Provision for Smartview

I'm using Windows 2003 Server SP2 with MS SQL 2000. I've configured Shared Services and Essbase components. Added 3 users in EAS Console and administrator access has been given to them and then again added 1 more user with user access ie) create and delete application. Then, done externalize users from Essbase to Shared Services. It was successful. I can connect 3 users which was given administrator access to the SmartView. But, couldn't connect another 1 more user which was given user access.
What is the necessary steps for the users to access SmartView. Please advise.
Thanks in advance
SM

Thank you John. After providing Server Access, all the users can able to access SmartView. But, all the applications and database are visible for all the users. For ex: if the user wants to access only one database through SmartView, is it possible. I've tried by giving Application Manager access only to the application "Sample". But, can able to access all the databases. Is there is any other way of doing this.
Thanks in advance
SM

Similar Messages

Maint. Provision for Billing

Dear All,
Our customer have special requirement for maintain ace provision at the billing document level. And accounting entries as per below, I tried with creation of new condition type and Accounting key but it's not working. If possible, please guide me to fulfill the requirement.
1. When Delivering Goods to Customer
Accounting Entry:
Dr Cost of Goods Sold 100
Cr Finished Goods   100
2. When billing to customer
Billing price is 150
Accouting Entry
Dr Customer 150
Cr Sales   135
Cr Provision for Projects 15 (10% on 150)
Thanking you,
Regards,
Kamlesh Panchal

Hi,
In this case, you should not post the basic price condition type. You may need to have two different condition types from which you basic price splits based on this percentage.
Thanks
Krishna.

"Device is not provisioned for carrier billing"?

I have recently in the past couple weeks started having this issue. I upgraded to the Samsung galaxy s3 from my droid razr and after doing so i was able to bill four transactions o my account via carrier billing in Google play. That was on the last billing cycle in which I only accumulated about 14 dollars in fees, not close to the limit. The last bill has been sent off and Verizon should receive it tomorrow. When I am on my 4g lte connection and I load up the purchasing options to purchase an app, before selecting any type of payment I get an error in red print that reads "Your device is not provisioned for carrier billing. Contact your mobile operator." Upon contacting Verizon, billmycarrier (third party billing company), and Google, everyone is telling me that I am fine on their end. After contacting Google again they have personally tried a purchase on my account to carrier and got the error saying the payment was denied by the carrier. It passed Google's payment but not the carrier's. I have no blocks on my account but have recently had a change to my account making my phone eligible for global carrier support that was done by Verizon without any consent from my grandpa or myself for my line. Could this in any way maybe effecting the billing? After contacting Verizon again I still at the moment have no answer. Please if anyone else has had this issue please help me. Or if a Verizon representative has the knowledge of what is going on please contact me asap.

Hi eao76monte! I'm so sorry to see that this matter has visited you, too. I see that Matthew asked for a private message to get the account information of the post originator. I recommend you do the same with me.
Here are the instructions for setting a follow to allow direct messaging: http://vz.to/1gBiqkv
DionM_VZW
Follow us on Twitter www.twitter.com/vzwsupport

Service entry sheet:No provision for service entry for purchase order

Hi.I create a Purchase order with one item.The Item category was D(Service).Also lines of Service number was input in the Service tab of the item detail.After save the Purchase order,I goto t-code ML81N to Maintain the Service entry sheet.When I input the Purchase order number and item number and press enter,the SAP raise an error message box with following text:
No provision for service entry for purchase order 4500000149 00010
Message no. SE198
Diagnosis
The "GR =NO" (no goods receipts) indicator has been set in the PO item. It is thus not possible to enter services against this purchase order.
I don't know why and how to resolve this problem.So I need the experts to give me some advice.Thank you so much.
Regards
Yoda

pls check in ur PO at item details in delivery tab whether goods receipt checkbox is unticked.if yes then tick it and then process.
regards,
indranil

Provision for Amortisation as open item management account??

Hi Friends,
related to previous question ..what about the Provisions accounts
for ex Provision for amortisation ..Pro.Gratuty ..Prov.Leave salary.
Provision for Interest Tax
Provision for Staff Remuneration A/c
Provision for Taxation
Provision for Wealth Tax
Deferred Tax Liability A/c.
Provision for DIVIDEND PAYABLE
Provision for DIVIDEND TAX PAYABLE
Provision for Interim Dividend A/c
Provision for Other Financial Liabilities
Provision for Other Payables
Provision for Proposed Dividend
Provision for Tax (MAT)
For all above accounts can we manage as OPEN ITEM managed accounts???
pls clarify me
regards,
shashi.

Hi,
Provision is expenses account, means it's P&L. so it's not advisable to use open item management due to:
Accounts that are managed on an open item basis:
Clearing accounts:
Bank clearing account
Payroll clearing account
Cash discount clearing account
GR/IR clearing account
Hope this will solve ur problem.
TQ
Regards,
Nazrul

Best practice for Smartview when upgrading from Excel 2003 to Excel 2007?

Does anyone know the best pratice for Smartview when upgrading from Excel 2003 to Excel 2007?
Current users have Microsoft Excel 2003 with Smartview 9.3.1.2.1.003.
Computers are being upgraded to Microsoft Excel 2007.
What is the best pratice for Smartview in this situation?
1. Do nothing with Smartview and just install Excel 2007.
2. Install Excel 2007 and then uninstall and reinstall Smartview
3. Uninstall Smartview, Install Excel 2007, and then install Smartview
4. Somthing else??
Thanks!

We went with option 1 and it worked out fine. Be aware that SV processes noticeably slower in Excel 2007 than 2003. Many users were/are unhappy with the switch. We haven't tested SV v11 yet, so I'm not sure if it has improved performance with Excel 2007 or not (hopefully it does).

Provision for Approval process

Dear Experts,
I have a requirement "To be able to provision for Approval process by FInance, when role of business partner upgraded from prospect to customer"
I guess this is done through Workflow concept. but I don't have Idea in detail.
Looking forward for reply
Regards
Manu

About your questions...
1. According to my knowleadge there is no such standard functonality. But I implemented something similar in our company in the folowing way:
- prospect is created in CRM
- when prospect needs to be transformed to customer, salesman issues task with filled questionary
- finance departments receives this task and if it agrees transforms frospect to customer in ERP with VA07
2. If you mean that only certain data should be maintained by certain companies, then only via coding this could be achieved.
3. If you mean that in relatonship you define, to which organization contat person belongs, then I'm not sure. Never tried it. For employees I know it is possible so robably it could be done also for contact persons.
4. You can store documents. But if you want to have special access to this documents, then this would not be the case.
5. Yes. You can use account hierarchies for that.
Regards.

GRC AE User provisioning for Portal giving error

Hi,
We are having GRC AC 5.3- SP9.
While doing user provisioning for Portal, we are getting the following error: DBCacheVerifier.java@58:isExpired(). Detailed error log is attached herewith. The back end system (EP Dev) is installed with GRC RTA. Connectors are testing OK. The CPIC user id in backend system EPDev is ED1GRC and has SUPER ADMIN Authorizations, with SPML read/write actions attached to the Role. EP Dev system is having UME as data source, not LDAP. The issue was existing even before the SP9 upgrade. We have restarted the Server several times lately. Pls help me in this.
Thanks & Regards,
Jagadish H S
BASIS Team, BPCL, Mumbai.

Jagadish,
This type of error would normally be a data setup issue. Have you imported all of the initial data files (XML ones)?
Otherwise, if it is just a cache issue, then restarting the server would normally solve the proplem. I would also check the Java Netweaver Admin console to ensure that the memory settings are sufficiently configured to match the hardware that is deployed.
Simon

Dropdown list (predefined list) along with provision for user to enter text

Hi,
Is there any provision in J2ME to have
" a drop-down list , which contains predefined variables. if the user does not want to use those predefined variables, then a provision for user to enter text."
thanks in advance

Append Method
I would create a box / div in Animate then when you publish it and put it on your page just append a form with an email input ( <input type="email></input>" ) and submit button.
<form action="url">
<input type="email" name="usremail">
<input type="submit">
</form>
This page provides a lot of information on how to use Edge Animate and how to do more advanced things.
http://www.adobe.com/devnet-docs/edgeanimate/api/current/index.html

Export shared service active users (provision for Hyperion)only using MSAD.

Hi..
I m using Hyperion 9.x . and using active directory in shared services.
while i m using importexport utility to export the active users list with provisioning.
Issue is :
Hyperion external authentication have all users of Active directory but i need to export only active users which are provisioned for Hyperion projects .
I dont need the complete users list .
Also i m unable to export the provisioning of users in exported file.
Please can you help me in getting the correct export statement for the above.
Thank you very much

Thanks John !!
I am using the following statement for 9.3.0 but not getting provisioning section in exported file.
Only users/Groups/Roles are there in exported file.
Please help me to overcome the problem .
importexport.css=file:/C:/Hyperion/SharedServices/9.3/AppServer/InstalledApps/WebLogic/8.1/css.xml
importexport.cmshost=HSS machine name
importexport.cmsport=58080
importexport.username=User name **User name i m using is Active Directory user with administrative rights in Hyperion**
importexport.password=password
importexport.enable.console.traces=true
importexport.trace.events.file=C:/Hyperion/common/utilities/CSSImportExportUtility/importexport/trace.log
importexport.errors.log.file=C:/Hyperion/common/utilities/CSSImportExportUtility/importexport/errors.log
importexport.locale=en
# export operations
export.fileformat=csv
export.file=C:/export.csv
export.internal.identities=true
export.MSAD.user.passwords=true
export.provisioning.all=true
export.delegated.lists=false
export.user.filter=*@MSAD
export.group.filter=*@MSAD
export.role.filter=@MSAD
export.producttype=*
export.provisioning.apps=*
Thank you very much
Vivek Jaiswal
Edited by: user11966901 on May 25, 2010 8:16 PM
Edited by: user11966901 on May 25, 2010 8:19 PM
Edited by: user11966901 on May 25, 2010 8:20 PM

Use Firefox for sensitive data & use a virtual keyboard plus internet antivirus. This current version does not allow such or an extension . Can you make provision for this?

Use Firefox for sensitive data & use a virtual keyboard plus internet antivirus. This current version does not allow such or an extension . Can you make provision for this?

Use Firefox for sensitive data & use a virtual keyboard plus internet antivirus. This current version does not allow such or an extension . Can you make provision for this?

Provision for editing Sold-to-party

Provision for editing Sold-to-party code in SO for Export sales only. Once the order is copied from Draft or Quotation, User should be able to change the sold-to-party for Export orders.
Is there any standard configuration available or any USEREXIT or BADI ?
Regards
Jalaj

Hi jalaj001,
--Go to T.Code VTAA
--Select your QT & OR document
--In header you will find the copying req as 001-header same customer
--Change it to 002 for different customer & save it
--Go to T.Code VA01 & raise the order with reference to Quotation
--Now you can change the sold-t-party customer.
Let me know if your problem is solved
Regards
Pradeep

CUP 5.3: Automated Provisioning for UME Roles

Hi,
Does CUP 5.3 provide automated provisioning for UME roles or just for R/3 roles?
Thanks in advance. Best regards,
Imanol

In order to use UME provisioning though, the WebAS must have Portal components installed (not necessarily used). The Portal RTA uses the Portal's SPML interface that is installed with portal components.
And please make sure to check the PAM - I think the Portal RTA only works for 7.00, if I'm not mistaken!
Frank.

Does "SSAUDIT" works for Smartview update in "Ad-hoc analysis" mode?

Dear guru,
Would like to know if "SSAUDIT" works for Smartview update in "Ad-hoc analysis" mode?
The requirement is that we would like to know which user and when they have updated the application by submit data with some pre-defined smartview worksheets (in ad-hoc analysis mode).
Seems there's SSAUDIT function for logging spreadsheet update, but it's seems to be developed for Essbase add-in and it says in help -
SSAUDIT is not available when using Free-Form reporting in Excel Spreadsheet Add-in.
Free-form reportin (essbase add-in) = Ad-hoc analysis (Smartview)?
We are on version 9.3.1.3
Thanks & best regards,
Annie

Looks like it does work with SmartView per the John's:
http://cn.forums.oracle.com/forums/thread.jspa?threadID=1007130
And here's Glenn saying that it works. Of course he also says, "Never trust what people tell you or even what you read." So maybe a test on your part might be a good idea. See: http://glennschwartzbergs-essbase-blog.blogspot.com/2010/06/never-listen-to-what-people-tell-you-me.html
Regards,
Cameron Lackpour

LiveLinkException [HR#10049]: User is not provisioned for this operation

Hi,
I installed EAL 11.1.1.4.000 on win2008 R2 64bit Japanese OS.
But I met an issue after successful added Analytics Link Server node.
When Adding bridge components to an Analytics Link Server, the error message said as:
"Financial Management Server cannot be added: User is not provisioned for this operation"
and the EAL.log shows:
"LiveLinkException [HR#10049]: User is not provisioned for this operation"
Does it means I did the wrong setting when configure EAL?
Thanks

Have you set up the correct provisioning for the user in Shared Services?
Cheers
John
http://john-goodwin.blogspot.com/

Provision for Smartview

Similar Messages

Maybe you are looking for