Provide a probing output for our board

Hello everyone,
In Comsis, we have FPGA based Wi-Fi devevelopment platforms that are our own design, namely MimoKit and MimoKit-II. Until now we used in-house methods to probe signals in these platforms but recently we received an inquiry for a probing output that is compatible with a 3rd party software such as LabVIEW. Never having used LabVIEW (or any other data acquisition software) we do not know where to start and I would be grateful if someone can point us the direction.
In a nutshell, what we are planning to do is, to stream 8 multiplexed channels, each of 32 bit data, via ethernet. We don't know how LabVIEW demultiplexes this data and interprets it? How should we proceed? (Here is a platform description http://www.comsis.fr/?p=167)
Thank you for all the help in advance
Best regards

Hello again,
I'll try to rephrase my question. We have an FPGA board which we use for developping WiFi solutions. Our work includes the analysis of raw (or processed) observations of WiFi signals as well. At the moment, when we want to analyze a signal, we simply store its values for a period of time and then we analyze the stored data (off-line).
In addition to that, we would like to provide a real-time observation/analysis ability in LabVIEW on a host PC. The communication between the board and the host PC will be handled over ethernet port. But we don't know how to proceed to make LabVIEW "understand" our real-time data. Our questions are:
What are the components needed for a device (eg: our board) to communicate with LabVIEW? What is the streaming data format? how many real time channels can be supported? How to feed multiple channels to LabVIEW?
We use Quartus to develop the FPGA code.
Thank you in advance for your help.
Best regards

Similar Messages

Output for Linux

Hi all.
We have a new client who has a Linux environment and I was
just wondering what sort of output is best for this. Currently, we
use a .chm to provide context sensitive help for our application
but I believe that won't work for Linux people. Does that sound
right?
I realise that an alternative output will no longer be
context sensitive but it would still be nice to give them access to
the content.
Any suggestions would (as always) be greatly appreciated.
Regards

Hi Kathy,
I asked a similar question about a year ago, so here's my
take on the subject.
A .chm file is a proprietary Microsoft format so only works
under Windows. You can find programs that interpret .chm files on
other operating systems, but then you have to distribute the
interpreter program as well as the help, and I'm not sure how good
the results are.
WebHelp is the way to go for a Linux environment, although
there are a few oddities in the way it displays. Peter Grainge's
site has an excellent section about WebHelp in other browsers.
Here's
the link.
The main difference between .chm and WebHelp output is that
WebHelp is not compiled, so you have to supply the client with ALL
the output files, not just a single file.
Can't help with context sensitive help as I haven't used it,
but I'm sure somebody else can chime in with the necessary
information.
Good luck!
Anne

PO output for delivery cost vendor

Hi All
Is it possible to provide purchase order output for the delivery costs to the delivery vendor.

For PO's there is only one output/form (NEU) and you will have to create an additional one for your custom requirement.
Not sure if ECC versions have more than one output type/form for PO's.
Regards,

TS1559 I bought my iphone 4s in usa apple store but when i write my serial number to support center i see warning like that. What is the problem ? Our records indicate that this product has been replaced. Please provide the serial number for your replacem

I bought my iphone 4s in usa apple store
ihave trouble with my iphone wifi that is gray and cannot connect any wifi network.
i want to support for this issue.
but when i write my serial number to support center i see warning like that. What is the problem ?
Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us.

Nobody here would know. Contact Apple and ask them

HT201412 my iphone using cant buy anything from itune store and they said i have trouble from the product (Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warr

Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please ( this is the trouble they tell us )
can't buy anything application on appstore, i bought this iphone from my friend , and this iphone actived ( 2012-11-05)
IMEI: ****
<Edited By Host>

Instead of posting your IMEI in a public forum, contact iTunes Customer Support.
FYI, they do not want/need your IMEI number.

Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us.

Hi,
i have purchased iphone 4s 16GB in india yesterday and when i m checking warranty status of my phone from https://selfsolve.apple.com/agreementWarrantyDynamic.do
i got responce
Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us.
Please help

hi
if it is from gray market is there any harm on that please let me know
my phone is working fine and even when i connected to itunes it got registered with my id,

Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us." how does this possible..???

I have a horrible time with my new Iphone-4, No SIM card found issues and while i tried to contact customer care with device serial number getting a messgae of "Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please contact us."
What step should i take next.

Where did you get the phone?
That phone was replaced by Apple or an AASP and was not returned to Apple as it should have been, or it was stolen from Apple or somewhere in the supply chain.
You can not get support from Apple for that phone.
Return it to wherever you got it and get your money back.

Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information. For more information, please

Our records indicate that this product has been replaced. Please provide the serial number for your replacement product to find the support and warranty coverage information.

hi
if it is from gray market is there any harm on that please let me know
my phone is working fine and even when i connected to itunes it got registered with my id,

We are users in Arabic world we hope that Apple company help us and provide WhatsApp for our iPad2 devices

we are users in Arabic world we hope that Apple company help us and provide WhatsApp for our iPad2 devices
because many of people around the world use it and communicate with each other by WhatsApp
hope you will help us soon, we are really suffer with this application
Thank you

I don't understand: Can't you use the version of WhatsApp which is already available for the iPhone?
In any case, it's up to the people who make that app to create a version for the iPad, not Apple. So you need to write those people about it or nothing will happen.
http://www.whatsapp.com/contact/

Adding logo to the standard PO Output for communication program

Hello All.
I need to add company logo to the Standard PO Output for Communication program. Can someone please tell me a way to do this. I went into applications and see its a Java Concurrent program. I even went into these forums and I saw there is a way to uncomment out the line in the XSL file and add the logo there , but how do I upload back to the template. The Upload Button is disabled for this template.
Can we use the Standard Purchase Order Stylesheet for this?
If so how to make changes and how can I upload it back?
Should I do an RTF temnplate?
Can someone pl help me here. We are on R12 and I am not much familiar with exposting RTF to XSF FO.
Thanks
Vidhya

We took the standard PO document XSL-FO template and enhanced for our own needs. The first of those is to utilize the company's logo. Search for 'external-graphic' in the xsl-fo template. The first hit will be the section for the logo. The comments in the template provide some guidance on what to change. For our company, I changed the URL to point to a .gif file on the Apps server ($OA_MEDIA/company_logo.gif) .
The one downside that I have found so far, is that I am have to hard-code the entire document path. This path will change between instances. So I once our production instance is defined, I will set it to that path.
- Scott

Where is the output for PWM on NI 7774 connected to motion control card 7356

Hi,
I have NI motion control card 7356 which interfaced through 7774 interface board. PWM outputs are written to be on pins 5 and 9 on Digital IO, yet there is no indication about the whereabouts of these PWMs on the interface board (7774). Would you please help???
Asst. Prof. Vasfi Emre Omurlu, Ph.D.

Simitci,
For the digital I/Os a UMI-7774 provides access to 16 digital lines. If you want to access other signals of the digital connector, you shouldn't connect it to the UMI but to another breakout box like the SCB-68. Please note that compared to the UMI-7774 the SCB-68 doesn't provide optical isolation or 24 V connectivity. If this doesn't work for you, you could think of building a customized cable that connects the lines for the16 digital I/Os to the UMI and the rest of the signals to another connector or breakout box.
You also should be aware of the fact that the PWM outputs of 73xx boards are static. That means that you can change the duty cycle and output frequency of these signals in software only, which is quite slow. In most cases these PWM signals can't be used for motion control tasks.
What do you intend to do with the PWM signals?
Thanks and kind regards,
Jochen Klier
National Instruments

Sony VAIO (VGN-NW130D) - Will Sony provided Windows 10 drivers for this model?

Hello Sony, I have a Sony VAIO (VGN-NW130D). I purchased it new in 2009. It had Windows Vista preinstalled and a bought a Windows 7 disc for my computer. Here are my questions: http://community.sony.com/t5/VAIO-Windows-10/Windows-10-upgrade-Information/m-p/513320#U513320In the above link PeterT mentions the models that Sony will provide Windows 10 drivers for. Will these be the only models Sony will provided drivers for? http://esupport.sony.com/CA/p/os10upgrade.plIn the above link Sony says it will provide drivers for models that had Windows 7 and 8 preinstalled. What if you bought a Windows 7 disc? I have tried to install Windows 10 by forcing it to do so by command prompt, and by Installing it from Microsoft's website. Both tries where unsuccessful. It would get stuck on the black upgrading screen at 32% overall and 6% installing windows features and drivers. I reserved my copy of Windows 10 and my computer meets Windows 10 requirements. If my computer meets Microsoft's requirements my PC manufacturer should provide the Windows 10 drivers. If Sony choose not to provided Windows 10 drivers for all their PC that are compatible with Windows 10, it will be really off putting and resulting in me never purchasing another Sony PC. It tarnishes a company's reputation when they do unfair things like this. This would just not be fair Sony. Sincerely,Concerned Sony customer (thinking of switching to a Mac after this horrible experience)

Light wrote:
Hello, Thanks for the replay. How do you know what vendors our computers need drivers from? Do you know if Microsoft might provide us with drivers? Been reading some of the other posts and found out that Sony has sold the VAIO brand. I will never be buying another Sony computer or other Sony products again. This is just bad customer service.Sony has said that we will have to get drivers from Microsoft. Or we will have to use the drivers that come with Win 10. You have to read other topics in this forum to find this. I have two VAIO's that aren't on the Sony supported list and one VAIO that IS on the supported list. I have to wait until Sony proivides the drivers for my supported VAIO. I will have to wait until Microsoft provides drivers for my other VAIO's. I have a fourth desktop generic PC that I have upgraded from XP to Win 7. I tried to install Win 10 on it but the Win 10 video driver only supported VGA for my legacy video board. I rolled Win 10 back to Win 7 and I will wait until I can get a Win 10 driver for my video card. If I can't get one, I will have to replace the video board with something that has Win 10 drivers. I won't have that option for my VAIO's because I can't replace the video boards. If Microsoft or GeForce don't provide a driver for my video boards, I will not install Win 10. I don't like it as much as Win 7, from what I've seen so far.

How to call the XML Publisher Report thro Standard PO Output for Comm.

Hi
We need to call our custom report(XML Publisher Report) from the standard PO Output for Communication Report.
There is a parameter(Purchase Order Layout) in PO Output for Communication in which we can see no. of standard reports. We want to add our custom report in that list so that when we will run this standard report by selecting our custom report for Purchase Order Layout parameter, we should get the output as per our Custom report.
Since PO Output for Communication is a Java Concurrent Program, we are not able to place our custom report in the list of Purchase Order layout Parameter.
Ram

Welcome to the forums !
Pl see if MOS Doc 305307.1 (How To Modify Print PO Report POXPOPDF With Custom Template) can help
HTH
Srini

IPads for the board of directors. Are they tied to one itunes account?

We want our Board of Directors to have iPads. They will use them to access the 350 page board agenda book. They will need apps to view (goodreader, etc.) and mark up the PDF agendas. I am guessing we would have a board dropbox account, also tie all 16 iPads to a single iTunes account. I can't imagine we would try to get each board member to hook up to their personal iTunes account (if they even have them.) The sticky part is that we want the board to keep the iPads (not collected after class) Anyone have experience with this?

I am interested in doing the same thing. I have heard of others using www.dropbox.com to securely distribute files to the iPads, but have not found a good way to also use them as display devices for some presentations that may be given during a meeting. Have you made any progress on this initiative since July? Regarding the single iTunes account we have done that with iPads which have been distributed to staff our clinicians for use with the Electronic Medical Record, but have not yet implemented (or identified) any tools to remotely maintain these devices.

With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked.

Provide a probing output for our board

Similar Messages

Maybe you are looking for