Providers problem or mine?

I just recently upgraded to 10.3.9 and had problems immediately afterwards with Mail. Suddenly, certain clients tell me they're now getting errors sending to me, something like "smpt recipient communication error." Another told me that my mail coming to them is now marked "junk". Some people continue to send/receive as before. Also, all my preferences were changed after the upgrade. I can't get my service provider to respond and my clients are getting frustrated, as am I. Is this something I can fix or is it my provider? I did repair permissions, preferences, etc... Any help greatly appreciated.
Sue

I can't think any way in which Adobe Reader is involved in downloading pics from your camera. If you think Adobe is involved, check the name of the Adobe software you are using, they make lots of stuff.

Similar Messages

Lightroom doesn't recognize mine camera Nikon D800 E to shoot tethering. There is no problem with mine laptop. Can you help me?

Lightroom doesn't recognize mine camera, the Nikon D800 E to shoot tethering. There is no problem with mine laptop. Can you help me with this issue?
Ronald ( the Netherlands)

Sure the laptop know's that the Nikon D800E is connected, but lightroom doesn't recognise this camera. Two weeks a go it wasn't a problem at all.

I have similar problem, but mine doesn't sound like a loose screw, more like the battery or vibration component is loose. When I shake the phone left to right abit I can feel that it's around the top area. Very annoying, besides that it works fine. Gonna

I have similar problem, but mine doesn't sound like a loose screw, more like the battery or vibration component is loose. When I shake the phone left to right abit I can feel that it's around the top area. Very annoying, besides that it works fine. Gonna go to apple tomorrow maybe to ask.

jsavage9621,
It pains me to hear about your experience with the Home Phone Connect. This device usually works seamlessly and is a great alternative to a landline phone. It sounds like we've done our fair share of work on your account here. I'm going to go ahead and send you a Private Message so that we can access your account and review any open tickets for you. I look forward to speaking with you.
TrevorC_VZW
Follow us on Twitter @VZWSupport

I already downloaded bbm, but the problem some of my friends i can see their profile pictures and there is a problem to invite a contact either barcode and through pin. Did you experience the same problem with mine???

I already downloaded bbm, but the problem some of my friends i can see their profile pictures and there is a problem to invite a contact either barcode and through pin. Did you experience the same problem with mine???

I am sorry but your question is not completely clear. What Apple product are you having problems with?
If English is not your primary language, try posting in your native language.
Best of luck.

Efter det att jag uppgraderade till Firefox 5.0, har jag problem med min webmail. Jag kan logga in men ser inte katalogerna med mina kontakter, mottagna, skickade mail osv.

Efter att ha uppgraderat till Firefox 5.0, har jag problem med min webbaserade mail vid Telia. Jag kan logga in men ser inte katalogerna med mottagna, skickade mail osv, eller mina kontakter och kan inte skicka några mail. Om jag däremot använder Internet Explorer, så fungerar det perfekt.

Mini Dvi to hdmi problem, the mini dvi doesn't even plug in all the way?

hi,
i have a mid 2007 macbook, i just bought a mini dvi to hdmi cable, i tried to plug it in and it doesn't even plug on all the way, 1/3 of the conector is still hanging out, and it doesnt display anything anyways, nothing is detected on the macbook or the TV.
somone seem to have the same exact problem as me with the laptop, but his query wasn't answered it was the last post on this thread.
https://discussions.apple.com/thread/3660057?start=0&tstart=0

Thanks for that. I have a Y adapter (3.5mm stereo headphone jack to RCA sound just like you said). Under input options on my TV, I can select either HDMI1 input (which gives me video only) or AV1/S input (which gives me audio only) - not both at once...Could you explain how I can get stereo audio on my TV?

Problem w/mini-display to DV I adapter, a Macbook Pro 13" & 30" Cinema Disp

I recently switched out my old 15" MacBook Pro for a new 13" version. My old MBPro had a DVI input and the connection between that machine and my 30" Studio Display was not a problem.
However, as I now have the 13" and need to use the mini-display adapter I am getting occasional screen flicker and worse, total static on the screen. It's like I'm in the 1950 watching a B&W TV with rabbit ears.
I have checked and rechecked all of the connectors, but this has become a daily battle to get a clear picture.
I know the display has some years on it, but it's been good till now and I'd like to hold on to it.

Make sure you have the latest version of the Mini DisplayPort to Dual-Link DVI adapter. Check via System Profiler (Utilities folder). It should be at least 1.0.2
<http://mjtsai.com/blog/2009/10/03/mini-displayport-to-dual-link-dvi-adapter-imp roved/>
It could also be a problem with USB power for the adapter. If you have a charger for iPhones or iPods that use USB, try using it to power the adapter (plug the display's USB cable into the computer).

Video brightness problems with mini hooked up to TV

I have a Late 2012 Mac mini that I use as a media hub in my living room. It's hooked up via HDMI to a Pioneer amp and then the display is piped to a Samsung TV. When watching content purchased through the iTMS in full-screen mode, the brightness changes every few seconds from what looks to be "normal" to fairly dark and muddy. The content is watchable, but the constant change in brightness does get annoying. If I watch the content inside the iTunes window, I don't get the strobing; it's only when watching the video Full Screen. I've looked through the settings on the amp and the TV but haven't found one that affects the problem I'm seeing. Has anyone else seen something like this? Any thoughts on how to troubleshoot it?

Hi.
It seems that I finally have found a solution to this problem. It is not perfect, but at least it stops the screen from changing the brightness randomly when watching movies from my mac mini.
The solution is to go into settings, accessability and turn on switch control. I hide the switch control as much as possible in one of the corners down to the left or right corner and makes it as small as possible. It seems it must be active on order to stop the screen from flickering, so I can live with that.
As I said, it is not perfect because a small corner of the switch control will be visible while watching movies, but it is better than the flickering.
If anyone has another or better solution to this problem I´m all ears:)
Have a flicker free afternoon all who have had this problem on mac´s or other iOS devices.
Screenshot of the solution in Norwegian setup
Best regards. Per Saglien

Problem with mini displayport and mini DVI

Hi,
My mac mini is connected with the mini-Dvi to my monitor.It works great.
I would like to connect my mac mini to my TV too.
I bought 2 adpaters : mini displayport to dvi and mini-Dvi to Video. It does not work. The two screens are black ...
First i would like to switch the connection : instead of connected my monitor with the mini-DVI port, i would like to connect my monitor with the mini Displayport. I changed the connection but it did not work : the screen is black so i can't do anything ...
After that i will connect the mini-DVI to my tv ...
Help me please

At least two possibilities come to mind. One would be that the adapter you have is bad. Another is that the mini is starting into a resolution not compatible with the monitor. If the problem is the second one, then you can try starting the mini in Safe mode to see if that results in a useable screen. If it does, then set the resolution to the desired resolution and restart normally. The last selection made should persist through normal restart.
http://support.apple.com/kb/HT1455?viewlocale=fr_FR

Resolution problem with Mini DisplayPort to DVI Adapter

Hi,
I have a unibody MBP 15', running on 10.5.8. I use 'Mini DisplayPort to DVI Adapter' (http://store.apple.com/us/product/MB570Z/A?fnode=MTY1NDA5OQ&mco=Nzk2MDk5OQ) to connect to my external HP LP3065 30' monitor. I get max resolution of 1280 x 800 for external monitor which supports resolution of 2560 by 1600.
This monitor used to work fine with old MBPs, but not with my unibody MBP. What could be the problem? Adapter or MBP?
I am missing high resolutions
Thanks in advance!
Rohit

You have the wrong adapter. The one you have is single-link DVI, which does not support 30" displays. You need the Mini DisplayPort to Dual-Link DVI Adapter:
http://store.apple.com/us/product/MB571Z/A

Problem Mac mini G4 with Panasonic 52" Plasma using s-video (composite)

I am upgrading my mac mini but until then I'd like to watch some movies on my new Panasonic 50" Plasma (TH50PZ80U). The first I connected them together using a DVI-to S-Video adapter it worked but with low resolution (can't remember). The resolution was fine for movies but not reading. When I tried to increase the resolution the screen became all grey and black (like when there's no the TV channel in the old days). I tried all of the following but nothing has worked:
1) Played with the mouse for an hour to try to change the resolution but kept starting new programs instead
2) Connected to my apple display cinema, change resolution to the minimum, and then reconnected it and nothing
3) Asked a friend to bring his laptop to do screen sharing but my OS 10.4.11 doesn't support this functionality
4) Tried starting in safe mode and it won't start in safe mode. It gets stock on the gray apple screen at launch
5) Tried getting an HDMI cable but this mac mini is not strong enough for the plasma screen. It kept going black after a few minutes
6) Tried using keyword shortcuts with SwitchResX but I couldn't seem to find the right sequence.
Remember that I tried to the above blind since the screen was all blurry.
Can someone help. Thanks

+I tried with an HDMI cble, through a DVI adapter, but it seems that my 1st generation mac mini is not powerful enough for that. It comes out at first but as soon as I start any application, it looses signal+
I'll ask again; what happens if you try starting in Safe mode connected by HDMI? I understand that with a normal start and running 1080p, the mini is not necessarily stable. But if you start safe, or start normally, and quickly change the resolution to something lower than 1080p, the mini should be "powerful enough" to run the Panasonic at 720p for example. That should not present a problem.
If you really just want to get back to using the S-Video interface at 640 x 480, you should be able to throw out the display preference files to get back to a clean start. That usually works. Try the following; in /Library/Preferences find the file com.apple.windowserver.plist and throw it in the trash or drag it to the desktop. Find also in /Users/yourusername/Library/Preferences/ByHost the file com.apple.windowserver.xxxxxxxx.plist where xxxxxxx is a string of letters and numbers and yourusername is the name on the main user account and throw that in the trash, too (or drag it to the Desktop). Then restart and see if function returns to S-Video when connected to the Panasonic.

Help! Problem using Mini-DVI adapter

I'm a teacher, and I need some help.
I've been using a Mitsubishi XD 250 data projector at school. The setup I have is exactly the same as it was last year, but something strange is happening.
The data projector uses VGA, so I have the VGA-to-Mini-DVI adapter from Apple.
I turned on the projector this morning, as I have a presentation for one of my classes today, but it's not working! The projector comes on, and the iMac shows that it recognizes the external display, but the projector says "No Signal." I have no idea what the problem is, as I've tried restarting both the iMac and the projector as well as connecting and disconnecting the cables.
Any suggestions? I suppose it's possible that something happened to the VGA cable over the summer, but is that likely considering that the iMac recognizes the external display?
I really need to give this presentation today, so any help would be greatly appreciated!

Dett;
It is probably simply the wrong signal source being set on your projector. This is normally a remote control switch or your projector. I don't know this model but they all have multiple input choices. Change the input until you see your Mac.
Hope this helps
Steppenwolf

Brain pick on an old problem of mine (squealing and poping sound when system is under heavy loa

Firstly, my apologies if this post gets double posted as I am on a barely functional dsl connection? It get?s flaky when it rains which is only periodically for about 2 months of the year?
I was wondering if someone in the know might be able to clue me in as to any fixes for this VERY old issue of mine.
I have already searched a bit and all I found was the squeal and crash issue, mine is similar but not identical.
History:
I have been a creative card user since the first SoundBlaster came out (and jammed it into a 286 system). Well I think it was the first since I was new to computers then?
Anyway I have had an SB, SB6, SB6AWE, SB Li've, and now SB li've Audigy 2 ZS. Pretty sure I had an audigy pro card (a family member was upgrading so I grabbed theirs for cheap).
Since around the audigy series of cards I have been working on friends and family member?s (and their friends/family) on the side. Though these days I am not a happy camper.
Problem:
I am having this problem that I have now learned to li've with where when I am playing sounds (game or music) and the system gets under some type of heavy load I get LOUD squealing and popping sounds (mostly the squealing kind). The sound can be in excess of my volume settings and I tend to wear headphones (I can't believe I wasn?t deafened the first few times and occasionally recently when I forget, actually I have been having trouble understanding people lately, need to get my ears checked I guess).
Heavy load defined:-On occasion copying files from one dri've to another (usually large files in this case).
-Always when copying files over a network to or from my system.
-in few cases of a network heavy or hard dri've heavy application (lan games anyone?) ? Mostly when I am hosting.
NOTE: for the most part the card works fine in games as I usually don?t do something else while playing a game, usually.
For how long?:
This is hard for me to place. I remember wanting to upgrade to 2k when it came out but I heard from friends that had tried to upgrade that the drivers for the sb6 awe or any other creative card were garbage so I delayed upgrading to win2k till I got my first + ghz system and didn?t have much choice. I have been dealing with this since (also at the time I had an audigy or perhaps just a li've, hard to place).
Steps to solve this (not resolved yet):
I have tried several different configurations, this problem has been present on both an amd and 2 (or more) different intel chi
ps.
The problem has not been present on non-creative products under 2k (yes I had a card made by the company that creative bought out a while back), driver updates have done nothing or made it worse (though recent drivers seem to be a little better).
A while back (on the amd machine) I tried dealing with creative via e-mail and got canned responses of things I had already tried (and had noted in my request for help that I had already tried them) even as far as completely clean installs and as I mentioned different systems.
I am now using completely different hardware besides the sound card. Swapping out for other soundcards doesn?t help if they are creative cards (I even went as far as trading someone else identical cards to no avail).
I have even tried windows xp to see if that would help, nope.
The only solution to this so far has been not to use the card and for a while now I have been suggesting to friends and family to just use the internal on mobo sound instead of an add on creative card.
I have even had someone else build me a system (as apposed to my building it) just in case I was doing something weird, no help.
That and just not listening to anything when I am about to put my computer under a heavy load (and making sure to disconnect the phones just in case since sometimes it happens without sound playing, RARELY).
Current system specs:intel p4 2.66 ghz
Audigy 2 zs (platinum if memory serves, pretty sure here)
Geforce 6800gt
gig of ram
(I would have to hunt around for other details like mobo)
I have to say all this effort to get one companies hardware to work just sucks and what sucks more is I have no choice on the market, there is only one noteworthy sound card company when it comes to gaming, on the plus side there isn?t much for me to look forward to in gaming these days? I don?t like MMOs (if I can't play in on a lan and just the people on the lan I don?t care for the game much). Halflife (the reason I bought the geforce 6800 gt card) renders the world in such a way as to make me motion sick (just like all the quake games) so that was a waste of money?
The reason that there isn?t much to look forward to in gaming is because I can just disable my creative card and enable my onboard mobo sound and actually hear sound while doing stuff as apposed to garbled deafening screeching sounds that I do now when I forget to stop sound before doing something hard on the system?
Personally this is a last cry for help before I completely give up, I am already a very disenchanted customer hoping there might be some way that I can just listen to music or play games without much worry about sound (the squeals can be heard from across the room from the headsets set at a normal volume so you can imagine what that?s like when they are on my head). I have already, for the last couple of years, been steering people away from creative products in general touting their core product a failure and the people that didn?t believe I just let them sit and listen to some music and then copy a file?
Sound and music are almost more important to me than graphics btw, I have returned games for poor (in my opinion) quality sound tracks (mostly EA products) and have bought games that had good sound/music but poor graphics, heck I still play some old dos games (loom anyone).
Sorry the end there got a little ranty, so anyone have suggestions to the problem section?
One last thing: This took me a while to find and is a bonus to anyone that read all that? For some relati'vely cheap 5. headphones (all I had looked at were over $00) check out the zalman headphones. I have had mine for well over a year now and they still sound just as good as when I got them (even after the ear shattering squeals) and only cost me $50) They are sturdy too (more than I expected), I tend to break headphones within 5 months even some nice $50 stereo ones and these things are still intact. By break I mean break a wire, blow a speaker (squeals) (not literally exploded), snap the headpiece? I can't seem to see a direct link to the speakers so google zalman and headphones?

I don't know if anyone is following this or cares much but I thought I would add some info for those that like me before signing up, simply searched and found some useful tidbits. I also didn't see an option to edit my previous post as most boards I post on have that option to give you an alternati've to double posting...
My system was gigabit however I only had cat5 cable with a megabit switch. Now the switch is gigabit with a cat5e cable and a short distance from me to the hub (same system otherwise). The gigabit is onboard.
I figured I would see a bit speed boost with the new network and indeed in games I did see an improvement on large data transmitting games (American Conquest 4x4 maps in multiplayer LAN) however I expected file transfers between me and other gigabit on mobo cat5e systems would be significantly better. Instead I saw speeds only slightly better than before, around to 2 megabytes per second (using a measurement tool Netstat li've from AnalogueX) and that annoying screeching. At those speeds that might explain why the game was still on the jerky side (a full blown 4x4 map the way we play stresses all computer components but network seemed to be the bottleneck).
My solution to getting fast file transfers? Disabling my sound card by going to device manager right clicking on the Creative SB Audigy 2 ZS item and choosing disable. With an acti've file transfer (large single file rather than small files) I saw about -2 megabytes per second. Within moments of disabling the soundcard I suddenly had about 20 megabytes per second and the estimated time went from 0 minutes to almost finished...
I have to say on an aside that this just adds to my disappointment with this card (and the fact that I have seen similar poor performance in other peoples cards set up by me or not). This continues to cast a light of doubt for me and future creative products. I have to say though that the X-Fi (after fully updating drivers) seems like it *MIGHT* be worth a try? I certainly won?t drop any money into a new creative card (or recommend creative computer equipment) until I see some good proof that problems such as those that plagued this and other creative cards are gone.
Now remembering several posts I read here (and why I am even posting this), I tried disabling some of the features of my nice Creative card (through the various consoles for example the EAX console). Indeed I did see a performance boost (more on that later) as well as death to the squeals (though oddly I did hear that odd electrical interference noise that is supposed to be why onboard audio sucks) and my ears thanked me for that. As for performance my transfer rates went from -2 megabytes per second to a whopping 4-8 megabytes per second (mostly 5). I am definitely leaving those special features disabled for bandwidth intensi've games, after all they are mostly meant for movie and music enhancement (though they make some games sound nice too). I should note that the squeals, though not deafening, are present with other separations in playback, during file transfers. This isn?t much of an issue for me since win2k (and XP) lets me disable and enable my sound card at will without reboots (most of the time) and it has become habit to work around my sound card in this way already.
I know that there is a limited bandwidth on the system bus between all devices however I just have to wonder why my SB Audigy card is using up so much bandwidth when not doing jack... That and I thought that limit was much higher than 20 or so megabytes per second which has me wonder just how much this sound card is wasting (and possibly stressing) in my system when not doing anything. My guess though is the sound card is merely interfering with PCI traffic and not acti'vely using it (though I am not aware of tools to check this). This might explain why I have gotten less than stellar performance out of other hardware though I have yet to try pushing my system with the sound card off yet?
While I still can't recommend creative sound cards to customers at least I can't say that Creative doesn't make anything worth buying anymore (and I used to be a huge creative advocate). The new Zen mini player got pretty good praise (search maximum PC for the review).
Assuming this thread stays open I will add more of my hopefully useful experience with this sound card. If on the other hand it'ss closed up (since there were a few unkind comments) I should have to assume that Creative has completely turned it'ss back on me as well as my current and future customers (unless some other reason for closing is given of course). As it is now I see signs of improvement in the companies? products (which pleases me to no end) though not yet enough to justify my spending or recommendations, besides the portable device, though I have no interest in devices that don?t allow for flash memory expansion I have been asked about them on occasion.

Strange resolution problem mac mini 2010 w lion 10.7.3

Hi!
I use XBMC as a media center client, and did the update to 10.7.3 yesterday. This update gave me a problem with the resolution on a 55 "LED TV.
If xbmc is running and I switch the source on the television to for example, tuner or blueray player, and then switch back to the mac mini running xbmc, the resolution changes, everything is so big on the screen that you cant read it. I need to force down xbmc and turn back to lion, and then start xbmc again.xbmc is running 1080i 50 Hz PAL, the same for lion.
My mini is always on, and if i leave it over night or some hours, the resolution in lion changes to 960x540 60 Hz NTSE by itself. therfore i belive the problem is lion and not the xbmc. it looks like the mini forget the settings. I tried to format the mini and installed a frech copy of lion 10.7.3 Still problems!
Anyone? please help me, I use the Mini very much and this is an annoying problem

I ran a few more tests and this problem has something to do with the Video Card sensing the TV (or at least I think). The resolution drops to 960x540 HiDPI 60 Hz NTSC when I return from TV to HDMI (Mac Mini) after any of the following:
1. Screen saver was activated
2. Screen was switched off by Lion Power management
I don't beleive this to do with any application running like Plex or XMBC. I tested this with no applications running just what ever Lion loads in the begining.
I tried reseting the PMU but that didn't help.
The only workarround I found was not to uese any screen savers and not allow the screen to switch off (Power Saving Options)
I have submitted a bug report to Apple hopefully they will look into it.
Hope this helps.

Importing problem w/ mini DV (missing frames)

Hi all,
I have two different sets of mini DV tapes (shot with 2 different cameras). They are both game footage for football. Each set provides a different angle (wide angle and tight angle views). I imported both onto iMovie however I had problems with the tight tapes.
The wide angle tapes import just fine but when I try the tight tapes they don't register in the "frame boxes" to the right of the monitor. To be clear, the video itself shows up in the monitor just fine but doesn't appear in real time within the frames...and eventually it does but when I play it back the video is missing frames and is very jumpy.
Because the wide tapes work I know I'm not doing some basic thing wrong- I'm curious as to why the tape from the tight DVs doesn't register. I know the two cameras were different so consequently the two mini DVs are different. Does this have anything to do with the settings of each? It's very odd...any thoughts?
-Greg

Welcome to iMovie Discussions.
Were the poor tapes shot at LP or Super-LP speed?
Could the heads in the poor (narrow) camera need cleaning? (Camcorders, especially Sonys, sometimes replace poor frames 'on-the-fly' while you're watching in the viewfinder, or on a monitor, but that doesn't happen when the poor recordings are exported via FireWire.)
What happens when you swap the tapes between the camcorders and then import? ..In other words, is it the tapes or the camcorders?
(NOTE: a Super Long Play tape swapped into another camcorder may not play back properly because of discrepancies in head alignment ..which may be causing the poor importing anyway - tape and heads shrink and expand in temperature extremes, so shooting a Super LP tape outdoors on a cold day and then replaying indoors in the warmth may produce poor tape/head alignment.)
Which cameras were they, and what happens when you swap the tapes between cameras?

Providers problem or mine?

Similar Messages

Maybe you are looking for