Provide the access to 3rd party in internal network? Needs some Design suggestions?

Hi Folks,
I have to provide the access to 3rd party in the internal network to repair their server...
How can we provide them the access? Needs some input as design perspective and working solution?
Thanks,
Regards,
MS

Well I would argue that if you distrust the remote user so much that you should seriously reconsider letting them work on equipment on your network at all.. Actually in that case, "watching" them during a remote desktop sharing session is actually a more secure solution as you can validate the actions they are taken are limited to those necessary to perform the tasks at hand. When I have had to work on systems in environments that were required to be secure to meet regulatory requirements, I was required to provide a step-by-step list of activities before hand and my performance of only those activities and verification of the expected outcome was done by staff of the client I was supporting.
If you want a purely network-based solution then put a temporary access list on the server's default gateway for the period during which the remote maintenance is ongoing allowing it to communicate only to/from the remote access VPN gateway.
A more sustainable setup would be to host the server in a DMZ on a private VLAN with an access list (or default setting) on the DMZ interface of the firewall that prohibits the server from initiating communication to the inside network.

Similar Messages

What is the site where I can access many 3rd party Widgets for MUSE?

What is the site where I can access many 3rd party Widgets for MUSE?

Hi
Some more
Adobe Muse Free Templates | Download Muse Themes and Widgets
MUSE RESOURCES™ | Library Widgets
RESOURCES | Adobe Muse CC
Regards

Anyone know the website for 3rd party software mentioned in PSE 6? I've lost the insert.

Anyone know the website for 3rd party software mentioned in PSE 6 package? (I lost the insert.)

No, but thanks. I'm looking not for an Adobe website, but the website of the supplier of 3rd-party software that adds 4 functions
to PSE 6. I've tried to contact Adobe, but as with so many of our leading companies, it's just not possible to get a human who
can answer a "customer service" question unless it's contained in a phone menu.

3rd party purchase for Network booked to project stock

Hi,
I have the following issue:
I've created a 3rd party for a Network with Account Assignment as N and Item category as S .After doing GR it is booked to Project Stock, where as it suppose to consume directly.
Please kindly suggest me any settings need to be done in PS otherwise it has to be taken care in MM .

Hi,
Just check if the following thread is useful for you ? Just have a look at Bhaskaran Srinivasan reply
Third party PO account&nbsp; assignment | SCN
Regards,
Amit

Can I use the charger of the iPhone of Mexico in Europe or I need some adapter?

Hellow
Can I use the charger of the iPhone of Mexico in Europe or I need some adapter?

This question comes up from time to time. YouTube and Facebook are both wrong.
There are a number of con-men who think that they can earn a quick buck from claiming that they own the copyright to Apple’s royalty-free jingles and sound effects included with the iLife applications. These are all free to use, as clearly stated in section 2.C of the iLife Software License Agreement:
“You may use the Apple and third party audio content (“Audio Content”) contained in or otherwise included with the Apple software, on a royalty-free basis, to create your own original soundtracks for your video and audio projects. You may broadcast and/or distribute your own soundtracks that were created using the Audio Content, however, individual samples, sound sets, or audio content may not be commercially or otherwise distributed on a standalone basis, nor may they be repackaged in whole or in part as audio samples, sound files, sound effects or music beds.”
http://images.apple.com/legal/sla/docs/ilife09.pdf
You should quote this (also providing the above link) when following the dispute process with YouTube.

Is it possible to extract vacacy created in Global HR or provide a link to 3rd party system on vacancy card?

Hi,
We have a client requirement either to extract vacacy created in Global HR or provide a link on vacancy card to 3rd party system ?
Regards,
Manoj

Generally integration would be done using web services, the available web services are documented in OER. I am not familiar enough with HCM functionality to comment on the specific feature, I will ask a colleague to comment.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

Creating Quotation in SAP based on the data from 3rd party sys

Hello experts,
My client is using a 3rd party system where the Quotations are created.
The Requirement is, the same quotaions have to be created in the SAP automatically.
Please advice how to achieve the above
Thanks in advance,
Chintu

Hello experts,
My client is using a 3rd party system where the Quotations are created.
The Requirement is, the same quotaions have to be created in the SAP automatically.
Please advice how to achieve the above
Thanks in advance,
Chintu

TS2580 I am attempting to use a 3rd party host to publish web site designed from I-web. The main page of the site is asking for host IP address, etc. I've got all that, except it is asking for Directory/Path. To what is this referring? Thanks!

I am attempting to publish a web site designed on i-web using a 3rd party host. The main page of my web site is asking for IP address of host, etc. I have all that, but it is asking for Directory/Path. To what is this referring?
Thanks.

The directory/path is the path to the root folder and, in most cases, should be left blank...
http://www.iwebformusicians.com/iWeb/Publish-Website.html

SAP to 3rd party: EDI and XI: Needed advantages and disadvantages

HI All,
I have a requirement to sent PO data from SAP to 3rd party Vendors.(more than 30 vendors). Client insists on using EDI.!!
I have completed the config on SAP R/3 side and IDOCS are created in SAP R/3.
Since we have XI in the landscape, I have a few questions in my mind. Appreciate if you could give you feedback on these questions:
1. Should we send data directly from SAP to 3rd party using EDI adapter and avoid XI.
2. I assume EDI adapter will automatically convert IDOC to vendor format data and vice-versa.
3. All 30+ vendors will need to access this EDI adapter system or do they all need to have a separate one installed in there landscape.
4. If we use XI, will the adapter be able to communicate to XI. If yes what is the adapter name which connects to XI.
5. All vendors need this data in a slightly different format, so will the EDI adapter do the format conversion for every vendor ?
6. Since all vendors have a diff file format needed, I want to avoid doing extensive message mapping in XI. So can the EDI adapter handle it or is ther any easy way to do this mapping.
7. If mapping is not possible, then does it mean I will have to create a separate IDOC for each vendor in R/3 ( in vendor specific format) and send that to them.
Thanks in advance.
Regards
Shirin

Hi,
1) Should we send data directly from SAP to 3rd party using EDI adapter and avoid XI.
A) For EDI integration u need to have the EDi adapters and for that u need to purchase the seeburger license and which is need to be installed on XI and after that only u can use EDi adapter with Xi.
U can not ignore XI.
2. I assume EDI adapter will automatically convert IDOC to vendor format data and vice-versa.
A) Yes but only when u purchase the seeburger license. there are other ways as well either use conversion agent or module program which convert the XML to EDI format.
3. All 30+ vendors will need to access this EDI adapter system or do they all need to have a separate one installed in there landscape.
A) U have to use the EDI adapters with Xi and configure ur scenario in XI for all the vendors.
4. If we use XI, will the adapter be able to communicate to XI. If yes what is the adapter name which connects to XI.
A) Seeburger provide As2,X400,FTP,VAn adapters for EDi integration.
5. All vendors need this data in a slightly different format, so will the EDI adapter do the format conversion for every vendor ?
A) What EDI format ur vendor receivers the data it depends upon that.
6. Since all vendors have a diff file format needed, I want to avoid doing extensive message mapping in XI. So can the EDI adapter handle it or is ther any easy way to do this mapping.
A) Mapping is the part of desing and mapping changes accroding to the business requirement and mapping rule which is provided by Functional people.
7. If mapping is not possible, then does it mean I will have to create a separate IDOC for each vendor in R/3 ( in vendor specific format) and send that to them.
A) u need to do the mapping between IDOC and EDi then only the data will be mapped with the required target EDI strcuture.
chirag

Backup and synching with a Windows Server, what 3rd party software do I need.

I have a Macbook Air. We just got a new Server, a Dell PowerEdge T420 running Windows Small Business Server 2011 CAL Suite.
I am told my Macbook Air will not Snych to backup files from a defined folder (like My Documents) and e-mail in Outlook. Mac's can't do that.
I don't believe that is true. Can anyone give me direction. Is there some 3rd party software that allows Mac to do this?

Hello Charlene,
And welcome to Apple Discussions!
There are several ways you can pull the music off your iPod and onto iTunes. The first link below provides step-by-step instructions for the direct method if you have a PC as well as a few third party applications (for both the Mac and PC) if you choose to go that route instead. You can also do a simple Google search for "copy music from iPod to computer" and you should receive a number of sites that can help you out.
Just make sure that when you have your iPod plugged into your computer, that you don't hit "Erase and Sync" before completing the task of copying your music over.
Also, if you have any purchased music, you will probably have to re-authorize your computer by heading to the Store drop down menu and choosing "Authorize computer."
[5 Ways to Copy Music OFF your iPod and onto iTunes|http://www.metaphoriclabs.com/articles/5-ways-to-copy-music-off-your-ipo d-windows-mac-os-x>
Here are a few more helpful sites.
[Copying Content from your iPod to your Computer - The Definitive Guide|http://www.ilounge.com/index.php/articles/comments/copying-music-from-ipo d-to-computer]
Or
[How to copy songs your iPod to your PC|http://lifehacker.com/software/ipod/how-to-copy-songs-from-your-ipod-to-your -pc-105256.php]
Also, here is an article for the direct method that is for both Windows Vista and XP.
http://ipodtips-tricks.blogspot.com/2008/10/howto-transfer-music-from-ipodto-itu nes.html
Hope this helps.
B-rock

I am working with Acrobat 9 Extended Pro. How do you edit 3rd party pdf files?? Some do not allow.

I've been attempting to modify a 3rd party, original form purchase agreement -- so I may complete it with answers and save in my system for future submital or more editing. The form I'm attempting to complete with my laptop .. turns blue (converts to photo storage?) and makes it impossible for me to edit.
How do I edit under Acrobat 9 Extended Pro software -- Please advise ASAP.
Paul Johnson

You could add form fields or comment annotations. If you want to modify the text directly you may need to OCR the pdf and convert it to a text or Word document, edit the text, then make a new PDF.

Stupidly partition hdd on window7 in IMAC A1311, and now I can not use the IMAC...... Need some help

Just bought a used IMAC A1311 core 2 duo, and there are something called Bootcamp and Window7 on it, and i log in to Window7 and stupidly partition hdd on it, and i think it has formatted everything. now the window7 is error and I do hold (alt) key when I start up the machines , it show only the window7 hdd and i don't see any Recoery HDD........what should i do? Really need some helps right now.........

There are several models that use A1311. So I don't know exactly what model you have. If you received installer discs with the computer, then you will need to boot from Disc 1, erase the drive, and install Snow Leopard. Some models in the A1311 line can use Internet Recovery:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Access to 3rd party email from BT Mail

I asked this question about a year ago but didn't get a satisfactory reply because the email migration was in full flow and there were lots of problems
I have a BT Mail account which I use from home. I also have a couple of business email accounts which I would like to incorporate into the BT account so when I'm at home I only have to login to one account. I have the 2 business accounts defined in BT Mail and I can view the messages. However, when I wish to reply to one of the business emails I don't get the option of sending the email as the business email address. I used to be able to do this with the Yahoo account before it changed to BT.
Any ideas how I can get this to work? I don't want to install Outlook or Thunderbird.
Thanks

licquorice wrote:
orange_dude wrote:
@licquorice Subbornness
Try a client, you'll wonder why you ever used webmail.
All your accounts in one place, no more logging in and out as the client does that for you, no more ads, no more trackers, what's not to like?
OK, you win. Which email client would you recommend & can you post a link for the download? Windows 8.1

Will Tiger support a 3rd party CDRW internal drive?

Hi all-
First post here, but lurking for a while... My new Mini will arrive tomorrow and I'll be putting my G3 into helper service on the model railroad. The G3 currently has a DVD-ROM drive. According to System Profiler it supports burning, but I've never been able to get it burn CDs (keeps asking for media to be inserted). But my old Performa has a Yamaha CDRW drive that I'd like to put in the G3. My question is whether Tiger will recognize and burn to the drive (without other software). I have the original Yamaha software, but it's for OS 8.x. I have a disc with 10.4.3 and the updates for 10.4.4 and 10.4.5, so I can put any of those versions on the G3. As an alternate, if Tiger won't work, any idea if 9.2.2 will work??? Thanks in advance.
-alex-
Mini Intel 1.66GHz, B/W G3 300 Mhz, Performa 6400 200MHz Mac OS X (10.4.5)

Patc
hBurn should make just about any drive usable.
Roger-
Thanks for that - I'll give it a try. As an FYI, the link to download from the webpage you list doesn't work. I had to go to http://www.patchburn.de/ to download it. Looks like the current version is 4.0.0a5 (4.0.0a.4 listed on webpage you mention - maybe that's why it returns an error when trying to download)...
-alex-

The BDC program for Transaction COGI not workign -need some alternative

Hi,
We are doing a SAP upgrade from 4.6c to ECC. One of the custom tcodes which were using BDC programming on COGI is now broken.Since , COGI is now changed in Ecc 6.0 with respect to the output which is now inALV and the earlier Date funtionaliy button is no more there in ECC6.0.
We are still not to able to find relevant BAPI/function module/alternative for that matter.Rerecording COGI for new environment is not working since it involves alv call functions, which cannot be recorded in BDC.
Please provide any inputs/valuable suggestions for same.

HI
You can try below method.
there is one check box in COGI transaction named List Display. In your BDC recording, default that field value with 'X'.
By activating this, list will be displayed as in earlier versions.
Regards,
Krishna Mohan

Provide the access to 3rd party in internal network? Needs some Design suggestions?

Similar Messages

Maybe you are looking for