Provide Information

Good day Experts,
I am working as a System Admin for Hyperion. I am interested in learning
1. How to write Business Rules?
2. How to Generate reports from Scratch???
3. How to Metadata import consolidation.. etc?
4. How to Perform FDQM task like.. importing data into HFM...
Please advise is there any kind of documents are there to learn this or any kind of course is there????
and also let me know about essbase , planning and analyzer? how they will be used and any doc regarding this... as i am not familiar with this and interested to learn and work on this....
your quick response is most appreciated.
Thanks in Advance....

Go though the following link you will find the entire documentation on oacle products.
http://www.oracle.com/technology/documentation/index.html
Hope this helps.
Nick
Edited by: user8989360 on Feb 17, 2010 6:45 PM

Similar Messages

Win8.1 - Error when using traceview "PDB file does not contain provider information"

We have been attempting to manage a Windows 8.1 machine by using the Enterprise Device Management Protocol.
We are encountering a failure during the process and would like to inspect what is going wrong on the Client Side. Used the “Windows 8.1 Enterprise device Management Protocol” guide that was published by Microsoft.
The guide suggests that for capturing and viewing logs generated by the built-in management agent and its components you will need access to the traceview.exe utility and the debug symbol files (.pdb) for the Windows build running on the device.It says that
we can enable advanced logging by adding the following keyvalue to the registry.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\MDM\Debug Settings]
"EnableSyncmlLogging"=dword:00000001
Start the traceview.exe utility from an elevated command prompt and add the following providers:
mdmagent.pdb
mdmappprov.pdb
mdmsettingsprov.pdb
Start the log capture and execute the scenario.
We have been having problems with adding the providers. We tried both downloading the symbol files from
http://msdn.microsoft.com/en-in/windows/hardware/gg463028.aspx#Download_windows as well as pointing traceview to the Microsoft symbol server. All our attempts to add providers result in “PDB file does not contain provider information”
Machine specs: Windows 8.1 Pro – 64 bit operating System
We would be grateful if someone could help us set up logging for this scenario using traceview or any other tool/mechanism.

Hi,
About traceview issue, better to post your question to the forum for Windows WDK forum:
https://social.msdn.microsoft.com/Forums/windowsdesktop/en-US/home?forum=wdk
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn
from your interaction with us. Thank you for your understandin
Karen Hu
TechNet Community Support

"PDB file does not contain provider information" Win8.1 - Error when using traceview

We have been attempting to manage a Windows 8.1 machine by using the Enterprise Device Management Protocol.
We are encountering a failure during the process and would like to inspect what is going wrong on the Client Side. Used the “Windows 8.1 Enterprise device Management Protocol” guide that was published by Microsoft.
The guide suggests that for capturing and viewing logs generated by the built-in management agent and its components you will need access to the traceview.exe utility and the debug symbol files (.pdb) for the Windows build running on the device.It says that
we can enable advanced logging by adding the following keyvalue to the registry.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\MDM\Debug Settings]
"EnableSyncmlLogging"=dword:00000001
Start the traceview.exe utility from an elevated command prompt and add the following providers:
mdmagent.pdb
mdmappprov.pdb
mdmsettingsprov.pdb
Start the log capture and execute the scenario.
We have been having problems with adding the providers. We tried both downloading the symbol files fromhttp://msdn.microsoft.com/en-in/windows/hardware/gg463028.aspx#Download_windows
as well as pointing traceview to the Microsoft symbol server. All our attempts to add providers result in “PDB file does not contain provider information”
Machine specs: Windows 8.1 Pro – 64 bit operating System
We would be grateful if someone could help us set up logging for this scenario using traceview or any other tool/mechanism.

I've tried to create the TMF file were the provider is in located. The .PDB file will try to locate the provider in the TMF file, but it doesn't get created. I've used tracepdb.exe to make one.
I don't think Microsoft provided the provider. Instead it is looking for a .tmc file.
See the documentation for creating a tmf file.

XML Data Provider - Information

Hi!
I am using the web item "Data Provider - Information" in the WAD to get a query result in XML. When i choose view source in the explorer i can see the XML generated.
My problem is that this generated XML generates one "XML set" for the characteristics in the query and one "XML set" for the key figures in the query.
By this i mean that when i copy the xml from the "view source" file and save it as its own XML file i have to save it as one file for the Key Figures and one file for the Characteristics.
Like this(Characteristic OMaterial and KeyFiure NetValue):
<?xml version="1.0" encoding="iso-8859-1"?>
<item>
<material>12345</material>
</item>
and
<?xml version="1.0" encoding="iso-8859-1"?>
<item>
<net_value>100</net_value>
</item>
I would like the web item to generate a XML file that includes both the KeyFigures and the Characteristics.
Like this:
<?xml version="1.0" encoding="iso-8859-1"?>
<item>
<material>12345</material>
<net_value>100</net_value>
</item>
Do any of you know if/how this is possible?
Thanks,
Charlotte

Hey, sounds like you're getting pretty close. The next thing is integrating the XSLT transform into a web template. I'm actually working on a paper on this that I'll put out at some point. Anywho, here's a sample template that does the XSLT transform on load of the page... The most important thing is that the web template has property "STATELESS=X" so that any navigation you do reruns the transform. This way, you can still navigate and do BW type activities while still transforming the result set. This is very powerful and you'll be able to change or do anything using XSLT transforms. I'm even working on creating javascript functions that run these transforms to do left outer joins and inner joins based on 2 XML result sets. This way, even if data isn't modeled together, it can be presented together. I'm working through the kinks of some of these transforms. Also, I'm working to integrate stylesheet support into my transform as well. Just substitute your transform into the sample template below and it'll render an html table for the XML Query Result Set.
[code]
<HTML>

<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="SET_DATA_PROVIDER"/>
         <param name="NAME" value="DATAPROVIDER_1"/>
         <param name="DATA_PROVIDER_ID" value="ZV_STAT_CUBE_VIEW"/>
         DATA_PROVIDER:             DATAPROVIDER_1
</object>
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="SET_PROPERTIES"/>
         <param name="TEMPLATE_ID" value="ZPD_STAT_XSL_3"/>
         <param name="STATELESS" value="X"/>
         TEMPLATE PROPERTIES
</object>
<HEAD>
<META NAME="GENERATOR" Content="Microsoft DHTML Editing Control">
<TITLE>BW Web Application</TITLE>
<link href="/sap/bw/Mime/BEx/StyleSheets/BWReports.css" type="text/css" rel="stylesheet"/>
</HEAD>
<script language="JavaScript">
      function loadIt() {
        XMLQUERYVIEWDATA_1.async = false;
xsl_result_1.innerHTML = XMLQUERYVIEWDATA_1.transformNode(xsl_transform_1.documentElement);
alert(XMLQUERYVIEWDATA_1.transformNode(xsl_transform_1.documentElement));
    </script>
<body onLoad="loadIt()">
<P>
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="TABLE_1"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         ITEM:            TABLE_1
</object>
<BR>
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="XMLQUERYVIEWDATA_1"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_XML_QUERYVIEW"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         <param name="NAVIGATIONAL_STATE" value=""/>
         <param name="RESULT_SET" value="X"/>
         ITEM:            XMLQUERYVIEWDATA_1
</object>
</P>

<xml id="xsl_transform_1">
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:variable name="header">
<tr bgcolor="white"> <xsl:for-each select="//RRWS_SX_TUPLE[1]/*">
<td>
<xsl:value-of select="local-name()"/>
</td>
</xsl:for-each>
</tr>
</xsl:variable>
<xsl:template match="/">
<table bgcolor="gold" border="1">
TESTVALUE -
<tr>
<xsl:copy-of select="$header" /> <xsl:apply-templates />
</tr>
<xsl:for-each select="//RRWS_SX_TUPLE">
      <tr>
        <td><xsl:value-of select="TUPLE_ORDINAL"/></td>
          <xsl:for-each select="//RRWS_S_CELL">
          <td><xsl:value-of select="CELL_ORDINAL"></td>
          </xsl:for-each>
        <td><xsl:value-of select="TUPLE_ORDINAL"/></td>
        <td><xsl:value-of select="CHANM"/></td>
        <td><xsl:value-of select="CAPTION"/></td>
        <td><xsl:value-of select="CHAVL"/></td>
        <td><xsl:value-of select="CHAVL_EXT"/></td>
        <td><xsl:value-of select="NIOBJNM"/></td>
        <td><xsl:value-of select="TLEVEL"/></td>
        <td><xsl:value-of select="DRILLSTATE"/></td>
        <td><xsl:value-of select="OPT"/></td>
        <td><xsl:value-of select="SIGN"/></td>
        <td><xsl:value-of select="ATTRIBUTES"/></td>
      </tr>
<xsl:for-each select="//RRWS_S_CELL">
     <tr>
        <td><xsl:value-of select="CELL_ORDINAL"/></td>
        <td><xsl:value-of select="VALUE"/></td>
        <td><xsl:value-of select="FORMATTED_VALUE"/></td>
        <td><xsl:value-of select="VALUE_TYPE"/></td>
        <td><xsl:value-of select="CURRENCY"/></td>
        <td><xsl:value-of select="UNIT"/></td>
        <td><xsl:value-of select="MWKZ"/></td>
        <td><xsl:value-of select="NUM_SCALE"/></td>
        <td><xsl:value-of select="NUM_PREC"/></td>
        <td><xsl:value-of select="CELL_STATUS"/></td>
        <td><xsl:value-of select="BACK_COLOR"/></td>
     </tr>
</xsl:for-each>
</table>
</xsl:template>
<xsl:template match="RRWS_S_CELL/*">
<td> <xsl:value-of select="." /> </td>
</xsl:template></xsl:stylesheet>
</xml>
<table>
<tr><td valign="top"><div id="xsl_result_1"></div></td></tr>
</table>
</body>
</HTML>
[/code]

Provide information about handling units

Plz provide information about handling units. Explain all the paths and information about HU.

Hi,
Purpose
You can use Handling Unit Management (HUM) to reflect packing-based logistics structures in the SAP System. Using this method, you track the movements of entire handling units and the materials they contain rather than tracking each material individually.
When you base logistics processes on handling units, goods movements processing is made easier, which in turn optimizes all logistics operations. This simplified processing includes the existing packing function in shipping and warehouse processing in the Warehouse Management system, which is expanded here.
Features
In the system, the handling unit (HU) expands on the shipping unit. Handling units can be nested, which means that you can create new handling units from several handling units as often as you like. At the material item level, HUs contain the complete material identification, the quantity, and, in the case of serial numbers, the respective object list. Handling units have unique, scannable identification numbers that can be developed according to standards such as EAN 128 or SSCC.
Handling units contain all inventory management information of the materials they contain that are maintained in Inventory Management. There are also status messages that you can call up at any time that indicate whether a handling unit is only planned or if the ship-to party has been notified of the arrival of this handling unit, or whether it is in the warehouse or has already been posted to goods issue. The integrated history function also records each business process in the life cycle of each handling unit, meaning that you can track the handling units path and development at any time.
In HU-managed storage locations, all goods movements are executed through the specification of the respective HUs, and Inventory Management is performed through the handling units. If you are not working with HU-managed storage locations, you can use handling units (without stock information) as before in the delivery and in the shipment.
In HU-managed storage locations, materials can be managed in HUs only. Mixed stock (stock made up of packed and non-packed materials within the same storage location) is not supported. HUs can also be managed in interim storage types. Unpacking a material from an HU means that the stock of the material is posted to a storage location that is not HU-managed.
If you call up normal material movements in connection with an HU-managed storage location, a delivery is created, rather than a direct material posting, which has been the procedure up to this point.
Handling units are unique at client level in at least one system. Using an indicator at client level (see Unique Identification of Handling Units), you can control whether you are going to work with the HU functions. Since the handling unit is a physical unit, the central logistics processes are controlled through the input of the handling unit identification. These processes include putaway, picking, and stock transfers, as well as goods receipts and goods issues.
A handling units mobility can be limited if quality checks are active. Changes in the stock category caused by a quality inspection are made using a posting change in the handling unit.
There is also a report available that you can use to find and display handling units using different selection criteria such as material, packing instruction, or storage location.
Although the handling unit is basically a unit that remains constant in the system, you can change it by repacking the materials it contains. All the packing functions, such as packing, repacking, and unpacking, are completely supported by the handling unit function. In this way, handling units can be created in production, during goods receipt, or in the packing areas of the warehouse. If you have automatic packing, the handling unit is created from the packing proposals defined in the system (from the packing instructions, for example).
Regards
Adarsh Mathur

Update table which provide information about NAT feature support in Catalyst switches?

Hi,
I'm searching an update table which provide information about NAT feature support in Catalyst switches.
I would like to know if the Nexus 7000 support NAT but my table below is too old -> Updated: Apr 05, 2006.
From my research, it's not possible but i'm looking for an official documentation.
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a008011c629.shtml
Thanks in advance
François

Hi,
No support of NAT on N7ks, see this posthttps://supportforums.cisco.com/thread/2045647
Your table is the latest one I know of so you'll have to look at the switches datasheets to really know but I highly doubt that newer switches not in the table support this feature.
Regards
Alain
Don't forget to rate helpful posts.

I would like to create a form that gives the user opportunities to provide information on as many as 50 projects. Does Adobe FormsCentral allow for this "expandable" type of form, such that if someone only has 10 projects, they can complete the form as ea

I would like to create a form that gives the user opportunities to provide information on as many as 50 projects. Does Adobe FormsCentral allow for this "expandable" type of form, such that if someone only has 10 projects, they can complete the form as easily as someone with 50 projects. In other words, is there a way to make the form "expandable?"

Hi Ms Buckner,
Yes, you can do this with the Show/Hide "Skip" logic rules.
1. Suppose, for example, you have your first ten projects showing by default.
2. At the end of those fields, you would have a Yes/No question asking if the person wanted to add more projects.
3. If they answer "No", they move on to the next section/area/question/etc.
4. If they answer "Yes" you have the form display ten more project fields that you had already included, but you had hidden up to this point.
5. Repeat steps two, three, and four as often as needed. (It helps that you can copy and paste fields, including groups of questions, so you don't have to manually re-create them each time.)
It means you must anticipate the maximum number of times you want to provide project fields, but you've already done that, and you have to build the form with that maximum number, but only display smaller portions at a time until they have filled in all they need.
I hope that helps,
Brian

TS1702 Playing at Frontline Commando game. Items to be able to give my credit card number I wanted to get 100 gold. My credit card was discontinued but the money did not come to my show gold. I would ask you to provide information with the need. Player-by

Playing at Frontline Commando game. Items to be able to give my credit card number I wanted to get 100 gold. My credit card was discontinued but the money did not come to my show gold. I would ask you to provide information with the need.
<Personal Information Edited by Host>

To Contact iTunes Support and request assistance Click Here

How to find out the provider information of a cell phone (from deceased relative)

Hello all!
I have an odd sort of question that I am hoping for some help on. My wife's uncle recently passed away and we are now in possession of his old cell phone. He was slightly estranged from the family and didn't share a lot of information so we currently have no idea whether this phone is prepaid or if it uses a service provider. We would like to find out who the provider is, if there is one, so that we can cancel service, but are not sure how to go about doing this. We have been unable to find any information on his phone as of yet. Is there any way that this information can be found?
Thank you so much for the help!

http://http://www.peoplesmart.com/phone
Enter the number, the next screen will show the provider.
Other option, just call *611 from the phone

Technical Content Cube for Multi Provider Information???

Hi all,
Can anyone suggest which Technical Content Cube will give Information about Multi Provider and its underlying Info Providers(Last load tiem of Info Provider)?.
Thanks
Deepika

Hi,
We have tables which gives the information about that, if u want u can create a view on these tables in RSO2 in BW and load the data to the Zcube.
Below are the tables.
RSDCUBE - Directory of InfoCubes
RSDCUBEIOBJ - Objects per InfoCube (where-used list)
RSDDIMEIOBJ -
RSDCUBEMULTI -InfoCubes involved in a MultiCube
RSDICMULTIIOBJ - MultiProvider Selection/ Identification of InfoObjects
Sorry for the post its my misunderstanding....
For bw statistics the above post will help u....
Khaja
Edited by: khaja on Feb 25, 2008 12:46 PM

RSS feed just providing information about security updates & new versions of firefox

Hey all
Didn't find any RSS feed which provides just information about new security udpates and versions of firefox.
Does there exist any?
Thanks for you help
Greetings,
Stefan

http://blog.mozilla.com/feed/

How can I provide information in which llb a vi is located?

Hi,
I have several llb's with many vi's supporting my application. On my development computer, LabVIEW "knows" which vi is located in which llb and finds them automatically. When I copy all these llb's to another computer and open a vi which needs vi's from other llb's, LabVIEW asks for the location of these vi's. Saving the vi's afterwards will store the location information, but for somebody who doesn't know the contents of all the llb's it's a frustrating task to search for the right location first. Is there a way to take over information in which llb each vi is located? I don't want to use one large llb only.
Thanks in advance,
best regards,
Gabs

If you are still in the development stage you can either put your libraries in 'user.lib' or go to Tools>Options>Paths>VI Search Path> and add your directory of libraries with a \* at the end (NB. You need to unselect 'Use default' first).
I think this should work - let me know if not please.
Kim
NB. The above is based on LV 6.0

My Firefox system seems to automatically use a town to provide information those automatic banner displays, but it is NOT my town. How do I set or reset this feature to be my hommetown versus another?

Several different advertisers seem to use an embedded setting to display a map within their banner display, however, it is not my town, but one close by.
A couple weeks ago, a Firefox window popped up, without my involvement, asking me to verify certain information on it. It seemed to be a 'general settings' window from Firefox and I noticed it had the name of the 'other' town listed in the field labeled "Your Location" (or something close to that), so I changed it to the 'correct' name of my hometown and closed the window properly.
This action caused no issues (i.e. it wasn't a Trojan virus or anything) and seemed to have cleared up the incorrect banner maps, maybe as I didn't pay too close attention recently. However, today I again noticed the system using the 'other' town's name when displaying those banner map ads.
How can I set/reset this setting to the name of my correct 'home'town?

You can automatically save downloads without seeing the Open/Save/Cancel dialog in the Options:
orange Firefox button (or Tools menu) > Options > General > "Saves files to"
However, I can't think of a way to have the Open/Save/Cancel dialog always default to Save. I think mine suggests whatever I did last for the same type of content, but I haven't paid close attention.
I'm out of time to address the problem with "do this automatically" but there is one suggestion for why it could be grayed out in this article: [[Change what Firefox does when you click on or download a file]].
Is it possible you had a download-related extension before? To compare settings and extensions, please retain the Old Firefox Data folder on your desktop. Aside from checking the extensions in there, it would be interesting to run a text file comparison on your currently active prefs.js file and your old one in that folder.

Tables that provide information on infoproviders

HI ,
I need a table in BW/BI system which must have details of the infoproviders
1) How often they are loaded ?
2) whether been used in reports?
It is OK if the information is spread across multiple tables
Thanks

Hi
For Infoobjects
InfoObject
RSDIOBJ     Directory of all InfoObjects
RSDIOBJT   Texts of InfoObjects
RSDIOBJ   Directory of all InfoObjects
RSDIOBJT Texts of InfoObjects
RSDATRNAV Navigation Attributes
RSDATRNAVT Navigation Attributes
RSDBCHATR Master Data Attributes
RSDCHABAS Basic Characteristics (for Characteristics,Time Characteristics, and Units)
RSDCHA
Characteristics Catalog
RSDDPA
Data Package Characteristic
RSDIOBJCMP
Dependencies of InfoObjects
RSKYF
Key Figures
RSDTIM
Time Characteristics
RSDUNI
Units
For InfoCube
RSDCUBE Directory of InfoCubes
RSDCUBET Texts on InfoCubes
RSDCUBEIOBJ Objects per InfoCube (where-used list)
RSDDIME Directory of Dimensions
RSDDIMET Texts on Dimensions
RSDDIMEIOBJ InfoObjects for each Dimension (Where-Used List)
RSDCUBEMULTI InfoCubes involved in a MultiCube
RSDICMULTIIOBJ MultiProvider: Selection/Identification of InfoObjects
RSDICHAPRO Characteristic Properties Specific to an InfoCube
RSDIKYFPRO Flag Properties Specific to an InfoCube
RSDICVALIOBJ InfoObjects of the Stock Validity Table for the InfoCube
ODS Object
RSDODSO Directory of all ODS Objects
RSDODSOT Texts of all ODS Objects
RSDODSOIOBJ InfoObjects of ODS Objects ODSOATRNAV Navigation Attributes for ODS Object
RSDODSOTABL Directory of all ODS Object Tables
Hope this helps
Regard
Shilpa

Hlep me out on providing information on BSI

Hi Gurus,
Please provied me information about BSI like 1) wether we need to take licence from BSI to connect to our SAP.
2) do we need to install BSI in SAP R/3
3) how to send the information to BSI for calculating taxes for my employee and what information we need to send like gross....
4) what information or details we get from the BSI after calcultaing the taxes like do we get the next salary or amount of tax that need to be deducted etc...
5) and where the data that we received from BSI will be stored.
6) do we need to maintain any infotypes from BSI.
Please help me out.

Hi,
1. BSI license comes with SAP now.
for rest check this link -
<a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/d8/c9e93401bdee06e10000009b38f83b/frameset.htm">BSI</a>
This is the added information -
USTax Engine
This Engine processes regular, supplemental, cumulative, etc. taxes for all federal, states, possessions and localities. A detailed description of the Engine's tax coverage follows:
Federal Tax Coverage     State Tax Coverage
     Withholding Tax
     all required marital statuses
     all preferred and alternate calculation methods
     cumulative
     5 supplemental methods
     Employer Unemployment (FUTA)
     Employer and Employee Social Security
     3 calculation methods
     Employer and Employee Medicare
     3 calculation methods
     Advanced Earned Income Credit (EIC)
     all appropriate EIC statuses
     Railroad Retirement
     all Employee Social Security
     all Employer Social Security
     all Employee Medicare
     all Employer Medicare
     all Unemployment and Supplemental annuity           All Withholding Taxes
     all required marital statuses
     all preferred and alternate calculation methods
     cumulative
     10 supplemental methods
     all miscellaneous taxes
     All Occupation Taxes
     all miscellaneous taxes
     All Employer and Employee Unemployment Taxes (SUI)
     2 calculation methods
     all miscellaneous taxes
     All Employer and Employee Disability Taxes(SDI)
     2 calculation methods
Local Tax Coverage     Possession Tax Coverage
     All County and City Withholding Taxes
     all required marital statuses
     all resident and nonresident formulas
     All City, Borough, Township, Village and Municipal Taxes
     all resident and nonresident formulas
     all maximums covered as required
     All Occupation Privilege Taxes
     all minimums covered as required
     All Payroll Head Taxes
     all maximums covered as required
     All School District Taxes
     All Transportation District Taxes           All withholding Taxes
     all required marital statuses
     all supplemental methods
     all miscellaneous taxes
     all preferred and alternate calculation methods
     All Employer Unemployment Taxes
     2 calculation methods
     All Employee Disability Taxes
     3 calculation methods
     All Employer Disability Taxes
     3 calculation methods
The USTaxEngine comes with complete override capabilities to cover your special needs.
This Engine has many other capabilities, too. Tax rates may be overridden with your tax rates. Entire regular, supplement and/or other tax formulas may be overridden with one or more tax formulas of your own. Your override formulas may be used for:
     the entire organization
     one or more companies
     one or more departments
     one or more employees
     and more
This gives you the flexibility to use your own override formula for all employees or for specific ones, and the BSI formulas for all others.
The Engine allows you to use override data to make adjustments for employees whose taxes have been overwithheld or underwithheld. Employee taxes may be adjusted over any period of time, which lets   underwithheld employees catch up gradually and avoid a large one-time adjustment. Custom tax capabilities for taxes you might need (such as Barbados taxes) are also included. An unlimited number of such custom taxes may be added.
ReciprocalTax Engine
This Engine processes all types of reciprocal taxes for any combinations of states, possessions and localities.
The ReciprocalTaxEngine recognizes all official (formal) reciprocal agreements that exist for taxing authorities, including those between
     two states
     a state and a county or city, or
     two counties and/or cities
In addition, the ReciprocalTaxEngine recognizes all official reciprocal agreements that exist for every other possible combination of state, possession, county and city. The Engine calculates all appropriate taxes in accordance with these agreements. It also computes all reportable wages.
In the absence of official reciprocal agreements, the Engine figures all appropriate offsets (credits) and applies them to the resident state tax. In addition to resident state offsets, the Engine calculates all tax offsets for all possessions, counties and cities, where appropriate, and applies them as required by law.
The software computes all wage offsets and reportable wages too. In addition to official reciprocal agreements and offsets, the ReciprocalTaxEngine recognizes all other types of relationships and calculates taxes and reportable wages accordingly.
The number of work taxing authorities that may be processed for an employee is limited only by what is practical. The Engine will process any number of work states, possessions, counties and cities for an employee.
By far the most comprehensive available anywhere, the ReciprocalTaxEngine can recognize any of the mind-boggling tens of millions of possible state, possession, county and city combinations, and then calculate the appropriate taxes and reportable wages.
Note: The ReciprocalTax engine was added to the PayrollTaxes application at no additional cost to our customers, increasing their value.
Regards,
Amit
Reward all helpful replies.

Provide Information

Similar Messages

Maybe you are looking for