Providers that support EIGRP for MPLS
There doesn't seem to be any list of these and BGP and redistribution drive me nuts. I've heard Sprint offers this but there must be others?
Thanks in advance!
Hello Mloraditch,
it is more a question of commercial policies rather then a technical limit
I think some provider may charge more for the use of EIGRP as PE-CE.
This is because the PE node has to perform the redistribution of EIGRP in MP BGP for your benefit.
Hope to help
Giuseppe
Similar Messages
-
C3560 that supports crypto for remote acess
I have a question WS-C3560-8PC-S that supports ssh remotely to do?
supports the WS-C3560-8PC-S crypto functions?
-
Suggestions on host providers that support coldfusion
i just bought coldfusion and have been using icdsoft.com to
host my website. but, they don't offer support for coldfusion, only
php and a few other scripting languages. any suggestions on who i
should go with?
Mac OS 10.4.6 /Coldfusion MX7 /Dreamweaver 8STAY AWAY! STAY AWAY! FROM - HOSTCENTRIC -
Poorly undertrained reps.
Horrible MSSQL support, even though you pay extra for it!
No Enterprise Manager support
No DSN
Horrible CF support
Crappy Customer Service attitude
They take servers offline for 'maintenance' to enhance the
'speed' way too often, somtimes for more than 4 hours at a time! -
Hi guys,
I am using L3 4506 switch with the IOS Version 12.2(18)EW3. I want to upgrade the IOS which supports SSH. Can any one suggest the latest IOS version that supports SSH for 4506 switch.
Thanks
RajeshThanks Prame...
The Supervisor Engine that we have is Supervisor IV.
For your better understanding i have attached the output below.
Switch#sh ver
Cisco Internetwork Operating System Software
IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version 12.2(18)EW3, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Mon 07-Feb-05 19:21 by hqluong
Image text-base: 0x00000000, data-base: 0x010BFA78
ROM: 12.2(20r)EW1
Dagobah Revision 95, Swamp Revision 29
swsyd0501 uptime is 2 hours, 47 minutes
System returned to ROM by reload
System image file is "bootflash:"
cisco WS-C4506 (MPC8245) processor (revision 7) with 524288K bytes of memory.
Processor board ID FOX094203G6
Last reset from Reload
8 Virtual Ethernet/IEEE 802.3 interface(s)
48 FastEthernet/IEEE 802.3 interface(s)
56 Gigabit Ethernet/IEEE 802.3 interface(s)
403K bytes of non-volatile configuration memory.
Configuration register is 0x2101
I think this will help to suggest me for a better IOS version which support SSH.
Thanks
Rajesh -
IOS for 2801 having support for MPLS
Assalam o Alaikum,
Is there any IOS for 2801 router which has the support for MPLS?Alaikum Al Salam,
Please use Cisco Feature Navigator to find information about Cisco IOS software images and the supported features for your platform(s) :
http://tools.cisco.com/ITDIT/CFN/jsp/index.jsp
Search by feature and choose MPLS, and then choose Cisco 2801 as the platform, you'll get a list of the IOSs that support MPLS on your platform, and please always check the required DRAM and Flash.
BR,
Mohammed Mahmoud. -
Hello everybody, and i hope you are fine all time.
I would to buy iPad 4G (with Retina Display) Wi-Fi+Cellular
but i don't know what is the compatible cellular provider (GSM) for countries of
worldwide, so which one of providers (carriers) is supported GSM for worldwide?
AT&T - Sprint - VERSION
and thank you so much for helping me.
My greetings
FahadThanks for your reply, Mr. BobTheFisherman
but one of my friends told me: not all of U.S carriers supported GSM
for all countries, and he recommended AT&A, because it supports same GSM model that
in communication providers in Saudi Arabia.
so, please, are you sure of your information?, in order to not buying iPad 4th not
compatible with our providers, by the way, i don't mean 4G data, i mean GSM, generally.
Thank you again
Fahad -
I am trying to install windows 7 on my macbook pro 13", when i run bootcamp it tells me that there is not a windows support software available for my computer. Where can i get the windows support software for my macbook?
Apple only supports Windows on certain hardware.
http://www.apple.com/support/bootcamp/
Apple provides their framework for Windows to run on a Mac, a piece of software called a Hybrid MBR that bridges the gap between how Windows reads the drive partition table (MBR) and EFI/GUID partition table that Mac's use.
It doesn't mean Windows can't run on your Mac, a third party solution called rEFIt will also bridge the gap and allow booting of more that just Windows, Linux as well for a triple booting computer.
Your hardware has to meet the other requirements the second and third operating system needs as as being able to install drivers that will work for your hardware, especially the fans or they will run loud and fast by default.
http://refit.sourceforge.net/
This above is a advanced procedure which requires knowledge how computers and various operating systems, drive formats and so forth work.
I even admit I don't know everything myself, but I experiment on a separate piece of Mac hardware (out of warranty/AppleCare) designed for this purpose so in case something screws up I'm not taking down my only machine and can use the other to get online and find solutions.
There is a very high potential for losing your data if your using advanced/non-Apple methods to install Windows on your only Mac where Apple doesn't support it. Also one shouldn't be doing this on Mac hardware that is under AppleCare or warranty as it might be voided. Proceed at your own risk and education. -
Just did the iTunes update that iTunes said was available, now iTunes won't open. I just keep getting a Runtime Error message.
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
Is anyone else having this problem?
I tried to re-install and got the following message: iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114)
Does this mean I have now lost everything?I just had the same error:
R6034
An application has made an attempt to load the C runtime library incorrectly. Please contact the apps support team for more info.
I went to http://support.apple.com/kb/ht1925 and did a complete removal and reinstallation of iTunes. You MUST follow the directions here exactly...it's more than just iTunes that must be removed, and it MUST be done in the order in which the support article says. I followed the exact instructions, and iTunes is back on my machine (no more C runtime error) and you do NOT lose your music...it's all in my library, as it was before.
Good luck! -
Looking for a client/server that supports multiple protocol and delivery
Hi all, I don't know if this the right place to ask my question,here it goes.
I am looking to develop a client-server that supports multiple protocols such as HTTP, HTTPS etc. I am looking for a framework( i don't know if that is correct or I need some kind of web-service (soap etc)) that would manage connection, security etc. I would like to like to devote most of my time in developing business objects with multiple delivery mechanism such as sending serilized java objects, xml message or soap message, or in some case JMS message as well. So I need a client server that can come in via TCP/IP or HTTP or anyother industry standard protocol and I should be able to service him with pub/sub model and also request/response model as well.
I don't know if I had explained what I need, I would like to know what technologies I should be evaluating and which direction I should be heading... Also the server I'm developing should be free of Java constraints if needed...
Also this service is not webbased service as now but if need arises I should have a flexibilty to make them web enabled in future. Also I would like to work with open source webservers or appservers if I needInxsible wrote:I installed i3 - along with the i3status - which I still have to figure out. I am liking what I see as of now. It reminds me of wmii -- when I used it way back when. However I do not like the title bar. I would much rather prefer a 1 px border around the focused window.
"i3 was created because wmii, our favorite window manager at the time, didn't provide some features we wanted (multi-monitor done right, for example), had some bugs, didn't progress since quite some time and wasn't easy to hack at all (source code comments/documentation completely lacking). Still, we think the wmii developers and contributors did a great job. Thank you for inspiring us to create i3. "
To change the border of the current client, you can use bn to use the normal border (including window title), bp to use a 1-pixel border (no window title) and bb to make the client borderless. There is also bt which will toggle the different border styles.
Examples:
bindsym Mod1+t bn
bindsym Mod1+y bp
bindsym Mod1+u bb
or put in your config file
new_window bb
from: http://i3.zekjur.net/docs/userguide.html (you probably already found that by now ) -
I am looking for a text to speech app that supports the Books App?
I am looking for a text to speech app that supports the Books App?
If Settings -> General -> Accessibility -> VoiceOver does not work, then it is unlikely iBooks will do text to speach on its own in the current version.
<http://www.apple.com/feedback>
I know that some competing services, Kindle, Nook, etc... are restricted in doing text to speach by the book publishers.
If this is text in a PDF (not an ebook), then maybe there is another app that can to text to speach on PDFs.
If it is published books that are of interest, there is Audible.com <http://www.audible.com/>
In theory it should be possible to use the Mac OS X Text to Speach facilities to convert a document into an audio file, and they sync that to the iPod Touch. I assume there is similar text to speach utilities for Windows systems.
I'm also guessing that there are web sites dedicated to assisting sight impaired individuals that might provide ideas for getting text to speach options for the iPod Touch. -
How can I fix the Runtime Error R6034 so that I can correctly install iTunes on my PC ? I get a notice that states ' An application has made an attempt to load the C runtime library incorrectly - Please contact the application's support team for more info
Hey Debbiered1,
Follow the steps in this link to resolve the issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
When you uninstall, the items you uninstall and the order in which you do so are particularly important:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Take care,
Delgadoh -
I am trying to download a free trial of photoshop for my macbook pro and it says there is an error and that the requirements for the new version is not supported for the mac I have. I have looked at the list of requirements but have no idea how to tell what I do and do not have?
Apple Menu --> About this Mac.
Mylenium -
My Mac is very slow and applications take a long time to load, especially Safari and iTunes. Please help. I have run the Etrecheck report and these are results.
Thanks Pat
EtreCheck version: 2.1.5 (108)
Report generated 4 January 2015 14:29:26 GMT
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (21.5-inch, Mid 2011) (Verified)
iMac - model: iMac12,1
1 2.7 GHz Intel Core i5 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
BANK 0/DIMM1
empty empty empty empty
BANK 1/DIMM1
empty empty empty empty
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6770M - VRAM: 512 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:32:50
Disk Information: ℹ️
ST31000528AS disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (717.51 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5690H
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Seagate Expansion Desk 2 TB
EFI (disk1s1) <not mounted> : 210 MB
Seagate Expansion Drive (disk1s2) /Volumes/Seagate Expansion Drive : 2.00 TB (1.66 TB free)
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. iPhone
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) [Support]
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (2.0 - SDK 10.9) [Support]
Problem System Launch Agents: ℹ️
[failed] com.apple.syncservices.SyncServer.plist
Launch Agents: ℹ️
[loaded] com.avast.userinit.plist [Support]
[running] com.epson.Epson_Low_Ink_Reminder.launcher.plist [Support]
[loaded] com.epson.esua.launcher.plist [Support]
[running] com.epson.eventmanager.agent.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
[running] com.trusteer.rapport.rapportd.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[loaded] com.avast.init.plist [Support]
[loaded] com.avast.uninstall.plist [Support]
[failed] com.avast.update.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[running] com.trusteer.rooks.rooksd.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[invalid?] com.avast.home.userinit.plist [Support]
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist [Support]
User Login Items: ℹ️
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
AdobePDFViewerNPAPI: Version: 11.0.07 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.07 - SDK 10.6 [Support]
DivXBrowserPlugin: Version: 2.2 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
OVSHelper: Version: 1.1 [Support]
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 8 Update 25 Check version
Safari Extensions: ℹ️
wrc [Installed]
3rd Party Preference Panes: ℹ️
DivX [Support]
Flash Player [Support]
Flip4Mac WMV [Support]
GoToMyPC Preferences [Support]
Java [Support]
Trusteer Endpoint Protection [Support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 281.84 GB
Destinations:
Seagate Expansion Drive [Local]
Total size: 2.00 TB
Total number of backups: 78
Oldest backup: 2013-07-28 18:09:06 +0000
Last backup: 2015-01-04 14:29:38 +0000
Size of backup disk: Adequate
Backup size 2.00 TB > (Disk used 281.84 GB X 3)
Top Processes by CPU: ℹ️
2% WindowServer
1% mds
0% fontd
0% mds_stores
0% com.avast.daemon
Top Processes by Memory: ℹ️
120 MB Safari
112 MB com.avast.daemon
94 MB com.apple.WebKit.WebContent
56 MB spindump
52 MB mds_stores
Virtual Memory Information: ℹ️
479 MB Free RAM
1.56 GB Active RAM
1.11 GB Inactive RAM
904 MB Wired RAM
5.37 GB Page-ins
75 MB Page-outs
Diagnostics Information: ℹ️
Jan 4, 2015, 01:57:18 PM Self test - passed
Standard users cannot read /Library/Logs/DiagnosticReports.
Run as an administrator account to see more information.patbythesea wrote:
Can I assume that with my Mac I do not need any additional virus protection software? If I do, what should I use?
See my Mac Malware Guide for help on protecting yourself from malware. You generally don't need anti-virus software.
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
Dialling plan that supports star services for the UK
Wendy has sent me a dialling play that supporrts *21, but I need a UK dialling plan that supports all fo the UK star services as below - Can anyone help please?
SET ANONYMOUS CALL REJECTION *227#
CHECK ACR *#227#
CANCEL ACR #227#
Call Divert on all calls
SET CALL DIVERSION * 21 * [phone number] #
CHECK CALL DIVERSION * # 21 #
CANCEL CALL DIVERSION # 21 #
Call Divert on no reply
SET DIVERSION ON NO REPLY * 61 * [phone number] #
CHECK DIVERSION ON NO REPLY * # 61 #
CANCEL DIVERSION ON NO REPLY # 61 #
Divert on no reply: *61*number*wait# == (Extra System Y facility only - does not work on 410567 as of Dec 2011)
Wait is two digit time in seconds (05 to 60) before redirection takes place.
Call Divert on busy
SET DIVERSION ON BUSY * 67 * [phone number] #
CHECK DIVERSION ON BUSY * # 67 #
CANCEL DIVERSION ON BUSY # 67 #
Call Divert on no reply or busy
SET DIVERSION ON NO REPLY & BUSY * 66 * [phone number] #
CHECK DIVERSION ON NO REPLY & BUSY * # 66 #
CANCEL DIVERSION ON NO REPLY & BUSY # 66 #
Call Minder (Voicemail)
CALL MINDER SERVICE 1571
Call Waiting
SET CALL WAITING * 43 #
CHECK CALL WAITING * # 43 #
CANCEL CALL WAITING # 43 #
Caller Display
SET CALLER DISPLAY DATA ON *234#
CHECK CALLER DISPLAY DATA *#234#
CANCEL CALLER DISPLAY DATA #234#
Caller ID
WITHHOLD CALLER ID 141 [phone number]
RELEASE CALLER ID 1470 [phone number]
CALLER RETURN 1471
ERASES LAST NUMBER GIVEN ON CALLER RETURN 1475
BLOCK LAST CALL ANSWERED WITH CHOOSE TO REFUSE 14258 [PIN] **
ADD TO LIST OF BLOCKED NUMBERS WITH CHOOSE TO REFUSE 14258 [phone number] #
Charge Advice
SET CHARGE ADVICE (BEFORE A CALL) * 40 * [phone number] #
SET CHARGE ADVICE (FOR ALL CALLS) * 411 #
CHECK CHARGE ADVICE *# 411 #
CANCEL CHARGE ADVICE # 411 #
Choose to Refuse
BLOCK LAST CALL ANSWERED WITH CHOOSE TO REFUSE 14258 [PIN] **
ADD TO LIST OF BLOCKED NUMBERS WITH CHOOSE TO REFUSE 14258 [phone number] #
I
ncoming Call Barring
SET INCOMING CALL BARRING * 261 #
CHECK INCOMING CALL BARRING * # 261 #
CANCEL INCOMING CALL BARRING # 261 #
Miscellaneous
CHECK WHICH SERVICES ARE ACTIVE * # 001 #
BT LINE TEST & RINGBACK FACILITY 17070
REDIAL LAST NUMBER DIALLED **0
Outgoing Call Barring
SET OUTGOING CALL BARRING * 34 option #
CHECK OUTGOING CALL BARRING * # 34 #
CANCEL OUTGOING CALL BARRING # 34 option * [PIN] #
Reminder Call Service
SET REMINDER CALL (using 24 hour clock with 4 digits) * 55 * [time] #
CHECK REMINDER CALL * # 55 #
CANCEL REMINDER CALL # 55 #
SET REGULAR REMINDER CALL * 56 * [time] * [day option] #
CHECK ALL REGULAR REMINDER CALL * # 56 #
CANCEL A REGULAR REMINDER CALL # 56 * [time] * [day option] #
CANCEL ALL REGULAR REMINDER CALLS # 56 #
Day options numbers: Monday - 1, Tuesday - 2, Wednesday - 3, Thursday - 4, Friday - 5, Saturday - 6, Sunday - 7, Monday - Friday: 8 Every Day - 9.
Remote (Smart) Call Divert on all calls
SET REMOTE CALL DIVERT ON ALL CALLS * 44 * [PIN] * [your full phone number] * [number to divert to] #
CHECK REMOTE CALL DIVERT ON ALL CALLS # 44 * [PIN] * [your full phone number] #
CANCEL REMOTE CALL DIVERT ON ALL CALLS * # 44 * [PIN] * [your full phone number] #
Remote (Smart) Call Divert on no reply
SET REMOTE CALL DIVERT ON NO REPLY * 64 * [PIN] * [your full phone number] * [phone number to divert to] #
CHECK REMOTE CALL DIVERT ON NO REPLY # 64 * [PIN] * [your full phone number] #
CANCEL REMOTE CALL DIVERT ON NO REPLY * # 64 * [PIN] * [your full phone number] #
Remote (Smart) Call Divert on busy
SET REMOTE CALL DIVERT ON BUSY * 65 * [PIN] * [your full phone number] * [phone number to divert to] #
CHECK REMOTE CALL DIVERT ON BUSY # 65 * [PIN] * [your full phone number] #
CANCEL REMOTE CALL DIVERT ON BUSY * # 65 * [PIN] * [your full phone number] #
Ringback
SET RINGBACK [phone number] 5
CHECK RINGBACK *#37#
CANCEL RINGBACK #37#
SET RING BACK INHIBIT *02*37#
CHECK RING BACK INHIBIT *#02*37#
CANCEL RING BACK INHIBIT #02*37#
CALL ROUTING VIA BT
(when using another provider) 1280Hi Jon,
After thorough discusiion with engineering team and marketing team, we have decided to support most star services you requested except the following items. I have created a PMF for it. Please send me an email at [email protected]. I will reply you with the PMF.
Call Minder (Voicemail)
CALL MINDER SERVICE 1571
Call Waiting
SET CALL WAITING * 43 #
CHECK CALL WAITING * # 43 #
CANCEL CALL WAITING # 43 #
Caller ID
WITHHOLD CALLER ID 141 [phone number]
RELEASE CALLER ID 1470 [phone number]
CALLER RETURN 1471
ERASES LAST NUMBER GIVEN ON CALLER RETURN 1475
BLOCK LAST CALL ANSWERED WITH CHOOSE TO REFUSE 14258 [PIN] **
ADD TO LIST OF BLOCKED NUMBERS WITH CHOOSE TO REFUSE 14258 [phone number] #
Choose to Refuse
BLOCK LAST CALL ANSWERED WITH CHOOSE TO REFUSE 14258 [PIN] **
ADD TO LIST OF BLOCKED NUMBERS WITH CHOOSE TO REFUSE 14258 [phone number] #
Incoming Call Barring
SET INCOMING CALL BARRING * 261 #
CHECK INCOMING CALL BARRING * # 261 #
CANCEL INCOMING CALL BARRING # 261 #
REDIAL LAST NUMBER DIALLED **0
Outgoing Call Barring
SET OUTGOING CALL BARRING * 34 option #
CHECK OUTGOING CALL BARRING * # 34 #
CANCEL OUTGOING CALL BARRING # 34 option * [PIN] #
Reminder Call Service
SET REMINDER CALL (using 24 hour clock with 4 digits) * 55 * [time] #
CHECK REMINDER CALL * # 55 #
CANCEL REMINDER CALL # 55 #
SET REGULAR REMINDER CALL * 56 * [time] * [day option] #
CHECK ALL REGULAR REMINDER CALL * # 56 #
CANCEL A REGULAR REMINDER CALL # 56 * [time] * [day option] #
CANCEL ALL REGULAR REMINDER CALLS # 56 #
Day options numbers: Monday - 1, Tuesday - 2, Wednesday - 3, Thursday - 4, Friday - 5, Saturday - 6, Sunday - 7, Monday - Friday: 8 Every Day - 9.
Ringback
SET RINGBACK [phone number] 5
CHECK RINGBACK *#37#
CANCEL RINGBACK #37#
SET RING BACK INHIBIT *02*37#
CHECK RING BACK INHIBIT *#02*37#
CANCEL RING BACK INHIBIT #02*37#
Best regards,
Wendy -
Has anybody successfully logged an online support request for an itunes card that hasn't been activated properly? I tried the camera to read it but still no good. Get the error about it not being activated properly so i tried to log an online support ticket twice on two seperate days but get another error saying sorry we can't process this request now try later. Very frustrated, my son has a $20 voucher from Christmas he can' t use.
To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Note: iTunes Gift Cards are only Valid in Country of issue
Maybe you are looking for
-
Add field vat registration number in Miro or in me22n
Hi, All. Maybe somebody know, if it's possible to add ( for change ) vat registration number in miro or in me22n? Thanks, Liza
-
Flash CS3 hanging & Not responding
Hi there, I'm having an issue with trying to import an .ai (CS3) file with strokes to Flash CS3. Whenever I try and import a complex (730 shapes) .ai file with strokes, Flash just hangs and becomes unresponsive. I can however import the same complex
-
Average time between diferrent dates in the same table
I am having a big problem trying to get this sentence for my report the thing is that I have a table name ca_parking ca_parking ( id_parking number, date_in date, date_out date, id_truck number, id_user_rec number, date_rec date); where date_in and d
-
Guten Tag Ich habe ein Katalog (29,000 Fotos) von Photoshop Elements 11 in die aktuelle Testversion von Lightroom (englisch) importiert aber sie sind einfach von 1 - 29'000 durchnummeriert. Keine Ordner und keine Metadaten vorhanden. Ich habe mehrere
-
Wda: call method from a component interface definition (cid)
hello, I created the following scenario: - I have a Main-component "m" - "L" is a component interface definition (cid) which force both cid-L-implementating components "L1" and "L2" to extend and fill the method "set_COMP_USAGES()". - I have other c