Providing authorization for parameter transaction

hello all,
          I have created a parameter transaction for a table maintainance generator(table a z-table). the requirement is, we want to provide authorization only for few users so how can we go forward...
with regards,
sandeep akella.

When you are parametrizing any TCoe then there is no changes happen in the Authorization checks from the original. So you need to take care this in the following way:
1. Go to table TDDAT and find out the Authorization Group of that z-table. If nothing found, please create a Custom Auth group and assign the table to that grp in SE54.
2. Now go to the role through which you want to provide access to that table to the users or create a new role and add the Parametrized Tcode in the menu of the Tcode.
3. In authorization data, please assign the Authorization group for that particular table in S_TABU_DIS and provide the activity as per your requirement.
4. Assign the role to the users.
Regards,
Dipanjan

Similar Messages

  • No authorization for this transaction with movement type 601

    Dear All,
    This is chandra i am getting this error in delivery level " No authorization for this transaction with movement type 601. If give the authorization for SAP ALL its working fine. If give the authorization for SAP SD T.Codes i am getting this error. Plz help me.
    Thanks and regards
    Chandra

    Dear Chandra,
    Check with -
    T. Code: OMJJ
    Select Movement Type: 601 and Double-Click: "Allowed Transaction" (From Left-hand side) .
    Check whether the Transaction is allowed for Movement Type 601 or not
    Note: if Transaction is not listed (i.e. not allowed) and you wanna allow this Transaction with Movement type 601, then -
    Up-there, Tab: New Entry. Click on it.
    Maintain entry as:
    MovTy: 601
    TCode: As reqd.
    and Save.
    Best Regards,
    Amit

  • Authorizations for which transactions are required in BW?

    Hi,
    Can any ony please give some information regarding
    Authorizations for which transactions are required in BW Production Support?
    Regards,
    Aryan

    Hi Aryan,
    Authorizations for the following transactions are required in BW
    1. RSA1
    2. SM37
    3. ST22
    4. ST04
    5. SE38
    6. SE37
    7. SM12
    8. RSKC
    9. SM51
    10. RSRV
    11.RSPC
    13.RSMON
    The Process Chain Maintenance (transaction RSPC) is used to define, change and view process chains.
    Upload Monitor (transaction RSMO or RSRQ (if the request is known)
    The Workload Monitor (transaction ST03) shows important overall key performance indicators (KPIs) for the system performance
    The OS Monitor (transaction ST06) gives you an overview on the current CPU, memory, I/O and network load on an application server instance.
    The database monitor (transaction ST04) checks important performance indicators in the database, such as database size, database buffer quality and database indices.
    The SQL trace (transaction ST05) records all activities on the database and enables you to check long runtimes on a DB table or several similar accesses to the same data.
    The ABAP runtime analysis (transaction SE30)
    The Cache Monitor (accessible with transaction RSRCACHE or from RSRT) shows among other things the cache size and the currently cached queries. The Export/Import Shared buffer determines the cache size; it should be at least 40MB.
    ****Assign Points If Helpful****
    Regards,
    Ravikanth

  • You have no authorization for this transaction in plant: M7120

    Hi guys.
    I am getting the error message(M7120) "You have no authorization for this transaction in plant XXXX" when performing 101 movement for production order using MIGO.
    /nsu53 doesn't return any object. Why?

    Hello Arun,
    It is a standard message. SU53 should show the exact authorization object which has been blocked. Or you can also try to check this with T code ST01.
    Refer the below threads & seek help from your basis consultant to get this resolved.
    Authorisation missing
    authorization error in mbbs transaction | SCN
    Regards
    Mangesh S

  • No authorization for this transaction with movement type

    Hi gurus,
      My sd consultant is authorized to execute VLO2N Tcode. But it is giving the error as follows
      "No authorization for this transaction(vlo2n) with movement type 643" ...
    When i try to do the same thing through BASIS ,it gives no error..
    Thanks in Advance,
    Vaibhav Gore.

    Hi Vaibhav,
    T. Code PFCG --> Give particular Role Name then click Change Button -->
    Then Click Autherization Button --> then Click Change Autherisation(pencil)
    Go and Click or Drill down the Material Management : Inventry Management
    1.This is --> Goods Movement  : Storage Location Type :
       Click -->  Movement type (Inventry Management) Press F4 --> u can choose ur valid type
        Like -->  623        GI iss:cust.ret.pack
    Regards
    kesav

  • No authorization for this transaction with mvt type 101

    Has anyone seen this error:
    RFC BAPI Wrapper call:You have no authorization for this transaction inplant 1120      
    RFC BAPI Wrapper call:You have no authorization for this transaction with mvt. type 101
    RFC BAPI Wrapper call:You have no authorization for this transaction inplant 1120      
    The strange thing is that when I assign user with a different Personnel Number and it works just fine.  But when I switched back to his Personnel Number, then I get above error.
    Even though I don't get any order list but I got all notifications and technical objects.
    Also, this user has same roles with everyone else.  While everyone is working fine this user is the only one that getting the error and no order download to PDA.
    Regards,
    Dai Ly

    Hi,
    please run ther getlist and getdetail handler in the backend directly for that user - most likely you will get a better failure message there.
    Nevertheless - what Application  yre you using? Is it MAM? If yes, check the SPRO setup for this particular user,
    Regards,
    Oliver

  • For my user id, I have the authorization for the transaction, but still iam getting the error that, you don't have authorization, plz suggest?

    Hello ,
    For my user id, I have the authorization for the transaction, but still iam getting the error that, you don’t have authorization, plz suggest?????
    Thnks

    Hello Sampath,
    after you have received the error message about the no authorization, run transaction SU53.
    This transaction shows which authorization has failed last time.
    Best regards,
    Laszlo

  • Authorization for a Transaction code

    Hi,
    In ECC 5.0, how can we get an authorization for a transaction code by debugging the code?
    Actually in 4.6C, we used to debug the code & change SY-SUBRC code to '0' & get the authorization for a perticular transaction code.
    Similarly how can we do this in ECC 5.0?
    I tried, but I am not getting where to change the sy-subrc code to '0'.
    Any help or clue is greatly appreciated.
    Thanks,
    Sarika.

    Hi Sarika,
    You can try out this workaround. In function module 'RS_TRANSACTION_TEST' put a breakpoint at statement ' call function 'AUTHORITY_CHECK_TCODE''. Execute the required transaction using tcode SE93.If you don't have the authorization then sy-subrc will be 4 after the above statement. In debugging mode change it to 0. Hope this helps.
    Thanks,
    Roshan Gujaran.

  • Authorization object for parameter transactions

    Hi all,
    I'm trying to restrict transaction VL10h for shipping point,this transaction is a parameter transaction and is not controlled by an authorization object directly.when I run a trace , transaction Vl10x shows up. The authorization object that is being checked is V_LIKP_VST.
    Note : The requirement is when the user executes transaction VL10h he/she should be able to display only those shipping points they are authorized to.
    Please advice.
    Thanks,
    Mohan.

    Hi Mohan,
    For transaction VL10H you can specify values for the following fields in authorization object V_LIKP_VST:
    -Activity:
    01     Create or generate
    02     Change
    03     Display
    04     Print, edit messages
    18     Deliveries from coll. proc.
    24     Archive
    25     Reload
    85     Reverse
    -Shipping point: Here you must set the restriction for each group of users that are allowed for the maintenance of the shipping points that are used for delivery processing.
    You can restrict the access through these fields.
    Regards,
    Leandro

  • Authorization for call transaction in BDC

    Hi,
    How can I avoid authorization during call transaction in BDC. Is possible to fullfill data from transaction if user has no authorization to it?
    regards,
    J.

    Hi, I found solution to my problem here: http://sap.ittoolbox.com/groups/technical-functional/sap-security/transaction-security-2711921
    Thanks everyone for help.
    J.

  • Authorization for customized transaction

    Hi,
         In our system, developers create one transaction ZSIDUPDATE.
    Whenever I (Basis Admin) hit this transaction, error "No Authorization for Transaction" is occurred. I don't understand why the error is for authorization for this customized transaction because I have SAP_ALL & SAP_NEW profile.
       Can anybody give the solution?
    Regards,
    Rajesh

    Hello Rajesh,
    Check the report behind ZSIDUPDATE. I suppose there must be some kind of code which will allow only certain user to execute it based on their user ids. Either the user ids will be hardcoded or else they are being picked up from some table. This is not a classical authorization error. You may set a trace also but debugging is best. it will crack it open in seconds.
    Regards.
    Ruchit.

  • FM for users who have authorization for some transactions.

    Hi there.
    Does anybody know any FM where from a list of transactions the system shows you all the user who have authorization to these transactions?
    I know that there are transactions to obtain this information, but we need a FM.
    Thanks and regards.
    Raúl.

    Hi Mahalakshmi.
    With FM SUSR_USER_DISPLAY_WITH_S_TCODE and GET_AUTH_VALUES you populate users and you get transactions. But we need to populate transactions and to get users.
    Regards.
    Raúl.

  • Authorization for Customization Transactions

    Hi all,
    I am facing a problem in adding an authorization object to the transaction OB08-Exchange Rate Maintenance(Customizing Trans).I can assign this transaction for the concerned user through a role but i need to restrict him with maintenance of 1 currency only ie.he is a malaysian client so i need this user to touch only currency MYR not anyother currency(only From Curr-USD - To Curr-MYR).
    Japanes Client can have the authorization only for maintaining curr JPY.
    Can you help me in this regard.
    Thanks & Regards
    Ajoy

    I think this not possible with OB08 besides a modification.
    create your own view of table tcurr and try to implement a auth.-check
    A.

  • Forcing Authorization for a transaction code without authorization check in

    Transaction code 'PP02' has an authorization object P_TCODE. So when a user who does not have authorization to transaction 'PP02' tries to execute it from command prompt, the SAP system appropriately restricts user saying "You have no authorization".
    However, If Ia program has  "Call transaction" verb calling this transaction and if the restricted user runs this report or module program, it does not restrict the user to access the transaction.
    Is there any way to restrict user to access the transaction from program without explicitly doing authorization check from within the program?
    Jitendra Mehta

    Hi Florin:
    S_TCODE restricts the user only at command prompt level, not if you run the transaction for program using "CALL TRANSACTION" verb.
    If we assign auth.object P_TCODE with some other transaction values (not one for which we want to restrict), then the authority check works for the above.
    But say, if I have no other transaction code values to be assigned to auth. object P_TCODE for the restricted user ( therefore, obviously I don't assign auth. object P_TCODE to any auth. profile for the restricted user) then again, I am out of luck.
    The only way, I have seen this working is to assign value space ( ' '  ) to auth. object P_TCODE and then assign this auth.object to one of the auth. profiles of the restricted user, BINGO!, then it works.
    But our Authorization team has an objection saying "We assign the transactions ( to auth. object ) which the user should have access. It is not  proper to assign a no value to auth. object ( assigning space value ) "
    I do not know how much merit their argument has, however, I was wondering if there is another way I could achieve it without relying on tens of hundred of programs doing auth. checks whenever they call the restricted transaction.
    Please let me know your thoughts.
    Thanks.
    Jitendra Mehta

  • Authorization for MIGO transaction

    Hi everyone
    We need to customize MIGO transaction in a way to restrict user to use it only for certain material types.
    How this can be done?
    Almin

    hi
    we can make purchase order according to document types not migo , if you want to change authorization of migo you can block moments fron OMJJ
    regards
    ronny

Maybe you are looking for