upgrade of MAC to OS X Snow Leopard. Using a kodak easy share 2730 camera cannot open pix in I Photo. States cannot read Presently have I Photo 08 7.1.5 . Does this have to be upgraded? No problems downloading from this camera previously

There's a long standing issue with Kodaks and OS X. Workatound: use a USB Card Reader.
Regards
TD

Can I share USB disc with my iPhone with airport extreme

Can I share USB disc with my iPhone with airport extreme

Yes, if you use an App like Filebrowser on the iPhone.
http://www.stratospherix.com/products/filebrowser/

How To Share USB Devices Between Two Mac's?

I am musician and have several USB controllers that I would like to share between my Mac pro and my Macbook Pro. (drum pad, keyboard controller,USB midi interface etc.) I have seen several switches offered on the net, however they all seem to be for PC from what I have found really.
Belkin 7-Port Desktop USB Hub (F4U017) was recommended but the language in the the description does not mirror the same types of functions I am seeing mentioned in units made specifically for the PC. (ie "share USB devices between 2 computers.") Did I taint my mind by looking at the PC items first? Is it really as easy as to plug two Macs into the same USB hub and share their devices? Does anyone have a working solution they are using for this type of situation? How do you do it?
If I could share 7 USB devices between the two systems, I think I would be just this side close to Heaven in ease!
thank you!
Cheers,
Marty

Thank you for the lead Direwolf, it felt like there might be a little more to it than just connecting to a hub. I just converted from PC about 8 months ago. Loving my macs!! A KVM switch I had not thought of that. I will look into. I read the wiki page and it seems like a kvm would replace the screen sharing feature the two machines can now use easy enough, only without using the cpu overhead to do it??? (i think is what I understood)
Does anyone have a model they are using and can recommend? (it's a jungle +out there+) I just did a quick search and found mostly kvm switches with 2-ports USB,. ... looking for seven, come on lucky seven! lol!
I will keep looking. In the mean time if readers have additional ideas, I will be very grateful! Cheers!

Comparing video quality of AVCHD BluRay discs using Final Cut Pro Share vs Compressor

Up front, I will admit to being a newbie when it comes to using Final Cut Studio 3 and would appreciate some feedback from the Apple forum experts.
I have spent a lot of time trying to determine how to achieve an optimum group of Compressor 3.5.2 settings so that the playback video quality of an AVCHD BluRay disc is equal to or better than one created by using the simpler auto settings of FCPro Share, version 7.0.2.
When using Compressor’s auto/default maximum settings, I experienced the same error message reported in:
Error MessageDuring Creation of Blu-ray Disc in FCP and Compressor 3.5
https://discussions.apple.com/message/12073794#12073794
I have since made some Compressor AVCHD Discs with smaller bit rate settings and compared video quality with a single FCP Share AVCHD disc. Both seem to be equal in providing a very good video when viewed on my new Panasonic DMP BDT 310 BluRay player. However, the Compressor AVCHD discs show some motion artifacts not present with the FCPro Share version, especially when scrolling text or when objects are moving through the field of view, and visible artifacts are seen from a stationary chain link fence and other lattice work in the background of the video sample.
My sample video used for the comparisons between Compressor and FCP Share discs is a 21 minute duration home movie, originally captured from a mini DV, Canon HV30 1080i camcorder using ProRes HQ encoding(1440x1080), and dragged into FC Pro 7.0.2 timeline where 10 chapter markers have been inserted.
To create an AVCHD disc using FCPro Share, Markers are used to set the IN and OUT points, Select IN to OUT from the timeline, pull down File Menu Share, Select Create BluRay from options in pop out Share pane, and designate output device along with picture files for Background, Logo, and Title options. When these are completed, click on Export. My 21-minute video required almost two hours for encoding including about 10 minutes for burning. This accomplished on an iMac 3.06 GHz Intel Core 2 Duo.
To prepare this same 21-minute video for use with Compressor, I again Select IN to Out from the FCPro timeline, but this time use File Export as a QuickTime Self Contained movie including Chapter markers. Then Open Compressor, choose Create BluRay from Template pane, right click on the down arrow in the Batch window and load the QT self contained movie file. From there I went to the Inspector window and tried various combinations of bit rate settings along with Frame Encoder options such as Better or Best motion parameter controls.
I have tried the following combinations of Bit rate settings along with varying Frame Encoder controls and burned an AVCHD disc for each example:
Example A
Compressor set to 6 Mbps Average and 8Mbps Maximum, Frame Encoder settings OFF. Approximately 4 hours to encode although the time remaining estimator indicated a larger value of ~7 hours; not an accurate estimator at all.
Example B
Compressor set to 6 Mbps Average and 8Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motionadaptive)” settings. Approximately 4 hours to encode, not the 13 hours that were estimated.
Conclusion: Comparing A & B Compressor versions, Disc B showed some improvements in reducing motion artifacts over Disc A.
Example C
Compressor set to 13 Mbps Average and 15 Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motion adaptive)” settings. Multipass checked. DeInterlace was checked. Unknown hours to encode; about 8 hours done overnight..
Conclusion: Disc C showed some minor improvements reducing motion artifacts over Disc B
Example D
Compressor Auto settings,i.e., 15 Mbps Average and 17 Mbps Maximum, Frame Encoder settings ON, using “Better (Linear Filter) and Better (Motion adaptive)” settings. Multipass checked. Approximately 12 hours to encode, done overnight. Inserted disc next morning after the overnight encoding was completed, and a few minutes later an error message pane appeared that the maximum bit rate had been exceeded. This message was consistent with the Apple posted thread referenced above. Unfortunately the long overnight encoding was wasted.
It seemed to me that the best Compressor settings for suppressing the motion artifacts were displayed by the disc burned in Example C, i.e., 13/15 Ave/Max Mbps with“Better” Motion settings in the Frame Encoder.
However, when this disc was compared to the AVCHD Disc burned using the FCPro Share, the latter still seemed much better. I do not know what the auto bit rate values are as set in FC Pro, but for me, the quality is quite good AND the motion artifacts are significantly reduced, especially evident with the scrolling text.
Sorry about this long post, but I thought the detail would be necessary for the experts, and maybe helpful to others trying to get started in this BluRay arena. Did I misuse Compressor? I think the sample video exported as a self contained QT movie was the right thing to do? Not sure where I went wrong.
Thanks in advance for Feedback and Recommendations. For now, I’m going to stay with the simpler process using Final Cut Pro Share function.
BoBo

Thank You, Brad, for responding; glad to hear I'm not the only one having similar Compressor issues.
You may have hit on something. Perhaps Compressor's use of H.264 encoding was the reason for my motion artifacts? And perhaps Final Cut Pro Share retains the 1440x1080 quality as it burns the AVCHD BluRay disc?
I had Toast 10 for less than 30 days a couple of years ago, and was lucky to get a refund.
What version of Toast do you have? Wondering if new Toast 11 has improved previous bugs, especially upgrading its Chapter text, pictures, music. I would go back to Toast if it came close to mirroring DVD Studio Pro, or even iDVD capabilities.
Thanks,
BoBo

HT1476 when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device. But when i use a gigaware (radioshack brand) usb charger, no error msg. Why?

when i plug my phone into the usb port with the apple charger that came with my phone i get an error msg say charging not supported by this device. But when i use a gigaware (radioshack brand) usb charger, no error msg. Why?

- Try restoring the iPod, first from backup and then try to factory settings/new iPod to rule out a software problem.
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, foreign material and broken or cracked plastic.
- Could you have damaged something when you took the iPod apart and replaced the Home button?

TS1587 Hello, I downloaded an ntfs systemfile from tuxera and used it to convert a usb stick, my imac froze a while after so I turned it off the on and now I have blue vertical lines on boot up and the a white screen with lots of tine blue symbols, need h

Hello, I downloaded an ntfs systemfile from tuxera and used it to convert a usb stick so I could put more than the fat32 4gb on, my Imac froze a while after so I turned it off the on and now I have blue vertical lines on boot up and the a white screen with lots of tine blue symbols after, mouse pointer moves but thats about it.
Have used R and cmd to get a menu up but once I choose one of the four options my mouse is rendered useless and I cant get any further, have downloaded, to another usb stick recovery disk assisstant and am trying to use that in conjunction with the lion option on the previously mentioned screen, computer was responding really slowly and has now frozen on the terms of software license agreement (maybe the last hurdle!) can anyone pleeeeeease help!!!!!??????

It's likely that the boot drive is failing, or that there's some other hardware fault. Run the Apple Hardware Test.
Intel-based Macs: Using Apple Hardware Test
Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly.

Can i use my ext hard drive USB 2 on the the new macbook pro laptops with a USB3

can i use my ext hard drive USB 2 on the the new macbook pro laptops with a USB3

stephan ach wrote:
but i read that there are lots of problems with the new macbook pro. i have all my data on ext. la cie hard drive. i wont have a problem reading them?
What problems specifically? If you have a problem you should start your own thread and explain the problem in detail.
External USB devices including hard drives and DVD work fine on the new Macbook Pros.

Trying to connect IPhone 4s to TV using AV TV RCA Video USB connector Does this require any special software?

Have been unable to get IPhone 4S to show up on AV TV
Using AV TV RCA Video USB connection. Have tried in
HD 720i, HD 1080i and 1080p TV's. Is there any special
software needed on the I Phone to do this? if so please
advise.

I don't think the dock can support the HDMI dongle. I know it will do Video Out via Composite cable.
The actual dock itself has not been updated for a few years, so this may explain your problem. The packaging was changed last year to include the new remote, dock adapters, and a wall charger. The dock itself is still identical to the 2009 model.

Can I use an apple ethernet to usb converter to connect my usb modem to my airport express?

Can I use an Apple ethernet to USB converter to connect my USB modem to my Airport Express?

fotosonix wrote:
That's what I thought too, then I bought this USB Ethernet adapter and on the package it says :
"Compatible only with MacBook Air Computers"... so I am not sure if I should open it.
When it was originally released it only worked with the MacBook Air which came with a special version of OS X that supported this adapter. Apple seem to have since built this support in to versions of OS X 10.6 and later for all Macs.
If you have an older version of OS X e.g. 10.3 to 10.5 then an unofficially driver is available here http://www.sustworks.com/sb_site/downloads.html
There are also third-party USB to Ethernet adapters with their own drivers like this one http://www.kanexlive.com/usb3lan

I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone. Will the base mini model run these programs?

I am considering purchasing the Mac mini for home studio audio production using Adobe Audition and a USB microphone. Will the base mini model run these programs?

The base mini has 4GB and a 5400 RPM hard drive. It is slow to start up and slow to launch large application such as Word (and I'd assume Adobe Audition) due to the slow drive. I've not used a new 4GB model, just the 8GB model, and the 8GB model (except for the slow drive) handles everything I've thrown at it, including running Photoshop, Word, Safari, and Mail at the same time but there is sometimes a delay switching between programs as the swapfile is updated. Overall I was not happy with the 5400 RPM drive (perhaps because I have MBA and iMac with Fusion drive) so I eventually upgraded it with an SSD. Now the mini is truly a warrior.

I bought my Mac Air 13' in August. Black screen problems constantly happens. I asked some of my friends who also use Air. They share the same experience. Overall, it is a pretty good computer. But it bothers me when I do work and it suddenly goes black.

I bought my Mac Air 13' in August. Black screen problems constantly happens. I asked some of my friends who also use Air. They share the same experience. Overall, it is a pretty good computer. But it bothers me when I do work and it suddenly goes black. What should I do about it?

without more information, I assume you mean a blackout from sleep issue.
Go to system preferences > energy settings > raise the "turn display off" setting up to as needed, say 5 mins. or 10 mins.
AND ...
unchecked the "Put hard disks to sleep when possible" in both the battery and power adapter tabs.
test it and check back

How Can I Get the Amount of Free Disk Space Using space using windows 7 please share example using GetDiskSpace

How Can I Get the Amount of Free Disk Space using windows 7 please share example using GetDiskSpace i have already studied http://digital.ni.com/public.nsf/allkb/9958B8E473C4EF1786256BBC0053B64F

Reading your question a bit more in detail, I doubt whether you are using Win32 API GetDiskFreeSpace function (for which my previous post is the solution) of Programmer's Toolbox GetDiskSpace function.
With reference to the second one, it works even with disks larger than 2GB but you need to use the proper formatting code to display the returned value. I updated my example to show total free space in the debug output window and added a comparison with 3GB value using UInt64TypeCompareUInt from the Programmer's Toolbox.

Protocol used by WRT160NL to share USB

Similar Messages

Maybe you are looking for