ProTools user, thanks to latest upgrade, ProTools will not load?!

hi, i've checked with the DigiDesign (ProTools) user forum, and found there's a fix for the ProTools 'no-load' problem.
however, i'm unhappy that i have to trash quicktime 7.2, and re-install QT 7.0.1, adn then re-install ProTools.
everything was wokring great until this latest update.
has anyone else come across this problem?
also, i have AppleCare. where amongst this vast "Support" site, do i login and actually use it?!?!?!
please help, Angelo

I have this issue (or a similar one) too. QuickTime 7.2 prevents plugins from loading in Pro Tools, Logic Pro, DP, etc. Plugins simply freeze when the host tries to initiate them. If I remove all the plugins from the respective plugin folder, the host DAW will open normally. I can't update prebinding, as it returns a dylib error, and none of the other "fixes" have worked. I've reverted to 7.1.6 until I can find a fix that works.

Similar Messages

Since installing the latest update, Firefox will not load; it gives me the following error -- XML Parsing Error: not well formed.

since installing the latest update, Firefox first operated with some errors but now will not load at all; it gives me the following error --
XML Parsing Error: not well formed
locations chrome://browser/content/browser.xml
Line Number 1191, column 20:
utton id="back-forward-dropmarker" type="menu" chromedir="&locale.dir;"-------------------
please note that the words "utton ID" are exactly as the error message gives it; and at the end of the message there are exactly 19 hyphens.
I don't know why this faulty code is referencing things to do with "chrome"... the Chrome browser is not installed on this PC or anywhere on our network.
Also, this is not the first problem I had after clicking Firefox's prompt for the latest update. Before Firefox retreated into this error message, it was loading but running with some faults...
1. the bookmark symbol was not appearing on the right hand side of the URL line, so I had always to click on "bookmark this page", after which the bookmark symbol did appear; however I don't know if the bookmarking function worked properly.
2. the back and forward buttons were not highlighted, as if I had not come from a previous page; so once I clicked on a link to a new page I could not go back to where I came from because Fiefox thought I hadn't come from anywhere.
3. there may have been other errors, but I did not find them.
How do I reinstate my Firefox program to work properly please? do I have to download the latest version and reinstal? if so, do I have to remove the old version first? or is there a fix?
Even to write this message I have been forced to use (yuk -- I don't like to say this!!!) Internet Explorer. So please -- I need help urgently.
Thanks,
NOEL

Some how I solved my problem by opening a user account and downloading Firefox 4.0 beta and installing it, I did try it, worked fine, so I did close the user account and did go back to my own account(switched user), the main page that I had problem with Firefox which would not open, I dabble click on Firefox it start working again!! I hope that solves your problem too.
firefox will not open, it gives me this cod and would not turn off, Error on switching in renew: NS_ERROR_UNEXPECTED, Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.getCharPref] id: none

CS6 upgrade suddenly will not load, telling me it is a trial version of CS6 Ext and I must register.

I upgraded from CS5 to CS6 for my IMac. I downloaded CS6 put in my serial number and it worked fine for a number of weeks. Suddenly, when I went to use it it said it was a trial version. I had to register it to use my CS6 I registered it and it worked, but only as a trial version of CS6 Extended. I do not want CS6 Extended. I deleted it from my hard drive and once again downloaded my upgrade of CS6 again with my serial number and it worked fine for a couple of weeks. Today, once again, it tells me it is a trial version and will not load unless I register the trial version. What the heck is going on? This is crazy. I simply want to use CS6, for which I paid. Help!
Frank Brault

There is a lot of this going around. Adobe is aware of problem and hope to get a fix soon. http://forums.adobe.com/thread/1114727?tstart=0

After updating iTunes to latest version, Firefox will not load.

I installed the new version of iTunes that supports ios6 this morning. Right after that Firefox will not start. It flashes some kind of message in the lower right corner that I cannot read. Task Manager says it is running, but not on my screen.

Look in Processes in the Task Manager. If Firefox is running, you see firefox.exe in there. You can remove it from there.

HT1766 download latest upgrade iphone will not start and stock in retore mode

Just updated my Iphone 4s with new update software requested by apple in my setting; now its stuck in retore mode. i always comply with the new updates to keep my phone up to date, now this.
What can i Do. is there a fixit software out there that can fix this?

http://support.apple.com/kb/HT1808

HT5278 the latest security update will not load....anyone else having this problem?

this is what it tells me......The file “SecUpd2012-002Snow.pkg” couldn’t be found on the server “swcdn.apple.com”.

Get the standalone
http://support.apple.com/kb/DL1526

TS2972 My library will not load on Apple TV following latest iTunes upgrade

All was working fine until the latest iTunes update was installed. Now my photos strem and my screensaver still works but I can't access the library as it will not load. Have tried all troubleshooting tips on Apple TV help.

Same thing happened to me. Reset your router.

TS3297 After downloading the latest version of iTunes, the store will not load. It appears as if it has loaded, but the screen remains blank.

After downloading the latest version of iTunes, the store will not load. It appears as if it has loaded, but the screen remains blank.

I have the same problem and have been fighting with it for several days. I think the last thing that I did before this happened was to let Quicktime update itself. When I open itunes and click on store, the connecting bar gets halfway and then stops. That leaves me with the white store page, if I leave it alone for a bit, I see words as in names of singers and but no pictures.
I have ran the diagnostics and see no problems at all, no event logs in windows, no errors at all. I've un-installed itunes and re-installed but no change. I'm using Norton 360 from comcast. I have windows 7 pro 64 bit. Also, the help in itunes doesn't display.
I put in a ticket with apple and the response I got back basically told me to do what I've already done. I created a new user and have the same issue.
Any help at all will be very much appreciated. I think this started August. 8, 2011.
thanks so much for reading

Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

Ok this is bizzare!
Thank you for your response, I went throught each and every step without any luck, even got the recovery programme, and painstakingly tried to sift through all that mumbojumbo to find what i needed. finally found the bookmark bit, but it had been fully overwritten :(, so on reading about previous ff versions, found the sqlite thingys, and they were relatively unscathed(partly written over, but saveable apparently TG), saved them to adiff drive, amongst other possibly good folders. Then looked up how to install them, and it said to close FF, and install to profile folder.
So i tried to close FF, and the original problem from a few days ago, where it asked me if 'i was sure i wanted to close this window as it has X tabs open', popped up again. This is where 'open blank page' selection was set, over 'open previous tabs'. Wanting to save that info on how to sort out these friggin files, I reset the Option to 'open previous tabs', and closed FF. After unsucessfully searching for the profile folder on my laptop, i opened FF intending to search online for where i could find said folder.
AND BANG, surprise surprise, the FF I had just closed with only tabs open about finding out what the heck to do, had disappeared, and instead my original saved tabs were up, and my bookmarks are there..... I am gobsmacked! what the heck just happened there???
I have made 3 back up in different folders now, of those friggin bookmarks. I am weary now tho of shutting it all down.... what if its back to the other pages I had with no bookmarks, tomorrow :(

After upgrading to 9.0.1 Mozilla Firefox for my pc, Firefox will not load any web pages.

After upgrading to 9.0.1 Mozilla Firefox on my pc, Firefox will not load any web pages whatsoever, not even itself. My OS is Windows Vista 64. Thanks for any help. (Having to use Internet Explorer presently.)

Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
* Update All your Firefox Plugins -> [https://www.mozilla.org/en-US/plugincheck/]
** '''When Downloading Plugins Update setup files, Remove Checkmark from Downloading other Optional Softwares with your Plugins (e.g. Toolbars, McAfee, Google Chrome, etc.)'''
Check and tell if its working.

Bridge Messages will not load messages after 1.0.6.2390 upgrade

After I updated to 2390, messages will not load, after about 5 minutes it will display content of last message but left side message list will not populate. I just keep giving me the GREEN CIRCLE WAITING and will not load messages. This is the first time I've had any problems with bridge messages. All the other bridge apps (calendar, notes, contacts, bridge browser) all work. I un-installed bridge from my phone (ver 1.0.0.93) and re-installed it, still no luck. I re-booted PB, no luck. Is anybody else having a bridge message problem since 1.0.6.2390 update.

tboyd wrote:
Knottyrope, I deleted all bluetooth profiles, phone and PB, did battery pull on phone, playbook reset. paired phone with PB and after 8 minutes I can see the header of 1 email message and under the All messages list on left side it is blank and the GREEN CIRCLE of WAITING is still spinning.
Calender works, contacts works, Bridge browser works, bridge files works, but bridge messages will not load.
I never had any problem with bridge messages working through all the previous OS upgrades.
If you did all of that, then maybe there is an issue we cant help with, please call support to get your PlayBook logs, so RIM can address it in a future release or maybe they have a fix we dont know about.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

After update finished-browser will not load on user site

i upgraded to firefox 4 from 3.6. when the upgrade finished- the browser will not load on one of my user sites. the upgrade froze half way through and the computer restarted on that site. no matter how many times i try to finish the upgrade, it gives me the same results- the browser will not load even though the upgrade window tells me it is finished-every time i try to open the browser window it never comes up

I googled my problem and found myself at some place with a link
This was not an Adobe Forum.
I clicked the link (legitimate) and the update was perfect.
When I first went to adobe to update , it failed. Gave me some error thing.[ I never update from a popup.]
Only from the real website. I tried to get help from chat and they referred me to the forum where I guess you found my question.
I hope this helps someone. All is good now.

J6480HP Upgrade Box will not go away

HP upgrade box will not go away on my screen. We have tried to update from HP and it says there are no updates. Very irritating!

Hope you are doing well and sorry that you are having this issue;
Are you still experiencing this issue, if you are, have you restart the computer and printer to see if there a change.
This is the main support page for your printer GO HERE in case you need it for further reference.
Let me know I will do my best to help you.
Hope this helps;
RobertoR
and remember
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Upgraded to 7.o.1(x86en-us) will not load asks for reboot i have rebooted over 10 times still will not load same message tryed to reinstall still asking for reboot still does not load

Question
upgraded to 7.o.1(x86en-us) will not load asks for reboot i have rebooted over 10 times still will not load same message tried to reinstall still asking for reboot still does not load
what can i do cannot uninstall either
thank you

Question
upgraded to 7.o.1(x86en-us) will not load asks for reboot i have rebooted over 10 times still will not load same message tried to reinstall still asking for reboot still does not load
what can i do cannot uninstall either
thank you

After upgrading to Airport Utility 6.3 Netflix will not load

After upgrading to Airport Utility 6.3 Netflix will not load more than 20 % of any movie. I get an error code N8202 from the netflix website but nothing seems to help.
Does anyone experience the same thing? (And does anyone have suggestions how to solve the problem)?

Hi and thanks for the feedback.
Well, that was why I was puzzled in the first place, but Netflix couldn't find any flaws in their system (I tried the suggestions in the link Shawn Grinter 2 posted (thanks to you as well, Shawn)).
But today everything is perky and running smooth without me doing anything about it.
Stranger than fiction, but thanks again for taking time helping!
regards,
Kristian

ProTools user, thanks to latest upgrade, ProTools will not load?!

Similar Messages

Maybe you are looking for