Provider failure Exception

Hi there,
My question is, if i have a QueueReceiver and there is a failure in the JMS Provider, when i invoke the "receive" method, it will
throw an Exception, am i wrong? After that, i should try to reconnect with
my JMS Provider.
Thanks in advance.

It depends on your provider.
Some providers such as ActiveMQ can auto-reconnect to the JMS provider (or another broker in the network) automatically for you which is then invisible to your JMS client.
But if your provider does not support auto-reconnection then yes a receive() or send() method will fail.
James
http://logicblaze.com/

Similar Messages

Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5015. SQL 2012 SP1

Hi,
Please help. I was trying to remove a SQL 2012 SP1 two node clustered instance using setup (Mantenance -> Remove Node)
I started by doing this on passive node (and was successful) but when I ran setup on active node just before finishing successfully I got this error:
TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
The following error has occurred:
The resource 'BCK_SG1DB' could not be moved from cluster group 'SQL Server (SG1DB)' to cluster group 'Available Storage'.
Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5015.
Description: The operation failed because either the specified cluster node is not the owner of the resource, or the node
is not a possible owner of the resource.
For help, click:
http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE8049925%25400x42B4DED7
BUTTONS:
OK
I noticed that SG1DB instance was removed on both nodes but on Failover Cluster Manager -> Services and Applications the SQL server instance for SG1DB is still there. So I tried to delete it but got the error:
Failed to delete SQL Server SG1DB. An error was encountered while deleting the cluster service or
application SQL Server SG1DB. Could not move the resource to available storage. An error occured
while moving the resource BCK_SG1DB to the clustered service or application Available Storage
Any ideas why it failed or how could I delete the SQL server instance from Clauster?
Thx

Hello,
Please read the following resource.
https://support.microsoft.com/en-us/kb/kbview/313882?wa=wsignin1.0
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Open Tunnel Failure Exception still if there APN settings in device

Hi All,
I have writen blackberry application for BB8100,it give me "Open Tunnel failure exception", Though i have write APN Setiing in Advanced options--->Tcp
I am from india
Carrier provides :Airtel
APN:airtelgprs.com
Uname:......
Pass:......
But still m not resolved this problem if any one have resolution please give me that,its really helpfull to me.
Thanks in Advance
Deepak

thanks but i haven't been able to find a ksoap specific forum! I have posted the same question on the blackberry forums but there are so many ksoap related issues there that nobody seems able to help.
I was hoping that this issue was more a general error than a ksoap one!
Alex

Transaction Failure Exception

Hi All,
When a transaction (notification creation) is being posted, we are receiving a Transaction Failure. I have still not been able to recreate the scenario, so cannot provide the exact scenario in which it is happening.
This issue is happening only for some users in our system. Others face no issue while posting the same transaction.
I am posting the logs below and hoping that somebody will know what it can mean:
Messages.log:
I, 200, 20,   3, 05/13/2014 09:07:28,
0,   377,
, ANGEL: DDDCE6C7-FE70-4CD0-BDF2-289DD4C66857
Q, 200, 20,   3, 05/13/2014 09:07:28,
0,   377,
xxxxxxxx, ANGEL: DDDCE6C7-FE70-4CD0-BDF2-289DD4C66857
A, 200, 20,   3, 05/13/2014 09:07:28,
0,   377,
xxxxxxxx, ANGEL: DDDCE6C7-FE70-4CD0-BDF2-289DD4C66857
S, 200, 20,   3, 05/13/2014 09:07:28, 33,
3,   377,
xxxxxxxx, ANGEL: DDDCE6C7-FE70-4CD0-BDF2-289DD4C66857
Events.log:
05/13/2014 09:07:28, 1,
0,
2, Thr
6576, class ServerExternalData, d:\syclo_buildbot\bugs_6.0\syclo\refcount.h#154:RCP<class ServerExternalData>::operator ->
05/13/2014 09:07:28, 1,
24,
1, Thr
6576, Transaction Failure Exception, Fatality = -1, NotificationTitle = "XNullPointerDereference", NotificationText = ""
05/13/2014 09:07:28, 1,
0,
2, Thr
6576, d:\syclo_buildbot\bugs_6.0\syclo\refcount.h#154:RCP<class ServerExternalData>::operator ->
Java Logs:
2014/05/13 09:07:28.817: + Thread=6576
2014/05/13 09:07:28.817:   + Thread Pool=Server
2014/05/13 09:07:28.817:     + WorkFunction=000000006C58EED0
2014/05/13 09:07:28.817:       + User=xxxx
2014/05/13 09:07:28.817:         + Server=Agentry
2014/05/13 09:07:28.817:           + BackEnd=Java-1
2014/05/13 09:07:28.817:             + BackEnd=Java-1
2014/05/13 09:07:28.817:               com.syclo.sap.TransactionSession::beginTransaction::::begin
2014/05/13 09:07:28.817:             + BackEnd=Java-1
2014/05/13 09:07:28.817:               com.syclo.sap.TransactionSession::beginTransaction::::--------------------------------
Regards
Ankur Malhotra

Hi All,
When a transaction (notification creation) is being posted, we are receiving a Transaction Failure. I have still not been able to recreate the scenario, so cannot provide the exact scenario in which it is happening.
This issue is happening only for some users in our system. Others face no issue while posting the same transaction.
I am posting the logs below and hoping that somebody will know what it can mean:
Messages.log:
I, 200, 20,   3, 05/13/2014 09:07:28,
0,   377,
, ANGEL: DDDCE6C7-FE70-4CD0-BDF2-289DD4C66857
Q, 200, 20,   3, 05/13/2014 09:07:28,
0,   377,
xxxxxxxx, ANGEL: DDDCE6C7-FE70-4CD0-BDF2-289DD4C66857
A, 200, 20,   3, 05/13/2014 09:07:28,
0,   377,
xxxxxxxx, ANGEL: DDDCE6C7-FE70-4CD0-BDF2-289DD4C66857
S, 200, 20,   3, 05/13/2014 09:07:28, 33,
3,   377,
xxxxxxxx, ANGEL: DDDCE6C7-FE70-4CD0-BDF2-289DD4C66857
Events.log:
05/13/2014 09:07:28, 1,
0,
2, Thr
6576, class ServerExternalData, d:\syclo_buildbot\bugs_6.0\syclo\refcount.h#154:RCP<class ServerExternalData>::operator ->
05/13/2014 09:07:28, 1,
24,
1, Thr
6576, Transaction Failure Exception, Fatality = -1, NotificationTitle = "XNullPointerDereference", NotificationText = ""
05/13/2014 09:07:28, 1,
0,
2, Thr
6576, d:\syclo_buildbot\bugs_6.0\syclo\refcount.h#154:RCP<class ServerExternalData>::operator ->
Java Logs:
2014/05/13 09:07:28.817: + Thread=6576
2014/05/13 09:07:28.817:   + Thread Pool=Server
2014/05/13 09:07:28.817:     + WorkFunction=000000006C58EED0
2014/05/13 09:07:28.817:       + User=xxxx
2014/05/13 09:07:28.817:         + Server=Agentry
2014/05/13 09:07:28.817:           + BackEnd=Java-1
2014/05/13 09:07:28.817:             + BackEnd=Java-1
2014/05/13 09:07:28.817:               com.syclo.sap.TransactionSession::beginTransaction::::begin
2014/05/13 09:07:28.817:             + BackEnd=Java-1
2014/05/13 09:07:28.817:               com.syclo.sap.TransactionSession::beginTransaction::::--------------------------------
Regards
Ankur Malhotra

BAPI_DOCUMENT_CREATE2 throws communication failure exception

Hello to all,
I want to upload a file in WebDynpro ABAP by placing a service call to BAPI_DOCUMENT_CREATE2.
But i am getting "communication failure" exception. Request your help on this issue.
<b>(RFC Exception COMMUNICATION_FAILURE with Message RFC destination Create document does not exist. Occurred)</b>
Code for this service call is as follows :-
METHOD EXECUTE2_BAPI_DOCUMENT_CREATE2 .
DATA: ls_doc    typE bapi_doc_draw2,
      ls_return typE bapiret2.
    key fields of the document
DATA: lf_doctype    typE bapi_doc_draw2-documenttype,
      lf_docnumber typE bapi_doc_draw2-documentnumber,
      lf_docpart    typE bapi_doc_draw2-documenttype,
      lf_docversion typE bapi_doc_draw2-documenttype.
**.... Originals that are checked in simultaneously
DATA: "lt_files typE bapi_doc_files2 OCCURS 0 WITH HEADER LINE,
      lt_files type standard table of bapi_doc_files2,
      wa_lt_files like line of lt_files,
**.... Short texts
      lt_drat typE standard table of bapi_doc_drat,
      wa_lt_drat like line of lt_drat,
**.... Object links
     "lt_drad typE bapi_doc_drad OCCURS 0 WITH HEADER LINE.
     lt_drad typE standard table of bapi_doc_drad,
     wa_lt_drad like line of lt_drad.
Allocate document data
ls_doc-documenttype    = 'DRW'.
ls_doc-documentnumber = '4711'.
ls_doc-documentversion = '00'.
ls_doc-documentpart    = '000'.
ls_doc-statusextern   = 'AF'.
ls_doc-laboratory     = '001'.
Check in original 1 simultaneously in the SAP Database
REFRESH lt_files.
CLEAR lt_files.
wa_lt_files-storagecategory = 'DMS_C1_ST'.
wa_lt_files-docfile      = 'c:\original_acy.txt'.
wa_lt_files-wsapplication = 'TXT'.
APPEND wa_lt_files to lt_files.
declarations for context navigation
DATA lo_element TYPE REF TO if_wd_context_element.
DATA lt_elements TYPE wdr_context_element_set.
declarations for parameters
get all involved child nodes
get input from context
the invocation - errors are always fatal !!!
DATA lv_rfc_error   TYPE c LENGTH 120.
DATA lv_rfc_message TYPE string.
CALL FUNCTION 'BAPI_DOCUMENT_CREATE2'
    DESTINATION 'Create document'
    EXPORTING
       documentdata =                    ls_doc
"      hostname =                        wd_this->hostname
"      docbomchangenumber =              wd_this->docbomchangenumber
"      docbomvalidfrom =                 wd_this->docbomvalidfrom
"      docbomrevisionlevel =             wd_this->docbomrevisionlevel
"      cad_mode =                        wd_this->cad_mode
"      pf_ftp_dest =                     wd_this->pf_ftp_dest
      pf_http_dest =                    'SAPHTTPA'
   IMPORTING
      documenttype =                    lf_doctype
      documentnumber =                  lf_docnumber
      documentpart =                    lf_docpart
      documentversion =                 lf_docversion
      return =                          ls_return
   TABLES
"      characteristicvalues =
"      classallocations =
      documentdescriptions = lt_drat
      objectlinks = lt_drad
"      documentstructure =
      documentfiles = lt_files
"      longtexts =
"      components =
    EXCEPTIONS
      system_failure =                    1   MESSAGE    lv_rfc_error
      communication_failure =             2   MESSAGE    lv_rfc_error.
error handling
CASE sy-subrc.
    WHEN 1.
      lv_rfc_message = lv_rfc_error.
      RAISE EXCEPTION TYPE cx_wd_no_handler
        EXPORTING
          textid        = cx_wd_no_handler=>kind_rfc
          old_exception = `SYSTEM_FAILURE`
          rfc_message   = lv_rfc_message.
    WHEN 2.
      lv_rfc_message = lv_rfc_error.
      RAISE EXCEPTION TYPE cx_wd_no_handler
        EXPORTING
          textid        = cx_wd_no_handler=>kind_rfc
          old_exception = `COMMUNICATION_FAILURE`
          rfc_message   = lv_rfc_message.
ENDCASE.
store output to context
ENDMETHOD.

Hi Abhishek,
This link may be helpful for you
Re: How to upload file from Web Dynpro into R/3 (BAPI_DOCUMENT_CREATE2)
Regards
Fahad Hamsa

"'Catastrophic failure (Exception from HResult:0x8000FFF(E_UNEXPECTED))'" when updating a List item

Hi,
I am receiving the below error when I update a List item.
'Catastrophic failure (Exception from HResult:0x8000FFF(E_UNEXPECTED))'
I have enabled the Verbose logging, and below are the details of the error that I have taken from Log Files.
Application error when access /sites/exg/Lists/Applics/EditForm.aspx, Error=Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED)) at Microsoft.SharePoint.Library.SPRequestInternalClass.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bMigration, Boolean bPublish) at Microsoft.SharePoint.Library.SPRequest.AddOrUpdateItem(String bstrUrl, String bstrListName, Boolean bAdd, Boolean bSystemUpdate, Boolean bPreserveItemVersion, Boolean bUpdateNoVersion, Int32& plID, String& pbstrGuid, Guid pbstrNewDocId, Boolean bHasNewDocId, String bstrVersion, Object& pvarAttachmentNames, Object& pvarAttachmentContents, Object& pvarProperties, Boolean bCheckOut, Boolean bCheckin, Boolean bMigration, Boolean bPublish)
Kindly advise the resolution to avoid this error.
Thanks

Hi shameej,
i found a similar thread , can you plz check it?
http://social.msdn.microsoft.com/Forums/en/sharepointdevelopment/thread/2ee9e393-70f9-4ec7-b19b-f107ef204ef7
http://www.sharepointdev.net/sharepoint--development-programming/catastrophic-failure-after-itemupdatingeventhandler-66510.shtmlBest Regrads,
Ahmed Madany

I am always getting a General Failure Exception

Hello,
I have been working on a UDO form.
Recently my code is generating "General Failure" Exceptions at parts where the code worked a couple of days ago!
My add-on was working perfectly before, and I haven't changed anything in it.
It is setting a general failure exception, when i set the String property of an EditText object, and when i set a form's visible property to true.
What could be the problem?
Thanks
Ralph

Hi,
try this in C#
               /// <summary>
               /// summary
               /// <para>Sets the value of a edittext. This is because of the general failure problem, when setting edittext values directly. </para>
               /// </summary>
               /// <param name="_editText">The editText to set the value. </param>
               /// <param name="_value"The value to set.</param>
               /// <returns>Returns allways true . </returns>
               public bool setEditTextValue(EditText _editText, string _value)
                    try
                         _editText.Value = _value;
                         return true;
                    catch (Exception)
                         return true;
Have fun,
Holger

Catastrophic failure ( Exception From HRESULT:0x8000FFFF (E_UnExpected))

Received this error after installing the desktop client from Azure.
Created LS app, deployed to Azure, Installed client, received the error.
I am currently running VS2013 Update 4 and Silverlight 5 (5.1.30514.0). The client download and installs, but on execution, I get the error.
I read the article below, but to no avail.... Any ideas?
http://social.msdn.microsoft.com/Forums/vstudio/en-US/bce9d623-2985-42dc-9efc-30897fb0ea9b/catastrophic-failure-exception-from-hresult0x8000ffff-eunexpected?forum=lightswitch

I managed to resolve this. Being that the application is in beta, there is no SSL attached to it. I tweaked the config to not require encryption and it worked. I'm having another issue now...
I published an update to the same application. When I run it from my desktop, it shows the application has been updated and to run the application again. Well, everytime I run it, I get the "Updated successfuly" message and advised to run the application
again. I found a blog post regarding the same issue, but his resolution did not work for me. Here is the link: http://jandho.blogspot.com/2012/09/out-of-browser-ls-app-keeps-on-showing.html
Any help would be greatly appreciated

Catastrophic failure (Exception from HRESULT: 0x8000FFFF (E_UNEXPECTED)) in biztalk pipeline

I am working pipeline component , where I am reading stream and then promoting properties something like this . As I am using streamreader I added using statement. But when i add this I got error Reason: Catastrophic failure (Exception from HRESULT:
0x8000FFFF (E_UNEXPECTED)) . I am not understanding what it mean? If I removed using statement it works fine no issue. Can somebody explain me.
Note: I am planning to convert this code with stream pipeline later. But right now have to maintain below existing code, which I am trying to add using statement.
if (pInMsg.BodyPart != null)
if (originalStream != null)
using(StreamReader sReader = new StreamReader(originalStream))
StringBuilder sBuilder = null;
while (sReader.Peek() != -1)
sBuilder = new StringBuilder(sReader.Read());
if (sBuilder.ToString().Substring(0, 2) == "test")
string[] TCount = sBuilder.ToString().Split(SepratorChar.ToCharArray());
testCount= Convert.ToInt32(TCount [1]);
string srcFileName = Path.GetFileName(pInMsg.Context.Read("ReceivedFileName", "http://schemas.microsoft.com/BizTalk/2003/file-properties").ToString());
pInMsg.Context.Promote("EDIFileName", "https://Zones._870.EDIProperty", srcFileName);
pInMsg.Context.Promote("GE02", "https://Zones._870.EDIProperty", testCount);
//originalStream.Seek(0, SeekOrigin.Begin);
//pInMsg.BodyPart.Data = originalStream;
//outMsg = pInMsg;
//outMsg.BodyPart.Data = originalStream;
//return outMsg;
return pInMsg;

I think this synatx should solve that issue
if(BTS.LastInterchangeMessage exists MsgTransaction)
interChangeSequenceNumber = MsgTransaction(BTS.InterchangeSequenceNumber);
Sure.

Alternative explantations for "provider failure" with MS SQLServer plug-in.

I am attempting to set up the SQL Server plugin. After much messing about, I have got to the stage where the agent can connect to the sql server, but all the metric collection queries show an 0x80041004 error.
e.g.
em_error='SELECT name,sqlservername,initialsize,spaceavailable,lastbackup FROM mssql_transactionlog WHERE sqlservername ='(local)'' query execution failed. Error code = 0x80041004 em_error=An error has occured while fetching WMI data.
According to Microsoft Technet, this error number means ' WMI Provider Failure' and can occur if the user querying the WMI is a local user 'created since the WMI service was started'. There is apparently a hotfix for this, but workaround ( restart the WMI service) is not effective so I have doubts that the technet note applies to my situation.
Has anyone seen this problem and solved it?
Agent version:10.2.0.3
Windows Version: 2000 SP4
Sql Server Version: 2000 (8.00.2309)
Plugin version: 3..1.3.1.0
Message was edited by:
smitjb

Try that on command prompt:
wmiadap /f
wmiadap /resyncperf
restart 'Windows Management Instrumentation' service
And see this page on metalink https://metalink.oracle.com/metalink/plsql/f?p=130:14:5237722199786278844::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,367797.1,1,1,1,helvetica

RFC call ended with "Communication Failure" exception (Function call failed; could not find the function

Hi All,
I am getting error while executing oDATA service from SAP Netweaver Gateway
Error details:
RFC call ended with "Communication Failure" exception (Function call failed; could not find the function
I am using SAP NG 740
Project is created in Gateway system using SEGW having Map to Datasource option used.
in SPRO manage alias, I had seleted Local App option. Screen attached
I had tried all troubleshooting like delete and add service and alias in "/IWFND_MAINT_SERVICE".
but still getting same error for all service.
Kindly advise.
Regards
Vivek

Hello Vivek,
Service builder would have also generated code for RFC Exception handling to catch exceptions raised when communication fails between your GW and BE for some reasons.
Handling is done for 1. System Failure 2. Communication Failure & 3. Business Failure;
Put a BP in your DPC or DP_EXT class where exception code is written to check what exactly is has caused communication failure.
Check if that RFC is existing in that destination or not.
For your reference : Code would be something like this. Put BP here and check the problem.
* Error and exception handling
IF lv_subrc <> 0.
* Execute the RFC exception handling process
   me->/iwbep/if_sb_dpc_comm_services~rfc_exception_handling(
     EXPORTING
       iv_subrc            = lv_subrc
       iv_exp_message_text = lv_exc_msg ).
ENDIF.
Go inside this method and check to get info on what has to be done to resolve issue.
Check carefully what has gone wrong and fix it accordingly.
No need of adding service & deleting as problem is not because of that.
Regards,
Ashwin

Exchange2010 migration to Exchange 2013 federation trust failed (Outlook Provider Failure)

We are in a migration Exchange 2010 to Exchange 2013.
On the 'old' Exchange 2010 we are using a Federation Trust to 2 order company's. The federation trust for mailbox's on the exchange 2013 wont work.
We removed the federation trust on the old exchange 2010 server and create a new federation trust on the new Exchange 2013 server. We also changes the DNS TXT records. Creating the new federation trust without errors. But when the 2 order company's trying
to connect (add our company name for trust) they get a error.
A have trying to run a couple tests on the new Exchange 2013 server and found this error:
[PS] C:\Windows\system32>Test-OutlookWebServices -debug -Identity [email protected] -MailboxCredential(Get-Credential
cmdlet Get-Credential at command pipeline position 1
Supply values for the following parameters:
Credential
Source                              ServiceEndpoint
Scenario                       Result Latency
(MS)
AM111.AM.LAN                        autodiscover.company.nl            Autodiscover: Outlook
Provider Failure     144
AM111.AM.LAN                        webmail.company.nl
Exchange Web Services          Success     134
AM111.AM.LAN                        webmail.company.nl
Availability Service           Success     207
AM111.AM.LAN
Offline Address Book           Skipped       0

Hi,
Are you add primary SMTP domain as a federated domain? If not, please run below command to achieve this function:
Add-FederatedDomain -DomainName contoso.com
Configure federated sharing for the Exchange 2013 organization. Complete the steps in
Configure federated sharing.
Configure federated delegation (previous name for federated sharing) for the Exchange 2010 SP2 organization. Complete the steps in
Configure federated delegation.
Besides, I find an similar thread about Autodiscover service failed within federated trust, for your convenience:
https://social.technet.microsoft.com/Forums/ie/en-US/ea192e0a-1363-4cb6-9fc4-2973f64afc23/the-response-from-the-autodiscover-service-at?forum=exchange2010
Best Regards,
Allen Wang

"Catastrophic failure" exception on export...

Hi,
I am working on .Net application that uses CRXIR2 embedded server as a 3rd party reports application.
I am trying to run a report based on a stored procedure, and got this "catastrophic" exception:
Catastrophic failure at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.Export(CrReportExportFormatEnum exportFormat, Int32 Reserved)...
ErrorCode = -2147418113
when i run:
crystalBytes = reportClientDocument.PrintOutputController.Export(ConvertToCrysalExportFormat(format), 0);
I tried looking up this exception and error code, and all i got was somethong related to SQL server 2000.
I'm using SQL server 2008...
Also, when running other reports based on database views, the reports ran successfully..
Does anyone have an idea?...
Thank you,
Dana.

Hi,
I think I've found the problem.
I changed my stored procedure parameters, from int to bigint.
I ran the report in the designer, using the new stored proc - it worked ok.
when i run it using RAS, i first set parameter values using :
reportClientDocument.DataDefController.ParameterFieldController.SetCurrentValue("", parameter.Name, this.logId);
where logID is of long datatype.
when i change it to int, i don't get the exception.
Is it not possible to set a report parameter value to long datatype?

Cannot create notes in Apple Mail: Assertion failure, exception thrown

If I choose File > New Note, nothing happens. The console log displays the attached messages. What could be causing this?
06/04/2011 14:23:18 Mail[802] * Assertion failure in +[NoteView updateFontAndRule:], /SourceCache/Mail/Mail-1084/MessageViewer.subproj/NoteView.m:210
font-family cannot be nil
0 Message 0x00007fff854ed780 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff854ed6e5 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Mail 0x000000010009416e 0x0 + 4295573870
3 Mail 0x0000000100093e16 0x0 + 4295573014
4 CoreFoundation 0x00007fff8772c96c _invoking__ + 140
5 CoreFoundation 0x00007fff8772c83d -[NSInvocation invoke] + 141
6 Mail 0x000000010006665a 0x0 + 4295386714
7 Foundation 0x00007fff86f198ea nsnotecallback + 167
8 CoreFoundation 0x00007fff876ff000 __CFXNotificationPost + 1008
9 CoreFoundation 0x00007fff876eb578 _CFXNotificationPostNotification + 200
10 Foundation 0x00007fff86f1084e -[NSNotificationCenter postNotificationName:object:userInfo:] + 101
11 Mail 0x0000000100002a65 0x0 + 4294978149
12 WebCore 0x00007fff8610c843 _ZN7WebCore15ProgressTracker21finalProgressCompleteEv + 83
13 WebCore 0x00007fff8610c7d8 ZN7WebCore15ProgressTracker17progressCompletedEPNS5FrameE + 104
14 WebCore 0x00007fff86093e3a _ZN7WebCore11FrameLoader26recursiveCheckLoadCompleteEv + 298
15 WebCore 0x00007fff861b4567 ZN7WebCore14DocumentLoader23removeSubresourceLoaderEPNS14ResourceLoaderE + 135
16 WebCore 0x00007fff861b3a3c _ZN7WebCore17SubresourceLoader16didFinishLoadingEv + 124
17 Foundation 0x00007fff86f9a608 _NSURLConnectionDidFinishLoading + 113
18 CFNetwork 0x00007fff807741a0 ZN19URLConnectionClient23_clientDidFinishLoadingEPNS26ClientConnectionEventQueueE + 174
19 CFNetwork 0x00007fff807d99ae _ZN19URLConnectionClient26ClientConnectionEventQueue33processAllEventsAndConsum ePayloadEP20XConnectionEventInfoI12XClientEvent18XClientEventParamsEl + 254
20 CFNetwork 0x00007fff807d9c1a _ZN19URLConnectionClient26ClientConnectionEventQueue33processAllEventsAndConsum ePayloadEP20XConnectionEventInfoI12XClientEvent18XClientEventParamsEl + 874
21 CFNetwork 0x00007fff80760825 _ZN19URLConnectionClient13processEventsEv + 121
22 CFNetwork 0x00007fff80760600 _ZN17MultiplexerSource7performEv + 160
23 CoreFoundation 0x00007fff876f4401 __CFRunLoopDoSources0 + 1361
24 CoreFoundation 0x00007fff876f25f9 __CFRunLoopRun + 873
25 CoreFoundation 0x00007fff876f1dbf CFRunLoopRunSpecific + 575
26 HIToolbox 0x00007fff802ee7ee RunCurrentEventLoopInMode + 333
27 HIToolbox 0x00007fff802ee5f3 ReceiveNextEventCommon + 310
28 HIToolbox 0x00007fff802ee4ac BlockUntilNextEventMatchingListInMode + 59
29 AppKit 0x00007fff881dbe64 _DPSNextEvent + 718
30 AppKit 0x00007fff881db7a9 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
31 AppKit 0x00007fff881a148b -[NSApplication run] + 395
32 AppKit 0x00007fff8819a1a8 NSApplicationMain + 364
33 Mail 0x00000001000025a4 0x0 + 4294976932
34 ??? 0x0000000000000002 0x0 + 2
06/04/2011 14:23:18 Mail[802] An exception was thrown 'Cannot lock focus on image <NSImage 0x1015ef800 Size={0, 0} Reps=(
)>, because it is size zero.'. Stack trace:
0 CoreFoundation 0x00007fff877577b4 __exceptionPreprocess + 180
1 libobjc.A.dylib 0x00007fff839a90f3 objcexceptionthrow + 45
2 CoreFoundation 0x00007fff877575d7 +[NSException raise:format:arguments:] + 103
3 CoreFoundation 0x00007fff87757564 +[NSException raise:format:] + 148
4 AppKit 0x00007fff88317990 -[NSImage _lockFocusOnRepresentation:rect:context:hints:flipped:] + 319
5 AppKit 0x00007fff88317847 __-[NSImage lockFocusWithRect:context:hints:flipped:]block_invoke1 + 100
6 AppKit 0x00007fff882abba1 -[NSImage _usingBestRepresentationForRect:context:hints:body:] + 178
7 AppKit 0x00007fff883177cd -[NSImage lockFocusWithRect:context:hints:flipped:] + 289
8 AppKit 0x00007fff88317697 -[NSImage lockFocusFlipped:] + 142
9 Mail 0x000000010009474d 0x0 + 4295575373
10 Mail 0x0000000100094512 0x0 + 4295574802
11 Mail 0x0000000100094237 0x0 + 4295574071
12 Mail 0x0000000100093e16 0x0 + 4295573014
13 CoreFoundation 0x00007fff8772c96c _invoking__ + 140
14 CoreFoundation 0x00007fff8772c83d -[NSInvocation invoke] + 141
15 Mail 0x000000010006665a 0x0 + 4295386714
16 Foundation 0x00007fff86f198ea nsnotecallback + 167
17 CoreFoundation 0x00007fff876ff000 __CFXNotificationPost + 1008
18 CoreFoundation 0x00007fff876eb578 _CFXNotificationPostNotification + 200
19 Foundation 0x00007fff86f1084e -[NSNotificationCenter postNotificationName:object:userInfo:] + 101
20 Mail 0x0000000100002a65 0x0 + 4294978149
21 WebCore 0x00007fff8610c843 _ZN7WebCore15ProgressTracker21finalProgressCompleteEv + 83
22 WebCore 0x00007fff8610c7d8 ZN7WebCore15ProgressTracker17progressCompletedEPNS5FrameE + 104
23 WebCore 0x00007fff86093e3a _ZN7WebCore11FrameLoader26recursiveCheckLoadCompleteEv + 298
24 WebCore 0x00007fff861b4567 ZN7WebCore14DocumentLoader23removeSubresourceLoaderEPNS14ResourceLoaderE + 135
25 WebCore 0x00007fff861b3a3c _ZN7WebCore17SubresourceLoader16didFinishLoadingEv + 124
26 Foundation 0x00007fff86f9a608 _NSURLConnectionDidFinishLoading + 113
27 CFNetwork 0x00007fff807741a0 ZN19URLConnectionClient23_clientDidFinishLoadingEPNS26ClientConnectionEventQueueE + 174
28 CFNetwork 0x00007fff807d99ae _ZN19URLConnectionClient26ClientConnectionEventQueue33processAllEventsAndConsum ePayloadEP20XConnectionEventInfoI12XClientEvent18XClientEventParamsEl + 254
29 CFNetwork 0x00007fff807d9c1a _ZN19URLConnectionClient26ClientConnectionEventQueue33processAllEventsAndConsum ePayloadEP20XConnectionEventInfoI12XClientEvent18XClientEventParamsEl + 874
30 CFNetwork 0x00007fff80760825 _ZN19URLConnectionClient13processEventsEv + 121
31 CFNetwork 0x00007fff80760600 _ZN17MultiplexerSource7performEv + 160
32 CoreFoundation 0x00007fff876f4401 __CFRunLoopDoSources0 + 1361
33 CoreFoundation 0x00007fff876f25f9 __CFRunLoopRun + 873
34 CoreFoundation 0x00007fff876f1dbf CFRunLoopRunSpecific + 575
35 HIToolbox 0x00007fff802ee7ee RunCurrentEventLoopInMode + 333
36 HIToolbox 0x00007fff802ee5f3 ReceiveNextEventCommon + 310
37 HIToolbox 0x00007fff802ee4ac BlockUntilNextEventMatchingListInMode + 59
38 AppKit 0x00007fff881dbe64 _DPSNextEvent + 718
39 AppKit 0x00007fff881db7a9 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 155
40 AppKit 0x00007fff881a148b -[NSApplication run] + 395
41 AppKit 0x00007fff8819a1a8 NSApplicationMain + 364
42 Mail 0x00000001000025a4 0x0 + 4294976932
43 ??? 0x0000000000000002 0x0 + 2
)

A final weird follow-up: the “Note font" part of the Fonts & Colours preference panel wasn't visible before. In other words, if the wrong font is selected, you don't have the option to change it or even to know which fund could be corrupted.

Communication Failure exception on adapter in Data Services

Hi,
I have been trying to get rid of this error but no matter what i do, i cannot resolve this.
I am using Edge 3.1 Data services on a 2008 Windows server. And i'm trying to login to salesforce ans retrieve data. This has been working for well for the past year. No change whatsoever to either salesforce or on the server. All of a sudden i'm unable to connect according to the error. But when i check in salesforce, it shows a successful connection from the server. That just blew my mind.
These are the parameters which might help understand my issue.
service endpoint: https://www.salesforce.com/services/Soap/u/16.0
- I changed the sercurity token from salesforce.
- I changed the retry count to 200000 in the DBconfig file
- Restarted the OS
- Restarted the adapters.
My Additional Java Launcher is -Xms64m -Xmx256m
I dont have a proxy
I'm at my wits end. And have no more solutions in my bag. I tried everything i could find in this forum. Any help would be greatly helpful.
Also, the weirdest part is, When i right click on Datastore and "edit", i can enter the password and it saves the data with no error. I get the above error only when i "open"the Datastore.
Hence, I am unable to execute any batch job. All jobs hang in place for 3 hrs or so and then finally fail. It doesnt even pass the first Dataflow.

i am able to connect to salesforce from a browser. Even more surprising, when i right click on adapter and click edit , I can save it, meaning it does connect to salesforce and on Salesforce, i see a successsful login history from the server. But, it does not let me browse the metadata and also, when any job starts, it just gets stuck and teha adapter throws the java socket timeout exception.

Provider failure Exception

Similar Messages

Maybe you are looking for