Provisioning problem for AD and SAP ABAP Systems
Hi,
We're using IDM 7.20 SP3 and successfully run he Initial Load for AD, NW 7.30 and ERP 6.0 Systems successfully.
But, when I add the priviledge of systems to a new user created via IDM UI, It is not provisioned successfully.
Job Log show the following errors:
[http://imageshack.us/photo/my-images/69/idmerror1.png/|http://imageshack.us/photo/my-images/69/idmerror1.png/]
The detail log is as follow:
JOB: Update context info
Provisioned entries - Successes: 1 Failures:0
MSKey AuditID Status Info
9910 682 OK AALASARLI1
JOB: SYNC
Provisioned entries - Successes: 1 Failures:0
MSKey AuditID Status Info
9910 682 OK 1608
JOB: Set task to error state
Provisioned entries - Successes: 0 Failures:1
MSKey AuditID Status Info
9910 682 FAIL uSkip Called to skip entry
JOB: Skip pending operation
Provisioned entries - Successes: 1 Failures:0
MSKey AuditID Status Info
9910 683 OK not-existing-mskey
JOB: Trigger notification: assignment failure
Messages Warning Executing sap_core_getSkippedOK() got RuntimeException - org.mozilla.javascript.EvaluatorException: uSelect(select top 1 avalue from idmv_value_basic_active where attrname='MX_ATTRIBUTE_VALUE' and mskey=not-existing-mskey) got exception com.microsoft.sqlserver.jdbc.SQLServerException: Incorrect syntax near the keyword 'not'. HINT: Check line 20 in the script sap_core_getSkippedOK
Provisioned entries - Successes: 0 Failures:1
MSKey AuditID Status Info
9910 683 FAIL Failed running function in string "$FUNCTION.sap_setContextVariable(NOTIFICATION_SUBJECT;Assignment failed!!<SKIPPEDOK>=$FUNCTION.sap_core_getSkippedOK()$$;<UIUSER_DISPLAYNAME>=$FUNCTION.sap_getDisplayName(manager)$$)$$". Marking entry as failed. Exceptio
any idea?
Hi,
The entries created when I updated a user (person) and add a priviledge, following entries created in audit table
Task_name Provision_status mcmv_mskey Message mcmv_ProvStatus mcmv_taskid mcmv_privatetask IDStore
Modify Identity OK 1608 NULL 1100 2578 0 2
Provisioning Failed 9911 uSkip Called to skip entry 1101 601 0 2
Pending Operation Failed Failed 9911 Failed running function in string "$FUNCTION.sap_setContextVariable(NOTIFICATION_SUBJECT;Assignment failed!!<SKIPPEDOK>=$FUNCTION.sap_core_getSkippedOK()$$;<UIUSER_DISPLAYNAME>=$FUNCTION.sap_getDisplayName(manager)$$)$$". Marking entry as failed. Exceptio 1101 898 0 2
Similar Messages
-
SAP Abap system as LDAP source/server?
Hello,
is it possible to configure a SAP Abap system as LDAP server so that I can read out the user information via LDAP?
We have a SSL-Gateway that needs to preauthenticate external users and we don't want to manage those users in two different systems.Marc,
Are you thinking about Central User Administration (CUA). Then it is possible by LDAP.
Hope this helps.
Manoj -
Difference between SAP BC ABAP and SAP ABAP Training
What is the basic difference between SAP BC ABAP and SAP ABAP Training ?
Can any one answer these? I am little confused about the learning material I searched on internet and the course provided. It has similar topics but different name. I have course like SAP ABAP ECC 6.0 (TAW10 and TAW12) but on search I also found SAP BC ABAP beside this.Hello
SAP BC means SAP Business Connector
http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5c2a85b11d6b28500508b5d5211/content.htm
http://en.wikipedia.org/wiki/SAP_Business_Connector
So you can know SAP BC ABAP is ABAP for SAP BC
SAP ABAP/4 is a program lanuague
https://en.wikipedia.org/wiki/ABAP
For ABAP certification
TAW10 and 12 are the right materials.
Regards -
What is the difference between SAP HR module and SAP-ABAP-HR?
what is the difference between SAP HR module and SAP-ABAP-HR?
Thanks in advance..:)Hi,
SAP-HR is software component like SAP-BASIS is a component.
Its part of the CORE.
As far as I know there is nothing like SAP-ABAP-HR.
But ABAP offers some special syntax for HR though.
Like INFOTYPES, PROVIDE ENDPROVDIE etc.
Regards,
Sesh -
8.0.2 - problem 1 - unable to scroll screen down or up when the keyboard is present. When typing text, I am unable to see the text I am writing due to this problem. Huge problem for emails and other cloud based providers that allow for data text entry. While the keyboard is present, I am unable to scroll down to see the text, the screen automatically scrolls back up to the top of the screen. We need a fix ASAP!
Have you tried resetting your iPad? You will not lose any data. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
-
Differences between BI Mobile 4.0 for iPad and SAP BO Mobile 3.0
Hi:
What's the difference between BI Mobile 4.0 for iPad and SAP BO Mobile 3.0
I need something licence for BI Mobile 4?
Mobile 4.0 is only for All in one?
I have SAP BO 8.81.
Thanks.
Christian.Hello everybody,
thanks to Deepu I managed to get the iPad app connecting with our BOXI server now, too.
Once again, you need to have/install
>> BOXI 3.1 SP4
>> BOXI 3.1. Mobile Server SP4 ( First I was not aware of this product - be sure to install SP4 for this component as well!)
Having that you find MobileBIService.war within the folder <installation folder>\Business Objects\BusinessObjects Enterprise 12.0\java\applications. Copying this war file to Tomcat's webapps folder should automatically result in the deployment of the corresponding Web application.
One additional remark: I could not open the MobileBIService web application via my browser, i.e. calling the URL http://<server name>:<port number>/MobileBIService/ lead to an error. I ignored this because I guess the web application serves only as a kind of middleware between the app and the "classic" BOXI server.
After deploying the WAR you have a folder <installation folder>\Business Objects\Tocat55\webapps\MobileBIService where you can find the mobi.properties file in subfolder WEB-INF. I let the properties file unchanged, i.e. the only category is "Mobile".
The idea of the categories is, that all Web Intelligence files which are "tagged" with this category can be downloaded/displayed in the iPad app. All other WebI reports are not accessible via iPad.
On iPad I specified <server name>:<port number> as "Server URL", i.e. I did enter nor "http://"neither the name of the web application (MobileBIService), just server name and port number! I specified the "CMS Name" together with the port number (normally 6400), i.e <CMS name>:<port number>.
And then it works...
...finally!
Michael -
Problems with SMD and Non-ABAP EW Alerts
Hi,
Iu2019m installing Solution Manager Diagnostics EhP1. Iu2019ve installed SMD Agent at my satellite systems and created the system and the solution at Solution Manager EhP1 SP21 (SMSY and DSWP transactions), but when I try to execute at Solution Manager Diagnostics (http:<server>:<port>/sld) managed systems -> setup wizard for my managed systems, I got the following error:
u201CNo instances or servers are defined for this system. Please check its definition in SMSY before proceeding to setupu201D
If I try to open up the system I realise that the Landscape collumn is red-rated and shows:
Start checking Technical System 'EPD~JAVA'. (green-rated)
No Hosts found! (red-rated)
The Technical System is not well defined! (red-rated)
Iu2019ve maintained properly SMSY transaction, and defined servers and instances for Application Server Java, EP Content, EP Core and Enterprise Portal.
On the other hand, Iu2019ve followed SAP Note 976054 and itu2019s attached file, which types that I can schedule an EW Alert for Non-ABAP trhough DSWP transaction -> Solution->Solution Reporting->Services->Activities->Scheduling Reporting.
If I schedule the job and try to execute, the job is cancelled and the job log types this:
Date Time Message text Message class Message no. Message type
18.11.2009 14:03:30 Job started 00 516 S
18.11.2009 14:03:30 Step 001 started (program RDSWP_REP_SERVICES, variant , user ID SOLMANADM) 00 550 S
18.11.2009 14:03:30 Table (22x9) exported as attachment 1000000000005; 1.570 bytes DSWP 857 S
18.11.2009 14:03:30 No layouts found 0K 017 E
18.11.2009 14:03:30 Job cancelled after system exception ERROR_MESSAGE 00 564 A
At the same word file, it shows that I can download an XML file wich contain all data required for the service in question and upload it into a service session for direct evaluation.
When I try to go to Managed systems->Scheduler, I notice that this section doesnu2019t appear at my Solution Manager Diagnostics. I only have setup options for Diagnostics system and managed systems.
So I resume my main problems:
1 When I try to setup an managed system I get a pop up u201CNo instances or servers are defined for this system. Please check its definition in SMSY before proceeding to setupu201D
2 When I try to execute SM_REP:XXXXXXX job itu2019s cancelled
3 When I try to get an XML file for direct evaluation, Iu2019m unable to get to the option to execute it.
Please, could you help me?
Thanks in advance and regards,
Tomas.Hello,
When you are clicking on the System in SMSY, do you get a message that this is a dual stack system and gives you a
choice with a dialog that has two buttons to select 'EPD~JAVA' or 'EPD-ABAP'?
Just if you are then you have not defined the system correctly in SMSY
Let me knwo if you get this dialog when you seelct the SID in SMSY.
Did you use the System Landscape Setup Guide to define your technical system?
Regards,
Paul -
Ale transcation data uploading for outbound and in bound system
hi,
can any tell me what is idoc trirrering prgm when we uploading transcational data for invoice in outbound, inbound system. if u have brief information ALE outbound interfaces for transactional data such as invoice and SD send mehi bharathi j
go through these links
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Check these step-by-step links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
regards
Nagesh.Paqruchuri -
Problem while connecting to external ABAP system (on 4.6C rel)
Hi All,
I've created WebDynpro application that is supposed to fetch info about users from several ABAP systems. J2EE engine that runs this WebDynpro is directly connected to one of the ABAP systems. I've successfully created identical Adaptive RFC models, maintained SLD entries for my ABAP systems and configured JCO connections for my WebDynpro through WebDynpro Content Manager (http://<host>:port/webdynpro/welcome). I was able to reach all ABAP systems testing my JCO connections from WebDynpro Content Manager.
The problem I am experiencing is the following:
the application is working fine for the ABAP system that J2EE (where it's executed) is connected to, but failed to reach the remote ABAP system issuing the following message:
"Accessing System <Remote ABAP system> is not possible because RFC Metadata was retrieved using System <ABAP system that J2EE is connected>. Please assure you have configured the RFC Connections properly. A Server restart may be necessary!"
Where else should I have define JCO settings ?
This remote ABAP system is running on 4.6C so I have no options to install J2EE on it or fully configure SLD for that system.
It may seem like a dummy question since I am new to WebDynpro programming.
Thanks in advance,
MikeHi Rich,
Thank you for a quick reply,
Here is what I've done to connect to the remote ABAP system:
1. Configured this remote system in the SLD as a Technical System (SLD=> Technical Landscape).
2. Opened WebDynpro Content Administrator and created two JCO's for my application pointed to that remote ABAP system (defined in SLD). I was able to test them successfully reaching that remote system.
But when I run my application the same error occured.
What did I miss ?
Thanks & Regards,
Mike
Message was edited by: Mykhaylo Puzankev -
What ru the concepts to cover for beginner in sap abap
Hi fr , This is kumar , what ru the concepts to cover for beginner in sap abap
Hi Kumar,
SAP has a certification program for ABAP, according to which following courses are supposed to be covered. If you will try to cover this course, you will be at a level where you can independently program.
<i><b>1. SAP Technologies
-> SAP systems
-> Technical structure of SAP WAS
2. ABAP Workbench Basics
3. Advanced ABAP
4. ABAP Objects
5. ABAP Dictionary
6. List creation techniques(including Object oriented ALV)
7. Dialog Programming
8. Database Changes
9. Enhancements and Modifications
-> Changes to standard SAP system
-> Personalization
-> Enhancements to ABAP Dictionary elements
-> Enhancements via customer exits
-> Business transaction events
-> BADI
-> Modifications</b></i>
Following are some links which will help you to cover above points.
http://www.sap-img.com/F
http://www.sappoint.com/abap.html
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/ranges.htm
http://www.sapdevelopment.co.uk/programs/programsalv.htm
http://www.geocities.com/victorav15/sapr3/abapfun.html
http://abap4.tripod.com/SAP_Functions.html
http://sapr3.tripod.com/abap011.htm
http://abap4.tripod.com/Other_Useful_Tips.html
http://www.sap-img.com/abap/how-to-change-the-development-class.htm
Hope this helps you.
PS If the answer solves your query, plz close the thread by rewarding points to each reply.
Regards -
Problem of installation of SAP Mini System
<b>I bought ABAP Objects textbook. There are CDs containing SAP MINI system. However, I cannot install it on my computer. Dur to error, the installation session was aborted. I am then sending email to ask for information on how to install program on my computer. Here are detail of error.</b>
<i>Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
host 'Noppy' has ip address '192.168.1.33'
Info: CENTRDBINSTANCE_NT_IND SyCheckHostnameLookup 2 217
offical host name for '192.168.1.33' is 'Noppy'.
Error: DBCOMMONDBENV_IND_MSS InternalColdKeyCheck 2 416
Could not find SQL-Server Instance "MSSQLSERVER" on your DB host "Noppy". You must install SAP into the default instance or into a named instance that has the same name as your SAP system (SID).
Info: DBCOMMONDBENV_IND_MSS InternalColdKeyCheck 2 416
You have only installed MS SQL Server Client tools!
Error: DBCOMMONDBENV_IND_MSS ColdKeyCheck 2 416
Phase failed.
Error: Main {} 2 416
Installation aborted.</i>you will get some html page first asking about to install the sap ...
select that option after that if it show some echo off ERROR....
than open the cd and select the install sap.bat file than it will install the sql and than give path of the other cd apart from the kernal cd . -
Password change issue when updating user data in SAP ABAP system
Hi Guru's,
One of my reconciliation tasks part of the reconciliation job I've created is doing some strange password updates.
As you can see below the task selects all users part of my identity store that are part of the account attribute of the particular ABAP system.
Once these users are selected the task updates different data like username, validto, ... but the task is updating a lot of other things that are not part of the destination tab. What is causing the biggest issue is the password fields that are updated in the ABAP system like, password, productive password, ...
Can you please advise if I missed something and how to solve?
Thanks a lot,
LaurentHello Steffi,
Yes in the ABAP systems they have the same timestamp. No other jobs are running at the same time.
It is only happening to a few users depending on the ABAP system. On some ABAP systems there are only a few users for which the PW is reset and other systems 300.
Example below of a system where I updated all user. In my pass only the following attributes should have been pushed thru to the ABAP system.
However the valid from, accounting number and password have been updated as well.
Thx,
Laurent -
Job opprotunities for freshers in SAP - ABAP
Hello People ,
My name is Sashi and i am not sure whether this is the right platform to say this.
" I am fresher completed the training in SAP ABAP/4 recently,looking for a job in the developing career and also i have posted my resume in some of the websites as a fresher, i could sense the there is only requirement for experienced professional and no openings for a fresher.So can any one suggest me if there are any opportunities for a fresher in ABAP/4 as a developer."http://scn.sap.com/docs/DOC-34711
PFL.
Regards
Mahesh -
What is best for my career: Sap ABAP or Sap BI
Hi Experts,
I am Rajesh, done my bachelor degree in Information Technology,
having 4 years of Exp as a Mainframes Programmer in a Banking Software company.
my job containts
30 % understanding the product
40 % Analysis
30 % Programming
my career Goal is to get SAP job in Abroad(US/UK/AUS) for that i am planning like below:
First i want to gain some minimum(8-10 Months) Exp in India by
Choosing one Best(or)Hot Cake Module in SAP, which matches any one of 3 points
1)Currently that module should have more demand less supply.
2)Should have good Future
3)it should not be much vast Because need to expertise Early
I already Trained and good in SAP-Core ABAP,
but just Core ABAP is not enough to get expertise in ABAP, because i need to add it with
OOPS, Webdynpro, Workflow ETC.
even i Trained in all the above, it is difficult to be Expert in 1 YR.
and Hard to get job in US/UK/AUS.
So i am planning to go with SAP-BI for below Reasons
1) SAP BI is not that much Vast compare to ABAP for becoming an Expert on it
2) for Skill Set ABAP+BI, can have good openings
3) SAP-BI is a techno functional Job, where ABAP is not a final Destination.
4) in Future, BI will help to get into HANA.
I request you to guide me, whether my decision towards my Goal is correct or not,
if not, please give valuable Suggestions to reach my destination.
Thanks in Advance,
RajeshHi Rajesh,
as per as your selection of module, its a good mix, but i have a few words that i wants to share with you. Being a developer in sap abap i have come across some points where many indivisuals get strucked by asking what is next.
Started with sap abap you will have many options to go ahead, as you have seen that the combination of BI along with ABAP has an added advantages, and yes later on you can move towards HANA, one of the major sap module in which the database of sap persist in furure.
As far as i concern, if you wants to be in technical stream of sap you will have UI5, Webdynpro, Workflow, BW/ BI, HANA etc, so you may go ahead with these options, but as you have told that you wants to get hands on these things in one year, i think you have to devote in abap as much as possible
what you will require to know the syntax and semantics used in SAP, along with all the stuffs associated with it, once you will get familiar with it, you can play as you wants.
But one thing more is that its not mandatory to have sap abap knowledge to learn other technologies, you can learn without abap, but if yiu have hands on in abap somehow it will boost your future in related technilogies.
So, finally your decision is on right track, what you will need is to get it as your passion. -
SID Problem : could not register two ABAP systems with same SID
Dear Expert:
We have to register two ABAP systems on different host to SLD, and these two systems have same SID.
We use rz70 to do this, but we found the lastest registration will overwrite the previous registration,
that
means we could register them both in the same SLD. (we checked this in Technical system area).
How could we do this? It makes us crazy........
Thanks very much
RayDear Stefan,
Thanks so much for your anwser.
But the dilemma is in one SLD we achieved this, but it is only for one case and we could
not apply this for other systems.
This is the snapshot in our SLD for techical system:
Name Host Version Last Update
D01 on eisdq01 eisdq01 700 2010/12/06 12:45
D01 on eisdv01 eisdv01 640 2010/12/06 11:40
We don't know if this is the illusion that SLD could do this? But for other systems, e.g two Q systems
the lastest registration will overwrite the previsou one.
Thanks very much.
Welcome suggestions from very guru.
Ray
Maybe you are looking for
-
Itunes wants me to setup as new iphone or restore....why?
So last night I plug my iphone 4 in to pc, and for some reason iTunes is now asking me to setup as new phone or restore from backup. My backup is 2 weeks old and Id rather not lose anything recent. Why does itunes think I have a new phone and how can
-
Use the new aluminium keyboard on a PC with Windows XP
Hello all, That post is describing the problems I have when using the new apple aluminium keyboard on a PC using the windows XP keyboard drivers found on the boot camp CD (1.4) This is my first post here so please be kind with me First, let me know i
-
Re: Safari Keeps Quitting Unexpectedly
My Safari keeps quitting driving me crazy i am mac illiterate please help Process: Safari [758] Path: /Applications/Safari.app/Contents/MacOS/Safari Identifier: com.apple.Safari Version: 5.0.3 (5533.19.4) Build Info: WebBrowser-75331904~3 Code Type:
-
Data not getting downloaded to client in MSR2.0
Hi all, We have done all the configuration for MSR2.0 at the backend but only data regarding materials is getting displayed at the client.The rest of the data we r getting till middleware but while syncing it we are not getting anything at the cli
-
Hi: I've a customer with the following config: V880 with 2 x F/C controller ST2540 with 2 x controller Solaris 10 U4 EIS DVD April 09 Storage Foundation 5.0 patched with EIS DVD April 09 For one reason or another, mpxio was not used. I created a 2540