Provide scal setting for Graphs in 9i Reports

I have embedded a Graph in Reports 9i.
Even afte i provided the Scale parameter as
Minimum = 0.00
Maximum = 50,0000
Increament = 10,0000
The Y-axis scale is diaplayed as 10k, 20k, 30k
i want to disply the scale as 10000 ,20000, 30000 How it is pssible ?

Hi,
in the FQA-Document for Graphs on OTN (http://www.oracle.com/technology/products/reports/htdocs/faq/graph_faq_with_style.html) there's the same question (By default the Y-axis scale in my graph reads as 1K, 2K... Can I modify the scale to read 1000, 2000...? ) with the answer.
regards
Rainer

Similar Messages

Can I have automatic e-mail setting for ADDM and AWR reports??

Can I have Automatic e-mail settings for all my AWR and ADDM reports so I don;t have to run the reports all the time but they can be sent over to my mailbox and I can review them, if at all I can do that then can I bound them to a particular time frame where I can recieve only those reports durin the peak usage of my database.
thanks

Hi Rohan,
Can I have Automatic e-mail settings for all my AWR and ADDM reports so I don;t have to run the reports all the time but they can be sent over to my mailbox and I can review them,You bet! I do it for all of my databases:
1 - Use a cron (or preferably dbms_scheduler) to schedule the awrrpt.sql execution, directing the report to a fixed file location (e.g. /tmp).
2 - As step 2 from the scheduled task, direct the report as input to sendmail:
For Windows:
http://www.dba-oracle.com/t_e_mail_interface_windows.htm
For Linux:
http://www.dba-oracle.com/t_email_mailing_messages_plsql.htm
For complete details of job scheduling, see Dr. Hall's book "Oracle Job Scheduling":
http://www.rampant-books.com/book_2005_1_scheduling.htm
Hope this helps. . . .
Donald K. Burleson
Oracle Press author

Temp folder was not set for RTFStringbuffer Error

Hi,
We are using CR XI 11.0.0.895 and CR XI JRC is been used to generate the reports in PDF and RTF format.
While generating report of more than 1000 pages in RTF format throws the below mentioned exception
temp folder was not set for RTFStringbuffer
However, Generating reports in PDF format generates the report.
Find below the environment details which would helpful for the analysis.
CR XI 11.0.0.895
IE 6.0
MS-office 2003
Windows XP SP2
Reports JRC application deployed on Weblogic 8.1.4
Please suggest us a solution for this problem.
Thanks in advance.

If you run [Process Monitor|http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx], do you see any file access errors when the JRC tries creating a temp RTF file?
I think I've recommended this before, but have you tried the newest version of the JRC?
[https://boc.sdn.sap.com/node/19020]
The XI Release 1 keycode will work with it.
Sincerely,
Ted Ueda

Set x scale of wavefprm graph

Hello..............I want to set x scale of waveform graph in month name . I tried for that using Advaced editing mode and set into format sring but that shows invalid. So please give me suggetion for set x scale of waveform graph in month name.
Solved!
Go to Solution.

Hello,
The reason for your failure may be, you are not following required syntax for format string.
Try this .... Probably it should work for you.
Regards,
Devang

Re: Problem providing download link for BLOB data in apex report

Hi Don,
Your solution below worked but in the download option i only see save but not open for PDf file in the blob. Please let me know if you have any suggestion to achieve it
Thanks
Jo
Problem providing download link for BLOB data in apex report
591953 Nov 19, 2008 1:55 PM (in response to 660436)
Currently Being Moderated
Good morning,
Here is how I have solved this problem.
1. The select statement in the sql for the report should not include the BLOB column. I decided to select only 2 columns, the column that has the key and the column with the filename.
2. On the first column ( the primary key ) I put in the format statement that was simply DOWNLOAD:TABLENAME:BLOB_COLUMN:PRIMARY_KEY
This works. I believe that the Oracle error I was getting was because I was trying to apply this format statement to the actual BLOB column.
So, it appears that you can use any of the columns in the report to hold the DOWNLOAD format statement since in the format statement, you are defining the BLOB table, BLOB column and the primary key into that column.
Hope this helps,
Don.

Branched out from a years old thread.
user3003326 Don't post to old threads, please.

Change the default setting for report painter reports.

HI All
Can we change the default setting in SAP/R3 in the report painter reports for the selection screen options?
If yes,Please let me know how we can change the default settings.
Thanks in Advance
Best regards
Venu

HI
We have a report developed in the report painter for profit center accounting and we have selection screen for this report.
Few of the selection screen fields parameter are set by default and we need to change the default setting for the selection screen fields parameters.
How and where do we set or change the default parameters for the selection screen ?
Thanks in advance
Best Regards
Venugopal

Please any one provide crystal report for Location wise sales report with GP

Please any one provide crystal report for Location wise sales report with GP.Please its urgent

A report writer tool like Crystal reports is not available due to the cost involved in its licenses.Do you think that Oracle Reports is free then? It's $$$$.
You can download and test it for free, but if you want to use it in production you have to buy a license.

How do I set individual properties for a column in report layout at runtime

How do I set individual properties for a column in report layout at runtime? I need to change this based on a user's input. This is for v10g.
I need to change either the "Read from File" attribute or the "File Format" attribute for one column based on the user's input. IS this possible?
Thanks in advance!

Hi,
define 2 columns and use format triggers to show the one or the other column.
Regards
Rainer

Please provide the patch set for Oracle Enterprise Manager Grid Control 10

Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.

user12009184 wrote:
Hi,
please provide the patch set for Oracle Enterprise Manager Grid Control 10.2.0.1 and 10.2.0.5 for AIX 5.3
patch set for Oracle Enterprise Manager Grid Control for 11.2.0.2 OS AIX 5.3
Thanks,
Vishal Hande.you must obtain all patches directly from
http://support.oracle.com

How to provide formulae for the columns in report based on date column

Hi,
How can we provide formulae for the columns in report, where each column is based on another Date Column.
Can anyone suggest on this.
Thanks

Hi Manu,
I think you a logical column X on which you created another Logical Column Y.
Now you want 'Y' to be filtered based on Date Column.
1. If, my assumption is right - You can do your requirement i.e. Filtering the logical col. 'Y' on Reports.
Else,
2. See - Your Logical column 'Y' While creating log. column 'Y' make sure you use any expression builder to filter across Date column. (i.e. using any case statements or where clause).
Else,
3. Make sure your First Logical column comes from Table by default (i.e. Create the same col. in d/b so it would be your Physic col. )
Thank you.
Edited by: GRK on Jan 28, 2013 7:48 AM

Providing F4 help for a feld in alv report

Hi,
I created ALV report.......In tthat report I want to allow the user to edit the field by
providing F4 help for that field............
Is there any ways two provide that............will be appreciated.
Regards,
Naveen M.

pass the field name and db table name in the ref_fieldname and ref_tabname in fieldcatalog
check this, this will clarify your doubt.
type-POOLs : slis.
data : BEGIN OF gt_vb OCCURS 0,
         auart type auart,
       END OF gt_vb.
DATA : gt_vbak type STANDARD TABLE OF vbak,
       gt_fcat TYPE slis_t_fieldcat_alv,
       gs_fcat TYPE slis_fieldcat_alv.
SELECT auart from vbak into TABLE gt_vb UP TO 50 ROWS."gt_vbak UP TO 50 ROWS.
gs_fcat-col_pos = 1.
gs_fcat-fieldname = 'AUART'.
gs_fcat-ref_fieldname = 'AUART'.
gs_fcat-ref_tabname = 'VBAK'.
APPEND gs_fcat to gt_fcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = sy-repid
   IT_FIELDCAT                       = gt_fcat
TABLES
    t_outtab                          = gt_vb
EXCEPTIONS
   PROGRAM_ERROR                     = 1
   OTHERS                            = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Edited by: soumya prakash mishra on Aug 17, 2009 10:54 AM

Need to call SET ROLE for Oracle before running report

Hi all,
does anyone know how I can call SET ROLE for Oracle with Crystal Reports, before running report? I'm using Crystal Reports 2008 to design report (with Server Oracle connection) and Java Reporting Component to run report within a J2EE apllication. If anyone has any idea, I'd greatly appreciate as I'm in trouble.
Thanks a lot.

Just a thought...
If your report's datasource was an Oracle stored procedure, you could call a function to set the role from that SP
You would be in the same Oracle session from Report --> SP --> Function, so the role would be retained

Setting up default value for POV in Financial Reporting Studio

hello
We need to Set up default value for POV in Financial Reporting Studio. For example, we need period to pick up Sep as default value when we run the report.
Is there any way we could do this???
Regards
Neha

Hi Neha,
Yes, there is a way to setup of your grid POV. Take a look at this: http://download.oracle.com/docs/cd/E12825_01/epm.111/fr_user/127.html
Cheers,
Mehmet
p.s. Please mark the answers helpful or correct, if they've helped you or answered your question. Thanks!

AutoCommit Setting for the Microsft OleDB Provider for Oracle(MSDAORA)

Hi,
The default setting for the AutoCommit(MSDAORA) is "On". can any one please tell me how to set this Off.
thanks

To use 32 bit oraoledb, you'll need to set IIS to run in 32 bit mode.
Or, install 64 bit oledb/client instead.
Hope it helps,
Greg

How to include Barcharts/graphs in alv report

Hi,
I need to create a graph with the help of ALV Grid control. I could able to activate the graphical option through clicking the 'GRAPH' icon in the ALV display.
But i am in need of changing the properties of graph(chart type / gridlines / chart options etc.,) display and also it have to be displayed automatically on executing the report. More than I need the graphical output in a single page with maximized window size.
Like Sub-Total / Sorting options are possible thru REUSE_ALV_GRID_DISPLAY i am in need of activating the Graph(chart) options automatically.
Thanks in Advance

Hi Subhakar,
       Step by step procedure.
1) Create a PF status and call it, create a button for the Displaying Graph/Bar Chart.
2) In the main program include this code to handle cliking of your graph button.
3) Include the code like the below pseudo code.
data: begin of itab_graph occurs 0,
       status_text(10) type c,
       count1 type i,
       count2 type i,
       count3 type i,
      end of itab_graph.
data: begin of i_graph_opt occurs 1,
           c(80) type c,
        end of i_graph_opt
form user_command using r_ucomm like sy-ucomm
                  rs_selfield type slis_selfield.
case r_ucomm.
when '&DIS'.
      write 'P2TYPE = PI' to i_graph_opt .append i_graph_opt.
      write 'P2SCAL = X' to i_graph_opt .append i_graph_opt.
      write 'P2PCNT = X' to i_graph_opt .append i_graph_opt.
      write 'CLPALT = C' to i_graph_opt .append i_graph_opt.
      write 'P3CTYP = CO' to i_graph_opt .append i_graph_opt.
      write 'P3SCAL = X' to i_graph_opt .append i_graph_opt.
      write 'P3LINS = X' to i_graph_opt .append i_graph_opt.
      write 'TIFULL = X' to i_graph_opt .append i_graph_opt.
      write 'TISIZE = 3' to i_graph_opt .append i_graph_opt.
      write 'CLBACK = X' to i_graph_opt .append i_graph_opt.
" above few lines are options for setting the graph - customizing the view....
" Say P2TYPE = PI calls a Pie chart.
      itab_graph-status_text = 'No of Jobs'.
      itab_graph-count1 = count_1. "( may be ur totals and subtotals )
      itab_graph-count2 = count_2.
      itab_graph-count3 = count_3.
      append itab_graph.
      call function 'GRAPH_MATRIX_3D'
        exporting
          col1 = 'Text1'
          col2 = 'Text2'
          col3 = 'Text3
          titl = 'Title of graph'
        tables
          data = itab_graph
          opts = i_graph_opt.
      clear itab_graph[].
endform.
Also refer function module documentatoon for complete understanding and usage.
Thanks,
Srinivas.

Provide scal setting for Graphs in 9i Reports

Similar Messages

Maybe you are looking for