Provide stock to Vendor via 541 with reference to an Order

Dear Experts,
Kindly advise on the solution, not too familiar with MM.
We have a requirement where we provide stocks to vendor under normal Subcon PO.  The movement type we use is 541 for material transfers from our company to the vendor.  But the standard is using 541 MB1B.
Is there a standard way where the stock transfers to vendor can use an Order for reference?  This is because we want this order for use as a "delivery note" for vehicle/truck dispatching.
Thank you all!

Hi,
If you are using active MRP for creation of Production Orders and PRs, then while system creates the production orders and when you maintain the routing data, there's an option to Outsource the operation to the subcontractor wherein the materials involved in the particular opearion can be used to create a PO with a PR reference which inturn has a order reference.
Check with your PP consultant to help you set this.
Regards
Shiva

Similar Messages

  • Vendor Outstanding Payment with reference to Purchase Order

    Is there any standard report to see outstanding payments for vendors? I wanted to see purchase orders no, miro no, vendor, clear amount, pending amount, clearing document etc. i tried FBL1N but i didnt get po no. there. Please Guide.

    There is no standard report which gives your requirement.  You will have to develop the report thru help of abaper or create a abap querry.

  • Transfer Stock to subcontractor with reference of Sales order

    Hi,
    Scenario:
    MTO strategy
    We have one operation is subcontracting. When we take MRP run all PurReq. & PLOrd are reference to sales order. But  when we want to transfer material to subcontractor through TCode MB1B Mvt type 541 that time system issue the following message.
    Deficit of SL Unrestricted-use 3,150 KG : 119 1002 RM
    Then we have to transfer stock reserved against sale order to unrestricted.
    Requirement:
    Can we transfer stock to subcontractor with reference to sales order.
    Pl tell me how I resolved this issue.
    Thanks & Regards
    Dhamane

    Hello....
    You can not transfer material from Sales order Stock by movement type 541 as both stocks are Special stocks &  has not recommend to transfer between two special stocks.
    For this Solution ,  Transfer posting to transfer the provided components to a new storage location (for example, 9999) by using movement type 311. This enables you to obtain an overview of those stocks that are physically located at the subcontractor. This information is particularly important when you carry out a physical inventory of the sales order stocks.
    Rajiv

  • How to transfer posting with reference to Subcontracting Order?

    Hi, Experts,
    Regarding to the SAP SCM510 handbook, in the section of subcontracting,it mentions 3 ways to post the provision of components from own company to stock for vendor:
    1.) Transfer posting with reference to subcontracting order
    2.) Monitoring of Subcontracting stock(using t-code ME2O)
    3.) Transfer posting without reference to PO(using movement tyep 541 + O)
    For the items 2 and 3, I can understand the processes but for item 1, I don't know how I can perform Transfer posting with reference to subcontracting order?  Anyone can explain me on the processes?
    Thanks in advance.
    Fanghua

    Shetty,
    Thank you for your help. I am really a new SAP learner. I wasn't aware of the transaction code MB1A, MB1B and MB1C etc. But I tried the way you mentioned, it works.
    My initial conern on this is really from the Enjoy transaction - MIGO. I tried to select the tranaction - Transfer Posting but it doesn't have Purchase Order(or subcontracting Order) as reference.
    How can I transfer posting with reference to subcontracting order in the transaction - MIGO?
    Thanks.
    Fanghua

  • Payment Posting with Reference to Purchase Order

    Dear Experts,
    I've created a Purchase Order with reference to a purchase requisition. Now I want to post MIRO with reference to this Purchase Order Number to give payment to Vendor mentioned in Purchase order. But when I going to post miro amount not coming which I mentioned in Purchase Order!!
    How can I post MIRO with reference to Purchase Order Number? Is it possible?
    Best Regards.
    Ripon

    >
    riponkp wrote:
    > Dear Experts,
    >
    > I've created a Purchase Order with reference to a purchase requisition. Now I want to post MIRO with reference to this Purchase Order Number to give payment to Vendor mentioned in Purchase order. But when I going to post miro amount not coming which I mentioned in Purchase Order!!
    >
    > How can I post MIRO with reference to Purchase Order Number? Is it possible?
    >
    > Best Regards.
    > Ripon
    Seems like you are doing MIRO before GR. If GR is done, it will pick the amounts, if GR is not done, the amounts are not picked. You enter the amounts manually with reference to PO.

  • Delivery note with reference to sales order - 0 quantity items

    Hi all,
    our system allows items with quantity 0 to be created in delivery notes with reference to sales orders.
    This happens when some items in a sales order are out of stock while others are availiable. The unavailable items are included in the delivery note, but have quantity 0.
    The requirement is to eliminate this behavior and to create delivery notes with availiable items only.
    I would be grateful for any advice how to realise this.
    Best regards, Andreas

    Make the necessary configuration i.e. Check quantity 0 field value should be maintained as B in the respective delivery item category using transaction 0VLP.
    Regards,
    GSL.

  • Error message display for PO creation with reference to internal orders

    Sir,
    While creating PO with Tcode ME21N (item category I) with reference to ' Internal Order with Funds provided (Tcode KO12), system displaying error message  when Budget is exceeded.
    But when Funds provision is not mentioned (Funds value is initial in KO12) , error message is not being given by the system during Po creation with ME21N.
    Where should I configure in img(Tcode SPRO) , so that system will throw error mesage while creating PO without Budget Provision (Funds not mentioned ) in Internal Orders.
    Regards,
    Srinivasa Murthy

    Hi Anupam,
    The error message display as follows. (when the PO Price exceeds the Planned Funds kept for internal order)
    This error comes during PO creation Process and PO can not be saved. This error message display is correct.
    Item 001 Order 600643 budget exceeded
    Message no. BP604
    Diagnosis
    In document item 001 Order 600643, budget  for fiscal year 2009 was exceeded by 99,960,000.00 INR.
    But  my question is 'when funds have not at all been mentioned for the internal order' then system has to throw the same error as mentioned above. But it is not happening. System is allowing the PO to save which is not correct.
    Regards,
    Srinivasa Murthy

  • Creation of production order with reference to sales order

    dear all guru's,
                       i m having a requirement of creating production order with ref to sales order but without changing my old strategy of make to stock.
    regards
    ujwal

    Hi,
    For the purpose of creation of production order with reference to sales order while maintaing MTS strategy you need to maintain Make to stock strategy 40 in strategy group in MRP-3 View of Material Master.
    This is the only Make-to-Stock Strategy which enables you create Production Order against both Sales order as well as Demand / PIR.
    So if your strategy group is already 40 then you need not change it.
    However if you are using any other Make-to - Stock strategy like 10, 11 etc. then it is not possible to create Production Order against Sales Order since they dont consider Sales Order in planning.So you need to change them and set strategy group as 40.
    Hope this helps.
    Revert if you have any doubt.
    Regards,
    Tejas
    Edited by: Tejas  Pujara on Sep 27, 2008 8:50 AM

  • Sales order with reference to sales order

    Hi,
       I need to create a sales order with reference another sales order using bapi CreateFromDat2.  Please note, Sales Ord. Dist. channel, Div, sold-to to of the new order are different from original order.   I gave reference order in field order_header_in-REFDOCTYPE .  I am getting following error when I perform single test " FB Call: insufficient parameters.  Can any of you tell me how to overcome this issue.  And is it possible to create an order refering to another Saler order with different Sales Ord, Dist. channel, Division, sold-to ?
    <b><REMOVED BY MODERATOR></b>
    Cheers
    Sudhaker
    Message was edited by:
            Alvaro Tejada Galindo

    There is an OSS note <a href="https://service.sap.com/sap/support/notes/370988">Note 370988 - BAPIs in SD: Creation with reference</a>
    <i><b>Symptom</b>
    This note describes the problems of the 'Create with reference' function when using BAPIs to create sales documents.
    If you are working online, you can use this function module to create a sales document with reference to an existing sales document or a billing document (for example, a debit or credit memo request) according to fixed rules. The rules for transferring information from the source document to the target document are defined in the copying control on header and item level. The creation with reference permits an item selection.
    When you use BAPIs in SD, a function of this type is not fully available. A reference is only possible for a quantity contract, so that the target quantity of the contract can be reduced by the order quantity of the sales document. Furthermore, the document flow is also updated.
    As an alternative to 'Create with reference' in Transaction VA01, two variants are provided for solving the 'Create with reference' problem in the BAPI.
          1. Create a '1:1 ' - that is, a document copy of a sales document (customer quotation, order) with 'BAPI_SALESDOCUMENT_COPY'. At this point, you cannot create the 1:1 copy of either a billing document or a delivery.
          2. Create a sales document that refers to an existing document with 'BAPISDORDER_GETDETAILEDLIST' and 'BAPI_SALESORDER_CREATEFROMDAT2'.
    <b>Other terms</b>
    BAPI_SALESDOCUMENT_COPY, BAPI_SALESORDER_CHANGE, BAPI_CUSTOMERINQUIRY_CHANGE, BAPI_CUSTOMERQUOTATION_CHANGE, BAPI_SALESORDER_CREATEFROMDAT1, BAPI_SALESORDER_CREATEFROMDAT2, BAPI_SALESORDER_CREATEFROMDATA, BAPISDORDER_GETDETAILEDLIST
    <b>Reason and Prerequisites</b>
    As of yet, no method exists for creating a sales document that refers to an existing document.
    Solution
    For solution No. 1
          1. Create the documents using the BAPI_SALESDOCUMENT_COPY function module. However, this only permits a 1:1 copy without factoring out individual items.
          2. After you have created the document copy, you can use a change BAPI to edit this copy.
    For solution No. 2
          1. Collect the data for the reference document (for example a customer quotation) with the 'BAPISDORDER_GETDETAILEDLIST' function module. In the example code, focus exclusively on the partners, items, schedule lines and conditions.
          2. Prepare the Data. Execute the 'copying control' manually. This way, you decide which values are to be transferred.
          3. Create the sales document using the 'BAPI_SALESORDER_CREATEFROMDAT2' function module by transferring the prepared data.
          4. Finally, you must remove a COMMIT WORK so that the sales document can be written into the database.
    An example of solution 2 is attached as a text file. You are allowed to select items and quantities for example, if you use input parameters. If there are no entries, then transfer 1:1 from the reference document. When you enter the 'condition type' parameter, you can determine whether conditions are copied or recalculated ('G' for transferring from the preceding document; 'B' or ' ' for re-determining, and 'C' for re-determining with transfer of the manual elements).</i>
    Sample : <a href="https://websmp108.sap-ag.de/~sapidb/012003146900000486112004E/BAPI_COPY_WITH_REF.txt">ZZ_MS_BAPI_COPY</a>
    Regards

  • Can we create outbound delivery with reference of purchase order

    Hi All,
    can we create outbound delivery with reference of purchase order?

    dear friend,
    as far as i know you can create it with the following references:
    -to sales order;
    -to STO;
    -to subcontract order;
    -to project;
    -without any ref
    are you talking about stock transport order ?
    regards,

  • Purchase order with reference to Sales Order

    Dear SAP Gurus,
    I want to create a Purchase Order with reference to sales order.
    I want to take the material in my stocks also. If i create a Purchase order with account assignment, i am able to take the inventory of that material as it is consumed at the time of GR (MIGO).
    hope you understand my requirement.
    Ashish

    Hi
    Go to SPRO->Logistic general->Tax on goods movement->India->Movement types.
    Here you will find the group of movement types check which movement types is mantained for the out side movement groups or inward movement.
    also check the Material Master in MRP view if the collective requirements (02) is mantained.
    Regards
    Sri

  • Posting with reference to pur. order only possible for integrated whse Message no. L9510

    Hi,
    I´m trying to setup a reversal for movement type 102 trough our Decentralized warehouse but without any luck.
    I have check some of the entries in customizing from the path down below, and also check some of links here on the community but still not getting anywhere
    Logistics Execution→Decentralized WMS Integration→Central Processing→Application→Define Interface to Inventory Management and Delivery-Relevant Data.
    Assign WM movement type references to IM movement types
    Delivery-Relevant Parameters for Reference Movement Type
    I could see from my our own reversal without WMS this setup is by delivery type DOG to pick the part wiht movement type:102 reference to WM.
    However I still getting the error for WMS every time I try from MIGO with reference to Phurchase order, Indbound delivery, or material document.
    Could anyone share me with some knowledge on that area.
    Looking forward to hear from you.
    Added file "picture"
    Regards
    Claus

    I sent you a solution in you topic Albert.
    Claus, again, no luck, sorry, you should always get informed about the functionalities of decentralized WM before implementing it, if you want to do a return to your vendor here's the process.
    Decentralized isn't the same thing as standard WM, there are a LOT of limitations.
    Here's the process by which you can achieve the required:
    (return delivery to vendor)
    *ERP* Set return delivery type => e.g. RL for doc.type/plant combination here:
    IMG => MM => Purchasing => Purchase Order => Returns Order
    *ERP* XK02 - In account control data, maintain customer in vendor master record for your vendor you are returning the goods to
    *ERP* XK02 - check "Return Vendor" checkbox (purchase view - control data) field is: LFM1-KZRET
    *ERP* Finally you can create the delivery using VL10B based on your PO number
    *WMS* In decentralized WMS, you will get a replica of the OB delivery, process it as usual and you are done.
    Hope it helps,
    Mihailo.

  • MIRO posting with reference to Purchase Order

    Dear Experts,
    I've created a Purchase Order with reference to a purchase requisition. Now I want to post MIRO with reference to this Purchase Order Number to give payment to Vendor mentioned in Purchase order. But when I going to post miro amount not coming which I mentioned in Purchase Order!!
    How can I post MIRO with reference to Purchase Order Number? Is it possible?
    Best Regards.
    Ripon

    As above it sounds like a GR gasn't been posted but you can still process invoice.  Just manually enter the quantity and value as per invoice.
    Note the invoice will block for payment pending the GR.
    See transaction MRBR if you want to release the invoice for payment immediately.
    Regards,
    Nick

  • STO returns with EWM Error "Posting with reference to pur. order only possi

    Hi Experts,
    We are trying to STO returns GR (161 Movement) with transaction MIGO for a EWM managed plant.
    Plant A is a EWM managed plant and Plant B is IM managed plant.
    We created a stock transfer order with "B" as supplying plant for plant "A" but with "Returns" tick in the item. (Document type UB)
    In the first step, when we try to post 161 movement with MIGO transaction, we are getting the below error
    "Posting with reference to pur. order only possible for integrated whse"
    Message no. L9510
    But the same scenario works between two IM managed plants.
    Can you please help me in resolving the issue
    Gobinathan  G

    Hi All,
    I am interested in the tail end of this process. I have activated DWM. We have received an Idoc confirming the Inbound Delivery for a Purchase Order Receipt.
    The Goods Movement Status of the Inbound delivery has changed to C but there is only a Confirmation of Service in the document flow and the Purchase Order is not receipted.
    I am unable to MIGO the PO manually.
    I guess the Inbound delivery should have posted a receipt on the PO but not sure what is missing?
    Any ideas?
    Thanks
    Lee

  • ARE-1 form with reference to Purchase Order

    Hi All,
    We are having a scenario where we need to send the ARE-1 to our vendor along with CT1. I have tried assigning the Purchase Order as reference document for creation of ARE-1 but its not working.
    Can anybody suggest the way to create ARE-1 with refernce to Purchase Order?
    Rgds,
    Antima

    Hi Rithvika,
    Yes the scenario is for merchant export. Here we are the customer and along with our purchase order, we need to send CT1 and ARE-1 to our vendor. The ARE-1 series has to be same as for our direct export, so i need to create an ARE-1 with reference to Purchase Order.
    If anybody has any idea how to do that and whether its possible in SAP then please guide me.
    Rgds,
    Antima

Maybe you are looking for