Provisionusers.cmd and Migrate users/groups from Planningweb

Hi
Is the functionality of Provisionusers.cmd and migrateusers/groups from planning web similar?
I feel Provsionsuers.cmd is an alternative way to migrateusers/groups from planning web.
Please correct me if i am wrong.
Thanks and regards
krishnatilak

Hi,
The provisionusers utility basically syncs planning and essbase with the provisioning of users/groups in shared services.
If you run the utility and a user exists in shared services but has not been created in the planning database the user will be added.
If the user does not exist in the essbase security file then they are added.
If it is a user that exists and has security settings on members in planning then these filters are pushed down to essbase.
It should also remove users/groups from planning if they have been deprovisioned in shared services.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Migrate Rpd Catalog and User ,Groups from OBIEE 11.1.1.3.0 to 11.1.1.5.0

hi Guys,
I have got a setup of OBIEE 11.1.1.3.0 on windows 32bit machine and now i am planning to have a setup of 11.1.1.5.0 on windows 64 bit machine.
please tell me the Detailed steps for Migrating the Rpd Catalog and User ,Groups from OBIEE 11.1.1.3.0 to 11.1.1.5.0
Like
1. Do i have to copy the RPD and Catalog Directly to 1.5 or some Upgrade Assistance is to be done
2. If i am Using the Export Provided in the myrelam ( in 1.3) and taking it to obiee 1.5 (as it already contains some inbuilt policies and groups) does it going to give me error
Regards
Ankit

Check the Oracle reference I have provided earlier. Concept goes like this:
Important difference is that upgrading from 10g to 11g is called an "out-of-place upgrade" while upgrading to another 11g is called an "in-place upgrade," because the upgrade operates on existing files. Moving from one 11g release to another 11g release is sometimes referred to as "patching."
http://download.oracle.com/docs/cd/E21764_01/bi.1111/e16452/bi_plan.htm#BABECJJH
Follow patching and not out-of-place upgrade as you are required to upgrade component
http://download.oracle.com/docs/cd/E21764_01/doc.1111/e16793/patch_set_installer.htm#PATCH789
Hope this is clear now

Migrate the users, groups from essbase 7.1.6 to shared services

Hi
Our current production is essbase version 7.1.6 and we are planning to migrate to EPM 11.1.2 . We would like to move the security administration from Essbase to Shared Services (want to use Native Directory).
can somebody please suggest
1) An utility that Oracle provides with EPM 11.1.2 that helps to migrate the users and groups from 7.1.6 to shared services?
2) After bringing the users groups from 7.1.6 to 11.1.2, do we need to externalize these users and groups or no need?
Appreciate the help. Thanks,

if you have LDAP/MSAD try to configure it first .That will get your users
Now using maxl
spool on to GROUP.txt
display gruoup all;
spool on to USER.txt
display user in group all;
for test purpose create a test group and a test user from the shared services.
Now using GROUP.txt
make up maxl statements to create groups(use any advanced text editor or MS excel to get your work done fast)
create group 'groupname';
now login into that shared services
go to FOundation Application group->click sharedservices->drop down native directory ->Right click on Groups and select export for edit.THat will save you Groups.csv file.
Now
1.Open that Groups.csv file
2.Using USER,txt ,paste the users in that file under their respective group.(Look for test group created that should give you an idea!!!)
3.Paste user correctly and save it to the same file Groups.csv
4.go to FOundation Application group->click sharedservices->drop down native directory ->Right click on Groups and select IMPORT for edit.
5.that will get your users into the groups.
________filters_______
Using maxl again
spool on to FILTER.txt
display filter row all;
spool on to GRPRIVILEGE.txt
display privilege group all;
Now using FILTER.txt
create maxl statements
(use any advanced text editor or MS excel to get your work done fast)
Ex: create filter app.database.filtername read/write/none/metaread on 'AREA ' ;
Using GRPRIVILEGE.txt
create maxl statements
grant filter app.databse.filtername to 'groupname';
that should get your filters created and assigned.
else you can use Advanced Security Manger
http://www.appliedolap.com/free-tools/advanced-security-manager
hope that should give you an idea!!!!!!!

Read user groups from realm. Admin rights to each user ??

Greetings to ALL,
I am reading users, groups from realm. If I give the user admin priviliges I am
able to get the information else I get the error weblogic.management.NoAccessRuntimeException:
Access not allowed for subject: principals=[ruser1, B10AP01, B10MP01, B10MP03A,
B10MP03], on ResourceType: Security:Name=myrealmDefaultAuthenticator Action: execute,
Target: listGroups
Is there more effective way to read the information.
I can execute the program standalone ( from DOS PROMPT) and read all information
if I do the following
adminHome = (MBeanHome) Helper.getAdminMBeanHome (username,password,url);
But when calling from the application I get the above error.
Any code, suggestion will be very helpful.
Fred

"Fred Boon" <[email protected]> wrote in message
news:3fa7cb98$[email protected]..
>
Greetings to ALL,
I am reading users, groups from realm. If I give the user admin priviligesI am
able to get the information else I get the errorweblogic.management.NoAccessRuntimeException:
Access not allowed for subject: principals=[ruser1, B10AP01, B10MP01,
B10MP03A,> B10MP03, on ResourceType: Security:Name=myrealmDefaultAuthenticatorAction: execute,
Target: listGroups
Is there more effective way to read the information.
Commo mbeans require admin role in order to be able to invoke methods.
I can execute the program standalone ( from DOS PROMPT) and read allinformation
if I do the following
adminHome = (MBeanHome) Helper.getAdminMBeanHome (username,password,url);
But when calling from the application I get the above error.
Try doing a runAs with a subject that has admin role.

Cannot view the folder security after removed the default "users" group from folder

Hi guys
Due to the domain change, I am doing a windows 2003 server migration to windows 2012 for a file server.
Tones of data have been copied from the old 2003 server to the new setup 2012 server.
We need remove the "builtin\users" group from the folder security to maintain correct rights access of user to network folder.
Once the "builtin\users" group has been removed, the account in domain admin group can no longer read the folder security.
Has anyone faced the similar situation?
Or, is there any change in folder security rights of Windows 2012?
Thanks in advance
KC@ITL

Hi,
Glad to hear that the issue has been resolved.
If you need any assistance in the future, please do not hesitate to post in our forum.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How to find screen group and subsequent screen group from program number

Hi all there,
Can anybody tell me how to find out screen group and subsequent screen group from program number.
I need it to find next screen number in VF01 transaction
I am doing recording in VF01 after entering delivery number which is on screen number 0102 and pressing enter sometime it goes to screen number 0103 and sometime it goes to screen number 0104
I wanted to find out on what condition it goes to these screen
Regards
Sagar

hi,
for konwing the screen flow you ...just use the press (ctrlshiftF5) now you will get the flow ...now just click on screen number 102 then go inside the PAI by double clicking on user command...
search for screen numbers 103 or 104 now check on what condition it will get tirrgered..
with regrads
janani

Sharepoint 2010 get User Groups from specific site

Hello,
I was able to get all User groups from entire site Collection.
But instead of getting user groups from entire site, I want read user groups only from one specified sub site.
Please help!
Thanks

Assuming you have an SPWeb object named "web", example:
SPSite site = new SPSite(http://yourdomain/sites/yoursite);
SPWeb web = site.OpenWeb("mysubsite/subsbusite");
web.Groups will return a collection of SPGroup objects for the current subsite. If this subsite inherits permissions from a parent site (web.HasUniquePerm = False), the list is the same as the Groups property of the parent site.
SPWeb.Groups:
http://msdn.microsoft.com/en-us/library/office/microsoft.sharepoint.spweb.groups(v=office.15).aspx
SPGroup:
http://msdn.microsoft.com/en-us/library/office/microsoft.sharepoint.spgroup(v=office.15).aspx
You would be better results by posting coding questions in "SharePoint 2010 - Development and Programming" instead of "SharePoint 2010 - General Discussions and Questions".
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner

What is difference between user group and reference user group?

hi
guys,
what is difference between user group and reference user group?
your regards
p.suresh

Hi ,
Chk the link below for your clarifiacation.
http://help.sap.com/erp2005_ehp_03/helpdata/EN/5c/c1c81c445f11d189f00000e81ddfac/frameset.htm
Hope it helps.
Regards,
Amit
Edited by: Amit Kotwani on Sep 2, 2008 2:15 PM

I bought a new Mac Pro and migrated my FCP from my old one. But the new old won't accept my product serial number. Help!

I bought a new Mac Pro and migrated my FCP from my old one. But the new old won't accept my product serial number. Help!

Was the FCS on your old machine an upgrade? You will need to enter your original, full version serial first, and then you will be prompted for the upgrade serial number.
Hope this helps.
MtD

Higher Education and Research User Group Meeting 2009 - Presentations

All,
please note the new blog on the BPX for Higher Education entry page. It provides the link to the presentations shown at the Higher Education and Research User Group (HERUG) Meeting of this year. In addition the event schedule informs about the planned 2010 User Group Meeting in Singapore.
http://www.sdn.sap.com/irj/bpx/highered
Tina
Edited by: Tina Bach on Nov 16, 2009 3:31 PM

Ray.R wrote:
When we did ours in Ottawa, we had Laura place it on top during the week of the meeting.
And by having people like us post to this thread, it keeps bumping it up.
pssst... Ray, its up there already! She is everywhere!
Thank you Laura!
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Defference between usergroup and reference user group

Hi,
Please any one tell me the defference between usergroup and reference user group.
Thanks,
hcm

Please make use of forum search.
Donnie

Migrating User Groups

I successfully migrated the GDS and Database from ES to ES2. However, I am unable to retain the user groups created in DefaultDom.
The migration was a fresh install of ES2 with the ES database and GDS. Is there a way to migrate the uer settings?
Aditya

Check the Oracle reference I have provided earlier. Concept goes like this:
Important difference is that upgrading from 10g to 11g is called an "out-of-place upgrade" while upgrading to another 11g is called an "in-place upgrade," because the upgrade operates on existing files. Moving from one 11g release to another 11g release is sometimes referred to as "patching."
http://download.oracle.com/docs/cd/E21764_01/bi.1111/e16452/bi_plan.htm#BABECJJH
Follow patching and not out-of-place upgrade as you are required to upgrade component
http://download.oracle.com/docs/cd/E21764_01/doc.1111/e16793/patch_set_installer.htm#PATCH789
Hope this is clear now

Migrating Users & Data from a Powerbook G4 to a MBP

OK, I'm getting a refurb. MBP and I'm going to need to transfer over my stuff from the Powerbook G4 to the MBP. The thing is...both my 400 and 800 FW ports in the Powerbook have ceased to function, so Target Disk Mode will not work for me. I could use the Ethernet form of transfer to get everything over but that implies that the MBP will have to be up and running and have it's network settings all configured in order for it to be "seen" on the network. Is this the case? Or, upon startup of the MacBoook Pro, will I be prompted to migrate data & users via Ethernet?
In the past, I've been able to use Target Disk Mode and I'm familiar with that procedure, I just don't know what to expect via an Ethernet migration. Can anyone enlighten me?
Thanks

A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009
Connect the two computers via FireWire to do any data transfer whether manually or with Migration Assistant.

Help with migrating user data from one account to another

I am on a G5 with 10.4.11. I installed FCP studio 6 and everything works fine except compressor. I have had only one user account on this mac (i will call it account 1). I was told to create another account (account 2), log on and see if compressor works. It does. Basically there are files missing on account 1 and compressor won't run. I have installed 3 times and no change.
Anyway I was told to migrate all my user data from account 1 to account 2. I have been looking at threads and want to make sure I am doing the right thing. I found a way to close. Please see if this works. IT may be from the tiger forum:
pick a short user name for your new account. then run the following terminal commands
sudo mkdir /users/newshortname
sudo ditto ~ /users/newshortname
You'll have to enter your admin password (which you won't see) after the first command. that's normal. This will copy your current home directory to /users/newshortname. Then go to system preferences->accounts and create a new account with the short name newshortname. You'll get a popup saying that a home directory by that name already exists and asking if you want to use it. say yes.
Anyway, I would like to migrate everything from account 1 to 2 and have all preferences...everything. I would also like to be able to delete the old account...account 1 and rename account 2. Since this is a home MAC, I really don't need it PW protected. I would like this MAC to just use my new account 2 at start up.
Please ask me any questions. This is my editing MAC, and I can't get around inside the OS. I know FCP like the back of my hand, but don't want to screw up this computer.
Thanks in advance.
Message was edited by: Nelson May

Yeah, you should be able to move most of it by changing permissions.
Network settings could be any/all of these though for instance...
/Users/YourUserName/Library/Preferences/ByHost/com.apple.networkConnect.<12 digit number>.plist
/Users/YourUserName/Library/Preferences/com.apple.internetconnect.plist
/Library/Preferences/SystemConfiguration/preferences.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
/Library/Preferences/com.apple.sharing.firewall.plist
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
/Library/Preferences/com.apple.networkConfig.plist
/Library/Preferences/SystemConfiguration/com.apple.nat.plist
/Library/Preferences/com.apple.print.FaxPrefs.plist
As well as the old Keychain & cookies from your Browser.

Importing users & groups from one OID to another

I was wondering what's the fastest and most efficient way of exporting all users, groups, classes & attributes from one OID server and importing them into another OID server. In another way i just need to synchronize both OID servers with the same data. what's the fastest and best way to achieve that please?

Just use the gray installer discs that came with one of the computers.
Note that you must then remove from the first computer as you have only a license for one computer.

Provisionusers.cmd and Migrate users/groups from Planningweb

Similar Messages

Maybe you are looking for