Protools 8 compatibli​ty with Windows Vista and which proper audio interface?

O K i have a compaq presario pc notebook with a cpu of 2.16 ghz and 160 gb(?) hard drive with 32 bit w/ Window Vista service pack 1. I've done a little research and it seems my computer may be compatible but i'm not sure  Is ne one using pt 8 with windows vista with no problems? also i'm not so sure about which audio interface i should be using psi, firewire,or usb even though i have 2 usb ports im hearing  its not the best choice dealing with latency and all. Is ne one using pt 8 with window vista using a usb audio interface or even firewire with any problems? thanx hope to hear from you soon!!!!

Hi again chamille2010,
Well my take would be that your rig would run Pro Tools 8 but you might struggle with the latency a bit.  I ran Pro Tools LE on a PC (with significantly lower specs than yours since it was 3 years old at the time) with a Digi 002 as my firewire interface and I did have issues with latency, which is my biggest pet peeve.  That was also on the XP Operating System so you might be better off with Vista SP1.  I would recommend going with the Digi 003 via firewire and maxing out your RAM for best results.  USB would definitely be slower and might be a cause for latency if you run into it. 
That's my opinion.  Digidesign has a pretty in-depth site for making sure your system will run Pro Tools.  I'm sure you've already checked it out but just in case:
http://www.digidesign.com/index.cfm?langid=100&nav​id=54&itemid=23954

Similar Messages

  • Problems with Windows VISTA and WPA-2

    Hi Guys,
    I am using a Linksys router supporting draft-N; it seems that after some time of usage; Windows Vista stop being able to connect to Linksys using a WPA-2 PSK.
    Everytime you search for the SSID and attempt to connect, the ''network is taking too long to connect''' and Windows always informs the user that ''limited or no connectivity'' even though the signal strength is excellent.
    Is that a common problem in Windows Visa (I am using Home Edition)?

    Yes thats the basica command problem with Windows Vista while connecting to the Wireless Network.... In this you can need to update your Windows Vista OS with all the Latest Patches and the Service Pack to improve more stability on your Vista Computer to get connected to the Wireless Network..

  • I downloaded HP bing bar in my laptop with windows vista and IE9 64 bit Nothing happens

    After i downloaded Bing bar and clicked the activation for smart print nothing happens. It shows that the bar and smart print have been downloaded and htey are in the list of add-ons but the bar does not show
    On the contrary I have an old desktop with windows XP and IE8 i did the same and the bar and the smart print icon shows and work
    What is the problem with the laptop which is the one I use the most and take it with me when I tavel?
    Please HELP!!!!!!

    Hmmm, can you try reinstalling HP Smart Print using the same document I sent before:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01812475&cc=us&dlc=en&lc=en
    1.  Expand the + sign next to I have never used HP Smart Web Printing.  How do I download HP Smart Print?
    2.  Follow the instructions under Step one: Download and install HP Smart Print
    **Note, I believe this download will install HP Smart Print, but not the Bing bar.
    If you want the Bing bar, you can try re-downloading at:
    http://www8.hp.com/us/en/partner/microsoft/bing-bar-for-hp/smart-print.html
    Thanks!
    Tara
    **Although I am an HP employee, I am speaking for myself and not for HP.

  • Experiences with windows vista and latest FATALITY drive

    This post is created? for people to post experiences with windows vista 32 bit and the latest fatality drivers!!?Tks?

    I have Fatality FPS edition, and I find that the volume keeps fluxuating in media player?during playback of music?with vista. Anyone have any idea how to fix this?

  • Database connectivity toolkit problem with WINDOWS VISTA and Microsoft jet 4.0 provider

    Hi again,
    I'm experiencing a problem with Database connectivity toolkit and Microsoft Jet 4.0 provider (MS ACCESS mdb database).
    I was able to get my application to work properly on my PC: WINDOWS XP PROFESSIONAL, VERSION 2002, SERVICE PACK 3 and Msjet40.dll ver. 4.0.9511.0 (Windows XP SP3 and Security Bullettin MS08-028).
    The same connectivity toolkit seems to have problems (although I didn't get any error dialog) on a laptop with WINDOWS VISTA ULTIMATE, SERVICE PACK 2 and Msjet40.dll ver. 4.0.9755.0.
    Does anyone have an idea whether it is a sort of compatibility issue or a different thing?
    Would it be possible to include my DLLs into the installer in such a way LabVIEW application calls those DLLs instead of the ones it finds on the host PC?
    Thanks a lot. Any suggestion or advice very welcome and appreciated.

    I ran into this with Windows7 64 but, could not get the jet 4.0 to work.  Endnd up dumping access and used sql server express, its free, and all my code worked fine, just used a different UDL to connect.  I wasted lots of time trying to find a way of getting the jet4.0 to work with 64bit windows.
    Paul Falkenstein
    Coleman Technologies Inc.
    CLA, CPI, AIA-Vision
    Labview 4.0- 2013, RT, Vision, FPGA

  • Home Sharing Between Mac and PC with Windows Vista and Wireless Ethernet

    Hello.
    I want to ask if anyone knows what is the problem.
    I have Home Sharing Activated in my two computers and File Sharing Activated too.
    My MacBook Pro has iTunes 10 and Snow Leopard all updated and my PC has Windows Vista and iTunes 10.
    My MacBook Pro is connected to my network wirelessly and my PC is connected by the Ethernet Cable.
    Anyone can help?

    since you don't describe the problem in detail, see if something here helps:
    what you want to see in iTunes is this (view from my MBP's iTunes seeing the library on my Mini)
    if you then click on the house icon, it will change to this and the shared library will load. at that point, two buttons will appear in the lower right corner of the iTunes window, being settings and import
    now you should be able to import any content from any shared library by selecting the content and clicking on import.
    if the icon looks like this , home sharing has not been set up correctly.
    in order for home sharing to work
    (a) iTunes on all machines must be authorized for the same iTunes store account
    (b) all machines must be on the same network
    (c) all machines must have access to the internet.
    if none of the above makes a difference, try turning home sharing off on all computers, then turning it back on.
    these reads will be useful: one and two.
    JGG

  • Problems with Windows Vista and Speedster 945GT?

    Hi!
    I've been trying to install Windows Vista on my Speedster 945GT-based system for some time now, but I am unable to get it to run stable.
    It hangs on random occasions when installing and if one is lucky it's gets thru the install but then it hangs at the desktop in Vista.
    I'm using the latest BIOS version out (1.2) and a Core2Duo T7600 CPU.
    I have even tried other CPU's to rule out CPU error with the same results. Same goes with different sticks of memory.
    Does anyone have a sollution to this problem?
    Btw, it works fine when Windows XP is installed.
    Best regards
    Johan

    I had similar problems with Vista 32-bit (Ultimate). I got the board with BIOS v1.0, while I also purchased a T7200 Dual 2 Core. This did not work at all. MSI Netherlands was kind enough to flash the BIOS for me with v1.2 so I could get things working. However, I was not too lucky with Vista. Could just get to the boot screen, but then it hung.
    BIOS v1.3 did the trick. I have things working now, but the onboard video is a disaster. Windows Update installed new chipset drivers but this did not help. Intel Graphics drivers did also not improve things.
    I started with an analog connection to my 1280x1024 Philips 170B2. Worked ok, but could not get the system working in a higher resolution than 1024x768 which is obviously not preferred. At that time, the DVI connector of my monitor was in use by another system, soon to be replaced by this one.
    Instead of worrying about the resolution on the analog connection I thought it was time to hook my monitor up via DVI. And then things started to get even worse.
    The POST is visible, you can see Windows starting but then there is a black screen. Windows is fully loading, I can hear through the speakers. I can even login, but still no screen.
    So I went back to analog VGA and guess what - same issue with analog VGA now!
    System works 'fine' in Safe Mode, but even the 640x480 boot option does not help.
    My temp solution now is to use my 7600GS, but as the onboard video might be good enough for me (if it works), I would prefer to get things working.

  • Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on T61/T61p

    Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD. This information can help address blue screen errors specifically related to Turbo Memory, but may not solve errors related to other issues. Please read through the instructions completely, make sure they apply to your system, and after attempting the solutions please post back with your feedback for the community.
    Some users may experience random blue screen errors with ThinkPad
    systems running Windows Vista with Intel Turbo Memory hardware. These
    blue screens may occur during normal usage on the system or they may
    occur when booting into Windows Vista. Blue screens related to the
    Intel Turbo Memory hardware may reference a stop code of 8086 with
    memory address locations of {0, 0, 0, 0}.
    There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
    Step 1: Update Intel Turbo Memory Driver
    If the driver version is before version 1.0.1.1004-7.0.3.1001, please
    update to this version.
    To determine what version of the Intel Turbo Memory driver is installed:
    1.    Click Start, then click Control Panel.
    2.    Click System and Maintenance.
    3.    Click System.
    4.    Click Device Manager.
    5.    Expand the Storage controllers category.
    6.    Double-click Intel Flash Cache Logic Chip.
    7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
    The new driver and installation instructions can be found here.
    Note: The Intel Matrix Storage Driver is updated with this package.
    Step 2: BIOS version
    If your BIOS version is older than those listed below, please update to the version listed.
    How to check your BIOS version:
    Turn off the system.
    Turn on the system.
    While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
    The
    BIOS Setup Utility menu will be displayed. If you have set a supervisor
    password, the BIOS Setup Utility menu appears after you enter the
    password.
    Check BIOS Version and Embedded Controller Version.
    Turn off the system.
    System BIOS versions:
    ThinkPad T61/T61p (14.1 inch widescreen with IEEE 1394 model) - BIOS version 1.22 (7LET52WW)
    Please
    remember that these updates do not solve every possible system blue
    screen, but they do resolve several problems related to the Intel Turbo
    Memory driver.
    Message Edited by Tim_Lenovo on 11-30-2007 07:03 PM
    Tim Supples
    Lenovo Social Media
    Got a question? Don't PM me, post it on the forum!
    Lenovo Blogs
    X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

    Thanks Tim,
    I do have my T61p fully up-to-date to the latest drivers and updates (via System Update and the Drivers&Software web page when the former is not that up-to-date).
    At the moment the most recurrent problem is this:
    http://forum.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=55
    which has been longly speculated here:
    http://forum.thinkpads.com/viewtopic.php?t=47755
    My other angst is the boot-time chkdsk hang-up problem:
    http://forum.thinkpads.com/viewtopic.php?t=52765&highlight=chkdsk
    I just wonder if this purely a Vista issue when using NV cache, the disk spinning down at almost exactly 1 hour from the beginning of the chdsk operation seems too much of a coincidence.
    This is my T61p configuration:
    Intel Core 2 Duo T7700 2.4GHz
    BIOS version 1.26-1.06
    4GB RAM 2 SO-DIMMs
    nVidia Quadro FX 570m with 512MB VRAM
    WUXGA LCD
    Seagate 7200.2 160 GB
    4GB RAM 2 SO-DIMMs
    Windows Vista Ultimate 32bit (waiting to move to 64bit)
    thanks,
    andrea
    Message Edited by abarbieri on 12-05-2007 03:48 PM
    T61p - 15.4" - T7700 - FX 570M 256MB - 4GB RAM - ST916023AS - 4965AGN - BT - FPR - 9 cell - Vista Ult. x86
    T21p - 14" - PIII 850MHz - S3 Savage/IX 8MB - 512MB RAM - 100GB 7200rpm - WinXP x86

  • Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on X61/X61s

    Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD.
    This information can help address blue screen errors specifically
    related to Turbo Memory, but may not solve errors related to other
    issues. Please read through the instructions completely, make sure they
    apply to your system, and after attempting the solutions please post
    back with your feedback for the community.
    Some users may experience random blue screen errors with ThinkPad
    systems running Windows Vista with Intel Turbo Memory hardware. These
    blue screens may occur during normal usage on the system or they may
    occur when booting into Windows Vista. Blue screens related to the
    Intel Turbo Memory hardware may reference a stop code of 8086 with
    memory address locations of {0, 0, 0, 0}.
    There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
    Step 1: Update Intel Turbo Memory Driver
    If the driver version is before version 1.0.1.1004-7.0.3.1001, please
    update to this version.
    To determine what version of the Intel Turbo Memory driver is installed:
    1.    Click Start, then click Control Panel.
    2.    Click System and Maintenance.
    3.    Click System.
    4.    Click Device Manager.
    5.    Expand the Storage controllers category.
    6.    Double-click Intel Flash Cache Logic Chip.
    7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
    The new driver and installation instructions can be found here.
    Note: The Intel Matrix Storage Driver is updated with this package.
    Step 2: BIOS version
    If your BIOS version is older than those listed below, please update to the version listed.
    How to check your BIOS version:
    Turn off the system.
    Turn on the system.
    While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
    The
    BIOS Setup Utility menu will be displayed. If you have set a supervisor
    password, the BIOS Setup Utility menu appears after you enter the
    password.
    Check BIOS Version and Embedded Controller Version.
    Turn off the system.
    System BIOS versions:
    ThinkPad X61 or X61s - BIOS version 1.06 (7NET25WW)
    Please
    remember that these updates do not solve every possible system blue
    screen, but they do resolve several problems related to the Intel Turbo
    Memory driver.
    Tim Supples
    Lenovo Social Media
    Got a question? Don't PM me, post it on the forum!
    Lenovo Blogs
    X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

    Dear Tim,
    First off, many thanks for the tips for resolving BSOD with Vista + Turbo Memory on X61.  I've been suffering from this BSOD for countless times since I bought in my X61 7673-CW9 in April 2008.
    Even prior to having the pleasure to visit this wonderful forum, I followed both steps as indicated, and updated my Intel Turbo Memory driver to 1.5.0.1013 and my BIOS to 7NETB4WW (2.14).  However, the BSOD recurrs.
    For the past two months, I've recovered my system to factory default settings using Rescue and Recovery for over twenty times, each time with the latest Intel Turbo Memory driver and BIOS.  Notwithstanding that, BSOD recurrs.
    During these painful experiences, I tried two options: 1) making my X61 up-to-date by using System Update and Windows Update (including Vista SP1 or excluding Vista SP1); 2) keeping my X61 the status as factory default (i.e. without updating through either System Update or Windows Update (the automatic/scheduled update function of both is turned off)).  In either case, BSOD recurrs.
    I'm 100% positive that the BSOD does not arise from any hardware or software/firmware I install.  I never install any hardware (e.g. RAM).  And, it is not caused by any software/firmware I install: the clear and unequivocal evidence is that at one time,I encountered BSOD while having restored back to factory setting and booting for the first time.
    I live in Taiwan, and I seldom heard this BSOD here.  All of my friends (as most of Taiwan residents) using X61 operate in Traditional Chinese environment, whereas I operate in English environment.  In Taiwan, when booting for the first time after purchase/recovery, the Windows Vista Business system provides for lanuage choice (Traditional Chinese or English), and, once chosen, the language cannot be altered later on (unless, of course, the system is restored back to factory default settings).
    My system specs are the same as the day I purchased it and are listed below (as I'm not sure if my machine type X61 7673-CW9 is applicable outside Taiwan):
    Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz
    Memory: 1.00 G.B.
    System: Windows Vista Business (32-bit)
    Hard Drive: 160 G.B. @ 7,200 r.p.m.
    And, of course, with Intel Turbo Memory 1 G.B.
    I contacted the Lenovo support staff here in Taiwan for countless times, but they seem to be clueless.  I learned that some friends at this forum downgraded their OS back to Windows XP, but I chose not to.  The reason is simple: my purchase price for X61 7673-CW9 includes the Intel Turbo Memory, which cannot function under Windows XP (at least so far).
    Therefore, I just wish to share my experience here and perhaps I can get some advice from you and other friends here.  Any advice will be tremendously and enormously appreciated.
    Kevin Chen @ Taiwan

  • Using mac.mail with windows VISTA and outlook

    I have a new Toshiba laptop with VISTA and am having problems sending links or messages when not in mac.mail. The setup with windows mail is asking me to provide the names of the "incoming server and "outgoing server which I am unable to identify or find in mac.mail.
    Can anyone help me to set this up properly in windows.
    thanks

    http://docs.info.apple.com/article.html?path=Dotmac/Mail/en/mac14.html

  • I want to sync between a netbook with Windows 7 and a laptop with Windows Vista, and the bookmarks don't transfer?

    Everything else looks like it transfers (though appearance is different, I'm guessing from different Windows), but bookmarks are blank when transfer from Windows 7 to Windows Vista.

    Firefox's built-in ability to play MPEG-encoded media through its built-in HTML5 player requires the Media Foundation components of Windows.
    Some users may have blocked this from within Firefox in order to make it easier to download MP3s. To double-check on that:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''media''' and pause while the list is filtered
    (3) If '''media.windows-media-foundation.enabled''' is in bold type and "user set" to false, double-click to switch its value back to true.
    (4) If '''media.windows-media-foundation.play-stand-alone''' is in bold type and "user set" to false, double-click to switch its value back to true.
    Then try reloading the tab with the MP3.
    If Firefox is set to use Media Foundation and it still doesn't work, maybe something is missing from Windows. Another Windows 7 user reported that they were able to fix a problem with Media Foundation using a download from Microsoft:
    <blockquote>Solved the problem, installed the Windows Media Feature Pack ([http://support.microsoft.com/kb/968211]) which gives you the Media Player, DVD Maker and Media Center.
    I've deactivated those three via the Control Panel and still got MP3 support.&nbsp;:D</blockquote>

  • Installation failed with Windows Vista and JDK1.602

    Hi All,
    Appreciate any help to resolve the following installation error on my Windows Vista system with JDK1.602
    Pop-up Error Message:
    The installer is unable to run graphical mode. Please check the value of the DISPLAY environment varibale.
    Thanks,
    CP

    JSE8.1 (based on NetBeans 5.0) is not supported on Vista. You may want to consider using the latest NetBeans 5.5.1. (NetBeans is where all future development is planned for).
    http://forum.java.sun.com/thread.jspa?threadID=5192837
    From the release notes of NB551:
    # Issue #85361: NetBeans 5.5 installer does not start on Windows Vista.
        Description: On systems running Windows Vista, the NetBeans 5.5 installer fails to start
    and a message suggesting running with the "silent" or "console" flag appears.
        Workaround: To correct this, run the installer on JDK 6.0 build 96 or newer.
        If you encounter further difficulties, disable Compatibility Mode manually. You can do
    this by right-clicking the .exe installer file and choosing Properties from the pop-up menu,
    then deselecting Compatibility Mode in the Compatibility tab of the File Properties dialog.
    Note that if Compatibility Mode was turned on automatically, it is necessary to disable it
    for both the current user AND all users. To do so, click the "Show Settings for All Users"
    button, then deselect the Compatibility Mode checkbox in the "Compatibility for All Users"
    dialog.You can try the same workaround for installing jse8.1, to see if that works. But, it is an older version that is not supported on vista and hence my suggestion to consider a later version of NB.

  • Cannot sync with Windows Vista and BB 7105t

    I was using Windows XP and everything worked great. Now I have Vista and cannot sync. I open the BB Desktop Manager and it says my device is disconnected. I am plugged in to a USB port, tried two different ones and makes no difference. Thus when I go to Synchronize, the Sync or Configure PIM are not available.  Also when I just plug into my computer to charge, I get a message "USB charge current is not suffigient. . . . "  However, it does charge, just a little more slowly than with my XP computer.  Any suggestions?

    Hi and welcome to the forums!
    Here is what you need to do.
    Use this procedure to cleanly uninstall the DM you have loaded:
    http://www.blackberry.com/btsc/search.do?cmd=displ​ayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub​...
    Go to here and download Desptop software 4.2.2 without Media manager;
    https://www.blackberry.com/Downloads/entry.do?code​=A8BAA56554F96369AB93E4F3BB068C22
    Cold boot the PC after de-install and :
    Install with these Vista condierations:
    1. Right-Click on Command Prompt in Start Menu and choose Run as Administrator
    2. Navigate to C:\Program Files\Research in Motion\Blackberry\IS71 Connectors\MS Outlook Connector by typing: c:\> cd program files\research in motion\blackberry\is71 connectors\ms outlook connector
    3. Then type in the command prompt, type: regsvr32 MsOutlookConnector.fil
    4. If the registration is successful, the following message displays:
    DllRegisterSErver in msoutlookconnector.fil succeeded.
    5. Close and open Blackberry Desktop Manager to perform the synchronization process again and Outlook will be in the list...
    If you receive the error message DllRegisterServer failed with error code 0x80070005 - you do not have admin rights. So, it's important that you run command prompt as admin. 
    http://sampath.wordpress.com/2008/03/04/installing​-blackberry-desktop-software-on-vista/
    Now go to your carriers blackberry software site, get the correct device OS and make sure the app loaded can find it.
    Configure the DM and try to sync.
    If you need more information, please ask!
    If not, please resolve the post using the options by the kudos’ star
    Just check the post that had your answer!
    Thanks 
    Message Edited by Bifocals on 10-17-2008 07:41 AM
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Cannot save form with Windows Vista and Adobe Reader 8

    I have many forms created with Adobe Livecycle Designer 8. Users who have upgraded to Windows Vista can no longer save these forms. Any ideas?
    thanks.

    I don't have Vista, but in XP I have found deleting the printer driver
    and re-installing sometimes works.
    Mike

  • Dual-Boot Your HP TouchSmart With Windows Vista and Windows 7 in Three Easy Steps

    Good article on creating a dual-boot environment. Here
    HP Product Expert for the Officejet Pro X Series.
    Was your question answered? Mark it as an Accepted Solution!
    See a great post? Give it a Kudos!

    claudecat87 wrote:
     We have two computers in the office, and i am usually on our dell comp, while my bf uses the touchsmart. We just came home to find that our computer had shut itself off on its own. upon starting it, the computer would only get as far as showing the HP screen (a blue screen with a hand and objects flowing from the hand) and the four menu options { F10: setup" esc: boot menu' F11 system recovery F9 :diagnostics}. At the bottom right side of the screen it also says v 5.10. Now, when we have pressed any of the options, the computer does nothing. It would appear that perhaps the computer can not tell windows 7 to boot or something. Unfortunately we do not have the install disc either...  Any thoughts?
    Seems like it's stuck at the POST Screen, and nothing's responding.
    I suggest removing all the USB and peripherals plugged into the PC and leave only the power and the USB keyboard receiver- nothing else.
    Then try turning on the computer, if it doesn't work, I don't think there's any fix except to keep trying.
    If you can get in, i suggest making a backup as soon as you can.
    After that, if it still does it, then call HP at 1-866-408-5408 or chat with them at : http://welcome.hp.com/country/us/en/contact/chat_1.html
    I have more HP devices than you'd expect.
    1 HP TouchPad 32 GB with Android
    2 HP Touchsmarts (310-1000z and IQ527)
    2 HP Printers (J6480 and J5750)
    1 Laptop (HP DV6253CL)
    Have at least some experience in each of those devices, and i'll do my best to help you.
    Kudos if I helped!

Maybe you are looking for

  • 500 Internal Server Error in Petstore - how to resolve?

    Hello, after the installation of Petstore 1.1.2, OC4J 1.0.2.2.0, J2SDKSE 1.3.1, J2SDKEE 1.3.0, Oracle 8.1.7.0 i get a 500 Internal Server Error Error parsing JSP page /productcategory.jsp line 13 Property 'numItems' of bean/tag 'com.sun.j2ee.blueprin

  • Error message: Windows\prefetch\Firefox.exe-06188867.pf is corrupted and unusable. What do I do ?

    The error message suggests that I run 'chkdsk' utility, but something prevents this from runnning. I tried re-installing Firefox, but did not uninstall first. Is this the best approach ? AND .. Most important .. If uninstall, and re-install, Will I l

  • Share an 8600 N911g with a notebook

    I want to share an HP Officejet Pro 8600 N11g with a Chromebook

  • Is this page a threat?

    I frequent various casual games sites/blogs and today one of my bookmarked addresses caused the whole system to grind and moan. The url i have bookmarked is "http://www.funny-base.com/games/arcade.html". After five minutes of unresponsive activity, b

  • Audit Vault Agent Installation issue

    Hi All, I have installed the following things 1) Audit Vault Server (10.2.2.0.1) on a Windows 2003 Server 2) I completed the post-installation tasks 3) I am trying to install Audit Vault agent (10.2.2) on HPUX (11.11) machine. I start the AV Agent ru