Provision for capacity alerts for Exchange 2010 servers on SCOM

Hi All,
This is one urgent requirement, please help. 
We have around 25 exchange servers in our environment, we need to configure alerts to limit the threshold to 80-90% of mailbox.
My requirement is to configure SCOM alerts for mailboxes hosted on databases servers. In our environment we have set that a database should contain 208 mailboxes. So we need to have alert when mailbox limits reaches to 80% or 90% (say 180 mailboxes in number).
Please let me know hw to configure this alert and thresholds in SCOM?
Best Regards,
Harsha L P

 Hi,
Have you import the Exchange management pack to your maagement group?
We may need to check the management pack guide to find if there is any monitor or rule which can do this.
Regards,
Yan Li
Regards, Yan Li

Similar Messages

  • How to use Powershell to set delegate for user mailbox in Exchange 2010 and Office 365

    Hello,
    Can you please tell me if I can set delegate for user mailbox in Exchange 2010 or Office 365 using Powershell?
    If I can, then how can I do that? (which Powershell commands for setting the delegate?)
    Many thanks, and have a good day!

    Hi,
    If you wanted to add a delegate to possiblly a large number of users or you do this during mailbox provisioning. So the following script will use
    impersonation to access another users mailbox and add a delegate.
    $mbtoDelegate = "[email protected]"
    $delegatetoAdd = "[email protected]"
    $dllpath = "C:\Program Files\Microsoft\Exchange\Web Services\1.0\Microsoft.Exchange.WebServices.dll"
    [void][Reflection.Assembly]::LoadFile($dllpath)
    $service = new-object Microsoft.Exchange.WebServices.Data.ExchangeService([Microsoft.Exchange.WebServices.Data.ExchangeVersion]::Exchange2007_SP1)
    $windowsIdentity = [System.Security.Principal.WindowsIdentity]::GetCurrent()
    $sidbind = "LDAP://<SID=" + $windowsIdentity.user.Value.ToString() + ">"
    $aceuser = [ADSI]$sidbind
    $service.AutodiscoverUrl($aceuser.mail.ToString())
    $service.ImpersonatedUserId = new-object Microsoft.Exchange.WebServices.Data.ImpersonatedUserId([Microsoft.Exchange.WebServices.Data.ConnectingIdType]::SmtpAddress,
    $mbtoDelegate);
    $mbMailbox = new-object Microsoft.Exchange.WebServices.Data.Mailbox($mbtoDelegate)
    $dgUser = new-object Microsoft.Exchange.WebServices.Data.DelegateUser($delegatetoAdd)
    $dgUser.ViewPrivateItems = $false
    $dgUser.ReceiveCopiesOfMeetingMessages = $false
    $dgUser.Permissions.CalendarFolderPermissionLevel = [Microsoft.Exchange.WebServices.Data.DelegateFolderPermissionLevel]::Editor
    $dgUser.Permissions.InboxFolderPermissionLevel = [Microsoft.Exchange.WebServices.Data.DelegateFolderPermissionLevel]::Reviewer
    $dgArray = new-object Microsoft.Exchange.WebServices.Data.DelegateUser[] 1
    $dgArray[0] = $dgUser
    $service.AddDelegates($mbMailbox, [Microsoft.Exchange.WebServices.Data.MeetingRequestsDeliveryScope]::DelegatesAndMe, $dgArray);
    Hope this helps.

  • OOF not working for mailboxes homed on Exchange 2010 server during migration

    Hi There
    I'm troubleshooting an issue during a exchange 2010 to exchange 2013 migration where the OOF is not working for users homed on the exchange 2010 mailbox servers. This applies to users using outlook 2010 and outlook 2013 .OWA works perfectly and you can also
    enable OOF via exchange powershell.
    Users homed on the exchange 2013 servers does not have any issues.
    The exchange 2010 servers is on SP3 rollup 4 and the 2013 servers on SP1 only without any rollups installed.
    So my question will be - have anyone experienced this issue during migration and will patching the exchange 2010 servers to rollup 5 or 6 and the exchange 2013 to sp1 rollup 5 fix the OOF issue then? If requested the client to patch to these levels, but
    in the meantime I'm checking if anyone else had similar issues.
    Any pointers will be welcome.

    Hi ,
    1.Please check the problematic exchange 2010 user account can able to access the ews virtual directory internal url and you can check that via browser's.It will prompt for the user name and password , please provide that .
    EWS url wopuld be like - https://mail.youdomain.com/EWS/Exchange.asmx
    2.Then the second step would be autodiscover check for the problematic user account.you can find that via test email configuration .There you came to know whether outlook is fetching up the proper url for ews and autodiscover.
    3.Then please un check the proxy settings in browsers and check the same.
    4.please use the command to check the auto discover 
    test-outlookwebservices
    Please check the below links also.
    http://exchangeserverpro.com/exchange-2013-test-outlook-web-service/
    http://www.proexchange.be/blogs/exchange2007/archive/2009/07/14/your-out-of-office-settings-cannot-be-displayed-because-the-server-is-currently-unavailable-try-again-later.aspx
    http://port25guy.com/2013/07/20/user-cannot-set-an-out-of-office-in-exchange-20102013-or-eventid-3004-appears-in-your-event-log/
    http://www.theemailadmin.com/2010/06/exchange-server-2010-out-of-office/
    Regards
    S.Nithyanandham
    Thanks S.Nithyanandham

  • Certificates for Office 365 Hybrid Exchange 2010 Exchange Online v15

    Certificates for Office 365 Hybrid Exchange 2010 Exchange Online v15
    We need to set up a hybrid server to allow us to begin moving mailboxes to Exchange Online. We created a new Server 2012 R2 server with Exchange 2013 SP1 to act as our Hybrid server. Reading the literature leaves me with questions about what
    certificates I need.  My understanding is that the certificates in play on the on-premise Exchange 2010 servers don't need to be changed.
    I've looked at the TechNet article "Certificate requirements for hybrid deployments" 
    http://technet.microsoft.com/en-us/library/hh563848(v=exchg.150).aspx
    Certificate requirements for the new Exchange 2013 SP1 server are still unclear to me, I think the new server needs a SAN certificate with:
    Hybridserver.domain.edu
    autodiscover.domain.edu
    EWS.domain.edu
    Can anyone clarify?

    Cert is required only if you want to deploy ADFS for SSO.
    Otherwise you can use your existing Cert for all the Services
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Is it possible to monitor a particular Exchange 2010 mailbox via SCOM if 30 or more emails trigger in 30 minutes in the inbox and alert should be generated

    Is it possible to monitor a particular Exchange 2010 mailbox via SCOM if 30 or more emails trigger in 30 minutes in the inbox and alert should be generated for that.
    If this is not possible in SCOM. Is there another way we can do it via power shell or any thing.
    Gautam.75801

    Hi,
    We may need to create script based rule using PowerShell or VBScript.
    Please go through the below links for command get-mailboxstatistics:
    Exchange 2010 : http://community.spiceworks.com/topic/122241-scripting-to-count-all-of-the-messages-in-a-mailbox
    Regards, Yan Li

  • SCOM health check on Exchange 2010 servers

    Hi,
    Does SCOM have any built-in function to perform
    health check on Exchange 2010 servers?

    You can check health check of Exchange 2010 by install management pack of Exchange 2010.
    Here's management pack of exchange 2010
    http://www.microsoft.com/en-us/download/details.aspx?id=692
    Before Import management Pack and how to configure it, you can check below link
    http://technet.microsoft.com/en-us/library/ee758051%28v=exchg.140%29.aspx
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

  • Issue with SLA reports of Exchange 2010 MP in SCOM 2007 R2 !!

    Hi,
    I have issues with Exchange 2010 MP SLA reporting. Whenever report is run it fails on some or the other dataset(Outage**,SLAbyDAte etc.) When I digged in, I found that it is connecting to DW Exchange 2010 Availability tables + Planned maintainance +
    outage table. The tables were not available in the DW, not sure how it got removed. Initially I tried by uninstalling and installing MP(Exchange 2010  & Exchange 2010 reports both) if relevant tables get created automatically but it did
    not help and I was still facing the same issue. Then I tried to create the tables manually and check if it could resolve the issue. There was unique ID associated(different in different computer) with the name of most of the tables. I tool it from Exchange
    report data source which exists in reporting server. But I could see that table remain empty with no records there and SLA report start giving different issues stating table instances do not exist.
    Could anyone help me to restore the SLA report of Exchange 2010 MP ? How should I ensure that data start populating the tables ? I am also helpless here because we do not have correct DW dump to restore back to earlier when it was working fine.
    //BR

    Hi,
    Based on my research, to correctly install the Correlation Engine, consider the following when you install the Exchange 2010 Monitoring Management Pack:
    Determine which server will host the Correlation Engine. While not strictly required, it's strongly recommended that the Correlation Engine be installed on the Root Management Server computer.
    Make sure that you download and install the Exchange 2010 Management Pack that matches the operating system for the selected server. You can install the 32-bit or 64-bit version.
    Make sure that you run the Microsoft Installer (.msi) package on the server where you want the Exchange 2010 Management Pack and the Correlation Engine to be installed.
    After the installation is complete, the Correlation Engine service will have been installed on the server, and the Management Pack files will have been copied to the
    System Center Management Packs folder. By default, the installation directory is C:\Program Files\System Center Management Pack.
    Quote from:
    http://technet.microsoft.com/en-us/library/ee758051(v=exchg.140).aspx
    In addition, here is a similar thread for your reference:
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/e75e84d9-0c9e-4d83-b3da-45a143757f85/exchange-2010-monitoring-with-scom-2012-correlation-service-issue
    Regads,
    Yan Li
    Regards, Yan Li

  • Sequence for shutting down Exchange 2010 Servers

    I have 3 mailbox servers, 3 CAS servers, 3 hubtransport servers, in active production, and I have 3 mailbox servers, 3 cas servers, and 3 hubtransport servers, as a DR.  I have a DAG between them and a Cassarray
    These Servers are virtualized using vmware.
    I need to know microsoft's BPA for shutting down these servers to move to another location.

    Follow these- are you completely shutting down the server or planning to do the maintenance.?
    http://exchangeserverpro.com/forums/exchange-server-2010/3186-datacenter-power-shutdown-need-shutdown-all-exchange-servers.html
    http://www.kreslavsky.com/2011/04/shut-down-exchange-2010-dag-member.html
    The correct way to perform any maintenance is to run first  StartDagServerMaintenance.ps1 script that is located under “C:Program FilesMicrosoftExchange ServerV14scripts”
    This script moves all the active databases to next preferred DAG server and prevents active databases from moving to that server during the maintenance.
    In addition the script ensures that all critical DAG support functionality that may be on this server has been moved to next proffered server
    Once the DR site servers are in maintenance mode you can bring the serves down in DR site first, CAS and then Hub.
    And then on the Primary Site shutdown the CAS and HUB, Dismount the DB and shutdown the servers.
    Where Technology Meets Talent

  • Best Practices for patching Exchange 2010 servers.

    Hi Team,
    Looking for best practices on patching Exchnage Server 2010.
    Like precautions  , steps and pre and post patching checks.
    Thanks. 

    Are you referring to Exchange updates? If so:
    http://technet.microsoft.com/en-us/library/ff637981.aspx
    Install the Latest Update Rollup for Exchange 2010
    http://technet.microsoft.com/en-us/library/ee861125.aspx
    Installing Update Rollups on Database Availability Group Members
    Key points:
    Apply in role order
    CAS, HUB, UM, MBX
    If you have CAS roles in an array/load-balanced, they should all have the same SP/RU level.  so coordinate the Exchange updates and add/remove nodes as needed so you do not run for an extended time with different Exchange levels in the same array.
    All the DAG nodes should be at the same rollup/SP level as well. See the above link on how to accomplish that.
    If you are referring to Windows Updates, then I typically follow the same install pattern:
    CAS, HUB, UM, MBX
    With windows updates however, I tend not to worry about suspending activation on the DAG members rather simply move the active mailbox copies, apply the update and reboot if necessary.

  • Active Sync Not Working for NEXUS MOBILE in Exchange 2010 SP3 Enivironment..

     HI Exchange Techy's.
    We have Exchange 2010 SP3 Servers. Now All mobiles are working fine Through Active Sync Except Google Nexus. 
    Problem: Account has been activated successfully in Mobile, But Mails are not synchronized.  
    Kindly help fix me out of this problem.
    We are welcome & Appreciate who are giving Comments & Solutions for this problem.
    Regards,
    One of your Exchange Person
    B@[email protected]

    Hi,
    I'd recommend asking your question over here:
    https://social.technet.microsoft.com/Forums/en-us/home?forum=exchangesvrmobilitylegacy&filter=alltypes&sort=lastpostdesc
    This forum is meant for feedback on the TechNet website/subscriptions, not product support.
    Good luck.
    Don't retire TechNet! -
    (Don't give up yet - 13,085+ strong and growing)

  • How to create a notification subscription to send email for all alerts except exchange objects related alerts.

    Hi Team,
    We have notification subscription configured currently, which will send email notification for Central team for all alerts generated in SCOM. Recently we got complaint from messaging(exchange server) team, that the exchange related email notifications are
    going to other teams.
    How shall we exclude "All exchange 2010 entities" group from current subscription.
    Thanks,
    Dinesh
    Thanks &amp; Regards, Dinesh

    Hi
    There is no functinality to exclude objects in notifications. You would have to select everything that you want to be alerted on. Either you select all Groups, classes or split up the subscription per "Technology" like SQL, IIS etc. and select
    the corresponding MPs to be alerted on like all rules and Monitors.
    Probably selecting the classes would be the best option
    https://social.technet.microsoft.com/Forums/systemcenter/en-US/7e8a5d4a-1727-4448-a2d8-85950645e01a/notification-subscription-by-management-pack
    This might help also
    http://blogs.technet.com/b/kevinholman/archive/2008/06/26/using-opsmgr-notifications-in-the-real-world-part-1.aspx and
    http://myitforum.com/myitforumwp/2014/03/04/system-center-operations-manager-2012-r2-generating-notifications-by-management-pack/
    Cheers,
    Stefan
    Blog: http://stefanroth.net If my post helped you, please take a moment to vote as helpful and\or mark as an answer

  • Best practices for using AUTOARCHIVING in Exchange 2010

    Hi guys!
    Exchange 2010 SP3 environment. We have 150 users. We bought two 2TB in RAID1 disk and they Will be used for Autoarchive DB's. We have currently about 10 Production DB's named by department. We have created 10 Archive DB's named by department and added Word
    ARCHIVE at the end of the databasename.
    We have 150 users. Some of them (let's say 50) are having 20 - 30 GB of PST files, all the others have about 4-5GB PST files.
    What would be the best practise for putting quota restrictions? As I can see by the default a user is limited with 50GB per archive mailbox. In this scenario where 50 users have more then 20GB+ PST files long, and all the other less then 4GB what would
    be the best practise for setting up quota limitation on newly created 10 ARCHIVE db's to achieve optimal solution?
    with best regards,
    bostjanc

    Hi,
    As far as I know,  by default, in Exchange 2010 SP1, the archive warning quota is set to 45 gigabytes (GB) and the archive quota is set to 50 GB. And we can depend on the following command to set the quotas for all mailboxes in one database:
    Get-Mailbox -ResultSize Unlimited | Where {$_.ArchiveDatabase -ne $null} | Set-Mailbox -Archive Quota 20GB -ArchiveWarningQuota 19GB
    Please note that this is not at database level but mailbox level.
    For more information, you can refer to the following articles:
    http://technet.microsoft.com/en-us/library/dd979795.aspx#AQ
    http://social.technet.microsoft.com/Forums/exchange/en-US/599b2871-6fcc-482f-845b-b59dec342097/usedatabasequotadefaults-for-archive-mailbox?forum=exchange2010
    Thanks,
    Angela Shi
    TechNet Community Support

  • Created mailbox for new user in Exchange 2010, user not visible in AD.

    Hi everyone!
    This morning I created a mailbox for a new user on my Exchange 2010 box.
    Everything works fantastically but I am unable to view the new user in AD except by searching.  If I run a search the results say the user exists in my Users container, and I can view the properties of the user account from the search results, but I
    am unable to actually see the user profile object in the Users container.
    I notice in EMC that the mailbox has a user icon on the mailbox icon instead of the regular standard icon - I'm not sure what this implies.
    Can anyone offer some advice as to why this happens and how to resolve it?
    Thanks!

    Hi,
    AD objects store in the Domain partition Database.
    Its replication Scope is :Domain Wide
    Its replication model is: Multi Master
    There are two possible cause.
    1. AD replication latency if you have several DCs.
    You could wait for AD replication or force replication, Click
    refresh on ADUC.
    2. You create the new user
     in other OU, not  Users.
    You could run this command to get
     the user’s DistingushedName attribution.
    Get-mailbox –identity
    [email protected] |fl
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • OWA still lands at Exchange 2010 for users migrated from Exchange 2010 to 2013

    I never had any issues with OWA redirection for a few users that I migrated from Exchange 2010-2013 initially. For users that I am migrating in the past few days, the OWA 2013 is landing on Exchange 2010 despite the mailbox being successfully migrated to
    Exchange 2013.
    Troubleshooting:
    1. I have restarted the IIS Services
    2. I have restarted MSExchangeOWAAppPool.
    3. I have also checked the homeMDB attribute of the 2013 migrated user with the Exchange 2013 database.
    I would really appreciate if anyone could share their experiences on similar issues.

    I have checked it, the migration status is completed. In regard to the namespaces, both CAS 2010 and 2013 are set to mail.domain.com; CAS 2013 is the internet facing. I have also checked the internal access for OWA, it's the same scenario. Migrating them
    back to 2010 and 2013 won't resolve the issue in my case, because the issue persists for every new user that I am migrating.
    I recently found the following when I login with a user who is not effected and then logout:
    1. Login in back with the affected user without closing the browser or clearing the cache, it lands at CAS 2013 OWA.
    2. However, I get the below listed error message when I logout. 
    Your request couldn't be completed.
    Click here to continue working.
    This may have occurred for security reasons or because your session timed out.

  • Outlook 2013 asks for credentials connecting to Exchange 2010 multiple times

    I'm having a problem with Outlook 2013 asking for my credentials a few times a day for no apparent reason. Some info on my setup...
    CLIENT
    Windows 7 Professional SP1 64 bit, fully patched
    Office 2013 Pro Plus 32 bit, fully patched (has there even been any patches released yet?)
    Outlook auto-configured to Exchange during setup.
    Online Archive setup with server
    Connected via gigabit ethernet on same network and domain as Exchange server.
    SERVER
    Exchange 2010 SP2, fully patched.
    One server, holds all roles.
    I have zero clue as to why I'm getting popped for credentials. This did not happen prior to my upgrade to Office 2013. I was previously using Office 2007 Pro Plus.
    My credentials are always accepted, never a problem putting them in.
    Thanks in advance!

    I have been testing and testing also for days, then waiting for any responses to other people's questions on other places as well.
    After some time started my own tries again.
    Now I fixed my issue - don't fully comprehend it. But anyway here comes the solution that worked for me (and hopefully for more of y'all)...
    Go to the Exchange account from within Outlook, click special settings, tab connection. Open up the button proxy settings, UNtick options 3 and 4 (connections with HTTP/then TCP/IP). Make sure to UNtick both.
    Press OK, Hit Save and OK again. Press NEXT and close the screens.
    Logout from Outlook. LOG OFF your RDP session if you're in one. Restart the RDP session after some 15 seconds. Or start Outlook if you were only in Outlook.
    My issue was then solved.

Maybe you are looking for

  • No fontset found error

    I am trying to get my webcam working it's a Creative Live! Cam Notebook Pro.  I installed the gspcav1 package and have added gspca to my rc.conf file.  Ekiga and xawtv do detect it, and lsusb shows: Bus 001 Device 004: ID 041e:4051 Creative Technolog

  • Graphic error in 10.2.1

    Ever since the update to 10.2, I noticed that if iTunes opens and it is not the window in focus, some of the colors were off in parts of the screen. I have recently discovered this is what happens in the Mini Player when it is not selected as the top

  • What port type should i use?

    I am using Seebeyond as middleware and it sending Vehicle IDoc VEHCLE01 to SAP System. Please help me what should port type I need to use? Should it be file port or t-rfc port? What should partner type need to use? Can it be LS type? Is it ALE or EDI

  • Please suggest how can we verify file format using SSIS 2008 .

    We have ragged files placed in directory which need to be loaded into DB. Before loading we need to validate the file format before loading. The file schema is as follows. 01 XREF_RCD. 05 XR_JOB PIC X(4). 05 XR_PHASE PIC X(2). 05 XR_DATE PIC X(6). 05

  • IE Erros on this webpage might cause it to work incorrectly

    When hover the mouse on Save and Close button on sharepoint, can see javascript:SubmitForm(), click the button, below error return. It only happen on IE browser. To run as another domain account on same PC, it works without such error. And I can use