Provision for Automatic Creation of BP number whenever user id is created

Dear Experts,
Is it possible to create the business partner Number Automatically, whenever a userid is created in Solution manger system, if any custom developments done for the same share the things.
Thanks in Advance,
Regards,
Thirukumaran. R

Hi Keshav,
Thanks for your prompt response,
exits found when creating user id in sap:
ADDRESS_SUBSCREEN
ADDR_PRINTFORM_SHORT
i'm not getting how to generate the bp number automatically, is there any f.m or we have to do it with BDC,
update task means i'm not getting can u explain little clear,
Thanks in Advance,
Regards
Thiru. R

Similar Messages

  • Automatic creation of serial number

    Hello guys,
       In serial number profile, in serializing procedure for PPAU and PPRL i have maintained 4-automatic(creation of serial number) and this serial number profile i have given in workscheduling view of material master.When i create the production order for this material of qty 20,it gives serial number from 1 to 20.And again  i create the production order for it of qty 20,it gives serial number to it from 20 to 40.
       Now my question is,in automatic creation of serial number from where it takes the number ranges.
      Does it take from equipment category which we assign to serial number profile?If not than from where it takes?
             Thanking you guys.

    Dear Jitendra,
    Automatic Serial Numbers come from Number Range Object which is defined in Tcode SNRO. Number range is also defined in SNRO only under number range object for specific purpose.
    You can check in SNRO----> Overview which gives you Overview of Number Range Objects & Number Ranges defined from them.
    So your serial numbers are coming automatically actually defined there only.
    Pls. go through the above.
    Hope this will clarify your doubt.
    If any doubt , pls. revert and reward if useful.
    Regards,
    Tejas

  • Functional module for automatic creation of pur requisition & pur order

    hello,
    what is the functional module for automatic creation of puchase requisition and automatic creation of purchase order which we will assign in action box in service order processing management.
    please let me know as early as possible
    regards,
    rajesh kumar raju

    Hi,
             Please check with following.
    IDOC_INPUT_ACC_PURCHASE_REQUI
    IDOC_INPUT_ACC_PURCHASE_ORDER
    /ISDFPS/OR_PURCHASE_ORDER_CR
    BS01_PURCHASE_DOCUMENT_CREATE
    CO_MP_CREATE_PURCHASE_ORDER
    Thanks & Regards
    Sadhu Kishore

  • Define Control for Automatic Creation of Pick HUs

    We are using full blown HU management and in the customizing for the Control for Automatic Creation of Pick HU's you define the packaging materials to use.  The help in from of this customizing says that if this is blank the system attempts to find a common packaging material for all materials in the transfer order. 
    My issue is that when I leave this blank the packaging material that the system proposes is not the packaging material that is contained on the source HU nor is it the packaging material that is contained in the Packing Instructions.
    How does the system determine the packaging material on the destination HU?  Am I required to maintain a value in this customizing?
    Thanks
    Nick

    I found my own answer so i will give myself many points.  See question to get answer.

  • Backgorund job for automatic creation of billing document

    Dear All
    Could you advise me on how to set up a bacground job for automatic creation of billing document?
    Thanks and regards,
    Sylwia

    In standard, you cannot generate automatic billing but you can set date and time so that you can generate invoices at the specified time in bulk.  The TCode to achieve this is VF06.
    thanks
    G. Lakshmipathi

  • Bacground job for automatic creation of billing document

    Dear All
    Could you advise me on how to set up a bacground job for automatic creation of billing document?
    Thanks and regards,
    Sylwia
    Edited by: S. KOWALSKA on Jan 12, 2009 10:12 AM

    Dear Sylwia
    Please dont post the same question in multiple threads.  You are receiving feedback in the other forum.  Check this link
    [Backgorund job for automatic creation of billing document   |Backgorund job for automatic creation of billing document;
    thanks
    G. Lakshmipathi

  • Disable Automatic Creation of Serial Number at GRN

    Dear Gurus
    All my materials are subjected to serial numbers and the serial number profile is activated in the material master.
    At the time of GRN, the serial numbers to be selected from the already uploaded list.
    But there is a option to craete serial numbers automatically ( a check box to tick at MIGO GRN serial number tab)
    Need to deactivate the same as the users tend to tick this by mistake.
    Please guide me on the process.
    Thanks in Advance.
    NalindaR

    Hi  Nalinda,
    You got solve this question? I have the same problem, and I need disable de automatic creation of serial Number in all transactions, because serials nrs are always external. And I could not do anything with the profile of the serial nr in t-code OIS2.
    You can give me some  information that help in this question.
    Thanks in advance.
    Mary

  • Automatic creation of Transfer Order when a delivery is created

    Hi all ,
    I wanted to have Automatic creation of Transfer Order when a delivery is created ,
    what are the configuration activities that needs to be carried out .
    Thanks ,
    KSR

    Dear Friends,
    I am also facing the same problem; I want the system to create a transfer order at the time of creation of an outbound delivery.
    I have done customization as under:
    Step 001
    Logistics Execution > Shipping > Basic Shipping Functions > Output Control > Output Determination > Maintain Output Determination for Outbound Deliveries > Maintain Output Determination Procedure
    Step 002
    On the screen, u201CProcedureu201D: Overview, choose the following:
    Procedure     Description
    V10000     Header Output
    Step 003
    On the screen, u201CControl datau201D: Overview, enter the following:
    Usage     Application     Procedure     Step number
    B     V2                     V10000     110
    Counter     Condition Type     Requirement     Description
    01     WMTA                     032                     Automatic TA
    The system does not create a transfer order automatically.
    May I request our learned friends to guide me?

  • Automatic creation of BP from SAP User (created manually) in PPM 5.0

    Hi Gurus;
    There are some way to create BP automaticaly from SAP User?
    I know that exits some Function Module BP* can do this automatic creation.
    Someone did this?
    Best regards.
    Mariano

    Hi Rajadurai,
    In the BADI - BUPA_FURTHER_CHECKS implement the method - CHECK_CENTRAL.
    The following code could serve your purpose:
    IF IV_ACTIVITY eq '01'. "Check if it is for creation
      CALL FUNCTION 'BUPR_RELATIONSHIP_CREATE'
       EXPORTING
        IV_PARTNER_1 = IV_PARTNER
        IV_PARTNER_2 = LV_createdby "BP no of the creator
        IV_RELATIONSHIP = 'BUR011' "Code for emp. resp
        IV_DATE_FROM = SY-DATLO
        IV_DATE_TO = '99991231'.
    endif.

  • Long delay for ManagedEventWatcher __InstanceCreationEvent query as number of user sessions increases

    We have a Windows service that monitors for process start events and sends notifications to client applications.
    We have discovered that the delay between when a process starts and when our EventArrivedEventHandler is called gets excessively long when the number of user sessions on the Windows server gets to about 80.
    The delay gets worse as the number of user sessions gets higher.
    The delays are not consistent. Even with 100 sessions some observed delays are short but most are too long and the maximum observed delay grows with the number of sessions.
    Here is one example of the delay we are seeing.
    A client application wrote its first log record to its log file at 11:05:34.076. Our EventArrivedEventHandler did not get notified of the process start event for the client application until 18 seconds later (at 11:05:52.188 ).
    We need the delay to be less than 5 seconds to be tolerable and would like the delay to be less than 3 seconds if possible.
    Is there something we can do to reduce the delay? Below are the details of our use of WMI.
    We are using an instance of class WqlEventQuery to represent a WMI event query in WQL format.
    We are constructing an instance of ManagementEventWatcher to consume events asynchronously.
    Below is how we are instantiating and running the query. Variable m_PollingIntervalInMilliseconds is set to 1000 by default.
                    WqlEventQuery query = new WqlEventQuery("__InstanceCreationEvent", new TimeSpan(0, 0, 0, 0, m_PollingIntervalInMilliseconds), "TargetInstance isa \"Win32_Process\"");
                    m_ManagementEventWatcher = new ManagementEventWatcher(query);
                    m_ManagementEventWatcher.EventArrived += new EventArrivedEventHandler(managementEventWatcher_EventArrived);
                    m_ManagementEventWatcher.Start();
    Our Windows service is not the only user of WMI services on the server. I do not know if there is contention with other users of WMI services or if there is something about the way we are consuming WMI services that is inefficient.

    Hello RossAtWFMC,
    It seems that the services are working with a complex environment, and currently, we do not have such an environment which could reproduce this issue you described. Anyway, I would like to share whatever I found and some suggestions about this issue:
    >> called gets excessively long when the number of user sessions on the Windows server gets to about 80.
     The delay gets worse as the number of user sessions gets higher.
    This seems to show that the issue is related with the number of user sessions, it may be that when with lots of user sessions, there are something additional delay the event to be fired. As you mentions, there are other services on that server machine, if
    possible, you could make a test to run your WIM service only to see if it is still delayed.
    >> Is there something we can do to reduce the delay?
    I suggest that you could check this blog below which provide a way to debug with the .NET course code:
    http://blogs.msdn.com/b/dotnet/archive/2014/02/24/a-new-look-for-net-reference-source.aspx
    So that you could know which method inside costs most time.
    From your provided code, it is not very clear if you use multi threads in your service, if not and your event handler is short, you could have a try with it, and there is a discussion about this topic:
    https://social.msdn.microsoft.com/Forums/en-US/13f30e33-7f61-498e-a91a-ef982a63453c/event-handling-in-multithreaded-apps?forum=netfxbcl
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Exit for automatic creation of line items in VA01

    Hello All,
    I have a requirement wherein I need to create next blank new line item (with predefined line item no) upon creation of one line item. When user opens sales order creation screen there should be default line item (say line item no 10) created. If user fills data in item 10 & press enter exit should create next line item (say item 20) automatically.
    Currently line item get created after user enter item details. I want this to happen before user enters data.
    Regards,
    Abhijeet more

    There is a customizing for this. You can also make it using MV45AFZZ but really difficult coding. You must debug what system do while you create a line item manually then u need to use every routine which system uses and even there is no error message it's still possible that you'll face with inconsistencies in billing.
    I don't suggest you to try this using exit, unless you have 2-3 years SD experience. Best thing to do is inspecting customizing part.
    Edited by: Gungor Ozcelebi on Jul 15, 2009 9:20 AM

  • Project settlement to CO-PA and BAdI for automatic creation of rules

    Hello SAP experts!
    I have managed to implement settlement rule strategy to CO-PA for sales project WBS-elements, which automatically creates the settlement rules for WBS-elements with billing indicator. One or more sales order items are assigned to the WBS-elements. When the system derives settlement rules, it generates profitability segments that contain the characteristic values of the WBS elements and the sales orders assigned to them. The problem is, that only one single settlement receiver is determined for each WBS-element. And if more that one sales order item is assigned to the same WBS-element only those characteristics are copied to the settlement rule that are same in all sales order items.
    For example; it products are different in all sales order items, the automatically created settlement rule does not contain the characteristic value product or neighter other caracteristics derived from product.
    Do You have experience of using BAdI for influencing the generation of settlement rules? What it actually makes possible?
    Br, Nina

    Dear Waman,
    thank you for your reply !
    Yet - this still does not solve our problem. In that note (and also in the related note 201445) there is no valuable information included concerning transaction currency:
    Our WBS elements (and also other cost objects, e.g. sales order items) are being debited in all of the three currencies.....but the credit (during settlement) only takes place in two of them:  object and CO area currency.
    I really appreciate additional help on this. It would be hard to believe that we are the only SAP customer having this kind of problem.
    Best regards,
    Thomas

  • Automatic Creation of primary key at the time of creating entries

    Hi All,
    I have a requirement to generate the primary key automatically at the time of creating entries. I have managed to do so by writing an event code for the maintainance object in SE54.
    However called only when I create entries throught the Maintainance View.
    It does not get called when I write an insert statement in the program.
    Please suggest a way to achieve this.
    Thanks in advance,
    Archana.

    for assigning the primary key while using insert statement, write a piece of code to get the last pk value, increment it by 1 and then assign this value to the pk field of the next record while inserting. if you are using a fn mod to insert values, just have this piece of code right before the insert query. a better way would be to use a GUID which will be unique globally. there is a fn mod GUID_CREATE which you can use to generate GUID. i don't think there is a way to automate this while making entries using se11, unless you change the code that actually creates the entry in the database.

  • Automatic creation of PO's from Requisitions

    Hi
    I'm trying to get a grasp of what's needed to automatically create approved PO's upon approval of a requisition.
    There seems to be two ways to do it, a release program under a Contract Agreement, or using workflow with a Global BPA.
    Under either method, would you need to create a Contract Agreement or Global BPA for each and every supplier? Is there any easier way to achieve this?
    Thanks

    To automatically created Approved PO's you will need the following
    1. To create Standard PO's a Requisition will have to use a Quotation. This quotation can be attached to an ASL to default while creating a req
    The Workflow "PO Create Documents" should have automatic creation allowed set to yes
    2. To create Releases a Blanket PO must be attached to an ASL . The Workflow "PO Create Documents" should have automatic creation allowed set to yes
    Please let me know if you have any questions
    Thanks
    Navin

  • Automatic Creation of Planned Order in PPDS Horizon

    Dear Experts,
    Kindly answer my following query.
    I have created PIRs before/inside my PPDS Horizon (its also falling outside horizon as SNP horizon is shorter than PPDS Horizon). If I check the PIRs created by me in /SNPAPO/RRP3, it also shows me planned orders corresponding to them. However, if I create PIR outside PPDS horizon then system is not automatically creating the planned order.
    Kindly let me know which master data/configuration setting is responsible for automatic creation of planned orders within PPDS horizon.
    Best Regards
    Rinju
    Edited by: Rinju Mukherjee on Sep 26, 2010 10:05 AM

    Dear Rinju,
    Check in Product Master PPDS view the Planning procedure maintained? if it is balnk check in the heuristic, the palnning procedure maintained.
    Since automatic planning procedure(3) is maintained, that is the reason it is creating order proposals, it self.
    Sree

Maybe you are looking for