Providing UDID for 3.0 Activation

All,
I just wanted to get some opinions on a matter. I was searching through ebay when I come across developers selling off their activations for iPhone 3.0 beta. I think this is a great idea and opportunity for the developers. It gives them the chance to get willing participants to test their apps, as well as a chance to recover some of their costs for being paid developers (I haven't seen an auction price over 5 dollars so far).
As I came across these auctions, I instantly considered taking part in one of these offers to be able to use the 3.0 firmware. However, in order to take advantage of this situation, you must provide the seller with your device's UDID. Now, all of these developers do have 100 % positive feedback and have sold many of their spots in their development program, but I'm still a little sketchy on providing somebody who I don't know with my device's UDID.
How do you guys feel?

I would not even consider it. They aren't looking for beta testers to test their app, they are people who paid to become developers so they could get the software early and want to recoup their costs by selling the activations.
This has also led to many posts here from people who have messed up their iPhones by installing the Beta, complain that the Beta has bugs (it is a BETA), and then come here to unbrick their iPhone.
Just wait until 3.0 is released.

Similar Messages

Will J2SE 1.4 provide support for authntication with...

Will J2SE 1.4 provide support for authntication with Active Directory ( ouside GSS API Kerberos v5)?

Wana write it?

Instructions for Downloading and Activating the JCOP Tools

In response to my question:
I refer to JCOP Tools available on Eclipse.
If the plug-in free for download?
If it is not, kindly provide a proper hyperlink from which those interested can place their order.Listed below is the reply from IBM. Can anyone who has successfully obtained the activation code this way confirm whether you need to foot the postage?
Cheers!!!!
There is no charge for the JCOP Tools. The tools are provided as-is with no warranty or support. Instructions for downloading and activating the tools follow.
Please note that because our Java Card operating system is now available for more than one silicon vendor, IBM will no longer act as a distributor for sample cards. If you require a sample card, you must now approach the silicon vendors directly . Our current silicon partners are Philips Semiconductor, Samsung and Sharp. In addition you may be able to obtain JCOP sample cards from suppliers on this list http://www.zurich.ibm.com/jcop/order/cards.html
JCOP Tools are subject to US Government Export Controls, and therefore each install has to be activated individually to ensure compliance. Please follow the instructions below for each copy of the tools that need to be activated.
Prerequisites:
   1. If you do not already have a Java Runtime Environment (JRE) installed, download and install a JRE or JDK. You can do so from this website (http://java.sun.com/j2se/1.4.2/download.html). Please note that we recommend the use of JRE version 1.4.2.
   2. If you do not already have the open source software development environment Eclipse installed, download and install Eclipse (http://www.eclipse.org/), You can do so from this website(http://www.eclipse.org/downloads/index.php). JCOP Tools require Eclipse 3.1
To download the tools and start install:
   1. Download the current Update Site image from here (http://www.zurich.ibm.com/jcop/download/eclipse/image/tools.zip)
   2. Unzip the downloaded file to a location of your choice
   3. Start the Eclipse IDE
   4. From the menu bar click on Help > Software Updates > Find and Install
   5. In the Install/Update Dialog select Search for new features to install
   6. Click Next
   7. Click on New Archived Site . . . and browse to the location chosen in step 2
   8. Select the file tools.zip
   9. Click Open then OK then Finish
10. Eclipse Update Manager will start to install the plug-in, continue with the install as needed.
For an activation code please send me ([email protected]) the following information:
   1. Your full postal address - the serial number will be sent via International Courier for US Export control reasons.
   2. Your contact telephone number
   3. The serial number of your JCOP tools install
   4. Your planned usage/reason for needing the JCOP tools
   5. If a student, a copy (fax or digital photo) of your student ID
For the serial number (item 3 above):
   1. Ensure you have downloaded and installed the JCOP Tools
   2. Start the Eclipse IDE
   3. From the menu bar click on File > New > Project
   4. In the New Project Dialog expand the Java Card folder
   5. Select Java Card Project
   6. Click Next
   7. You should now see the JCOP Licensing Wizard
   8. Click Next
   9. Select Verify an Activation Code
10. Click Next
11. The Serial Number should appear on the next page, above the Activation Code entry fields.
12. Once you have that number click on Cancel then Abort (Note: the Java Card project choice will be disabled until the next time you restart Eclipse)

For those who are interested to use the JCOP simulator for a start, I have checked that the plug-in and feature files (in tools.zip) for Eclipse are still available at IBM site, please download and install yourself.
I still keep a copy of user guide for JCOP tools (version 3.1.1a) and the contents are still relevant to Version 3.1.1b simulator in tools.zip.
If you are interested to have a copy of such document, kindly drop me an email to [email protected]

Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator or Internet service provider (ISP) for additional assistance.

Hi All,
This is my first post to ms exchange forum am getting Log onto incoming mail server (POP3): Your server does not support the connection encryption type you have specified. Try changing the encryption method. Contact your mail server administrator
or Internet service provider (ISP) for additional assistance. in my outlook clients, till last Sunday (12.04.15) my exchange was well & good, Monday morning suddenly the problem started like none of our outlook pop3 clients are able to communicate
with exchange (rest IMAP, SMTP & Exchange accounts are working fine). i have tried with all port no but no luck. please help me to get raid of this one.
Exchange 2013 CU6 with server 2012 Std 64Bit
Thanks,
Murali

Dear All,
I have found the solution for above problem, the problem has occur due to PopProxy inactivity
please find relevant exchange management shell commends below.
1. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Inactive
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Active
2. Set-ServerComponentState -Identity <yourmailserver.com> -Component PopProxy -Requester HealthAPI
-State Active
3. Get-ServerComponentstate -Identity <yourmailserver.com>
Server Component State
yourmailserver.com ServerWideOffline Active
yourmailserver.com HubTransport Active
yourmailserver.com FrontendTransport Active
yourmailserver.com Monitoring Active
yourmailserver.com RecoveryActionsEnabled Active
yourmailserver.com AutoDiscoverProxy Active
yourmailserver.com ActiveSyncProxy Active
yourmailserver.com EcpProxy Active
yourmailserver.com EwsProxy Active
yourmailserver.com ImapProxy Active
yourmailserver.com OabProxy Active
yourmailserver.com OwaProxy Active
yourmailserver.com PopProxy Active
yourmailserver.com PushNotificationsProxy Active
yourmailserver.com RpsProxy Active
yourmailserver.com RwsProxy Active
yourmailserver.com RpcProxy Active
yourmailserver.com UMCallRouter Active
yourmailserver.com XropProxy Active
yourmailserver.com HttpProxyAvailabilityGroup Active
yourmailserver.com ForwardSyncDaemon Active
yourmailserver.com ProvisioningRps Active
yourmailserver.com MapiProxy Active
yourmailserver.com EdgeTransport Active
yourmailserver.com HighAvailability Active
yourmailserver.com SharedCache Activ
Replace yourmailserver.com with your server host name.
Thanks

Does my Iphone servce provider account have to be active to wipe my data with Icloud

Does my Iphone servce provider account have to be active to wipe my data with Icloud

The same AppleID, yes. For email specifially, only if you wish to receieve email from the same accounts on both devices.
If you didn't set up the AppleID when you initailly set up the Phone, you will need to go to the following (in the setting app) and set it manually:
iCloud > Account
Mail, Contacts,Calendar > Accounts (for email, Notes, Caledars, etc.)
Messages > Send&Receive
FaceTime
iTunes&App Store
Game Center (if you are using it)

Am i the only one who when trying to enter the code for creative cloud activation ?

I give up,i have been trying to activate a 3 month subscription for CS6 from Staples and every time i try the code it will not work. I have used the chat live and spent about 3 hours already going nowhere. I do not like talking on the phone to some help desk overseas and the only thing i think left to do is to return the junk.

I tried all that and even took a picture of the numbers and blew them up so a blind person could read them and had 3 others read them off. A simple way to fix the problem is get someone on Adobes staff to find a font that most people can read from whatever product the stick it to.
John McDonough
Date: Wed, 1 Aug 2012 18:33:58 -0600
From: [email protected]
To: [email protected]
Subject: Am i the only one who when trying to enter the code for creative cloud activation ?
    Re: Am i the only one who when trying to enter the code for creative cloud activation ?
    created by David__B in Adobe Creative Cloud - View the full discussion
Hey John,
Not sure if it helps or not, but I know sometimes with codes like that its really hard to tell certain characters apart, O - like in Oscar versus 0 - number and number 1 versus lowercase L like in Lima.
Might test entering it both ways if you have any suspect characters?
-Dave
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4592955#4592955
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4592955#4592955. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Creative Cloud by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

My apple id is not working for my iPhone activation. Please help me.

my apple id is not working for my iPhone activation. Please help me.
i'll just restore it.

Not working in what way?
Only the Apple ID that was used to enable "Find My iPhone" on the device can be used to bypass Activation Lock.

How to provide hyperlink for a particular field in ALV

Hi,
How to provide hyperlink for a particular field in alv report.
Regards,
Ramu.

Yes you can do that. using the fieldcatalog there is an option for that. give HOT_SPOT = 'X'. for the column you want.
wa_field-hotspot = 'X'.
REPORT ztest_alv.
TYPE-POOLS:slis.
DATA:it_fieldcat TYPE slis_t_fieldcat_alv,
     wa_field LIKE LINE OF it_fieldcat.
DATA: BEGIN OF it_likp OCCURS 0,
       vbeln TYPE likp-vbeln,
      END OF it_likp.
DATA: layout TYPE slis_layout_alv.
wa_field-fieldname = 'VBELN'.
wa_field-tabname = 'IT_LIKP'.
wa_field-hotspot = 'X'.
wa_field-outputlen = 10.
wa_field-no_zero = 'X'.
wa_field-seltext_l = 'Sales'.
APPEND wa_field TO it_fieldcat.
SELECT vbeln FROM likp
UP TO 10 ROWS
INTO TABLE it_likp.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    i_callback_program      = sy-repid
    is_layout               = layout
    i_callback_user_command = 'USER_COMMAND'
    it_fieldcat             = it_fieldcat
TABLES
    t_outtab                = it_likp
EXCEPTIONS
    program_error           = 1.
*&      Form user_Command
*       text
*      -->UCOMM      text
*      -->SELFIELD   text
FORM user_command USING ucomm TYPE sy-ucomm
                    selfield TYPE slis_selfield.
CASE ucomm.
    WHEN '&IC1'.
      SET PARAMETER ID 'VL' FIELD selfield-value.
      CALL TRANSACTION 'VL02N' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM.                    "user_Command

How do I set up a master slide in Keynote that provides placeholders for multiple images?

I came across an article in Mac|Life (Oct 2012 p90) titled "Create a Stylish Slideshow". The steps include creating a master slide that allows for you to add multiple photos. My master slide list for all themes allows for only one photo per slide. What am I missing and how can I set up a slide to which I can add multiple photos as they do in this article? Yes, I am using Keynote '09 v5.3.

Thanks for the info. Following the instructions which are covered in chap 12 of the User Manual, I found that I cannot use shapes as placeholders. The only success I experienced was if I used an actual photo image. With photos I could select Define as Media Placeholder, with Shapes, the only option was to Define as Text Placeholder. I will address this with a thorough review of chapter 12.
My initial problem was that I assumed that all themes in Keynote possessed the same set of Master slides. When I found this not to be the case I looked at each theme and identified 12 of the 44 provided different master slide options which provided placeholders for more than 1 photo (a few provided up to 6). For helpful information for others, here is a listing of those themes that provide master slides for more than 1 photo: Editorial, Kyoto, Brushed Canvas, Typeset, Craft, Stock Book, Blue Print, Vellum, Modern Portfolio, White Corners, Storyboard, Formal.
Thanks again. Your feedback got me on the right track to resolving my problem.

I recently got my ipod replaced and i have its serial number. now i used to play a game on it which requires me to have its UDID for account transfer so how do i get its UDID when i dont have the ipod now. i have a new one now.

i recently got my ipod replaced and i have its serial number. now i used to play a game on it which requires me to have its UDID for account transfer so how do i get its UDID when i dont have the ipod now. i have a new one now.

I would try contacting Apple.
http://www.apple.com/support/ipodtouch/contact/

Hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad/ TOUCHPAD is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

Did you download and install the Windows Support software? If you did, did you use the Boot Camp Control icon to set up the trackpad how you want it?
http://www.apple.com/support/bootcamp/
https://discussions.apple.com/community/windows_software/boot_camp

RMAN 11gR2 DUPLICATE TARGET FOR STANDBY FROM ACTIVE DATABASE - Issue -HELP

First question.
Can primary and standby database have the same SID name?
As I recall it is yes.
I believe they must have different GLOBAL or DB_UNIQUE_NAME?
Anyway, RMAN I believe is telling me it is having problems copying control file on first and dies.
Permissions Issue on STANDBY machine?
RMAN> connect target backup_admin/backup_admin
connected to target database: LABDG (DBID=1973403623)
RMAN> connect auxiliary sys/oracle@STANDBY;
connected to auxiliary database: LABDG (not mounted)
RMAN> DUPLICATE TARGET DATABASE FOR STANDBY FROM ACTIVE DATABASE;
Starting Duplicate Db at 18-JUL-11
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=10 device type=DISK
contents of Memory Script:
backup as copy reuse
targetfile '/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwLABDG' auxiliar
'/u01/app/oracle/product/11.2.0/dbhome_1/dbs/orapwLABDG' ;
executing Memory Script
Starting backup at 18-JUL-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=151 device type=DISK
Finished backup at 18-JUL-11
contents of Memory Script:
backup as copy current controlfile for standby auxiliary format '/u01/oradat
restore clone controlfile to '/u01/app/oracle/flash_recovery_area/LABDG/cont
'/u01/oradata/LABDG/control01.ctl';
executing Memory Script
Starting backup at 18-JUL-11
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile copy
copying standby control file
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/18/2011 11:20:54
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 07/18/2011 11:20:
ORA-17628: Oracle error 19505 returned by remote Oracle server

Hi,
Permissions Issue on STANDBY machine?First problem I see is the sysdba password must be the same on both sides (target and auxiliary dbs).
From the documentation.
The source database and auxiliary instances must use the same SYSDBA password, which means that both instances must have password files. You can
create the password file with a single password so you can start the auxiliary instance and enable the source database to connect to it.Check all prereqs for the standby db duplicate here.
http://download.oracle.com/docs/cd/E11882_01/backup.112/e10643/rcmsynta020.htm#i81724
Rgds,
Tycho

RMAN duplicate target database for standby from active fails to create newname for system tablespace/datafile

When executing 'duplicate target database for standby from active' the system tablespace/datafile (datafile 1) is not cloned. All other datafiles clone successfully. The RMAN process aborts with the following errors while attempting to clone the system tablespace/datafile.
ORA-19558: error de-allocating device
ORA-19557: device error, device type: DISK, device name:
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-17627: ORA-01041: internal error. hostdef extension doesn't exist
ORA-03135: connection lost contact
Here are the details:
Primary is 11.2.0.2 RAC database on an Exadata platform
Standby is 11.2.0.2 Single Instance database (same patch level as primary) on a Red Hat Linux box
This is an ASM to ASM duplication.
This is not unique to this database. We tried another database and go the same behavior - all datafiles clone successfully with the exception of the system tablespace/datafile.
We have traced the RMAN execution and it seems to fail when it is trying to assign a NEWNAME to the system tablespace/datafile.
We even issued an explicit SET NEWNAME command but RMAN ignored it.
We also shutdown the primary and started is up in mount mode thinking that something had ahold of the System Tablespace/datafile.
We also opened up the network firewall to allow permit any,any traffic.
We increased the max_server_processes
and added TCP.NODELAY=yes to the sqlnet.ora file.
There seems to be some artifact present in our Primary System tablespace/data file that is preventing it form being cloned.
checked all alert files grid, asm, and dbhome - no abnormal messages.
We are in the process of restoring the database from a backup but we would prefer to get this working using the 'Active Database' methodology

I successfully created the standby database using RMAN backup and recovery.
I started the managed recovery. Archive logs are being sent from the primary to the standby ( I can see them in ASM), but the standby is not applying them.
I get the following messages in the standby alert log...
Fetching gap sequence in thread 2, gap sequence 154158-154257
Tue Nov 26 16:19:58 2013
Using STANDBY_ARCHIVE_DEST parameter default value as USE_DB_RECOVERY_FILE_DEST
Using STANDBY_ARCHIVE_DEST parameter default value as USE_DB_RECOVERY_FILE_DEST
Tue Nov 26 16:20:01 2013
Fetching gap sequence in thread 2, gap sequence 154158-154257
Tue Nov 26 16:20:11 2013
Fetching gap sequence in thread 2, gap sequence 154158-154257
Tue Nov 26 16:20:22 2013
Fetching gap sequence in thread 2, gap sequence 154158-154257
Tue Nov 26 16:20:32 2013
Fetching gap sequence in thread 2, gap sequence 154158-154257
I don't see any MRP processes:
select process,
status,
    thread#,
    sequence#,
   block#,
blocks
7     from v$managed_standby;
PROCESS   STATUS          THREAD# SEQUENCE#     BLOCK#     BLOCKS
ARCH      CLOSING               2     154363          1        132
ARCH      CONNECTED             0          0          0          0
ARCH      CONNECTED             0          0          0          0
ARCH      CONNECTED             0          0          0          0
ARCH      CONNECTED             0          0          0          0
ARCH      CONNECTED             0          0          0          0
ARCH      CONNECTED             0          0          0          0
ARCH      CONNECTED             0          0          0          0
RFS       IDLE                  0          0          0          0
RFS       IDLE                  1     145418        121          1
RFS       IDLE                  0          0          0          0
PROCESS   STATUS          THREAD# SEQUENCE#     BLOCK#     BLOCKS
RFS       IDLE                  0          0          0          0
12 rows selected.
SQL> SELECT THREAD#, SEQUENCE#, APPLIED FROM V$ARCHIVED_LOG;
   THREAD# SEQUENCE# APPLIED
         2     154356 NO
         2     154357 NO
         1     145411 NO
         2     154358 NO
         2     154360 NO
         2     154361 NO
         1     145414 NO
         1     145415 NO
         2     154362 NO
         2     154363 NO
         1     145416 NO
11 rows selected.
I do have the archive logs that cover sequences 154158-154257
Crosschecked 38 objects
Crosschecked 62 objects
Finished implicit crosscheck backup at 26-NOV-13
Starting implicit crosscheck copy at 26-NOV-13
using channel ORA_DISK_1
using channel ORA_DISK_2
Crosschecked 2 objects
archived log file name=+RECO_XORA/nmuasb00/archivelog/2013_11_26/thread_2_seq_154377.344.832521989 RECID=29 STAMP=832521990
validation succeeded for archived log
archived log file name=+RECO_XORA/nmuasb00/archivelog/2013_11_26/thread_2_seq_154378.346.832521991 RECID=31 STAMP=832521993
Crosschecked 31 objects

RMAN DUPLICATE FOR STANDBY FROM ACTIVE DATABASE fails

Hello
I'm trying to use RMAN DUPLICATE to create a standby database using Oracle 11.2.0.3 with PSU 6 on HP-UX.
Primary is 2 node RAC. Standby is also 2 node RAC.
Standby database instance is started in nomount mode.
I use:
duplicate target database for standby from active database
spfile
<some spfile parameters>
with PFILE I get:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/01/2013 12:41:13
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of sql command on clone_default channel at 10/01/2013 12:41:13
RMAN-11003: failure during parse/execution of SQL statement: alter system set spfile= '/opt/oracle/db11203/dbs/spfileCU1.ora'
ORA-02097: parameter cannot be modified because specified value is invalid
ORA-01565: error in identifying file '/opt/oracle/db11203/dbs/spfileCU1.ora'
ORA-27037: unable to obtain file status
HPUX-ia64 Error: 2: No such file or directory
With SPFILE I get;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 10/01/2013 13:06:34
RMAN-05501: aborting duplication of target database
RMAN-05537: DUPLICATE without TARGET connection when auxiliary instance is started with spfile cannot use SPFILE clause
But I do have RMAN connexion to target database.
Thanks for your help.

Here is the output beginning of the script which clearly shows that I'm always connected to target database:
Recovery Manager: Release 11.2.0.3.0 - Production on Tue Oct 1 13:05:47 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: CU (DBID=1143962925)
connected to auxiliary database: CU (not mounted)
RMAN> set echo on
2> run
3> {
4> configure device type disk parallelism 10;
5>   allocate channel pr1 type disk;
6>   allocate channel pr2 type disk;
7>   allocate channel pr3 type disk;
8>   allocate channel pr4 type disk;
9>   allocate channel pr5 type disk;
10>   allocate channel pr6 type disk;
11>   allocate channel pr7 type disk;
12>   allocate channel pr8 type disk;
13>   allocate channel pr9 type disk;
14>   allocate channel pr10 type disk;
15>   allocate auxiliary channel st1 type disk;
16>   allocate auxiliary channel st2 type disk;
17>   allocate auxiliary channel st3 type disk;
18>   allocate auxiliary channel st4 type disk;
19>   allocate auxiliary channel st5 type disk;
20>   allocate auxiliary channel st6 type disk;
21>   allocate auxiliary channel st7 type disk;
22>   allocate auxiliary channel st8 type disk;
23>   allocate auxiliary channel st9 type disk;
24>   allocate auxiliary channel st10 type disk;
25>   duplicate target database for standby from active database
26>   spfile

The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.

I am getting the following error when attempting to INSERT the results of an "EXEC(@MDXQuery) at SSAS LinkedServer":
The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.
Here is code that illustrates what I am doing:
DECLARE @MDX varchar(max);
SET @MDX='
SELECT
[Measures].[Extended Service Count]
} ON COLUMNS,
NON EMPTY [Organization].[By Manufacturer].[Manufacturer]
ON ROWS
FROM (
SELECT
{[Organization].[Org Tree].&[2025],[Organization].[Org Tree].&[2040]} ON 0
FROM [MyCube]
/* Test 1 */
EXECUTE(@MDX) at SSASLinkedServer;
/* Test 2 */
DECLARE @ResultsB TABLE (
Manufacturer varchar(255)
, ExtendedServiceCount float
INSERT INTO @ResultsB (Manufacturer, ExtendedServiceCount) EXECUTE(@MDX) at SSASLinkedServer;
Test 1 succeeds, returning expected results, and Test 2 fails returning the error mentioned above.
Other articles I've found so far don't seem to apply to my case. I am not creating any explicit transactions in my code. When I use OPENQUERY, I am able to do the insert just fine, but not when I use EXEC @MDX at LinkedServer.
Unfortunately in some variations of the query, I run into the 8800 character limit on OPENQUERY, so I need to use this other approach.
Any ideas?
-Tab Alleman

Hi Tab,
In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

Providing UDID for 3.0 Activation

Similar Messages

Maybe you are looking for