Providers other than AT&T

Dears, my mobile service provider is Vodafone-Egypt, did the IPhone needs special crack to work with this network or what?

Yes.
The iPhone is sold by Apple in the U.S. as carrier locked with AT&T only, in the UK as carrier locked with O2 only, in Germany as carrier locked with T-Mobile only and in France as carrier locked with Orange and an unlocked version is also sold in France which is mandated by French law and sold at a significantly higher price than the carrier locked iPhone.
These are the only countries where Apple sells the iPhone at the present time and even the unlocked version sold in France may not work with Vodafone in Egypt. The unlocked version may work with other French carriers in France only.

Similar Messages

Experiences on JPA persistence providers other than standard SAP's

Hi developers,
in this thread I would like to gather experiences from all those who have tried using JPA persistence providers other than SAP standard implementation in productive environments
It would be very interesting if you could share you experiences, for instance with regards to:
- advantages of a specific implementation
- disadvantages (if any)
- new features available (e.g. Lazy support for Lob and single-value relationships)
- ease of transport (did you manage to somehow use the java dictionary DCs or what?)
- ease of build (e.g. EclipseLink requires additional build plugins to be developed)
- ease of overall setup: how long did it take to set the DI stuff up (SLD SC creation/track creation/check-in/check-out/activate/transport/...)?
thank you so much for sharing your experiences.
Regards
Vincenzo

Hi Vincenco,
yes, semantic IDs do not have a place in JPA. Semantic keys are needed, but not as IDs.
Both SAP JPA and EclipseLink use @GenerationType.TABLE generation if you define @GenerationType.AUTO. ("AUTO" just means that the persistence provider "should pick an appropriate strategy for the particular database" (javadoc)
Both TABLE and SEQUENCE are somewhat automatic.
I guess the fact of lost-values is because the fetching of IDs is done in another transaction (probably for performance reasons, not to have the sequence table as a bottle neck).
On Oracle, the combination of allocationSize on JPA side and INCREMENT BY / CACHE on Database side is as follows: allocationSize must be equal to INCREMENT BY, but JPA uses the intermediate numbers (which is not the case in normal (PL)SQL programming. There is no annotation-JPA-pendant to CACHE. But that JPA uses the intermediate numbers from memory may be considered as a JPA way of sequence caching (that may be further improved by Sequence CACHE for really big mass insers in one transaction).
CACHE>1 will give you lost values even with allocationSize = Increment BY = 1.
On the other hand, allocationSize=1 may give bad performance on mass inserts because the JPA provider must ask the database for every instance. allocationSize>1 (e.g. 20) is better but will again yield lost values. (But who cares with "long"?)
There is one important issue with both automated value creation strategies - GeneratorType.TABLE and GeneratorType.SEQUENCE: The ID cannot be set by yourself on instantiation of an Entity object. JPA spec defines that the ID is set at the latest on EntityManager.flush or EntityManager.commit, which is sometimes too late if you have container managed transaction boundaries.
But both SAP JPA and EclipseLink assure that the ID with Table and Sequence is set already after call EntityManager.persist(newObject). This improves a lot, but may be not enough.
Example:
@Entity(name="T_ORDER")
public class Order {
     @OneToMany(targetEntity=OrderItem.class, mappedBy="order", cascade=CascadeType.ALL)
     private List<OrderItem> items = new ArrayList<OrderItem>();
     public void addItem (OrderItem item) {
          this.items.add(item);
          item.setOrder(this);
@Entity(name="T_ORDERITEM")
public class OrderItem {
     @ManyToOne(targetEntity = Order.class)
     private Order order;
EntityManager em = emf.createEntityManager();
em.getTransaction().begin();
Order o = new Order();
OrderItem i1 = new OrderItem();
o.addItem(i1);
em.persist(o);
OrderItem i2 = new OrderItem();
o.addItem(i2);
At the end of this snippet, o and i1 have ID != null but i2 has ID==null. there is no way to "auto-persist" an object which gets into a relation to an already persisted object. i2 gets an ID!= null after flush or commit.
This may be tricky if your business logic that adds items is "pojo" without acces to EntityManager or if you do not want to mess up your business logic with flushes.
How to "broadcast" the unique IDs of just inserted order items to the User Interface if they are not yet set in the last line of your SLSB?
We switched to simple UUIDs that are generated on instanciation. long VARCHAR2s, but it works fine and is very common.
Regards
-Rolf

Email providers other than gmail and yahoo?

We are moving and will be loosing our Comcast.net account. Are there any other internet providers other than gmail and yahoo that are nation wide that I can use firefox and thunderbird with?
Thanks in advance for your help!

Microsoft operates Outlook.com, formerly Hotmail. It offers IMAP connectivity so you can mirror your mail into any number of mail programs: http://blogs.office.com/2013/09/12/outlook-com-now-has-imap/
There are, of course, dozens of companies around the globe that you could use as your free email service, but Google, Microsoft, and Yahoo probably are the "big 3" in this field.

When will iPhone be availble for customers of providers other than AT&T

Just curious to know if anyone has a clue, or guess, as to when Apple will release an iPhone that can legally be used with a service provider other than AT&T. That is if Apple ever will.

AT&T has 5 year contract. Only have 1 year off so far, so four more years. As far as US goes, only TMoble has the type of network needed to be used on anyhow.

Can I use Apple store from a country other than the country I live in. Example: I live in USA and want to use Apple store in Thailand to buy and download thai content.

Can I use Apple store from a country other than the country I live in. Example: I live in USA and want to use Apple store in Thailand to buy and download thai content.

No, you can only buy content from your own country's store - to be able to buy form another store you need a valid billing address in that country and be in that country when buying from it. You can try requesting that the content that you want be added to the US store, but ultimately it's the content providers (record companies, film studios etc) that will have to grant Apple a license to sell it there : http://www.apple.com/feedback/itunes.html

How can I install to a drive other than C?

I installed the CS6 Master Collection trial version. During the installation, I specified a destination folder on my D: drive (C: is a small SSD drive meant to hold only Windows).
For the 32-bit versions of the programs, the shortcuts created in the Start Menu point to the D: location I specified during installation, but clicking on them gets me a "file not found" error, because the actual programs were placed on the C: drive. They work if I copy the installed Adobe folder and its full contents over to the appropriate D: location.
The 64-bit versions are a different mess: Unlike with the 32-bit versions, the installer placed the 64-bit versions of the programs in the specified D: drive folder, but when I attempt to start the programs, I get the "Configuration Error: Please uninstall and reinstall the program; Error: 1" message. Presumably this is because some of the configuration files or settings the programs are looking for are actually pointing to locations on the C: drive, where the installer put them despite my directions. But I have no idea which files or settings they are, or how to find them.
How can I fix these configuration errors and get the 64-bit versions working?
If anyone from Adobe sees this, can you please fix the installer so that it installs the ENTIRE package where I specified, and that all the various pieces installed know where the rest of the pieces are in a non-C drive installation?
My system:
Windows 7 SP1
Intel Core i7, 8GB RAM
C drive: 60GB SSD (Windows system files)
D drive: 1TB HDD (All other programs and files, including my Windows User folders)

Yes, I have redirected my User folder to the D: drive.
I know that some shared components must reside on the C: drive; that's fine. I just don't have room for the entire installation on there.
The real issue here is that, when a drive other than C: is selected as the destination, the CS6 package installs into a broken state every time, out of the gate, on my system. Some components get installed to D: and some to C:, but the various components of the programs seem confused about what exists where, as shown below:
I select a folder on D: as the destination folder for the install, and here is what I get:
64-bit versions of the package -- Program files are installed to the D: drive as specified, but attempting to start them results in a configuration error message stating that the program must be uninstalled and reinstalled, and lists "Error code: 1".
32-bit versions of the package -- Program files are installed to the C: drive against what I specified. The shortcuts installed in the Start menu for the 32-bit versions point to the locations where these program files SHOULD be, on the D: drive. If the Adobe folder containing the program files is copied over to the correct location on D:, these programs function normally with no errors.
I have the 32-bit versions working by copying the program files from C: to D:. I just want to get the 64-bit versions working as well.
Any help you could give would be greatly appreciated; I'm really looking forward to testing the CS6 suite on my system!

I've just found that three movies I've bought from iTunes on on my iPad are not showing up on Apple TV or anywhere other than that iPad. What's up with that and will I lose these films if I reset this iPad?

I've just found that three movies I've bought from iTunes on on my iPad are not showing up on Apple TV or anywhere other than that iPad. What's up with that and will I lose these films if I reset this iPad?

Thanks. The reason this has become an issue is that I recently bought a new Macbook Air that the iPad is not synced to. The one is was synced to was stolen. If I want to sync this iPad to the new Air, won't it be wiped before I'm able to copy these films or am I wrong about that?

I need to add a mileage calculation box to an existing form created by someone other than me. Please help, I am new to javascripting.

I have the book 'Creating Dynamic Forms with Adobe LiveCycle Designer, but none of the javascript or formcalc script is working. Can someone tell me step-by-step how to go about adding this to the existing dynamic form?
I added a small table on the existing subform, with the other 2 tables already in the form. This looked like a straight forward project. But, I have not any experience in java script other than googling for script and adding it to Adobe Acrobat fillable forms. So, I am sure I am going at this wrong.
Respectfully

Hi,
can you provide the script you have tried and what exactly you want to do. What is the calculation you are trying to do?

How to insert a table or object image other than at bottom or report

Please excuse my HTML ignorance. Is there a way to use a previously added tag to go back and insert a FP object at the tag location in an HTML report. The only way I can figure out how to do it would be to append the object using the report generation vis, then search the HTML document for the originally added tag, and replace this tag with the appended code.
I append teat results as they are generated but once all tests are complete, I want to put the summary table at the top (after the header though).
Thanks, Rick

Hi Rick,
There is no built-in way with the Report Generation VIs to append something to your report anywhere other than the very bottom. I have attached a VI that shows the best way I can think of to accomplish this...it involves using an internal Report Generation VI called "Generate Report Get Data.vi" that gets the actual string that contains all your HTML from the internal data structure of the Report Generation VIs...once you have this string, you can manipulate it with the normal String functions in LabVIEW...then once you've got it manipulated the way you want, you can stick it back into your report.
I hope this gets you started in the right direction...I saved the VI in LabVIEW 8.0 format. Let me know if you have any other questions.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman
Attachments:
Custom_HTML_Report_Append.vi ‏31 KB

Running a java program in a directory other than the current directory

How do I run a java program that's located in a directory other than the current directory?
There is a file Test.java in /dir1/subdir1. If my current directory is anywhere other than that directory, say /dir2/subdir2, I can compile Test.java by using:
javac -classpath /dir1/subdir1 /dir1/subdir1/Test.java
But when I try to run it with:
java -classpath /dir1/subdir1 /dir1/subdir1/Test
I get a java.lang.NoClassDefFoundError: \dir1\subdir1\Test
Any thoughts?

You need to specify just the name of the class you want to run. So java -classpath /dir1/subdir1 Test

How do I install CC Desktop and Apps to a drive other than "C"?

After several problems, help from the forum, and finally an Adobe tech from India, the tech was able to install CC Desktop. The tech had to make hidden files visible, and change an existing file OO?? (I can't remember the last two letters") to OO??_old. Maybe this will help someone else.
Perhaps I'm wrong, but as the tech was downloading and installing CC Desktop, I didn't see any option for which drive to install it on. I am now installing CC apps. I see no option as to which drive to install the app.
I have my computer setup as C: operating system; D: sctratch; E: programs; F: files, G: cd/dvd.
How can I install CC Desktop to "E"? If done, will CC apps automatically install on "E"? Will CC Desktop work properly on other than "C" drive? Will CC apps work properly on other than "C" drive? If CC Desktop should always be on "C", can I stll install CC apps on "E"? I get no dialog box or window providing an option of where to install any of the CC programs.

While CCApp Prefs does give you this option, it doesn't respect the settings and still installs to C: Drive. This is a big problem for those using an SSD drive to boot. Why would something as simple as choosing your install folder, like every other application in the world be an issue that has taken over a year to fix?

Can i use imac's internal CD/DVD drive to install windows 8.1 pro on macbook via ethernet or firewire or other than purchasing an external drive??

can i use imac's internal CD/DVD drive to install windows 8.1 pro on macbook via ethernet or firewire or any method other than purchasing an external drive??

Note: These types of discs or activities are not supported by DVD or CD sharing:
DVD movies.
Audio CDs.
Copy protected discs such as game discs.
Install discs for an operating system such as Microsoft Windows (for use with Boot Camp), or Mac OS X.
Burn a CD or DVD

How can I buy films in languages other than German in Germany? Quite disappointed, i would line to watch films in Original language and not dubbed in strange ways...

How can I buy films in languages other than German in Germany? Quite disappointed, i would like
to watch films in Original language and not dubbed in strange ways...

You are at the mercy of the content owners/copyright holders. They decide what the Apple can sell in each iTS.
MJ

How can Reader v 9 be installed to a volume other than c:?

How can Reader v >9 be installed to a volume other than c:? such as g:?
and is there a distrubution executable available so Reader can be installed on a machine that is not connected to the Internet?

download the .exe from the ftp service and use it to target the install directory:
ergo
ftp://ftp.adobe.com/pub/adobe/reader/
and pick OS and version and language thus:
ftp://ftp.adobe.com/pub/adobe/reader/win/9.x/9.5.0/en_US/AdbeRdr950_en_US.exe

How do I assign a file to a drive other than the drive that contains my program software?

I've just installed a video editing program on my new Mac Pro Xeon 64 bit workstation. I want to ensure that all my media files reside on a drive other than the drive that contains programs. I had no problem doing this on my old Dell. How do I do this on my Mac Pro? -- Gary

Application Preferences.
Next time, 'what' program would also help.
Most people do setup with a dedicated boot drive with OS and apps, .then use other drives or array(s) for media, scratch as needed, including external hardware RAID.

Providers other than AT&T

Similar Messages

Maybe you are looking for