Provide feedback button in quiz score slide

Hi we have created a training using adobe captivate 6. We have kept a final quiz containing 5 questions. At the end there is a score slide. In case of passing of the quiz we want a button called feedback to appear. The button needs to be hyperlinked to a url. How can we do this?

cpQuizInfoPassPercent has the required percentage for passing, whereas cpQuizInfoPassFail can have only two possible values: 0 if failed, 1 if passed. So your condition will never result in true. The explanation of the system variables appears in the Variables dialog box, check them out.
I'm using the normal language of conditions: THEN is in the same view of the dialog box for actions, second portion, whereas for Else you have to click on the Else button.
The Pass/Fail actions for the Quiz you specify in the Quiz Preferences will only be done when the user clicks on the Continue button on the score slide. Because you asked for the button when entering the score slide, I proposed this work flow.
Some functionalities are extended in CP6, will certainly blog about it to compare with what I wrote for previous versions here:
http://lilybiri.posterous.com/question-question-slides-in-captivate
Lilybiri

Similar Messages

Quiz Score Slide - Review Questions

Hi all,
I have put a number of discussions now and still can't seem to get this to work.
Once a user has completed the quiz and got to the quiz score slide to find out if they have passed or failed - for both I would like them to be able to 'review answers'. I know there is a review quiz but this just tells them what they got wrong or right and not why.
I have searched on Captivate and online to figure out how to make this work. I would like the user to be able to go through each slide and when there is a question they got wrong, there is an explanation for them.
Is this possible and how do I do it?
Thanks

Hi there,
You can have a slide as an explanation slide next to your quiz slides. You can use a conditional advanced action under On Enter property of the explanation slide. With the help of a variable called cpQuizInfoLastSlidePointScored, you will check whether the last answer was correct or not and have the explanation slide show/hide accordingly. For example, if each question in your project has 10 points associated. The variable will check whether the last question slide scored points were equal to 10, if yes then jump to next question slide and if no then go to the explanation slide.
Here is how it will look in the advanced action window:
Where Slide 4 is the next question slide and Slide 3 is the explanation slide.
Hope this helps!
Thanks!

Continue Button on Quiz Results Slide NOT Working Properly

I'm experiencing a functionality issue with the "Continue"
button on the Quiz Results slide:
Situation 1: After initially completing the quiz, I need to
click the "Continue" button on the Quiz Results slide only once to
advance to the next (and last) slide in the quiz movie. This is
fine & works as I would expect.
Situation 2: After initially completing the quiz, if instead
I choose to review the quiz, later when I get to the Quiz Results
slide, I need to click the "Continue" button TWICE to advance to
the next (and last) slide in the quiz movie. This does NOT work as
I would expect.
Any idea why only 1 click is needed in the Situation 1 while
2 clicks are needed in Situation 2? Any way to fix Situation 2 so
that only 1 click is needed?
Thanks much!

CapManZ,
Whether the Continue button on the Quiz Results slide
requires one or two clicks is mysterious indeed. See
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=67&catid=464&threadid =1302278
for another discussion about its misbehavor.
Actually, the number of clicks required depends on how long
you wait after the Quiz Results slide appears, prior to clicking
the Continue button. In your situation 1 you probably answered
questions rather than using the skip button, so you viewed the
question slides for a while prior to arriving at results. In your
situation 2 you probably used the Skip button to zip through the
slides to return to the results screen. Try this. In situation 2,
when you get to the Quiz Results slide, instead of clicking the
Continue button, go get a cuppa joe and then see if a single click
will work. If so please let me know.
I've experimented with a Captivate 2 multiple choice quiz in
a slide show that contained only 10 questions and the Results
slide. I added a text caption with fade in and fade out enabled
(the default) to the Results slide. I found that after the caption
fades in, one click on the continue button advances the slide. So I
used the caption's appearance to help measure the timing.
In the tests below I skipped as rapidly as possible, pausing
at various slides to see how it affected the single click
threshold.
Skip all slides: 28 sec
View slide 1 for 60 sec and then skip: 28 sec
Skip to slide 5, pause 30 sec, and then skip: 13 sec
Skip to slide 10, pause 30 sec, and then skip: 2-3 sec
Answer each slide (took more than 30 sec): 2-3 sec
Skip all slides, click Continue as fast as possible: 2-3 sec
I also reduced the number of question slides in the quiz and
skipped all slides.
7 questions: 18 sec
3 questions: 7 sec
I believe the threshold value (the duration required before
clicking the Continue button advances to the next slide) is
composed of two durations which add together to determine the
threshold. The Result's slide's timeline probably sets the
threshold's lower limit. Clicks prior to 3 seconds are ignored.
Time per slide and number of slides left to go sets the upper limit
for the threshold. The slower the movement, the lower the
threshold.
Several conclusions:
This probably isn't a situation in which the first click is
ignored. Instead the first click reduces the threshold's value to
the lower limit. The second click would then typically occur after
3 additional seconds, particularly if the user is surprised that
the first click didn't work and pauses slightly. A very fast
additional click on the Continue button is ignored as well.
Long quizzes will cause more complaints about the issue
because of what you experienced. It typically takes longer to
answer the quiz than review it.
Perhaps there's a workaround that would alert the user that
the Continue button is ready for clicking. I'm thinking that since
the text caption fade-in coincides with being ready to continue, an
image or the like might do the trick. Any suggestions out there?
Humm, a better alternative might be to show some images of
snacks on the results slide background. Through suggestive selling,
the user realizes it's time for a break and clicks Continue after
returning with that cuppa joe. And the sound you hear? It's the
Captivate developers giggling if they read my conclusions. Too bad
they're mum, since some real info might make it easier to make
Captivate behave. Ah well.
Phil

Continue button on Quiz Results Slide not working Captivate 7

I have the Quiz Settings set to Continue when the user passes the quiz. However, when the user clicks the Continue button on the Quiz Results Slide, nothing happens. I want the user to be able to continue to the next (and final!) slide in the project. The timing for the Quiz Results slide is set to be active for 7 seconds. Umm, suggestions for a fix? Thanks. This problem has been driving me nuts since I'm so close to finishing!

I changed the timing on the results slide back down to being active for 1.5 seconds so that's what will show up in the screen shot below. I also included a screen shot for the Pass/Fail settings. Thanks.

Continue button on Quiz Result slide not working

Hi,
I really hope there's something easy I'm missing here. I've
created a quiz with 25 questions. I don't have it reporting to an
LMS, but I do have a quiz results slide. If the student gets a
passing grade, I've set the Continue button to go to the next slide
(where they get a congrats message and can print a certificate).
I'm publishing it as an SWF file. When I take the quiz and pass it,
the Continue button doesn't work. The way it is now, students are
stuck at the end of the quiz. Any ideas?

Hi J
Sorry that didn't seem to work for you. Hopefully someone
else will see it and maybe chime in with a suggestion.
Until that happens, you (as well as anyone else seeing this
behavior) should report it to Adobe as a bug.
Click
here to view the WishForm/Bug Reporting Form
Cheers... Rick

Continue button on Quiz Results slide not working...

Hi there,
Having some significant difficulties in Captivate 3 recently
- but this one appears to be a deal breaker...
The continue button which appears at the bottom of the quiz
results page doesn't work - as in, it doesn't do a thing even
though in preferences I've set pass/fail preference for it to jump
to different slides depending on success or failure. I have tried,
literally, everything I can think of but it refuses to work.
Anyone got any suggestions? I would be over the moon if I
could get this working.
Thanks in advance.
J

Hi J
Sorry that didn't seem to work for you. Hopefully someone
else will see it and maybe chime in with a suggestion.
Until that happens, you (as well as anyone else seeing this
behavior) should report it to Adobe as a bug.
Click
here to view the WishForm/Bug Reporting Form
Cheers... Rick

Add buttons to quiz-slide? Captivate 7

Hi there,
I am really having a hard time trying to add buttons to a quiz-slide (fill in the blank).
Is it really true, that there is no work-around? All I need to do, is to use the smart shapes/ image buttons, to link to other slides in the project.
Anyone??
Thanks, in advance
//Niklas

Maybe this blog post could help, because it is not always that easy to have
shape buttons on question/score slides. I encountered several small issues
and tried to figure out workarounds:
http://blog.lilybiri.com/want-a-button-on-question-slide-in-captivate
Post was written for CP6, but nothing really changed in 7.
2014-09-25 15:41 GMT+02:00 AJIT_M <[email protected]>:
Add buttons to quiz-slide? Captivate 7 created by AJIT_M
<https://forums.adobe.com/people/AJIT_M> in Adobe Captivate - View the
full discussion <https://forums.adobe.com/message/6763021#6763021>

Quiz Score in Slide Presentation

Hi All,
I have prepared a short tutorial in slide presentation format
with 20 questions at the end, and I'm trying to get the quiz score
(using Flash with AICC tracking) displayed on the last slide but I
haven't been successful so far. I am using slide template in Flash
Professional 8, and I followed the instructions in Flash help menu
including copying all the required files onto my server, but I'm
still having problem with reporting the quiz score.. The only thing
I don't understand very well in the instruction found on the help
menu is "start the LMS system (or create the AICC Course Descriptor
Files) that references the frameset.htm file."
I would appreciate if anybody could provide me with
information on where to get help on this. Maybe there is a tutorial
somewhere I am not aware of.
Dave

Bump.

Cap 6 - how to capture quiz score/route based on score & prob with Master slide?

Hi --Using Cap 6 on a Windows PC. I have a module with weighted questions, and want to analyze the score when the user completes the questions. If they score 69% or below, they must view the entire module. If they score between 70% and79%, then they can just take the quiz questions again. If they score 80% of better, their score is recorded in the LMS and they are given credit for the module.
I have two challenges:
1) The course originally was going to be an acknolwedgment-only module, so I deleted buttons from the results slide (not the results master) but when I select Reset Mater Slide in the slide properties, the deleted buttons do not re-apply onto the slide. How do I get those buttons back?
2) I created an Advanced Action called start_over. It's simple - and the "Else" statement is "continue". I set this up in Quiz Pref. Does this also get assiend as an Action on the slide properties?
Result is that the quiz just stops. The quiz results slide displays - but without any content. If you select play again from the skin, the next slide is displayed.
I have searched forum, etc., but can't find a solution -- I need to re-create this scenario for several other modules too. Thanks in "Advance" for help!
G

About your second question, think you are using the wrong system variable. It is hard to read, but I think you use cpQuizInfoQuizPassPercent, which is the percentage required for passing. And you should have used cpInfoPercentage, which is the percentage acquired by the learner. Have a look at my blog post about system variables:
http://blog.lilybiri.com/system-variables-in-captivate-6
But I don't think you need such an action for Quiz Preferences? Because you have two possible actions there: Success action and Failure action? Why need an advanced acton for a simple Jump?
As for the score slide: Quiz Preferences, Settings: click the button Quiz Result Messages under Show score slide and you'll be able to mark the fields you want to show.
You can also create a custom score slide:
http://blog.lilybiri.com/question-question-slides-in-captivate
http://blog.lilybiri.com/intermediate-score-slides
Lilybiri

Quiz Retake Button - Only Show Question Slides

I currently have courses with quiz question slides at different places throughout.
Example:
Slide 1
Slide 2
Quiz Question 1
Slide 4
Slide 5
Slide 6
Slide 7
Quiz Question 2
Slide 8
Slide 9
Quiz Question 3
etc...
I have the Retake Quiz button on the results slide if a user fails the quiz. Is there any way to have the Retake Quiz button show ONLY the Quiz Questions slides, not the content slides in between? Currently, when the user clicks the Retake Quiz button, it directs them to the first quiz slide (Quiz Question 1), but after answering, the course continues to the content slides (Slide 4, Slide 5, etc...) before it reaches the next quiz question. Since the quiz slides are not directly consecutive, can the Review Quiz button be programmed to only show quiz question slides?

Hi there,
You can do this using advanced actions and user variables.
you can create your own variable and apply a default value of 0.
On exiting the normal slide assign that variable with the value of 1 or if you have a button on that slide then you can apply action on that button.
and on enter of the slide you can apply a conditional action.
to check the value of that variable if it is equal to 1 then go to next slide, else continue.
Please check the forum thread: http://forums.adobe.com/message/5156629
Thanks.

Quiz Skip Button Jump to Another Slide that is not Next slide.

Is it possible to make the Quiz Skip button jump to another slide besides the next slide? I'm using Captivate 7.
Basically, I want the quiz slide to exit to another slide that is not the next slide.

Branch aware is a totally different thing: it makes the quizzing variables dynamically adapting to the questions that are taken by the trainee.
You are talking about the Skip button, which is puzzling because that button label was changed to Next since version 6. And Branch aware only appeared in 6. Which version are you using? You are talking about shapes so it must be 6 or later.
Another question: do you allow Review? Because in that case you'll need that Next (Skip) button. http://blog.lilybiri.com/question-question-slides-in-captivate
You are talking about a 'custom Skip button'? Can you explain, and also what you mean by the rollover shape? If you have a custom button it should be visible on the timeline of the slide, contrary to the default objects on question slides that are embedded and have no separate timeline. Or was the question master slide edited to add a rollover shape to the default Next button?
Lilybiri

Quiz Timer Not Jumping to Score Slide for Submit All Quiz

I've followed the instructions for the TimeCheck advanced action posted by Lilybiri (http://lilybiri.posterous.com/timer-widget-to-stress-your-learners), but it doesn't work for me. Am wondering if it is because I am doing something wrong or because I have the Submit All option selected in the Quiz Preferences. Any ideas?
My goal is to have a countdown timer for a quiz that automatically jumps to the score slide when the time expires.

Hi,
It will not be functional anymore, because I checked and the variable associated with the Timer widget is not updated anymore. Moreover, one is limited in characters used for the variable., underscores are not possible anymore, variable always starts with a capital etc. I do not know what has changed in this widget, have been asking for an explanation but got no answer yet. For the moment the Timer widget is pretty useless if you want to do an action based on the value of the variable. I'm very sorry and should even check all posts about widgets (there are quite a lot there) to see if other similar problems occur.
My blog proves with the example and the screenshots that this work flow has been possible in the past. No tricks there.
Lilybiri

Can we remove the Continue button from Quiz Results?

Hi Everyone,
Is there any way to remove the continue button from the Quiz Results page?
I have a captivate file in which there is a Thank you slide at the end after the Quiz results slide. Now, here's the problem - The user is just finishing the quiz and closing the browser tab - which is not showing the completion status inside LMS. The user must need to view the Thank you slide - so that the LMS can respond as "Completed" status.
Now, I want to remove the Continue button on Quizzes result slide so that user doesnot need to go ahead to next slide to complete the course. And i will put the Thank You message here in Quizzes result slide only.
Can I remove the continue button from the Quiz Results page so that it can be the last slide?
Regards
Vikas Sharma

Removing the Continue button from the Quiz Results slide is NOT a good idea in my experience. Clicking the Continue button triggers functions in Captivate to terminate the quiz and commit the score to the LMS. If this button is not clicked, Captivate may not be sure the person has decided they're done with the quiz and wants their score to be captured by the LMS at that point. There are often other buttons on the Quiz Results slide to offer the user the option of Retaking or Reviewing the Quiz. Only the Continue button is designed to take them further beyond the Quiz Result slide.
Like yourself, I have also found learners often fail to grasp the importance of the Continue button and don't realise they need to do something extra (beyond reaching the Quiz Results slide) in order for their score to be captured. So what I usually do is rename the Continue button to something more meaningful such as: Register Your Score, or Record Quiz Results Now. Having a name like this (and making the button nice and large and bold so that it's not easy to miss) clearly tells people that they need to click this button if they want their score to be retained. It's just a simple change, but it practically eliminated all issues we had with people just closing down their browser when they saw the Quiz Results.

Multiple Feedback Messages in Quiz Results

Hello Everyone,
I am sure I have seen the answer here somewhere, but I cannot find it now.
So, here is my situation.... I am using Captivate 5.5
I have a 30 question quiz that covers 5 different topics. I want the results page to give feedback specific to each topic. For example:
Topic 1
You correctly answered 3 out of 5 questions. Congratulations.
Topic 2
You correctly answered 1 out of 5 questions. You need to review the module on Topic 2 before proceeding.
How do I do this?
Thanks
Paul

Do you mean that all questions are in the same file? If yes, have a look at one of my blog posts, although created for CP6, it is also valid for 5.5:
http://blog.lilybiri.com/intermediate-score-slides
Lilybiri

Cp6 Quiz score reporting error in LMS

Looking for any inputs - this one's a bit strange:
I've been tasked with developing a course that allows the learner to test-out by jumping directly to the quiz. I've set up a series of advanced actions that allow one shot at the quiz without reviewing the course content, and actions that steer the learner back into the course after failing the quiz. All of these actions work, and the quiz score reports correctly each time within the course - the problem is what happens after that:
I leave the course and go to the learner profile on the LMS - instead of 100%, the score is reporting as 75% (4 question prototype). I've set preferences to complete the course and report the score - the course reports complete, the only error is the incorrectly reported score. When I leave the transcript page and go back to the course, the course opens to the last question in the quiz, rather than the last page visited - and the question is not completed. Is this a setting I'm missing on the Cp6 side, or do I need to interface with the IT guys running the LMS? I'm running Cp6 with the most current patches on a Meridian LMS.
Justenuf

In answer to Rod's suggestion to set the score to percentage:
Done - the client prefers that report anyway. Still seeing the stuff as described below.
In answer to Erik's questions above:
after the quiz, you have a quiz results screen that shows all the information you'd expect, right?
Right - the quiz results screen in the course shows the score achieved
If they passed, how do they close the lesson?
The "Continue" button on the results screen is set up to take them to a completion page. that page has an "exit" button that takes them out of the lesson and back to the LMS.
Does the LMS report the same result as the summary page?
Yes if the quiz is set up to "submit all" answers at once in Quiz:Settings. (However, this is not my client's preferred set-up - so I'm still searching for the answers below)
No if you have the quiz submit each answer individually - see below:
The scores reported on the results screens for the quizzes in the red box above were 100, 90, 80 and 80, respectively.
If they fail the lesson, how are they redirected back to the content?
The "Continue" button on the quiz results page is set up to jump to the first page of content if the score is below passing.
Then they go through the content?
Yes - its required at that point.
how do they retake the quiz?
the "next" button on the last content slide takes them directly to the quiz.
If they retake it, does the summary slide show the correct information?
In the "submit all" mode - this all works perfectly.
If set up to submit after each answer, if you fail the quiz and exit the course before retaking it, the score is reported correctly in the transcript - it seems as if it defaults to the minimum passing score in when you submit each answer individually.
again, how do they then proceed to close the lesson?
They exit the lesson using the "Exit" button, which closes it and takes them back to the LMS.
I'd suggest adding a 'continue' button to that summary slide (if there's not one already) and instruct the user to click, take them to a 'congratulations' page and instructions to now close the lesson.
Done - see above.
Do you have the lesson reporting 'after every slide' or 'send data at end'? If none of the above options help, try changing it from one to the other (in the 'template' options).
I've set it using the submit all checkbox in Quiz:Settings - not sure how to access template options - is this a menu I'm unable to find?
Thanks again for your time on this -
Justenuf

Provide feedback button in quiz score slide

Similar Messages

Maybe you are looking for